Merge branch 'clk-of-init-v2_for-3.13' of https://github.com/shesselba/linux-dove into next/cleanup

From Sebastian Hasselbarth:

This is a patch set based on an RFC [1][2] sent earlier to provide
a common arch/arm init for DT clock providers. Currently, the call to
of_clk_init(NULL) to initialize DT clock providers is spread among several
mach-dirs. Since most machs require DT clocks initialized before timers,
no initcall can be used.

By adding of_clk_init(NULL) to arch/arm time_init(), we can remove all
mach-specific .init_time hooks that basically called of_clk_init and
clocksource_of_init.

In contrast to the RFC version, of_clk_init(NULL) is now only called if
no custom .init_time callback is set. This allows some machs to still
call clock init themselves, as not all can be converted now. Therefore,
this patch sets drops conversion of mach-mvebu and mach-zynq. New machs
that were introduced with v3.12-rc1 are also converted, except mach-u300
that requires clocks before irqs.

* 'clk-of-init-v2_for-3.13' of https://github.com/shesselba/linux-dove: (29 commits)
  ARM: vt8500: remove custom .init_time hook
  ARM: vexpress: remove custom .init_time hook
  ARM: tegra: remove custom .init_time hook
  ARM: sunxi: remove custom .init_time hook
  ARM: sti: remove custom .init_time hook
  ARM: socfpga: remove custom .init_time hook
  ARM: rockchip: remove custom .init_time hook
  ARM: prima2: remove custom .init_time hook
  ARM: nspire: remove custom .init_time hook
  ARM: nomadik: remove custom .init_time hook
  ARM: mxs: remove custom .init_time hook
  ARM: kirkwood: remove custom .init_time hook
  ARM: imx: remove custom .init_time hook
  ARM: highbank: remove custom .init_time hook
  ARM: exynos: remove custom .init_time hook
  ARM: dove: remove custom .init_time hook
  ARM: bcm2835: remove custom .init_time hook
  ARM: bcm: provide common arch init for DT clocks
  ARM: call of_clk_init from default time_init handler
  ARM: vt8500: prepare for arch-wide .init_time callback
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/kernel/time.c

@@ -11,25 +11,26 @@
  *  This file contains the ARM-specific time handling details:
  *  reading the RTC at bootup, etc...
  */
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/profile.h>
 #include <linux/sched.h>
+#include <linux/sched_clock.h>
 #include <linux/smp.h>
+#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/profile.h>
 #include <linux/timer.h>
-#include <linux/clocksource.h>
-#include <linux/irq.h>
-#include <linux/sched_clock.h>
 
-#include <asm/thread_info.h>
-#include <asm/stacktrace.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/stacktrace.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
@@ -116,8 +117,12 @@ int __init register_persistent_clock(clock_access_fn read_boot,
 
 void __init time_init(void)
 {
-	if (machine_desc->init_time)
+	if (machine_desc->init_time) {
 		machine_desc->init_time();
-	else
+	} else {
+#ifdef CONFIG_COMMON_CLK
+		of_clk_init(NULL);
+#endif
 		clocksource_of_init();
+	}
 }

arch/arm/mach-bcm/board_bcm281xx.c

@@ -68,7 +68,6 @@ static void __init board_init(void)
 static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
 
 DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-	.init_time = clocksource_of_init,
 	.init_machine = board_init,
 	.restart = bcm_kona_restart,
 	.dt_compat = bcm11351_dt_compat,

arch/arm/mach-bcm2835/bcm2835.c

@@ -18,7 +18,6 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -134,7 +133,6 @@ DT_MACHINE_START(BCM2835, "BCM2835")
 	.init_irq = bcm2835_init_irq,
 	.handle_irq = bcm2835_handle_irq,
 	.init_machine = bcm2835_init,
-	.init_time = clocksource_of_init,
 	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END

arch/arm/mach-dove/board-dt.c

@@ -10,17 +10,13 @@
 
 #include <linux/init.h>
 #include <linux/clk-provider.h>
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/usb-ehci-orion.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include <mach/dove.h>
 #include <mach/pm.h>
 #include <plat/common.h>
-#include <plat/irq.h>
 #include "common.h"
 
 /*
@@ -45,12 +41,6 @@ static void __init dove_legacy_clk_init(void)
 			 of_clk_get_from_provider(&clkspec));
 }
 
