[media] dib7090: add the reference board TFE7790E

The intend of this patch is to add the support for the DiBcom reference
board TFE7790E.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -2428,6 +2428,71 @@ static const struct dib0090_config tfe7090e_dib0090_config = {
 	.is_dib7090e = 1,
 };
 
+static struct dib7000p_config tfe7790e_dib7000p_config = {
+	.output_mpeg2_in_188_bytes  = 1,
+	.hostbus_diversity			= 1,
+	.tuner_is_baseband			= 1,
+	.update_lna					= dib7090e_update_lna,
+
+	.agc_config_count			= 2,
+	.agc						= dib7090_agc_config,
+
+	.bw							= &dib7090_clock_config_12_mhz,
+
+	.gpio_dir					= DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val					= DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos				= DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div				= 0,
+
+	.agc_control				= dib7090_agc_restart,
+
+	.spur_protect				= 0,
+	.disable_sample_and_hold	= 0,
+	.enable_current_mirror		= 0,
+	.diversity_delay			= 0,
+
+	.output_mode				= OUTMODE_MPEG2_PAR_GATED_CLK,
+	.enMpegOutput				= 1,
+};
+
+static const struct dib0090_config tfe7790e_dib0090_config = {
+	.io.clock_khz = 12000,
+	.io.pll_bypass = 0,
+	.io.pll_range = 0,
+	.io.pll_prediv = 3,
+	.io.pll_loopdiv = 6,
+	.io.adc_clock_ratio = 0,
+	.io.pll_int_loop_filt = 0,
+	.reset = dib7090_tuner_sleep,
+	.sleep = dib7090_tuner_sleep,
+
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = 0,
+
+	.get_adc_power = dib7090_get_adc_power,
+
+	.clkouttobamse = 1,
+	.analog_output = 0,
+
+	.wbd_vhf_offset = 0,
+	.wbd_cband_offset = 0,
+	.use_pwm_agc = 1,
+	.clkoutdrive = 0,
+
+	.fref_clock_ratio = 0,
+
+	.wbd = dib7090e_wbd_table,
+
+	.ls_cfg_pad_drv = 0,
+	.data_tx_drv = 0,
+	.low_if = NULL,
+	.in_soc = 1,
+	.force_cband_input = 1,
+	.is_dib7090e = 1,
+	.force_crystal_mode = 1,
+};
+
 static const struct dib0090_config tfe7090pvr_dib0090_config[2] = {
 	{
 		.io.clock_khz = 12000,
@@ -2646,6 +2711,54 @@ static int tfe7090e_frontend_attach(struct dvb_usb_adapter *adap)
 	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
 }
 
+static int tfe7790e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* The TFE7790E requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(20);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(20);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap,
+				1, 0x10, &tfe7790e_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+				__func__);
+		return -ENODEV;
+	}
+	adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+			0x80, &tfe7790e_dib7000p_config);
+
+	return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe7790e_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c =
+		dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+	if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+				&tfe7790e_dib0090_config) == NULL)
+		return -ENODEV;
+
+	dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+	st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+	adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+	return 0;
+}
+
 static int tfe7090e_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_adapter_state *st = adap->priv;
@@ -3120,6 +3233,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
 	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7790E) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -4215,6 +4329,46 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.num_frontends = 1,
+				.fe = {{
+					.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+						DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+					.pid_filter_count = 32,
+					.pid_filter = stk70x0p_pid_filter,
+					.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+					.frontend_attach  = tfe7790e_frontend_attach,
+					.tuner_attach     = tfe7790e_tuner_attach,
+
+					DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+				} },
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom TFE7790E reference design",
+				{ &dib0700_usb_id_table[79], NULL },
+				{ NULL },
+			},
+		},
+
 		.rc.core = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,

drivers/media/dvb/dvb-usb/dvb-usb-ids.h

@@ -114,6 +114,7 @@
 #define USB_PID_DIBCOM_NIM7090				0x1bb2
 #define USB_PID_DIBCOM_TFE7090PVR			0x1bb4
 #define USB_PID_DIBCOM_TFE7090E				0x1bb7
+#define USB_PID_DIBCOM_TFE7790E				0x1e6e
 #define USB_PID_DIBCOM_NIM9090M				0x2383
 #define USB_PID_DIBCOM_NIM9090MD			0x2384
 #define USB_PID_DPOSH_M9206_COLD			0x9206