mtd: devices: elm: Add support for ELM error correction

The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme
error correction.
For now only 4 & 8 bit support is added
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Documentation/devicetree/bindings/mtd/elm.txt

+Error location module
+
+Required properties:
+- compatible: Must be "ti,am33xx-elm"
+- reg: physical base address and size of the registers map.
+- interrupts: Interrupt number for the elm.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the elm
+
+Example:
+elm: elm@0 {
+	compatible	= "ti,am33xx-elm";
+	reg = <0x48080000 0x2000>;
+	interrupts = <4>;
+};

drivers/mtd/devices/Makefile

@@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
+obj-$(CONFIG_MTD_NAND_OMAP_BCH)	+= elm.o
 obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
 obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
 
+
 CFLAGS_docg3.o			+= -I$(src)

include/linux/platform_data/elm.h

+/*
+ * BCH Error Location Module
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ELM_H
+#define __ELM_H
+
+enum bch_ecc {
+	BCH4_ECC = 0,
+	BCH8_ECC,
+};
+
+/* ELM support 8 error syndrome process */
+#define ERROR_VECTOR_MAX		8
+
+#define BCH8_ECC_OOB_BYTES		13
+#define BCH4_ECC_OOB_BYTES		7
+/* RBL requires 14 byte even though BCH8 uses only 13 byte */
+#define BCH8_SIZE			(BCH8_ECC_OOB_BYTES + 1)
+#define BCH4_SIZE			(BCH4_ECC_OOB_BYTES)
+
+/**
+ * struct elm_errorvec - error vector for elm
+ * @error_reported:		set true for vectors error is reported
+ * @error_uncorrectable:	number of uncorrectable errors
+ * @error_count:		number of correctable errors in the sector
+ * @error_loc:			buffer for error location
+ *
+ */
+struct elm_errorvec {
+	bool error_reported;
+	bool error_uncorrectable;
+	int error_count;
+	int error_loc[ERROR_VECTOR_MAX];
+};
+
+void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
+		struct elm_errorvec *err_vec);
+void elm_config(struct device *dev, enum bch_ecc bch_type);
+#endif /* __ELM_H */