-static void __init dove_dt_time_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void __init dove_dt_init_early(void)
 {
 	mvebu_mbus_init("marvell,dove-mbus",
@@ -84,7 +74,6 @@ static const char * const dove_dt_board_compat[] = {
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
 	.init_early	= dove_dt_init_early,
-	.init_time	= dove_dt_time_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,

arch/arm/mach-exynos/common.c

@@ -26,8 +26,6 @@
 #include <linux/export.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/irqchip/chained_irq.h>
 
@@ -367,12 +365,6 @@ static void __init exynos5_map_io(void)
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-void __init exynos_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 struct bus_type exynos_subsys = {
 	.name		= "exynos-core",
 	.dev_name	= "exynos-core",

arch/arm/mach-exynos/common.h

@@ -16,7 +16,6 @@
 #include <linux/of.h>
 
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-void exynos_init_time(void);
 
 struct map_desc;
 void exynos_init_io(void);

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -16,7 +16,6 @@
 #include <linux/of_fdt.h>
 #include <linux/serial_core.h>
 #include <linux/memblock.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <plat/mfc.h>
@@ -54,7 +53,6 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.init_early	= exynos_firmware_init,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 	.reserve	= exynos4_reserve,

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -13,7 +13,6 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/regs-pmu.h>
@@ -76,7 +75,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos_init_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,

arch/arm/mach-highbank/highbank.c

@@ -24,7 +24,6 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/amba/bus.h>
-#include <linux/clk-provider.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
@@ -83,20 +82,6 @@ static void __init highbank_init_irq(void)
 	}
 }
 
-static void __init highbank_timer_init(void)
-{
-	struct device_node *np;
-
-	/* Map system registers */
-	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
-	sregs_base = of_iomap(np, 0);
-	WARN_ON(!sregs_base);
-
-	of_clk_init(NULL);
-
-	clocksource_of_init();
-}
-
 static void highbank_power_off(void)
 {
 	highbank_set_pwr_shutdown();
@@ -155,6 +140,13 @@ static struct notifier_block highbank_platform_nb = {
 
 static void __init highbank_init(void)
 {
+	struct device_node *np;
+
+	/* Map system registers */
+	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	sregs_base = of_iomap(np, 0);
+	WARN_ON(!sregs_base);
+
 	pm_power_off = highbank_power_off;
 	highbank_pm_init();
 
@@ -176,7 +168,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
 #endif
 	.smp		= smp_ops(highbank_smp_ops),
 	.init_irq	= highbank_init_irq,
-	.init_time	= highbank_timer_init,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 	.restart	= highbank_restart,

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -11,6 +11,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/err.h>
 
@@ -131,8 +132,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 {
 	int i;
 
-	of_clk_init(NULL);
-
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
 	clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
@@ -465,12 +464,16 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	return 0;
 }
 
-int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
-			unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init_dt(struct device_node *np)
+{
+	mx51_clocks_init(0, 0, 0, 0);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+
+static void __init mx53_clocks_init(struct device_node *np)
 {
 	int i;
 	unsigned long r;
-	struct device_node *np;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -529,12 +532,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			pr_err("i.MX53 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+	mx5_clocks_common_init(0, 0, 0, 0);
 
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
 	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
@@ -566,16 +568,5 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 
 	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
 	clk_set_rate(clk[usboh3_per_gate], r);
-
-	return 0;
-}
-
-int __init mx51_clocks_init_dt(void)
-{
-	return mx51_clocks_init(0, 0, 0, 0);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	return mx53_clocks_init(0, 0, 0, 0);
 }
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);

arch/arm/mach-imx/common.h

@@ -63,13 +63,9 @@ extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
 extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
 extern int mx25_clocks_init_dt(void);
 extern int mx27_clocks_init_dt(void);
 extern int mx31_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);

arch/arm/mach-imx/imx51-dt.c

@@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = {
 	NULL
 };
 
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= mx51_init_irq,
 	.handle_irq	= imx51_handle_irq,
-	.init_time	= imx51_timer_init,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,

arch/arm/mach-imx/mach-imx53.c

@@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = {
 	NULL
 };
 
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= mx53_init_irq,
 	.handle_irq	= imx53_handle_irq,
-	.init_time	= imx53_timer_init,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,

arch/arm/mach-imx/mach-imx6q.c

@@ -11,9 +11,7 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/export.h>
@@ -192,6 +190,9 @@ static void __init imx6q_1588_init(void)
 
 static void __init imx6q_init_machine(void)
 {
+	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+			      imx6q_revision());
+
 	imx6q_enet_phy_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -293,14 +294,6 @@ static void __init imx6q_init_irq(void)
 	irqchip_init();
 }
 
-static void __init imx6q_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-			      imx6q_revision());
-}
-
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
@@ -311,7 +304,6 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
-	.init_time	= imx6q_timer_init,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,

arch/arm/mach-imx/mach-imx6sl.c

@@ -7,7 +7,6 @@
  *
  */
 
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -31,11 +30,6 @@ static void __init imx6sl_init_irq(void)
 	irqchip_init();
 }
 
-static void __init imx6sl_timer_init(void)
-{
-	of_clk_init(NULL);
-}
-
 static const char *imx6sl_dt_compat[] __initdata = {
 	"fsl,imx6sl",
 	NULL,
@@ -44,7 +38,6 @@ static const char *imx6sl_dt_compat[] __initdata = {
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
 	.map_io		= debug_ll_io_init,
 	.init_irq	= imx6sl_init_irq,
-	.init_time	= imx6sl_timer_init,
 	.init_machine	= imx6sl_init_machine,
 	.dt_compat	= imx6sl_dt_compat,
 	.restart	= mxc_restart,

arch/arm/mach-imx/mach-vf610.c

@@ -8,9 +8,7 @@
  */
 
 #include <linux/of_platform.h>
-#include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -28,12 +26,6 @@ static void __init vf610_init_irq(void)
 	irqchip_init();
 }
 
-static void __init vf610_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static const char *vf610_dt_compat[] __initdata = {
 	"fsl,vf610",
 	NULL,
@@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = {
 
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
 	.init_irq	= vf610_init_irq,
-	.init_time	= vf610_init_time,
 	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
 	.restart	= mxc_restart,

arch/arm/mach-kirkwood/board-dt.c

@@ -15,7 +15,6 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/irqchip.h>
 #include <linux/kexec.h>
@@ -66,12 +65,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	clk_prepare_enable(clk);
 }
 
-static void __init kirkwood_dt_time_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void __init kirkwood_dt_init_early(void)
 {
 	mvebu_mbus_init("marvell,kirkwood-mbus",
@@ -122,7 +115,6 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_dt_init_early,
-	.init_time	= kirkwood_dt_time_init,
 	.init_machine	= kirkwood_dt_init,
 	.restart	= kirkwood_restart,
 	.dt_compat	= kirkwood_dt_board_compat,

arch/arm/mach-mxs/mach-mxs.c

@@ -13,8 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -490,16 +488,6 @@ static void mxs_restart(enum reboot_mode mode, const char *cmd)
 	soft_restart(0);
 }
 
-static void __init mxs_timer_init(void)
-{
-	if (of_machine_is_compatible("fsl,imx23"))
-		mx23_clocks_init();
-	else
-		mx28_clocks_init();
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
 	"fsl,imx23",
@@ -508,7 +496,6 @@ static const char *mxs_dt_compat[] __initdata = {
 
 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.handle_irq	= icoll_handle_irq,
-	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
 	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,

arch/arm/mach-nomadik/cpu-8815.c

@@ -25,8 +25,6 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_data/clk-nomadik.h>
-#include <linux/clocksource.h>
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
 #include <linux/of_address.h>
@@ -111,39 +109,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd)
 	writel(1, srcbase + 0x18);
 }
 
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-static void __init cpu8815_timer_init_of(void)
-{
-	struct device_node *mtu;
-	void __iomem *base;
-	int irq;
-	u32 src_cr;
-
-	/* We need this to be up now */
-	nomadik_clk_init();
-
-	mtu = of_find_node_by_path("/mtu@101e2000");
-	if (!mtu)
-		return;
-	base = of_iomap(mtu, 0);
-	if (WARN_ON(!base))
-		return;
-	irq = irq_of_parse_and_map(mtu, 0);
-
-	pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(base);
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, base);
-
-	clocksource_of_init();
-}
-
 /*
  * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
  * to simply request an IRQ passed as a resource. So the GPIO pin needs
@@ -226,7 +191,6 @@ static const char * cpu8815_board_compat[] = {
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
 	.map_io		= cpu8815_map_io,
-	.init_time	= cpu8815_timer_init_of,
 	.init_machine	= cpu8815_init_of,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,

arch/arm/mach-nspire/nspire.c

@@ -14,11 +14,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-vic.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -65,12 +63,6 @@ static void __init nspire_init(void)
 			nspire_auxdata, NULL);
 }
 
