Merge branch 'regulator-5.4' into regulator-next

Documentation/devicetree/bindings/regulator/act8865-regulator.txt

@@ -34,6 +34,9 @@ Optional input supply properties:
   - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
 
 Any standard regulator properties can be used to configure the single regulator.
+regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
+for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
+file.
 
 The valid names for regulators are:
 	- for act8846:
@@ -47,6 +50,8 @@ The valid names for regulators are:
 Example:
 --------
 
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
 		i2c1: i2c@f0018000 {
 			pmic: act8865@5b {
 				compatible = "active-semi,act8865";
@@ -65,9 +70,19 @@ Example:
 						regulator-name = "VCC_1V2";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <1300000>;
-						regulator-suspend-mem-microvolt = <1150000>;
-						regulator-suspend-standby-microvolt = <1150000>;
 						regulator-always-on;
+
+						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
+						regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+						regulator-state-mem {
+							regulator-on-in-suspend;
+							regulator-suspend-min-microvolt = <1150000>;
+							regulator-suspend-max-microvolt = <1150000>;
+							regulator-changeable-in-suspend;
+							regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+						};
 					};
 
 					vcc_3v3_reg: DCDC_REG3 {
@@ -82,6 +97,14 @@ Example:
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
 						regulator-always-on;
+
+						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
+						regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+						regulator-state-mem {
+							regulator-off-in-suspend;
+						};
 					};
 
 					vddfuse_reg: LDO_REG2 {

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -19,9 +19,19 @@ description:
 allOf:
   - $ref: "regulator.yaml#"
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: regulator-fixed-clock
+  required:
+    - clocks
+
 properties:
   compatible:
-    const: regulator-fixed
+    enum:
+      - const: regulator-fixed
+      - const: regulator-fixed-clock
 
   regulator-name: true
 
@@ -29,6 +39,13 @@ properties:
     description: gpio to use for enable control
     maxItems: 1
 
+  clocks:
+    description:
+      clock to use for enable control. This binding is only available if
+      the compatible is chosen to regulator-fixed-clock. The clock binding
+      is mandatory if compatible is chosen to regulator-fixed-clock.
+    maxItems: 1
+
   startup-delay-us:
     description: startup time in microseconds
     $ref: /schemas/types.yaml#/definitions/uint32

Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt

@@ -22,9 +22,12 @@ RPMh resource.
 
 The names used for regulator nodes must match those supported by a given PMIC.
 Supported regulator node names:
+	PM8005:		smps1 - smps4
+	PM8009:		smps1 - smps2, ldo1 - ldo7
+	PM8150:		smps1 - smps10, ldo1 - ldo18
+	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
 	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
 	PMI8998:	bob
-	PM8005:		smps1 - smps4
 
 ========================
 First Level Nodes - PMIC
@@ -33,9 +36,13 @@ First Level Nodes - PMIC
 - compatible
 	Usage:      required
 	Value type: <string>
-	Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
-		    "qcom,pmi8998-rpmh-regulators" or
-		    "qcom,pm8005-rpmh-regulators".
+	Definition: Must be one of below:
+		    "qcom,pm8005-rpmh-regulators"
+		    "qcom,pm8009-rpmh-regulators"
+		    "qcom,pm8150-rpmh-regulators"
+		    "qcom,pm8150l-rpmh-regulators"
+		    "qcom,pm8998-rpmh-regulators"
+		    "qcom,pmi8998-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required

Documentation/devicetree/bindings/regulator/sy8824x.txt

+SY8824C/SY8824E/SY20276 Voltage regulator
+
+Required properties:
+- compatible: Must be one of the following.
+	"silergy,sy8824c"
+	"silergy,sy8824e"
+	"silergy,sy20276"
+	"silergy,sy20278"
+- reg: I2C slave address
+
+Any property defined as part of the core regulator binding, defined in
+./regulator.txt, can also be used.
+
+Example:
+
+	vcore: regulator@00 {
+		compatible = "silergy,sy8824c";
+		reg = <0x66>;
+		regulator-name = "vcore";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};

Documentation/devicetree/bindings/regulator/twl-regulator.txt

@@ -71,3 +71,10 @@ Example:
 		regulator-min-microvolt  = <1000000>;
 		regulator-max-microvolt  = <3000000>;
 	};
+
+For twl6030 regulators/LDOs:
+
+ - ti,retain-on-reset: Does not turn off the supplies during warm
+                       reset. Could be needed for VMMC, as TWL6030
+                       reset sequence for this signal does not comply
+                       with the SD specification.

Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

@@ -13,6 +13,7 @@ this layer. These clocks and resets should be described in each property.
 Required properties:
 - compatible: Should be
     "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
+    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
     "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
     "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
     "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
@@ -20,12 +21,12 @@ Required properties:
 - clocks: A list of phandles to the clock gate for USB3 glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 - resets: A list of phandles to the reset control for USB3 glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 
 See Documentation/devicetree/bindings/regulator/regulator.txt

MAINTAINERS

@@ -17263,6 +17263,7 @@ F:	Documentation/power/regulator/
 F:	drivers/regulator/
 F:	include/dt-bindings/regulator/
 F:	include/linux/regulator/
+K:	regulator_get_optional
 
 VRF
 M:	David Ahern <dsa@cumulusnetworks.com>

drivers/regulator/Kconfig

@@ -83,6 +83,7 @@ config REGULATOR_88PM8607
 config REGULATOR_ACT8865
 	tristate "Active-semi act8865 voltage regulator"
 	depends on I2C
+	depends on POWER_SUPPLY
 	select REGMAP_I2C
 	help
 	  This driver controls a active-semi act8865 voltage output
@@ -618,6 +619,15 @@ config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6358
+	tristate "MediaTek MT6358 PMIC"
+	depends on MFD_MT6397 && BROKEN
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6358 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6380
 	tristate "MediaTek MT6380 PMIC"
 	depends on MTK_PMIC_WRAP
@@ -906,6 +916,13 @@ config REGULATOR_SY8106A
 	help
 	  This driver supports SY8106A single output regulator.
 
+config REGULATOR_SY8824X
+	tristate "Silergy SY8824C/SY8824E regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports SY8824C single output regulator.
+
 config REGULATOR_TPS51632
 	tristate "TI TPS51632 Power Regulator"
 	depends on I2C

drivers/regulator/Makefile

@@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
@@ -111,6 +112,7 @@ obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
 obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
 obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
+obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
 obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o

drivers/regulator/core.c

@@ -381,12 +381,16 @@ static struct device_node *of_get_child_regulator(struct device_node *parent,
 		if (!regnode) {
 			regnode = of_get_child_regulator(child, prop_name);
 			if (regnode)
-				return regnode;
+				goto err_node_put;
 		} else {
-			return regnode;
+			goto err_node_put;
 		}
 	}
 	return NULL;
+
+err_node_put:
+	of_node_put(child);
+	return regnode;
 }
 
 /**
@@ -564,13 +568,15 @@ static ssize_t regulator_uV_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
-	ssize_t ret;
+	int uV;
 
 	regulator_lock(rdev);
-	ret = sprintf(buf, "%d\n", regulator_get_voltage_rdev(rdev));
+	uV = regulator_get_voltage_rdev(rdev);
 	regulator_unlock(rdev);
 
-	return ret;
+	if (uV < 0)
+		return uV;
+	return sprintf(buf, "%d\n", uV);
 }
 static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
 
@@ -5640,7 +5646,7 @@ static int __init regulator_init(void)
 /* init early to allow our consumers to complete system booting */
 core_initcall(regulator_init);
 
-static int __init regulator_late_cleanup(struct device *dev, void *data)
+static int regulator_late_cleanup(struct device *dev, void *data)
 {
 	struct regulator_dev *rdev = dev_to_rdev(dev);
 	const struct regulator_ops *ops = rdev->desc->ops;
@@ -5689,17 +5695,8 @@ static int __init regulator_late_cleanup(struct device *dev, void *data)
 	return 0;
 }
 
-static int __init regulator_init_complete(void)
+static void regulator_init_complete_work_function(struct work_struct *work)
 {
-	/*
-	 * Since DT doesn't provide an idiomatic mechanism for
-	 * enabling full constraints and since it's much more natural
-	 * with DT to provide them just assume that a DT enabled
-	 * system has full constraints.
-	 */
-	if (of_have_populated_dt())
-		has_full_constraints = true;
-
 	/*
 	 * Regulators may had failed to resolve their input supplies
 	 * when were registered, either because the input supply was
@@ -5717,6 +5714,35 @@ static int __init regulator_init_complete(void)
 	 */
 	class_for_each_device(&regulator_class, NULL, NULL,
 			      regulator_late_cleanup);
+}
+
+static DECLARE_DELAYED_WORK(regulator_init_complete_work,
+			    regulator_init_complete_work_function);
+
+static int __init regulator_init_complete(void)
+{
+	/*
+	 * Since DT doesn't provide an idiomatic mechanism for
+	 * enabling full constraints and since it's much more natural
+	 * with DT to provide them just assume that a DT enabled
+	 * system has full constraints.
+	 */
+	if (of_have_populated_dt())
+		has_full_constraints = true;
+
+	/*
+	 * We punt completion for an arbitrary amount of time since
+	 * systems like distros will load many drivers from userspace
+	 * so consumers might not always be ready yet, this is
+	 * particularly an issue with laptops where this might bounce
+	 * the display off then on.  Ideally we'd get a notification
+	 * from userspace when this happens but we don't so just wait
+	 * a bit and hope we waited long enough.  It'd be better if
+	 * we'd only do this on systems that need it, and a kernel
+	 * command line option might be useful.
+	 */
+	schedule_delayed_work(&regulator_init_complete_work,
+			      msecs_to_jiffies(30000));
 
 	return 0;
 }

drivers/regulator/da9062-regulator.c

@@ -1032,10 +1032,8 @@ static int da9062_regulator_probe(struct platform_device *pdev)
 
 	/* LDOs overcurrent event support */
 	irq = platform_get_irq_byname(pdev, "LDO_LIM");
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+	if (irq < 0)
 		return irq;
-	}
 	regulators->irq_ldo_lim = irq;
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq,

drivers/regulator/da9063-regulator.c

@@ -863,10 +863,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 
 	/* LDOs overcurrent event support */
 	irq = platform_get_irq_byname(pdev, "LDO_LIM");
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq,
 				NULL, da9063_ldo_lim_event,

drivers/regulator/da9211-regulator.c

@@ -285,7 +285,7 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 		pdata->reg_node[n] = da9211_matches[i].of_node;
 		pdata->gpiod_ren[n] = devm_gpiod_get_from_of_node(dev,
 				  da9211_matches[i].of_node,
-				  "enable",
+				  "enable-gpios",
 				  0,
 				  GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				  "da9211-enable");

drivers/regulator/fixed.c

@@ -23,14 +23,63 @@
 #include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/machine.h>
+#include <linux/clk.h>
+
 
 struct fixed_voltage_data {
 	struct regulator_desc desc;
 	struct regulator_dev *dev;
+
+	struct clk *enable_clock;
+	unsigned int clk_enable_counter;
 };
 
+struct fixed_dev_type {
+	bool has_enable_clock;
+};
+
+static const struct fixed_dev_type fixed_voltage_data = {
+	.has_enable_clock = false,
+};
+
+static const struct fixed_dev_type fixed_clkenable_data = {
+	.has_enable_clock = true,
+};
+
+static int reg_clock_enable(struct regulator_dev *rdev)
+{
+	struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
+	int ret = 0;
+
+	ret = clk_prepare_enable(priv->enable_clock);
+	if (ret)
+		return ret;
+
+	priv->clk_enable_counter++;
+
+	return ret;
+}
+
+static int reg_clock_disable(struct regulator_dev *rdev)
+{
+	struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
+
+	clk_disable_unprepare(priv->enable_clock);
+	priv->clk_enable_counter--;
+
+	return 0;
+}
+
+static int reg_clock_is_enabled(struct regulator_dev *rdev)
+{
+	struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
+
+	return priv->clk_enable_counter > 0;
+}
+
 
 /**
  * of_get_fixed_voltage_config - extract fixed_voltage_config structure info
@@ -84,10 +133,19 @@ of_get_fixed_voltage_config(struct device *dev,
 static struct regulator_ops fixed_voltage_ops = {
 };
 
+static struct regulator_ops fixed_voltage_clkenabled_ops = {
+	.enable = reg_clock_enable,
+	.disable = reg_clock_disable,
+	.is_enabled = reg_clock_is_enabled,
+};
+
 static int reg_fixed_voltage_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct fixed_voltage_config *config;
 	struct fixed_voltage_data *drvdata;
+	const struct fixed_dev_type *drvtype =
+		of_match_device(dev->driver->of_match_table, dev)->data;
 	struct regulator_config cfg = { };
 	enum gpiod_flags gflags;
 	int ret;
@@ -118,7 +176,18 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	}
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
-	drvdata->desc.ops = &fixed_voltage_ops;
+
+	if (drvtype->has_enable_clock) {
+		drvdata->desc.ops = &fixed_voltage_clkenabled_ops;
+
+		drvdata->enable_clock = devm_clk_get(dev, NULL);
+		if (IS_ERR(drvdata->enable_clock)) {
+			dev_err(dev, "Cant get enable-clock from devicetree\n");
+			return -ENOENT;
+		}
+	} else {
+		drvdata->desc.ops = &fixed_voltage_ops;
+	}
 
 	drvdata->desc.enable_time = config->startup_delay;
 
@@ -191,8 +260,16 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 
 #if defined(CONFIG_OF)
 static const struct of_device_id fixed_of_match[] = {
-	{ .compatible = "regulator-fixed", },
-	{},
+	{
+		.compatible = "regulator-fixed",
+		.data = &fixed_voltage_data,
+	},
+	{
+		.compatible = "regulator-fixed-clock",
+		.data = &fixed_clkenable_data,
+	},
+	{
+	},
 };
 MODULE_DEVICE_TABLE(of, fixed_of_match);
 #endif

drivers/regulator/helpers.c

@@ -860,3 +860,24 @@ int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
 	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
+
+/**
+ * regulator_bulk_set_supply_names - initialize the 'supply' fields in an array
+ *                                   of regulator_bulk_data structs
+ *
+ * @consumers: array of regulator_bulk_data entries to initialize
+ * @supply_names: array of supply name strings
+ * @num_supplies: number of supply names to initialize
+ *
+ * Note: the 'consumers' array must be the size of 'num_supplies'.
+ */
+void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				     const char *const *supply_names,
+				     unsigned int num_supplies)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_supplies; i++)
+		consumers[i].supply = supply_names[i];
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_set_supply_names);

drivers/regulator/lm363x-regulator.c

@@ -30,13 +30,13 @@
 
 /* LM3632 */
 #define LM3632_BOOST_VSEL_MAX		0x26
-#define LM3632_LDO_VSEL_MAX		0x29
+#define LM3632_LDO_VSEL_MAX		0x28
 #define LM3632_VBOOST_MIN		4500000
 #define LM3632_VLDO_MIN			4000000
 
