USB: serial: enabling support for Segway RMP in ftdi_sio

I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will
enable support for the Segway Robotic Mobility Platform (RMP200) in the
ftdi_sio kernel module.  Currently, users of the Segway RMP200 must use
a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a
udev rule to get the ftdi_sio module to handle the usb interface and
mount it on /dev/ttyXXX.  This is not a good solution because some users
will have multiple USB to Serial converters which will use the ftdi_sio
module.
Signed-off-by: John Rogers <jgrogers@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/ftdi_sio.c

@@ -746,6 +746,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio_ids.h

@@ -1032,3 +1032,8 @@
 #define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
 #define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
 
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID	0xe729