Skip to content

L
linux
Commit 9d2743f8 authored by Takashi Iwai's avatar Takashi Iwai
Browse files
Options

Merge branch 'topic/cmi8330' into for-linus 

* topic/cmi8330:
  ALSA: cmi8330: Allow MPU-401-less operation
  ALSA: cmi8330: find OPL3 port automatically
  cmi8330: Add basic CMI8329 support
  ALSA: cmi8330: revert comments about AD1848 back
parents d0064a1b 72b43cf1
Show whitespace changes
Inline Side-by-side
Showing with 52 additions and 34 deletions
sound/isa/cmi8330.c
View file @ 9d2743f8
/*
* Driver for C-Media's CMI8330 soundcards.
* Driver for C-Media's CMI8330 and CMI8329 soundcards.
* Copyright (c) by George Talusan <gstalusan@uwaterloo.ca>
* http://www.undergrad.math.uwaterloo.ca/~gstalusa
*
......@@ -35,7 +35,7 @@
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
* The driver "magically" routes the capturing to the CMI8330 codec,
* The driver "magically" routes the capturing to the AD1848 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
......@@ -64,7 +64,7 @@
/*
*/
MODULE_AUTHOR("George Talusan <gstalusan@uwaterloo.ca>");
MODULE_DESCRIPTION("C-Media CMI8330");
MODULE_DESCRIPTION("C-Media CMI8330/CMI8329");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}");
......@@ -86,38 +86,38 @@ static long mpuport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard.");
MODULE_PARM_DESC(index, "Index value for CMI8330/CMI8329 soundcard.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for CMI8330 soundcard.");
MODULE_PARM_DESC(id, "ID string for CMI8330/CMI8329 soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable CMI8330 soundcard.");
MODULE_PARM_DESC(enable, "Enable CMI8330/CMI8329 soundcard.");
#ifdef CONFIG_PNP
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
module_param_array(sbport, long, NULL, 0444);
MODULE_PARM_DESC(sbport, "Port # for CMI8330 SB driver.");
MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver.");
module_param_array(sbirq, int, NULL, 0444);
MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330 SB driver.");
MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma8, int, NULL, 0444);
MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330 SB driver.");
MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma16, int, NULL, 0444);
MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330 SB driver.");
MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver.");
module_param_array(wssport, long, NULL, 0444);
MODULE_PARM_DESC(wssport, "Port # for CMI8330 WSS driver.");
MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssirq, int, NULL, 0444);
MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver.");
MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssdma, int, NULL, 0444);
MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver.");
module_param_array(fmport, long, NULL, 0444);
MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver.");
MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver.");
module_param_array(mpuport, long, NULL, 0444);
MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver.");
MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver.");
module_param_array(mpuirq, int, NULL, 0444);
MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port.");
MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
......@@ -156,6 +156,11 @@ static unsigned char snd_cmi8330_image[((CMI8330_CDINGAIN)-16) + 1] =
typedef int (*snd_pcm_open_callback_t)(struct snd_pcm_substream *);
enum card_type {
CMI8330,
CMI8329
};
struct snd_cmi8330 {
#ifdef CONFIG_PNP
struct pnp_dev *cap;
......@@ -172,11 +177,14 @@ struct snd_cmi8330 {
snd_pcm_open_callback_t open;
void *private_data; /* sb or wss */
} streams[2];
enum card_type type;
};
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = {
{ .id = "CMI0001", .devs = { { "@X@0001" }, { "@@@0001" }, { "@H@0001" }, { "A@@0001" } } },
{ .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
{ .id = "" }
};
......@@ -304,7 +312,7 @@ static int __devinit snd_cmi8330_mixer(struct snd_card *card, struct snd_cmi8330
unsigned int idx;
int err;
strcpy(card->mixername, "CMI8330/C3D");
strcpy(card->mixername, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) {
err = snd_ctl_add(card,
......@@ -329,6 +337,9 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
struct pnp_dev *pdev;
int err;
/* CMI8329 has a device with ID A@@0001, CMI8330 does not */
acard->type = (id->devs[3].id[0]) ? CMI8329 : CMI8330;
acard->cap = pnp_request_card_device(card, id->devs[0].id, NULL);
if (acard->cap == NULL)
return -EBUSY;
......@@ -345,12 +356,13 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
err = pnp_activate_dev(pdev);
if (err < 0) {
snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
snd_printk(KERN_ERR "AD1848 PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
wssdma[dev] = pnp_dma(pdev, 0);
wssirq[dev] = pnp_irq(pdev, 0);
if (pnp_port_start(pdev, 1))
fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
......@@ -358,25 +370,31 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
err = pnp_activate_dev(pdev);
if (err < 0) {
snd_printk(KERN_ERR "CMI8330/C3D (SB16) PnP configure failure\n");
snd_printk(KERN_ERR "SB16 PnP configure failure\n");
return -EBUSY;
}
sbport[dev] = pnp_port_start(pdev, 0);
sbdma8[dev] = pnp_dma(pdev, 0);
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
/* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
if (fmport[dev] == SNDRV_AUTO_PORT) {
if (pnp_port_start(pdev, 1))
fmport[dev] = pnp_port_start(pdev, 1);
else
fmport[dev] = 0x388; /* Or hardwired */
}
/* allocate MPU-401 resources */
pdev = acard->mpu;
err = pnp_activate_dev(pdev);
if (err < 0) {
snd_printk(KERN_ERR
"CMI8330/C3D (MPU-401) PnP configure failure\n");
return -EBUSY;
}
if (err < 0)
snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n");
else {
mpuport[dev] = pnp_port_start(pdev, 0);
mpuirq[dev] = pnp_irq(pdev, 0);
}
return 0;
}
#endif
......@@ -430,9 +448,9 @@ static int __devinit snd_cmi8330_pcm(struct snd_card *card, struct snd_cmi8330 *
snd_cmi8330_capture_open
};
if ((err = snd_pcm_new(card, "CMI8330", 0, 1, 1, &pcm)) < 0)
if ((err = snd_pcm_new(card, (chip->type == CMI8329) ? "CMI8329" : "CMI8330", 0, 1, 1, &pcm)) < 0)
return err;
strcpy(pcm->name, "CMI8330");
strcpy(pcm->name, (chip->type == CMI8329) ? "CMI8329" : "CMI8330");
pcm->private_data = chip;
/* SB16 */
......@@ -527,11 +545,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
snd_printk(KERN_ERR PFX "AD1848 device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
snd_printk(KERN_ERR PFX "AD1848 not found during probe\n");
return -ENODEV;
}
......@@ -541,11 +559,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
sbdma8[dev],
sbdma16[dev],
SB_HW_AUTO, &acard->sb)) < 0) {
snd_printk(KERN_ERR PFX "(SB16) device busy??\n");
snd_printk(KERN_ERR PFX "SB16 device busy??\n");
return err;
}
if (acard->sb->hardware != SB_HW_16) {
snd_printk(KERN_ERR PFX "(SB16) not found during probe\n");
snd_printk(KERN_ERR PFX "SB16 not found during probe\n");
return err;
}
......@@ -585,8 +603,8 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
mpuport[dev]);
}
strcpy(card->driver, "CMI8330/C3D");
strcpy(card->shortname, "C-Media CMI8330/C3D");
strcpy(card->driver, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
strcpy(card->shortname, (acard->type == CMI8329) ? "C-Media CMI8329" : "C-Media CMI8330/C3D");
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
card->shortname,
acard->wss->port,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7