 /* LM36274 */
 #define LM36274_BOOST_VSEL_MAX		0x3f
-#define LM36274_LDO_VSEL_MAX		0x34
+#define LM36274_LDO_VSEL_MAX		0x32
 #define LM36274_VOLTAGE_MIN		4000000
 
 /* Common */
@@ -226,7 +226,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
 		.of_match	= "vboost",
 		.id             = LM36274_BOOST,
 		.ops            = &lm363x_boost_voltage_table_ops,
-		.n_voltages     = LM36274_BOOST_VSEL_MAX,
+		.n_voltages     = LM36274_BOOST_VSEL_MAX + 1,
 		.min_uV         = LM36274_VOLTAGE_MIN,
 		.uV_step        = LM363X_STEP_50mV,
 		.type           = REGULATOR_VOLTAGE,
@@ -239,7 +239,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
 		.of_match	= "vpos",
 		.id             = LM36274_LDO_POS,
 		.ops            = &lm363x_regulator_voltage_table_ops,
-		.n_voltages     = LM36274_LDO_VSEL_MAX,
+		.n_voltages     = LM36274_LDO_VSEL_MAX + 1,
 		.min_uV         = LM36274_VOLTAGE_MIN,
 		.uV_step        = LM363X_STEP_50mV,
 		.type           = REGULATOR_VOLTAGE,
@@ -254,7 +254,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
 		.of_match	= "vneg",
 		.id             = LM36274_LDO_NEG,
 		.ops            = &lm363x_regulator_voltage_table_ops,
-		.n_voltages     = LM36274_LDO_VSEL_MAX,
+		.n_voltages     = LM36274_LDO_VSEL_MAX + 1,
 		.min_uV         = LM36274_VOLTAGE_MIN,
 		.uV_step        = LM363X_STEP_50mV,
 		.type           = REGULATOR_VOLTAGE,

drivers/regulator/lp87565-regulator.c

@@ -65,7 +65,6 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
 				       int ramp_delay)
 {
 	int id = rdev_get_id(rdev);
-	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
 	unsigned int reg;
 	int ret;
 
@@ -86,11 +85,11 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
 	else
 		reg = 0;
 
-	ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
+	ret = regmap_update_bits(rdev->regmap, regulators[id].ctrl2_reg,
 				 LP87565_BUCK_CTRL_2_SLEW_RATE,
 				 reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
 	if (ret) {
-		dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
+		dev_err(&rdev->dev, "SLEW RATE write failed: %d\n", ret);
 		return ret;
 	}
 

drivers/regulator/lp8788-ldo.c

@@ -464,7 +464,7 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
 {
 	struct lp8788 *lp = ldo->lp;
 	enum lp8788_ext_ldo_en_id enable_id;
-	u8 en_mask[] = {
+	static const u8 en_mask[] = {
 		[EN_ALDO1]   = LP8788_EN_SEL_ALDO1_M,
 		[EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
 		[EN_ALDO5]   = LP8788_EN_SEL_ALDO5_M,

drivers/regulator/max77686-regulator.c

@@ -257,7 +257,7 @@ static int max77686_of_parse_cb(struct device_node *np,
 	case MAX77686_BUCK9:
 	case MAX77686_LDO20 ... MAX77686_LDO22:
 		config->ena_gpiod = gpiod_get_from_of_node(np,
-				"maxim,ena",
+				"maxim,ena-gpios",
 				0,
 				GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				"max77686-regulator");

drivers/regulator/max8660.c

@@ -485,7 +485,6 @@ static int max8660_probe(struct i2c_client *client,
 		rdev = devm_regulator_register(&client->dev,
 						  &max8660_reg[id], &config);
 		if (IS_ERR(rdev)) {
-			ret = PTR_ERR(rdev);
 			dev_err(&client->dev, "failed to register %s\n",
 				max8660_reg[id].name);
 			return PTR_ERR(rdev);

drivers/regulator/qcom-rpmh-regulator.c

@@ -50,6 +50,20 @@ enum rpmh_regulator_type {
 #define PMIC4_BOB_MODE_AUTO			2
 #define PMIC4_BOB_MODE_PWM			3
 
