[ATM]: [drivers] kill pointless NULL checks and casts before kfree()

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/atm/fore200e.c

@@ -383,7 +383,6 @@ fore200e_shutdown(struct fore200e* fore200e)
     switch(fore200e->state) {
 
     case FORE200E_STATE_COMPLETE:
-	if (fore200e->stats)
 	kfree(fore200e->stats);
 
     case FORE200E_STATE_IRQ:
@@ -963,7 +962,6 @@ fore200e_tx_irq(struct fore200e* fore200e)
 		entry, txq->tail, entry->vc_map, entry->skb);
 
 	/* free copy of misaligned data */
-	if (entry->data)
 	kfree(entry->data);
 	
 	/* remove DMA mapping */

drivers/atm/he.c

@@ -412,7 +412,6 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
 init_one_failure:
 	if (atm_dev)
 		atm_dev_deregister(atm_dev);
-	if (he_dev)
 	kfree(he_dev);
 	pci_disable_device(pci_dev);
 	return err;
@@ -2534,7 +2533,6 @@ he_open(struct atm_vcc *vcc)
 open_failed:
 
 	if (err) {
-		if (he_vcc)
 		kfree(he_vcc);
 		clear_bit(ATM_VF_ADDR, &vcc->flags);
 	}

drivers/atm/nicstar.c

@@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
    PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base);
       
    /* Initialize SCQ0, the only VBR SCQ used */
-   card->scq1 = (scq_info *) NULL;
-   card->scq2 = (scq_info *) NULL;
+   card->scq1 = NULL;
+   card->scq2 = NULL;
    card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0);
-   if (card->scq0 == (scq_info *) NULL)
+   if (card->scq0 == NULL)
    {
       printk("nicstar%d: can't get SCQ0.\n", i);
       error = 12;
@@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd)
    int i;
 
    if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
-      return (scq_info *) NULL;
+      return NULL;
 
    scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
-   if (scq == (scq_info *) NULL)
-      return (scq_info *) NULL;
+   if (scq == NULL)
+      return NULL;
    scq->org = kmalloc(2 * size, GFP_KERNEL);
    if (scq->org == NULL)
    {
       kfree(scq);
-      return (scq_info *) NULL;
+      return NULL;
    }
    scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
                                           (size / NS_SCQE_SIZE), GFP_KERNEL);
-   if (scq->skb == (struct sk_buff **) NULL)
+   if (scq->skb == NULL)
    {
       kfree(scq->org);
       kfree(scq);
-      return (scq_info *) NULL;
+      return NULL;
    }
    scq->num_entries = size / NS_SCQE_SIZE;
    scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size);
@@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc)
          vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE;
 
          scq = get_scq(CBR_SCQSIZE, vc->cbr_scd);
-         if (scq == (scq_info *) NULL)
+         if (scq == NULL)
          {
             PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index);
             card->scd2vc[frscdi] = NULL;

drivers/atm/zatm.c

@@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc)
 		zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
 		dealloc_shaper(vcc->dev,zatm_vcc->shaper);
 	}
-	if (zatm_vcc->ring) kfree(zatm_vcc->ring);
+	kfree(zatm_vcc->ring);
 }
 
 
@@ -1339,11 +1339,8 @@ static int __init zatm_start(struct atm_dev *dev)
 	return 0;
     out:
 	for (i = 0; i < NR_MBX; i++)
-		if (zatm_dev->mbx_start[i] != 0)
-			kfree((void *) zatm_dev->mbx_start[i]);
-	if (zatm_dev->rx_map != NULL)
+		kfree(zatm_dev->mbx_start[i]);
 	kfree(zatm_dev->rx_map);
-	if (zatm_dev->tx_map != NULL)
 	kfree(zatm_dev->tx_map);
 	free_irq(zatm_dev->irq, dev);
 	return error;