-static void __init nspire_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void nspire_restart(char mode, const char *cmd)
 {
 	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
@@ -83,7 +75,6 @@ static void nspire_restart(char mode, const char *cmd)
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
 	.map_io		= nspire_map_io,
-	.init_time	= nspire_init_time,
 	.init_machine	= nspire_init,
 	.restart	= nspire_restart,
 MACHINE_END

arch/arm/mach-prima2/common.c

@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <asm/sizes.h>
@@ -21,13 +20,6 @@ void __init sirfsoc_init_late(void)
 	sirfsoc_pm_init();
 }
 
-static __init void sirfsoc_init_time(void)
-{
-	/* initialize clocking early, we want to set the OS timer */
-	sirfsoc_of_clk_init();
-	clocksource_of_init();
-}
-
 static __init void sirfsoc_map_io(void)
 {
 	sirfsoc_map_lluart();
@@ -43,7 +35,6 @@ static const char *atlas6_dt_match[] __initdata = {
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = atlas6_dt_match,
 	.restart	= sirfsoc_restart,
@@ -59,7 +50,6 @@ static const char *prima2_dt_match[] __initdata = {
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.dma_zone_size	= SZ_256M,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = prima2_dt_match,
@@ -77,7 +67,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.smp            = smp_ops(sirfsoc_smp_ops),
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = marco_dt_match,
 	.restart	= sirfsoc_restart,

arch/arm/mach-prima2/common.h

@@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
 extern void __init sirfsoc_of_irq_init(void);
-extern void __init sirfsoc_of_clk_init(void);
 extern void sirfsoc_restart(enum reboot_mode, const char *);
 extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
 

arch/arm/mach-rockchip/rockchip.c

@@ -19,18 +19,10 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
-#include <linux/dw_apb_timer.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 
-static void __init rockchip_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void __init rockchip_dt_init(void)
 {
 	l2x0_of_init(0, ~0UL);
@@ -47,6 +39,5 @@ static const char * const rockchip_board_dt_compat[] = {
 
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.init_machine	= rockchip_dt_init,
-	.init_time	= rockchip_timer_init,
 	.dt_compat	= rockchip_board_dt_compat,
 MACHINE_END

arch/arm/mach-socfpga/socfpga.c

@@ -14,7 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -107,7 +106,6 @@ static void __init socfpga_cyclone5_init(void)
 {
 	l2x0_of_init(0, ~0UL);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	of_clk_init(NULL);
 	socfpga_init_clocks();
 }
 

arch/arm/mach-sti/board-dt.c

@@ -7,9 +7,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <linux/irq.h>
+#include <linux/of_platform.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
@@ -28,11 +27,10 @@ void __init stih41x_l2x0_init(void)
 	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
 }
 
-static void __init stih41x_timer_init(void)
+static void __init stih41x_machine_init(void)
 {
-	of_clk_init(NULL);
-	clocksource_of_init();
 	stih41x_l2x0_init();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *stih41x_dt_match[] __initdata = {
@@ -42,7 +40,7 @@ static const char *stih41x_dt_match[] __initdata = {
 };
 
 DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
-	.init_time	= stih41x_timer_init,
+	.init_machine	= stih41x_machine_init,
 	.smp		= smp_ops(sti_smp_ops),
 	.dt_compat	= stih41x_dt_match,
 MACHINE_END

arch/arm/mach-sunxi/sunxi.c

@@ -10,7 +10,6 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,8 +19,6 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <linux/clk/sunxi.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
@@ -116,12 +113,6 @@ static void sunxi_setup_restart(void)
 	arm_pm_restart = of_id->data;
 }
 
-static void __init sunxi_timer_init(void)
-{
-	sunxi_init_clocks();
-	clocksource_of_init();
-}
-
 static void __init sunxi_dt_init(void)
 {
 	sunxi_setup_restart();
@@ -140,6 +131,5 @@ static const char * const sunxi_board_dt_compat[] = {
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
 	.init_machine	= sunxi_dt_init,
-	.init_time	= sunxi_timer_init,
 	.dt_compat	= sunxi_board_dt_compat,
 MACHINE_END

arch/arm/mach-tegra/common.c

@@ -24,7 +24,6 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/irqchip.h>
-#include <linux/clk-provider.h>
 
