dpll: spec: add support for pin-dpll signal phase offset/adjust

Add attributes for providing the user with:
- measurement of signals phase offset between pin and dpll
- ability to adjust the phase of pin signal
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/netlink/specs/dpll.yaml

@@ -164,6 +164,18 @@ definitions:
       -
         name: state-can-change
         doc: pin state can be changed
+  -
+    type: const
+    name: phase-offset-divider
+    value: 1000
+    doc: |
+      phase offset divider allows userspace to calculate a value of
+      measured signal phase difference between a pin and dpll device
+      as a fractional value with three digit decimal precision.
+      Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an
+      integer part of a measured phase offset value.
+      Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
+      fractional part of a measured phase offset value.
 
 attribute-sets:
   -
@@ -272,6 +284,18 @@ attribute-sets:
         type: nest
         multi-attr: true
         nested-attributes: pin-parent-pin
+      -
+        name: phase-adjust-min
+        type: s32
+      -
+        name: phase-adjust-max
+        type: s32
+      -
+        name: phase-adjust
+        type: s32
+      -
+        name: phase-offset
+        type: s64
   -
     name: pin-parent-device
     subset-of: pin
@@ -284,6 +308,8 @@ attribute-sets:
         name: prio
       -
         name: state
+      -
+        name: phase-offset
   -
     name: pin-parent-pin
     subset-of: pin
@@ -431,6 +457,9 @@ operations:
             - capabilities
             - parent-device
             - parent-pin
+            - phase-adjust-min
+            - phase-adjust-max
+            - phase-adjust
 
       dump:
         pre: dpll-lock-dumpit
@@ -458,6 +487,7 @@ operations:
             - state
             - parent-device
             - parent-pin
+            - phase-adjust
     -
       name: pin-create-ntf
       doc: Notification about pin appearing

drivers/dpll/dpll_nl.c

@@ -11,11 +11,12 @@
 #include <uapi/linux/dpll.h>
 
 /* Common nested types */
-const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_STATE + 1] = {
+const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1] = {
 	[DPLL_A_PIN_PARENT_ID] = { .type = NLA_U32, },
 	[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
 	[DPLL_A_PIN_PRIO] = { .type = NLA_U32, },
 	[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
+	[DPLL_A_PIN_PHASE_OFFSET] = { .type = NLA_S64, },
 };
 
 const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1] = {
@@ -61,7 +62,7 @@ static const struct nla_policy dpll_pin_get_dump_nl_policy[DPLL_A_PIN_ID + 1] =
 };
 
 /* DPLL_CMD_PIN_SET - do */
-static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_PIN + 1] = {
+static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PHASE_ADJUST + 1] = {
 	[DPLL_A_PIN_ID] = { .type = NLA_U32, },
 	[DPLL_A_PIN_FREQUENCY] = { .type = NLA_U64, },
 	[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
@@ -69,6 +70,7 @@ static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_PIN + 1]
 	[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
 	[DPLL_A_PIN_PARENT_DEVICE] = NLA_POLICY_NESTED(dpll_pin_parent_device_nl_policy),
 	[DPLL_A_PIN_PARENT_PIN] = NLA_POLICY_NESTED(dpll_pin_parent_pin_nl_policy),
+	[DPLL_A_PIN_PHASE_ADJUST] = { .type = NLA_S32, },
 };
 
 /* Ops table for dpll */
@@ -140,7 +142,7 @@ static const struct genl_split_ops dpll_nl_ops[] = {
 		.doit		= dpll_nl_pin_set_doit,
 		.post_doit	= dpll_pin_post_doit,
 		.policy		= dpll_pin_set_nl_policy,
-		.maxattr	= DPLL_A_PIN_PARENT_PIN,
+		.maxattr	= DPLL_A_PIN_PHASE_ADJUST,
 		.flags		= GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
 	},
 };

drivers/dpll/dpll_nl.h

@@ -12,7 +12,7 @@
 #include <uapi/linux/dpll.h>
 
 /* Common nested types */
-extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_STATE + 1];
+extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1];
 extern const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1];
 
 int dpll_lock_doit(const struct genl_split_ops *ops, struct sk_buff *skb,

include/uapi/linux/dpll.h

@@ -138,6 +138,8 @@ enum dpll_pin_capabilities {
 	DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE = 4,
 };
 
+#define DPLL_PHASE_OFFSET_DIVIDER	1000
+
 enum dpll_a {
 	DPLL_A_ID = 1,
 	DPLL_A_MODULE_NAME,
@@ -173,6 +175,10 @@ enum dpll_a_pin {
 	DPLL_A_PIN_CAPABILITIES,
 	DPLL_A_PIN_PARENT_DEVICE,
 	DPLL_A_PIN_PARENT_PIN,
+	DPLL_A_PIN_PHASE_ADJUST_MIN,
+	DPLL_A_PIN_PHASE_ADJUST_MAX,
+	DPLL_A_PIN_PHASE_ADJUST,
+	DPLL_A_PIN_PHASE_OFFSET,
 
 	__DPLL_A_PIN_MAX,
 	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)