Commit c21bd0a8 authored by Vinod Koul's avatar Vinod Koul

Merge branch 'topic/mtek' into for-linus

parents ab2528c1 e10734e5
MediaTek High-Speed DMA Controller
==================================
This device follows the generic DMA bindings defined in dma/dma.txt.
Required properties:
- compatible: Must be one of
"mediatek,mt7622-hsdma": for MT7622 SoC
"mediatek,mt7623-hsdma": for MT7623 SoC
- reg: Should contain the register's base address and length.
- interrupts: Should contain a reference to the interrupt used by this
device.
- clocks: Should be the clock specifiers corresponding to the entry in
clock-names property.
- clock-names: Should contain "hsdma" entries.
- power-domains: Phandle to the power domain that the device is part of
- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
in dmas property of a client device represents the channel
number.
Example:
hsdma: dma-controller@1b007000 {
compatible = "mediatek,mt7623-hsdma";
reg = <0 0x1b007000 0 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
clocks = <&ethsys CLK_ETHSYS_HSDMA>;
clock-names = "hsdma";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
#dma-cells = <1>;
};
DMA clients must use the format described in dma/dma.txt file.
......@@ -8785,6 +8785,15 @@ M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
F: drivers/media/rc/mtk-cir.c
MEDIATEK DMA DRIVER
M: Sean Wang <sean.wang@mediatek.com>
L: dmaengine@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/dma/mtk-*
F: drivers/dma/mediatek/
MEDIATEK PMIC LED DRIVER
M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
......
......@@ -643,6 +643,8 @@ config ZX_DMA
# driver files
source "drivers/dma/bestcomm/Kconfig"
source "drivers/dma/mediatek/Kconfig"
source "drivers/dma/qcom/Kconfig"
source "drivers/dma/dw/Kconfig"
......
......@@ -76,5 +76,6 @@ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
obj-$(CONFIG_ZX_DMA) += zx_dma.o
obj-$(CONFIG_ST_FDMA) += st_fdma.o
obj-y += mediatek/
obj-y += qcom/
obj-y += xilinx/
config MTK_HSDMA
tristate "MediaTek High-Speed DMA controller support"
depends on ARCH_MEDIATEK || COMPILE_TEST
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
---help---
Enable support for High-Speed DMA controller on MediaTek
SoCs.
This controller provides the channels which is dedicated to
memory-to-memory transfer to offload from CPU through ring-
based descriptor management.
obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment