rapidio: add support for IDT CPS Gen2 switches

Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616
Gen2 devices.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rapidio/switches/Kconfig

@@ -20,6 +20,13 @@ config RAPIDIO_TSI568
 	---help---
 	  Includes support for IDT Tsi568 serial RapidIO switch.
 
+config RAPIDIO_CPS_GEN2
+	bool "IDT CPS Gen.2 SRIO switch support"
+	depends on RAPIDIO
+	default n
+	---help---
+	  Includes support for ITD CPS Gen.2 serial RapidIO switches.
+
 config RAPIDIO_TSI500
 	bool "Tsi500 Parallel RapidIO switch support"
 	depends on RAPIDIO

drivers/rapidio/switches/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_RAPIDIO_TSI57X)	+= tsi57x.o
 obj-$(CONFIG_RAPIDIO_CPS_XX)	+= idtcps.o
 obj-$(CONFIG_RAPIDIO_TSI568)	+= tsi568.o
 obj-$(CONFIG_RAPIDIO_TSI500)	+= tsi500.o
+obj-$(CONFIG_RAPIDIO_CPS_GEN2)	+= idt_gen2.o
 
 ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG

drivers/rapidio/switches/idt_gen2.c

+/*
+ * IDT CPS Gen.2 Serial RapidIO switch family support
+ *
+ * Copyright 2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+#define LOCAL_RTE_CONF_DESTID_SEL	0x010070
+#define LOCAL_RTE_CONF_DESTID_SEL_PSEL	0x0000001f
+
+#define IDT_LT_ERR_REPORT_EN	0x03100c
+
+#define IDT_PORT_ERR_REPORT_EN(n)	(0x031044 + (n)*0x40)
+#define IDT_PORT_ERR_REPORT_EN_BC	0x03ff04
+
+#define IDT_PORT_ISERR_REPORT_EN(n)	(0x03104C + (n)*0x40)
+#define IDT_PORT_ISERR_REPORT_EN_BC	0x03ff0c
+#define IDT_PORT_INIT_TX_ACQUIRED	0x00000020
+
+#define IDT_LANE_ERR_REPORT_EN(n)	(0x038010 + (n)*0x100)
+#define IDT_LANE_ERR_REPORT_EN_BC	0x03ff10
+
+#define IDT_DEV_CTRL_1		0xf2000c
+#define IDT_DEV_CTRL_1_GENPW		0x02000000
+#define IDT_DEV_CTRL_1_PRSTBEH		0x00000001
+
+#define IDT_CFGBLK_ERR_CAPTURE_EN	0x020008
+#define IDT_CFGBLK_ERR_REPORT		0xf20014
+#define IDT_CFGBLK_ERR_REPORT_GENPW		0x00000002
+
+#define IDT_AUX_PORT_ERR_CAP_EN	0x020000
+#define IDT_AUX_ERR_REPORT_EN	0xf20018
+#define IDT_AUX_PORT_ERR_LOG_I2C	0x00000002
+#define IDT_AUX_PORT_ERR_LOG_JTAG	0x00000001
+
+#define	IDT_ISLTL_ADDRESS_CAP	0x021014
+
+#define IDT_RIO_DOMAIN		0xf20020
+#define IDT_RIO_DOMAIN_MASK		0x000000ff
+
+#define IDT_PW_INFO_CSR		0xf20024
+
+#define IDT_SOFT_RESET		0xf20040
+#define IDT_SOFT_RESET_REQ		0x00030097
+
+#define IDT_I2C_MCTRL		0xf20050
+#define IDT_I2C_MCTRL_GENPW		0x04000000
+
+#define IDT_JTAG_CTRL		0xf2005c
+#define IDT_JTAG_CTRL_GENPW		0x00000002
+
+#define IDT_LANE_CTRL(n)	(0xff8000 + (n)*0x100)
+#define IDT_LANE_CTRL_BC	0xffff00
+#define IDT_LANE_CTRL_GENPW		0x00200000
+#define IDT_LANE_DFE_1_BC	0xffff18
+#define IDT_LANE_DFE_2_BC	0xffff1c
+
+#define IDT_PORT_OPS(n)		(0xf40004 + (n)*0x100)
+#define IDT_PORT_OPS_GENPW		0x08000000
+#define IDT_PORT_OPS_PL_ELOG		0x00000040
+#define IDT_PORT_OPS_LL_ELOG		0x00000020
+#define IDT_PORT_OPS_LT_ELOG		0x00000010
+#define IDT_PORT_OPS_BC		0xf4ff04
+
+#define IDT_PORT_ISERR_DET(n)	(0xf40008 + (n)*0x100)
+
+#define IDT_ERR_CAP		0xfd0000
+#define IDT_ERR_CAP_LOG_OVERWR		0x00000004
+
+#define IDT_ERR_RD		0xfd0004
+
+#define IDT_DEFAULT_ROUTE	0xde
+#define IDT_NO_ROUTE		0xdf
+
+static int
+idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	/*
+	 * Select routing table to update
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	/*
+	 * Program destination port for the specified destID
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				  (u32)route_destid);
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				  (u32)route_port);
+	udelay(10);
+
+	return 0;
+}
+
+static int
+idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	/*
+	 * Select routing table to read
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				  route_destid);
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+	if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
+		*route_port = RIO_INVALID_ROUTE;
+	else
+		*route_port = (u8)result;
+
+	return 0;
+}
+
+static int
+idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+
+	/*
+	 * Select routing table to read
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	for (i = RIO_STD_RTE_CONF_EXTCFGEN;
+	     i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+		rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_STD_RTE_CONF_PORT_SEL_CSR,
+			(IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
+			(IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
+		i += 4;
+	}
+
+	return 0;
+}
+
+
+static int
+idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  IDT_RIO_DOMAIN, (u32)sw_domain);
+	return 0;
+}
+
+static int
+idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				IDT_RIO_DOMAIN, &regval);
+
+	*sw_domain = (u8)(regval & 0xff);
+
+	return 0;
+}
+
+static int
+idtg2_em_init(struct rio_dev *rdev)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 regval;
+	int i, tmp;
+
+	/*
+	 * This routine performs device-specific initialization only.
+	 * All standard EM configuration should be performed at upper level.
+	 */
+
+	pr_debug("RIO: %s [%d:%d]\n", __func__, destid, hopcount);
+
+	/* Set Port-Write info CSR: PRIO=3 and CRF=1 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_PW_INFO_CSR, 0x0000e000);
+
+	/*
+	 * Configure LT LAYER error reporting.
+	 */
+
+	/* Enable standard (RIO.p8) error reporting */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_LT_ERR_REPORT_EN,
+			REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
+			REM_LTL_ERR_UNSUPTR);
+
+	/* Use Port-Writes for LT layer error reporting.
+	 * Enable per-port reset
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+			IDT_DEV_CTRL_1, &regval);