+#define PMIC5_LDO_MODE_RETENTION		3
+#define PMIC5_LDO_MODE_LPM			4
+#define PMIC5_LDO_MODE_HPM			7
+
+#define PMIC5_SMPS_MODE_RETENTION		3
+#define PMIC5_SMPS_MODE_PFM			4
+#define PMIC5_SMPS_MODE_AUTO			6
+#define PMIC5_SMPS_MODE_PWM			7
+
+#define PMIC5_BOB_MODE_PASS			2
+#define PMIC5_BOB_MODE_PFM			4
+#define PMIC5_BOB_MODE_AUTO			6
+#define PMIC5_BOB_MODE_PWM			7
+
 /**
  * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
  * @regulator_type:		RPMh accelerator type used to manage this
@@ -488,6 +502,14 @@ static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = -EINVAL,
 };
 
+static const int pmic_mode_map_pmic5_ldo[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC5_LDO_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC5_LDO_MODE_LPM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_LDO_MODE_HPM,
+	[REGULATOR_MODE_FAST]    = -EINVAL,
+};
+
 static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -518,6 +540,14 @@ static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = PMIC4_SMPS_MODE_PWM,
 };
 
+static const int pmic_mode_map_pmic5_smps[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC5_SMPS_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC5_SMPS_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_SMPS_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC5_SMPS_MODE_PWM,
+};
+
 static unsigned int
 rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
 {
@@ -552,6 +582,14 @@ static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = PMIC4_BOB_MODE_PWM,
 };
 
+static const int pmic_mode_map_pmic5_bob[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = -EINVAL,
+	[REGULATOR_MODE_IDLE]    = PMIC5_BOB_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_BOB_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC5_BOB_MODE_PWM,
+};
+
 static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -637,6 +675,72 @@ static const struct rpmh_vreg_hw_data pmic4_lvs = {
 	/* LVS hardware does not support voltage or mode configuration. */
 };
 
+static const struct rpmh_vreg_hw_data pmic5_pldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
+	.n_voltages = 256,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
+	.n_voltages = 63,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_nldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
+	.n_voltages = 124,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	.n_voltages = 216,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
+	.n_voltages = 264,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
+	.n_voltages = 5,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_bob = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_bypass_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
+	.n_voltages = 136,
+	.pmic_mode_map = pmic_mode_map_pmic5_bob,
+	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
 #define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
 { \
 	.name		= _name, \
@@ -705,6 +809,75 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
 	{},
 };
 
+static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510,   "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510,   "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_hfsmps510, "vdd-s8"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo_lv,   "vdd-l1-l8"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps515, "vdd-s2"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
+	{},
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -743,6 +916,22 @@ static int rpmh_regulator_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id rpmh_regulator_match_table[] = {
+	{
+		.compatible = "qcom,pm8005-rpmh-regulators",
+		.data = pm8005_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8009-rpmh-regulators",
+		.data = pm8009_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8150-rpmh-regulators",
+		.data = pm8150_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8150l-rpmh-regulators",
+		.data = pm8150l_vreg_data,
+	},
 	{
 		.compatible = "qcom,pm8998-rpmh-regulators",
 		.data = pm8998_vreg_data,
@@ -751,10 +940,6 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmi8998-rpmh-regulators",
 		.data = pmi8998_vreg_data,
 	},
-	{
-		.compatible = "qcom,pm8005-rpmh-regulators",
-		.data = pm8005_vreg_data,
-	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);

drivers/regulator/rk808-regulator.c

@@ -606,7 +606,7 @@ static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
 	case 2:
 		return REGULATOR_MODE_NORMAL;
 	default:
-		return -EINVAL;
+		return REGULATOR_MODE_INVALID;
 	}
 }
 

drivers/regulator/s2mps11.c

@@ -1226,7 +1226,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 			goto out;
 		}
 
-		if (s2mps11->ext_control_gpiod[i]) {
+		if (config.ena_gpiod) {
 			ret = s2mps14_pmic_enable_ext_control(s2mps11,
 					regulator);
 			if (ret < 0) {

drivers/regulator/slg51000-regulator.c

@@ -447,19 +447,20 @@ static int slg51000_i2c_probe(struct i2c_client *client,
 {
 	struct device *dev = &client->dev;
 	struct slg51000 *chip;
-	struct gpio_desc *cs_gpiod = NULL;
+	struct gpio_desc *cs_gpiod;
 	int error, ret;
 
 	chip = devm_kzalloc(dev, sizeof(struct slg51000), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
-	cs_gpiod = devm_gpiod_get_from_of_node(dev, dev->of_node,
-					       "dlg,cs-gpios", 0,
-					       GPIOD_OUT_HIGH
-					       | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
-					       "slg51000-cs");
-	if (!IS_ERR(cs_gpiod)) {
+	cs_gpiod = devm_gpiod_get_optional(dev, "dlg,cs",
+					   GPIOD_OUT_HIGH |
+						GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(cs_gpiod))
+		return PTR_ERR(cs_gpiod);
+
+	if (cs_gpiod) {
 		dev_info(dev, "Found chip selector property\n");
 		chip->cs_gpiod = cs_gpiod;
 	}

drivers/regulator/stm32-booster.c

@@ -20,7 +20,6 @@
 #define STM32MP1_SYSCFG_EN_BOOSTER_MASK	BIT(8)
 
