drm/panel: nv3052c: Add Fascontek FS035VG158 LCD display

This display is extremely similar to the LTK035C5444T, but still has
some minor variations in panel initialization.
Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-4-d75adc75571f@jookia.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-4-d75adc75571f@jookia.org

drivers/gpu/drm/panel/panel-newvision-nv3052c.c

@@ -238,6 +238,201 @@ static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
 	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
 };
 
+static const struct nv3052c_reg fs035vg158_panel_regs[] = {
+	// EXTC Command set enable, select page 1
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
+	// Mostly unknown registers
+	{ 0xe3, 0x00 },
+	{ 0x40, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x03 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x07 },
+	{ 0x0a, 0x01 },
+	{ 0x0b, 0x32 },
+	{ 0x0c, 0x32 },
+	{ 0x0d, 0x0b },
+	{ 0x0e, 0x00 },
+	{ 0x23, 0x20 }, // RGB interface control: DE MODE PCLK-N
+	{ 0x24, 0x0c },
+	{ 0x25, 0x06 },
+	{ 0x26, 0x14 },
+	{ 0x27, 0x14 },
+	{ 0x38, 0x9c }, //VCOM_ADJ1, different to ltk035c5444t
+	{ 0x39, 0xa7 }, //VCOM_ADJ2, different to ltk035c5444t
+	{ 0x3a, 0x50 }, //VCOM_ADJ3, different to ltk035c5444t
+	{ 0x28, 0x40 },
+	{ 0x29, 0x01 },
+	{ 0x2a, 0xdf },
+	{ 0x49, 0x3c },
+	{ 0x91, 0x57 }, //EXTPW_CTRL2, different to ltk035c5444t
+	{ 0x92, 0x57 }, //EXTPW_CTRL3, different to ltk035c5444t
+	{ 0xa0, 0x55 },
+	{ 0xa1, 0x50 },
+	{ 0xa4, 0x9c },
+	{ 0xa7, 0x02 },
+	{ 0xa8, 0x01 },
+	{ 0xa9, 0x01 },
+	{ 0xaa, 0xfc },
+	{ 0xab, 0x28 },
+	{ 0xac, 0x06 },
+	{ 0xad, 0x06 },
+	{ 0xae, 0x06 },
+	{ 0xaf, 0x03 },
+	{ 0xb0, 0x08 },
+	{ 0xb1, 0x26 },
+	{ 0xb2, 0x28 },
+	{ 0xb3, 0x28 },
+	{ 0xb4, 0x03 }, // Unknown, different to ltk035c5444
+	{ 0xb5, 0x08 },
+	{ 0xb6, 0x26 },
+	{ 0xb7, 0x08 },
+	{ 0xb8, 0x26 },
+	{ 0xf0, 0x00 },
+	{ 0xf6, 0xc0 },
+	// EXTC Command set enable, select page 0
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Set gray scale voltage to adjust gamma
+	{ 0xb0, 0x0b }, // PGAMVR0
+	{ 0xb1, 0x16 }, // PGAMVR1
+	{ 0xb2, 0x17 }, // PGAMVR2
+	{ 0xb3, 0x2c }, // PGAMVR3
+	{ 0xb4, 0x32 }, // PGAMVR4
+	{ 0xb5, 0x3b }, // PGAMVR5
+	{ 0xb6, 0x29 }, // PGAMPR0
+	{ 0xb7, 0x40 }, // PGAMPR1
+	{ 0xb8, 0x0d }, // PGAMPK0
+	{ 0xb9, 0x05 }, // PGAMPK1
+	{ 0xba, 0x12 }, // PGAMPK2
+	{ 0xbb, 0x10 }, // PGAMPK3
+	{ 0xbc, 0x12 }, // PGAMPK4
+	{ 0xbd, 0x15 }, // PGAMPK5
+	{ 0xbe, 0x19 }, // PGAMPK6
+	{ 0xbf, 0x0e }, // PGAMPK7
+	{ 0xc0, 0x16 }, // PGAMPK8
+	{ 0xc1, 0x0a }, // PGAMPK9
+	// Set gray scale voltage to adjust gamma
+	{ 0xd0, 0x0c }, // NGAMVR0
+	{ 0xd1, 0x17 }, // NGAMVR0
+	{ 0xd2, 0x14 }, // NGAMVR1
+	{ 0xd3, 0x2e }, // NGAMVR2
+	{ 0xd4, 0x32 }, // NGAMVR3
+	{ 0xd5, 0x3c }, // NGAMVR4
+	{ 0xd6, 0x22 }, // NGAMPR0
+	{ 0xd7, 0x3d }, // NGAMPR1
+	{ 0xd8, 0x0d }, // NGAMPK0
+	{ 0xd9, 0x07 }, // NGAMPK1
+	{ 0xda, 0x13 }, // NGAMPK2
+	{ 0xdb, 0x13 }, // NGAMPK3
+	{ 0xdc, 0x11 }, // NGAMPK4
+	{ 0xdd, 0x15 }, // NGAMPK5
+	{ 0xde, 0x19 }, // NGAMPK6
+	{ 0xdf, 0x10 }, // NGAMPK7
+	{ 0xe0, 0x17 }, // NGAMPK8
+	{ 0xe1, 0x0a }, // NGAMPK9
+	// EXTC Command set enable, select page 3
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 },