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_DEV_CTRL_1,
+			regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
+
+	/*
+	 * Configure PORT error reporting.
+	 */
+
+	/* Report all RIO.p8 errors supported by device */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
+
+	/* Configure reporting of implementation specific errors/events */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_PORT_ISERR_REPORT_EN_BC, IDT_PORT_INIT_TX_ACQUIRED);
+
+	/* Use Port-Writes for port error reporting and enable error logging */
+	tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+	for (i = 0; i < tmp; i++) {
+		rio_mport_read_config_32(mport, destid, hopcount,
+				IDT_PORT_OPS(i), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
+				IDT_PORT_OPS_PL_ELOG |
+				IDT_PORT_OPS_LL_ELOG |
+				IDT_PORT_OPS_LT_ELOG);
+	}
+	/* Overwrite error log if full */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
+
+	/*
+	 * Configure LANE error reporting.
+	 */
+
+	/* Disable line error reporting */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_LANE_ERR_REPORT_EN_BC, 0);
+
+	/* Use Port-Writes for lane error reporting (when enabled)
+	 * (do per-lane update because lanes may have different configuration)
+	 */
+	tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
+	for (i = 0; i < tmp; i++) {
+		rio_mport_read_config_32(mport, destid, hopcount,
+				IDT_LANE_CTRL(i), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				IDT_LANE_CTRL(i), regval | IDT_LANE_CTRL_GENPW);
+	}
+
+	/*
+	 * Configure AUX error reporting.
+	 */
+
+	/* Disable JTAG and I2C Error capture */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_AUX_PORT_ERR_CAP_EN, 0);
+
+	/* Disable JTAG and I2C Error reporting/logging */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_AUX_ERR_REPORT_EN, 0);
+
+	/* Disable Port-Write notification from JTAG */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_JTAG_CTRL, 0);
+
+	/* Disable Port-Write notification from I2C */
+	rio_mport_read_config_32(mport, destid, hopcount,
+			IDT_I2C_MCTRL, &regval);
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_I2C_MCTRL,
+			regval & ~IDT_I2C_MCTRL_GENPW);
+
+	/*
+	 * Configure CFG_BLK error reporting.
+	 */
+
+	/* Disable Configuration Block error capture */
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_CFGBLK_ERR_CAPTURE_EN, 0);
+
+	/* Disable Port-Writes for Configuration Block error reporting */
+	rio_mport_read_config_32(mport, destid, hopcount,
+			IDT_CFGBLK_ERR_REPORT, &regval);
+	rio_mport_write_config_32(mport, destid, hopcount,
+			IDT_CFGBLK_ERR_REPORT,
+			regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
+
+	/* set TVAL = ~50us */
+	rio_mport_write_config_32(mport, destid, hopcount,
+		rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+
+	return 0;
+}
+
+static int
+idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 regval, em_perrdet, em_ltlerrdet;
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+		rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+	if (em_ltlerrdet) {
+		/* Service Logical/Transport Layer Error(s) */
+		if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
+			/* Implementation specific error reported */
+			rio_mport_read_config_32(mport, destid, hopcount,
+					IDT_ISLTL_ADDRESS_CAP, &regval);
+
+			pr_debug("RIO: %s Implementation Specific LTL errors" \
+				 " 0x%x @(0x%x)\n",
+				 rio_name(rdev), em_ltlerrdet, regval);
+
+			/* Clear implementation specific address capture CSR */
+			rio_mport_write_config_32(mport, destid, hopcount,
+					IDT_ISLTL_ADDRESS_CAP, 0);
+
+		}
+	}
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+		rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+	if (em_perrdet) {
+		/* Service Port-Level Error(s) */
+		if (em_perrdet & REM_PED_IMPL_SPEC) {
+			/* Implementation Specific port error reported */
+
+			/* Get IS errors reported */
+			rio_mport_read_config_32(mport, destid, hopcount,
+					IDT_PORT_ISERR_DET(portnum), &regval);
+
+			pr_debug("RIO: %s Implementation Specific Port" \
+				 " errors 0x%x\n", rio_name(rdev), regval);
+
+			/* Clear all implementation specific events */
+			rio_mport_write_config_32(mport, destid, hopcount,
+					IDT_PORT_ISERR_DET(portnum), 0);
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t
+idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	ssize_t len = 0;
+	u32 regval;
+
+	while (!rio_mport_read_config_32(mport, destid, hopcount,
+					 IDT_ERR_RD, &regval)) {
+		if (!regval)    /* 0 = end of log */
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len,
+					"%08x\n", regval);
+		if (len >= (PAGE_SIZE - 10))
+			break;
+	}
+
+	return len;
+}
+
+static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
+
+static int idtg2_sysfs(struct rio_dev *rdev, int create)
+{
+	struct device *dev = &rdev->dev;
+	int err = 0;
+
+	if (create == RIO_SW_SYSFS_CREATE) {
+		/* Initialize sysfs entries */
+		err = device_create_file(dev, &dev_attr_errlog);
+		if (err)
+			dev_err(dev, "Unable create sysfs errlog file\n");
+	} else
+		device_remove_file(dev, &dev_attr_errlog);
+
+	return err;
+}
+
+static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = idtg2_route_add_entry;
+	rdev->rswitch->get_entry = idtg2_route_get_entry;
+	rdev->rswitch->clr_table = idtg2_route_clr_table;
+	rdev->rswitch->set_domain = idtg2_set_domain;
+	rdev->rswitch->get_domain = idtg2_get_domain;
+	rdev->rswitch->em_init = idtg2_em_init;
+	rdev->rswitch->em_handle = idtg2_em_handler;
+	rdev->rswitch->sw_sysfs = idtg2_sysfs;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init);