 #include <asm/hardware/cache-l2x0.h>
 
@@ -61,8 +60,7 @@ u32 tegra_uart_config[4] = {
 #ifdef CONFIG_OF
 void __init tegra_dt_init_irq(void)
 {
-	of_clk_init(NULL);
-	tegra_pmc_init();
+	tegra_pmc_init_irq();
 	tegra_init_irq();
 	irqchip_init();
 	tegra_legacy_irq_syscore_init();

arch/arm/mach-tegra/pmc.c

@@ -285,13 +285,10 @@ static const struct of_device_id matches[] __initconst = {
 	{ }
 };
 
-static void __init tegra_pmc_parse_dt(void)
+void __init tegra_pmc_init_irq(void)
 {
 	struct device_node *np;
-	u32 prop;
-	enum tegra_suspend_mode suspend_mode;
-	u32 core_good_time[2] = {0, 0};
-	u32 lp0_vec[2] = {0, 0};
+	u32 val;
 
 	np = of_find_matching_node(NULL, matches);
 	BUG_ON(!np);
@@ -300,6 +297,26 @@ static void __init tegra_pmc_parse_dt(void)
 
 	tegra_pmc_invert_interrupt = of_property_read_bool(np,
 				     "nvidia,invert-interrupt");
+
+	val = tegra_pmc_readl(PMC_CTRL);
+	if (tegra_pmc_invert_interrupt)
+		val |= PMC_CTRL_INTR_LOW;
+	else
+		val &= ~PMC_CTRL_INTR_LOW;
+	tegra_pmc_writel(val, PMC_CTRL);
+}
+
+void __init tegra_pmc_init(void)
+{
+	struct device_node *np;
+	u32 prop;
+	enum tegra_suspend_mode suspend_mode;
+	u32 core_good_time[2] = {0, 0};
+	u32 lp0_vec[2] = {0, 0};
+
+	np = of_find_matching_node(NULL, matches);
+	BUG_ON(!np);
+
 	tegra_pclk = of_clk_get_by_name(np, "pclk");
 	WARN_ON(IS_ERR(tegra_pclk));
 
@@ -365,17 +382,3 @@ static void __init tegra_pmc_parse_dt(void)
 
 	pmc_pm_data.suspend_mode = suspend_mode;
 }
-
-void __init tegra_pmc_init(void)
-{
-	u32 val;
-
-	tegra_pmc_parse_dt();
-
-	val = tegra_pmc_readl(PMC_CTRL);
-	if (tegra_pmc_invert_interrupt)
-		val |= PMC_CTRL_INTR_LOW;
-	else
-		val &= ~PMC_CTRL_INTR_LOW;
-	tegra_pmc_writel(val, PMC_CTRL);
-}

arch/arm/mach-tegra/pmc.h

@@ -39,6 +39,7 @@ bool tegra_pmc_cpu_is_powered(int cpuid);
 int tegra_pmc_cpu_power_on(int cpuid);
 int tegra_pmc_cpu_remove_clamping(int cpuid);
 
+void tegra_pmc_init_irq(void);
 void tegra_pmc_init(void);
 
 #endif

arch/arm/mach-tegra/tegra.c

@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -44,6 +43,7 @@
 #include "common.h"
 #include "fuse.h"
 #include "iomap.h"
+#include "pmc.h"
 
 static void __init tegra_dt_init(void)
 {
@@ -51,6 +51,8 @@ static void __init tegra_dt_init(void)
 	struct soc_device *soc_dev;
 	struct device *parent = NULL;
 
+	tegra_pmc_init();
+
 	tegra_clocks_apply_init_table();
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
@@ -119,7 +121,6 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
 	.smp		= smp_ops(tegra_smp_ops),
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_dt_init_irq,
-	.init_time	= clocksource_of_init,
 	.init_machine	= tegra_dt_init,
 	.init_late	= tegra_dt_init_late,
 	.restart	= tegra_assert_system_reset,

arch/arm/mach-vexpress/v2m.c

 /*
  * Versatile Express V2M Motherboard Support
  */
-#include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -22,7 +20,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/vexpress.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -422,16 +419,8 @@ void __init v2m_dt_init_early(void)
 			pr_warning("vexpress: DT HBI (%x) is not matching "
 					"hardware (%x)!\n", dt_hbi, hbi);
 	}
-}
-
-static void __init v2m_dt_timer_init(void)
-{
-	of_clk_init(NULL);
 