+	// Set various timing settings
+	{ 0x00, 0x2a }, // GIP_VST_1
+	{ 0x01, 0x2a }, // GIP_VST_2
+	{ 0x02, 0x2a }, // GIP_VST_3
+	{ 0x03, 0x2a }, // GIP_VST_4
+	{ 0x04, 0x61 }, // GIP_VST_5
+	{ 0x05, 0x80 }, // GIP_VST_6
+	{ 0x06, 0xc7 }, // GIP_VST_7
+	{ 0x07, 0x01 }, // GIP_VST_8
+	{ 0x08, 0x03 }, // GIP_VST_9
+	{ 0x09, 0x04 }, // GIP_VST_10
+	{ 0x70, 0x22 }, // GIP_ECLK1
+	{ 0x71, 0x80 }, // GIP_ECLK2
+	{ 0x30, 0x2a }, // GIP_CLK_1
+	{ 0x31, 0x2a }, // GIP_CLK_2
+	{ 0x32, 0x2a }, // GIP_CLK_3
+	{ 0x33, 0x2a }, // GIP_CLK_4
+	{ 0x34, 0x61 }, // GIP_CLK_5
+	{ 0x35, 0xc5 }, // GIP_CLK_6
+	{ 0x36, 0x80 }, // GIP_CLK_7
+	{ 0x37, 0x23 }, // GIP_CLK_8
+	{ 0x40, 0x03 }, // GIP_CLKA_1
+	{ 0x41, 0x04 }, // GIP_CLKA_2
+	{ 0x42, 0x05 }, // GIP_CLKA_3
+	{ 0x43, 0x06 }, // GIP_CLKA_4
+	{ 0x44, 0x11 }, // GIP_CLKA_5
+	{ 0x45, 0xe8 }, // GIP_CLKA_6
+	{ 0x46, 0xe9 }, // GIP_CLKA_7
+	{ 0x47, 0x11 }, // GIP_CLKA_8
+	{ 0x48, 0xea }, // GIP_CLKA_9
+	{ 0x49, 0xeb }, // GIP_CLKA_10
+	{ 0x50, 0x07 }, // GIP_CLKB_1
+	{ 0x51, 0x08 }, // GIP_CLKB_2
+	{ 0x52, 0x09 }, // GIP_CLKB_3
+	{ 0x53, 0x0a }, // GIP_CLKB_4
+	{ 0x54, 0x11 }, // GIP_CLKB_5
+	{ 0x55, 0xec }, // GIP_CLKB_6
+	{ 0x56, 0xed }, // GIP_CLKB_7
+	{ 0x57, 0x11 }, // GIP_CLKB_8
+	{ 0x58, 0xef }, // GIP_CLKB_9
+	{ 0x59, 0xf0 }, // GIP_CLKB_10
+	// Map internal GOA signals to GOA output pad
+	{ 0xb1, 0x01 }, // PANELD2U2
+	{ 0xb4, 0x15 }, // PANELD2U5
+	{ 0xb5, 0x16 }, // PANELD2U6
+	{ 0xb6, 0x09 }, // PANELD2U7
+	{ 0xb7, 0x0f }, // PANELD2U8
+	{ 0xb8, 0x0d }, // PANELD2U9
+	{ 0xb9, 0x0b }, // PANELD2U10
+	{ 0xba, 0x00 }, // PANELD2U11
+	{ 0xc7, 0x02 }, // PANELD2U24
+	{ 0xca, 0x17 }, // PANELD2U27
+	{ 0xcb, 0x18 }, // PANELD2U28
+	{ 0xcc, 0x0a }, // PANELD2U29
+	{ 0xcd, 0x10 }, // PANELD2U30
+	{ 0xce, 0x0e }, // PANELD2U31
+	{ 0xcf, 0x0c }, // PANELD2U32
+	{ 0xd0, 0x00 }, // PANELD2U33
+	// Map internal GOA signals to GOA output pad
+	{ 0x81, 0x00 }, // PANELU2D2
+	{ 0x84, 0x15 }, // PANELU2D5
+	{ 0x85, 0x16 }, // PANELU2D6
+	{ 0x86, 0x10 }, // PANELU2D7
+	{ 0x87, 0x0a }, // PANELU2D8
+	{ 0x88, 0x0c }, // PANELU2D9
+	{ 0x89, 0x0e }, // PANELU2D10
+	{ 0x8a, 0x02 }, // PANELU2D11
+	{ 0x97, 0x00 }, // PANELU2D24
+	{ 0x9a, 0x17 }, // PANELU2D27
+	{ 0x9b, 0x18 }, // PANELU2D28
+	{ 0x9c, 0x0f }, // PANELU2D29
+	{ 0x9d, 0x09 }, // PANELU2D30
+	{ 0x9e, 0x0b }, // PANELU2D31
+	{ 0x9f, 0x0d }, // PANELU2D32
+	{ 0xa0, 0x01 }, // PANELU2D33
+	// EXTC Command set enable, select page 2
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Unknown registers
+	{ 0x01, 0x01 },
+	{ 0x02, 0xda },
+	{ 0x03, 0xba },
+	{ 0x04, 0xa8 },
+	{ 0x05, 0x9a },
+	{ 0x06, 0x70 },
+	{ 0x07, 0xff },
+	{ 0x08, 0x91 },
+	{ 0x09, 0x90 },
+	{ 0x0a, 0xff },
+	{ 0x0b, 0x8f },
+	{ 0x0c, 0x60 },
+	{ 0x0d, 0x58 },
+	{ 0x0e, 0x48 },
+	{ 0x0f, 0x38 },
+	{ 0x10, 0x2b },
+	// EXTC Command set enable, select page 0
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 },
+	// Display Access Control
+	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
+};
+
 static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
 {
 	return container_of(panel, struct nv3052c, panel);
@@ -460,6 +655,21 @@ static const struct drm_display_mode ltk035c5444t_modes[] = {
 	},
 };
 
