leds: LED driver for Intel NAS SS4200 series (v5)

This code is based on a driver that came in the "Open-source
and GPL components" download here:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Storage+Systems&ProductProduct=Intel%C2%AE+Entry+Storage+System+SS4200-E&OSVersion=OS+Independent

It was in a file called nasgpio.c inside of a second zip file
called SS4200-E_Linux_SIO_Driver-v1.4.zip and is based on this
updated to use the LED subsystem with the ioctl and hardware
monitor support removed.

I don't have any need for brightness
control, and its code is *completely* separate from the on/off
controls implemented here.  If anyone else wants it, I'd be
happy to look into adding it, but I don't care enough for now.

Except for the probe routines, I rewrote most of it.  I also
Note that I don't have any hardware documentation except for
the original driver.

Thanks go to Arjan for his help in getting the original source
for this released and for chasing down some licensing issues.
Signed-off-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

drivers/leds/Kconfig

@@ -236,6 +236,15 @@ config LEDS_BD2802
 	  This option enables support for BD2802GU RGB LED driver chips
 	  accessed via the I2C bus.
 
+config LEDS_INTEL_SS4200
+	tristate "LED driver for Intel NAS SS4200 series"
+	depends on LEDS_CLASS && PCI && DMI
+	help
+	  This option enables support for the Intel SS4200 series of
+	  Network Attached Storage servers.  You may control the hard
+	  drive or power LEDs on the front panel.  Using this driver
+	  can stop the front LED from blinking after startup.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS

drivers/leds/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
 obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
+obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o