include/linux/rio_ids.h

@@ -34,5 +34,7 @@
 #define RIO_DID_IDTCPS16		0x035b
 #define RIO_DID_IDTCPS6Q		0x035f
 #define RIO_DID_IDTCPS10Q		0x035e
+#define RIO_DID_IDTCPS1848		0x0374
+#define RIO_DID_IDTCPS1616		0x0379
 
 #endif				/* LINUX_RIO_IDS_H */

include/linux/rio_regs.h

@@ -161,6 +161,7 @@
 #define RIO_COMPONENT_TAG_CSR	0x6c	/* [III] Component Tag CSR */
 
 #define RIO_STD_RTE_CONF_DESTID_SEL_CSR	0x70
+#define  RIO_STD_RTE_CONF_EXTCFGEN		0x80000000
 #define RIO_STD_RTE_CONF_PORT_SEL_CSR	0x74
 #define RIO_STD_RTE_DEFAULT_PORT	0x78
 
@@ -265,6 +266,10 @@
 #define RIO_EM_EFB_HEADER	0x000	/* Error Management Extensions Block Header */
 #define RIO_EM_LTL_ERR_DETECT	0x008	/* Logical/Transport Layer Error Detect CSR */
 #define RIO_EM_LTL_ERR_EN	0x00c	/* Logical/Transport Layer Error Enable CSR */
+#define  REM_LTL_ERR_ILLTRAN		0x08000000 /* Illegal Transaction decode */
+#define  REM_LTL_ERR_UNSOLR		0x00800000 /* Unsolicited Response */
+#define  REM_LTL_ERR_UNSUPTR		0x00400000 /* Unsupported Transaction */
+#define  REM_LTL_ERR_IMPSPEC		0x000000ff /* Implementation Specific */
 #define RIO_EM_LTL_HIADDR_CAP	0x010	/* Logical/Transport Layer High Address Capture CSR */
 #define RIO_EM_LTL_ADDR_CAP	0x014	/* Logical/Transport Layer Address Capture CSR */
 #define RIO_EM_LTL_DEVID_CAP	0x018	/* Logical/Transport Layer Device ID Capture CSR */