+static const struct drm_display_mode fs035vg158_modes[] = {
+	{ /* 60 Hz */
+		.clock = 21000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 34,
+		.hsync_end = 640 + 34 + 4,
+		.htotal = 640 + 34 + 4 + 20,
+		.vdisplay = 480,
+		.vsync_start = 480 + 12,
+		.vsync_end = 480 + 12 + 4,
+		.vtotal = 480 + 12 + 4 + 6,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+};
+
 static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.display_modes = ltk035c5444t_modes,
 	.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
@@ -471,14 +681,27 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
 };
 
+static const struct nv3052c_panel_info fs035vg158_panel_info = {
+	.display_modes = fs035vg158_modes,
+	.num_modes = ARRAY_SIZE(fs035vg158_modes),
+	.width_mm = 70,
+	.height_mm = 53,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.panel_regs = fs035vg158_panel_regs,
+	.panel_regs_len = ARRAY_SIZE(fs035vg158_panel_regs),
+};
+
 static const struct spi_device_id nv3052c_ids[] = {
 	{ "ltk035c5444t", },
+	{ "fs035vg158", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(spi, nv3052c_ids);
 
 static const struct of_device_id nv3052c_of_match[] = {
 	{ .compatible = "leadtek,ltk035c5444t", .data = &ltk035c5444t_panel_info },
+	{ .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, nv3052c_of_match);