 static const struct regulator_ops stm32h7_booster_ops = {
-	.list_voltage	= regulator_list_voltage_linear,
 	.enable		= regulator_enable_regmap,
 	.disable	= regulator_disable_regmap,
 	.is_enabled	= regulator_is_enabled_regmap,
@@ -31,7 +30,6 @@ static const struct regulator_desc stm32h7_booster_desc = {
 	.supply_name = "vdda",
 	.n_voltages = 1,
 	.type = REGULATOR_VOLTAGE,
-	.min_uV = 3300000,
 	.fixed_uV = 3300000,
 	.ramp_delay = 66000, /* up to 50us to stabilize */
 	.ops = &stm32h7_booster_ops,
@@ -53,7 +51,6 @@ static int stm32mp1_booster_disable(struct regulator_dev *rdev)
 }
 
 static const struct regulator_ops stm32mp1_booster_ops = {
-	.list_voltage	= regulator_list_voltage_linear,
 	.enable		= stm32mp1_booster_enable,
 	.disable	= stm32mp1_booster_disable,
 	.is_enabled	= regulator_is_enabled_regmap,
@@ -64,7 +61,6 @@ static const struct regulator_desc stm32mp1_booster_desc = {
 	.supply_name = "vdda",
 	.n_voltages = 1,
 	.type = REGULATOR_VOLTAGE,
-	.min_uV = 3300000,
 	.fixed_uV = 3300000,
 	.ramp_delay = 66000,
 	.ops = &stm32mp1_booster_ops,

drivers/regulator/sy8824x.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// SY8824C/SY8824E regulator driver
+//
+// Copyright (C) 2019 Synaptics Incorporated
+//
+// Author: Jisheng Zhang <jszhang@kernel.org>
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define SY8824C_BUCK_EN		(1 << 7)
+#define SY8824C_MODE		(1 << 6)
+
+struct sy8824_config {
+	/* registers */
+	unsigned int vol_reg;
+	unsigned int mode_reg;
+	unsigned int enable_reg;
+	/* Voltage range and step(linear) */
+	unsigned int vsel_min;
+	unsigned int vsel_step;
+	unsigned int vsel_count;
+};
+
+struct sy8824_device_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_init_data *regulator;
+	const struct sy8824_config *cfg;
+};
+
+static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct sy8824_device_info *di = rdev_get_drvdata(rdev);
+	const struct sy8824_config *cfg = di->cfg;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(rdev->regmap, cfg->mode_reg,
+				   SY8824C_MODE, SY8824C_MODE);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(rdev->regmap, cfg->mode_reg,
+				   SY8824C_MODE, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int sy8824_get_mode(struct regulator_dev *rdev)
+{
+	struct sy8824_device_info *di = rdev_get_drvdata(rdev);
+	const struct sy8824_config *cfg = di->cfg;
+	u32 val;
+	int ret = 0;
+
+	ret = regmap_read(rdev->regmap, cfg->mode_reg, &val);
+	if (ret < 0)
+		return ret;
+	if (val & SY8824C_MODE)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops sy8824_regulator_ops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = sy8824_set_mode,
+	.get_mode = sy8824_get_mode,
+};
+
+static int sy8824_regulator_register(struct sy8824_device_info *di,
+			struct regulator_config *config)
+{
+	struct regulator_desc *rdesc = &di->desc;
+	const struct sy8824_config *cfg = di->cfg;
+	struct regulator_dev *rdev;
+
+	rdesc->name = "sy8824-reg";
+	rdesc->supply_name = "vin";
+	rdesc->ops = &sy8824_regulator_ops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->n_voltages = cfg->vsel_count;
+	rdesc->enable_reg = cfg->enable_reg;
+	rdesc->enable_mask = SY8824C_BUCK_EN;
+	rdesc->min_uV = cfg->vsel_min;
+	rdesc->uV_step = cfg->vsel_step;
+	rdesc->vsel_reg = cfg->vol_reg;
+	rdesc->vsel_mask = cfg->vsel_count - 1;
+	rdesc->owner = THIS_MODULE;
+
+	rdev = devm_regulator_register(di->dev, &di->desc, config);
+	return PTR_ERR_OR_ZERO(rdev);
+}
+
+static const struct regmap_config sy8824_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int sy8824_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct sy8824_device_info *di;
+	struct regulator_config config = { };
+	struct regmap *regmap;
+	int ret;
+
+	di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
+	if (!di->regulator) {
+		dev_err(dev, "Platform data not found!\n");
+		return -EINVAL;
+	}
+
+	di->dev = dev;
+	di->cfg = of_device_get_match_data(dev);
+
+	regmap = devm_regmap_init_i2c(client, &sy8824_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+	i2c_set_clientdata(client, di);
+
+	config.dev = di->dev;
+	config.init_data = di->regulator;
+	config.regmap = regmap;
+	config.driver_data = di;
+	config.of_node = np;
+
+	ret = sy8824_regulator_register(di, &config);
+	if (ret < 0)
+		dev_err(dev, "Failed to register regulator!\n");
+	return ret;
+}
+
+static const struct sy8824_config sy8824c_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x00,
+	.enable_reg = 0x00,
+	.vsel_min = 762500,
+	.vsel_step = 12500,
+	.vsel_count = 64,
+};
+
+static const struct sy8824_config sy8824e_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x00,
+	.enable_reg = 0x00,
+	.vsel_min = 700000,
+	.vsel_step = 12500,
+	.vsel_count = 64,
+};
+
+static const struct sy8824_config sy20276_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x01,
+	.enable_reg = 0x01,
+	.vsel_min = 600000,
+	.vsel_step = 10000,
+	.vsel_count = 128,
+};
+
+static const struct sy8824_config sy20278_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x01,
+	.enable_reg = 0x01,
+	.vsel_min = 762500,
+	.vsel_step = 12500,
+	.vsel_count = 64,
+};
+
+static const struct of_device_id sy8824_dt_ids[] = {
+	{
+		.compatible = "silergy,sy8824c",
+		.data = &sy8824c_cfg
+	},
+	{
+		.compatible = "silergy,sy8824e",
+		.data = &sy8824e_cfg
+	},
+	{
+		.compatible = "silergy,sy20276",
+		.data = &sy20276_cfg
+	},
+	{
+		.compatible = "silergy,sy20278",
+		.data = &sy20278_cfg
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sy8824_dt_ids);
+
+static const struct i2c_device_id sy8824_id[] = {
+	{ "sy8824", },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sy8824_id);
+
+static struct i2c_driver sy8824_regulator_driver = {
+	.driver = {
+		.name = "sy8824-regulator",
+		.of_match_table = of_match_ptr(sy8824_dt_ids),
+	},
+	.probe = sy8824_i2c_probe,
+	.id_table = sy8824_id,
+};
+module_i2c_driver(sy8824_regulator_driver);
+
+MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
+MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/tps65132-regulator.c

@@ -138,7 +138,7 @@ static int tps65132_of_parse_cb(struct device_node *np,
 
 	rpdata->en_gpiod = devm_fwnode_get_index_gpiod_from_child(tps->dev,
 					"enable", 0, &np->fwnode, 0, "enable");
-	if (IS_ERR(rpdata->en_gpiod)) {
+	if (IS_ERR_OR_NULL(rpdata->en_gpiod)) {
 		ret = PTR_ERR(rpdata->en_gpiod);
 
 		/* Ignore the error other than probe defer */
@@ -150,7 +150,7 @@ static int tps65132_of_parse_cb(struct device_node *np,
 	rpdata->act_dis_gpiod = devm_fwnode_get_index_gpiod_from_child(
 					tps->dev, "active-discharge", 0,
 					&np->fwnode, 0, "active-discharge");
-	if (IS_ERR(rpdata->act_dis_gpiod)) {
+	if (IS_ERR_OR_NULL(rpdata->act_dis_gpiod)) {
 		ret = PTR_ERR(rpdata->act_dis_gpiod);
 
 		/* Ignore the error other than probe defer */

drivers/regulator/twl6030-regulator.c

@@ -57,6 +57,9 @@ struct twlreg_info {
 #define VREG_BC_PROC		3
 #define VREG_BC_CLK_RST		4
 
+/* TWL6030 LDO register values for VREG_VOLTAGE */
+#define TWL6030_VREG_VOLTAGE_WR_S   BIT(7)
+
 /* TWL6030 LDO register values for CFG_STATE */
 #define TWL6030_CFG_STATE_OFF	0x00
 #define TWL6030_CFG_STATE_ON	0x01
@@ -68,9 +71,10 @@ struct twlreg_info {
 #define TWL6030_CFG_STATE_APP(v)	(((v) & TWL6030_CFG_STATE_APP_MASK) >>\
 						TWL6030_CFG_STATE_APP_SHIFT)
 
-/* Flags for SMPS Voltage reading */
+/* Flags for SMPS Voltage reading and LDO reading*/
 #define SMPS_OFFSET_EN		BIT(0)
 #define SMPS_EXTENDED_EN	BIT(1)
+#define TWL_6030_WARM_RESET	BIT(3)
 
 /* twl6032 SMPS EPROM values */
 #define TWL6030_SMPS_OFFSET		0xB0
@@ -250,6 +254,9 @@ twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 
+	if (info->flags & TWL_6030_WARM_RESET)
+		selector |= TWL6030_VREG_VOLTAGE_WR_S;
+
 	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
 			    selector);
 }
@@ -259,6 +266,9 @@ static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
 
+	if (info->flags & TWL_6030_WARM_RESET)
+		vsel &= ~TWL6030_VREG_VOLTAGE_WR_S;
+
 	return vsel;
 }
 
@@ -665,14 +675,14 @@ static int twlreg_probe(struct platform_device *pdev)
 	struct regulation_constraints	*c;
 	struct regulator_dev		*rdev;
 	struct regulator_config		config = { };
+	struct device_node		*np = pdev->dev.of_node;
 
 	template = of_device_get_match_data(&pdev->dev);
 	if (!template)
 		return -ENODEV;
 
 	id = template->desc.id;
-	initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
-						&template->desc);
+	initdata = of_get_regulator_init_data(&pdev->dev, np, &template->desc);
 	if (!initdata)
 		return -EINVAL;
 
@@ -710,10 +720,13 @@ static int twlreg_probe(struct platform_device *pdev)
 		break;
 	}
 
+	if (of_get_property(np, "ti,retain-on-reset", NULL))
+		info->flags |= TWL_6030_WARM_RESET;
+
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
 	config.driver_data = info;
-	config.of_node = pdev->dev.of_node;
+	config.of_node = np;
 
 	rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
 	if (IS_ERR(rdev)) {

drivers/regulator/uniphier-regulator.c

@@ -185,6 +185,10 @@ static const struct of_device_id uniphier_regulator_match[] = {
 		.compatible = "socionext,uniphier-pro4-usb3-regulator",
 		.data = &uniphier_pro4_usb3_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pro5-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
 	{
 		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
 		.data = &uniphier_pxs2_usb3_data,

include/dt-bindings/regulator/active-semi,8865-regulator.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree binding constants for the ACT8865 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8865_H
+#define _DT_BINDINGS_REGULATOR_ACT8865_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8865 regulators as follows:
+ * ACT8865_REGULATOR_MODE_FIXED:	It is specific to DCDC regulators and it
+ *					specifies the usage of fixed-frequency
+ *					PWM.
+ *
+ * ACT8865_REGULATOR_MODE_NORMAL:	It is specific to LDO regulators and it
+ *					specifies the usage of normal mode.
+ *
+ * ACT8865_REGULATOR_MODE_LOWPOWER:	For DCDC and LDO regulators; it specify
+ *					the usage of proprietary power-saving
+ *					mode.
+ */
+
+#define ACT8865_REGULATOR_MODE_FIXED		1
+#define ACT8865_REGULATOR_MODE_NORMAL		2
+#define ACT8865_REGULATOR_MODE_LOWPOWER	3
+
+#endif

include/linux/regulator/consumer.h

@@ -281,6 +281,12 @@ void devm_regulator_unregister_notifier(struct regulator *regulator,
 void *regulator_get_drvdata(struct regulator *regulator);
 void regulator_set_drvdata(struct regulator *regulator, void *data);
 
+/* misc helpers */
+
+void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				     const char *const *supply_names,
+				     unsigned int num_supplies);
+
 #else
 
 /*
@@ -580,6 +586,13 @@ static inline int regulator_list_voltage(struct regulator *regulator, unsigned s
 	return -EINVAL;
 }
 
+static inline void
+regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				const char *const *supply_names,
+				unsigned int num_supplies)
+{
+}
+
 #endif
 
 static inline int regulator_set_voltage_triplet(struct regulator *regulator,

include/linux/regulator/mt6358-regulator.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6358_H
+#define __LINUX_REGULATOR_MT6358_H
+
+enum {
+	MT6358_ID_VDRAM1 = 0,
+	MT6358_ID_VCORE,
+	MT6358_ID_VPA,
+	MT6358_ID_VPROC11,
+	MT6358_ID_VPROC12,
+	MT6358_ID_VGPU,
+	MT6358_ID_VS2,
+	MT6358_ID_VMODEM,
+	MT6358_ID_VS1,
+	MT6358_ID_VDRAM2 = 9,
+	MT6358_ID_VSIM1,
+	MT6358_ID_VIBR,
+	MT6358_ID_VRF12,
+	MT6358_ID_VIO18,
+	MT6358_ID_VUSB,
+	MT6358_ID_VCAMIO,
+	MT6358_ID_VCAMD,
+	MT6358_ID_VCN18,
+	MT6358_ID_VFE28,
+	MT6358_ID_VSRAM_PROC11,
+	MT6358_ID_VCN28,
+	MT6358_ID_VSRAM_OTHERS,
+	MT6358_ID_VSRAM_GPU,
+	MT6358_ID_VXO22,
+	MT6358_ID_VEFUSE,
+	MT6358_ID_VAUX18,
+	MT6358_ID_VMCH,
+	MT6358_ID_VBIF28,
+	MT6358_ID_VSRAM_PROC12,
+	MT6358_ID_VCAMA1,
+	MT6358_ID_VEMC,
+	MT6358_ID_VIO28,
+	MT6358_ID_VA12,
+	MT6358_ID_VRF18,
+	MT6358_ID_VCN33_BT,
+	MT6358_ID_VCN33_WIFI,
+	MT6358_ID_VCAMA2,
+	MT6358_ID_VMC,
+	MT6358_ID_VLDO28,
+	MT6358_ID_VAUD28,
+	MT6358_ID_VSIM2,
+	MT6358_ID_RG_MAX,
+};
+
+#define MT6358_MAX_REGULATOR	MT6358_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6358_H */