-	clocksource_of_init();
-
-	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
-				24000000);
+	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
 }
 
 static const struct of_device_id v2m_dt_bus_match[] __initconst = {
@@ -458,6 +447,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
 	.map_io		= v2m_dt_map_io,
 	.init_early	= v2m_dt_init_early,
-	.init_time	= v2m_dt_timer_init,
 	.init_machine	= v2m_dt_init,
 MACHINE_END

arch/arm/mach-vt8500/common.h

-/* linux/arch/arm/mach-vt8500/dt_common.h
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-
-#include <linux/of.h>
-
-/* defined in drivers/clk/clk-vt8500.c */
-void __init vtwm_clk_init(void __iomem *pmc_base);
-
-#endif

arch/arm/mach-vt8500/vt8500.c

@@ -18,7 +18,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
@@ -33,8 +32,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include "common.h"
-
 #define LEGACY_GPIO_BASE	0xD8110000
 #define LEGACY_PMC_BASE		0xD8130000
 
@@ -162,8 +159,6 @@ void __init vt8500_init(void)
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 
-	vtwm_clk_init(pmc_base);
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -180,7 +175,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
 	.dt_compat	= vt8500_dt_compat,
 	.map_io		= vt8500_map_io,
 	.init_machine	= vt8500_init,
-	.init_time	= clocksource_of_init,
 	.restart	= vt8500_restart,
 MACHINE_END
 

drivers/clk/clk-bcm2835.c

@@ -20,14 +20,8 @@
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/clk/bcm2835.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 
-static const struct of_device_id clk_match[] __initconst = {
-	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
-	{ }
-};
-
 /*
  * These are fixed clocks. They're probably not all root clocks and it may
  * be possible to turn them on and off but until this is mapped out better
@@ -63,6 +57,4 @@ void __init bcm2835_init_clocks(void)
 	ret = clk_register_clkdev(clk, NULL, "20215000.uart");
 	if (ret)
 		pr_err("uart1_pclk alias not registered\n");
-
-	of_clk_init(clk_match);
 }

drivers/clk/clk-highbank.c

@@ -20,8 +20,7 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-extern void __iomem *sregs_base;
+#include <linux/of_address.h>
 
 #define HB_PLL_LOCK_500		0x20000000
 #define HB_PLL_LOCK		0x10000000
@@ -280,6 +279,7 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
 	const char *clk_name = node->name;
 	const char *parent_name;
 	struct clk_init_data init;
+	struct device_node *srnp;
 	int rc;
 
 	rc = of_property_read_u32(node, "reg", &reg);
@@ -290,7 +290,11 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
 	if (WARN_ON(!hb_clk))
 		return NULL;
 
-	hb_clk->reg = sregs_base + reg;
+	/* Map system registers */
+	srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	hb_clk->reg = of_iomap(srnp, 0);
+	BUG_ON(!hb_clk->reg);
+	hb_clk->reg += reg;
 
 	of_property_read_string(node, "clock-output-names", &clk_name);
 

drivers/clk/clk-nomadik.c

@@ -27,6 +27,14 @@
  */
 
 #define SRC_CR			0x00U
+#define SRC_CR_T0_ENSEL		BIT(15)
+#define SRC_CR_T1_ENSEL		BIT(17)
+#define SRC_CR_T2_ENSEL		BIT(19)
+#define SRC_CR_T3_ENSEL		BIT(21)
+#define SRC_CR_T4_ENSEL		BIT(23)
+#define SRC_CR_T5_ENSEL		BIT(25)
+#define SRC_CR_T6_ENSEL		BIT(27)
+#define SRC_CR_T7_ENSEL		BIT(29)
 #define SRC_XTALCR		0x0CU
 #define SRC_XTALCR_XTALTIMEN	BIT(20)
 #define SRC_XTALCR_SXTALDIS	BIT(19)
@@ -54,6 +62,79 @@ static DEFINE_SPINLOCK(src_lock);
 /* Base address of the SRC */
 static void __iomem *src_base;
 
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+				unsigned long code,
+				void *unused)
+{
+	u32 val;
+
+	/* The main chrystal need to be enabled for reboot to work */
+	val = readl(src_base + SRC_XTALCR);
+	val &= ~SRC_XTALCR_MXTALOVER;
+	val |= SRC_XTALCR_MXTALEN;
+	pr_crit("force-enabling MXTALO\n");
+	writel(val, src_base + SRC_XTALCR);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+	.notifier_call = nomadik_clk_reboot_handler,
+};
+
+static const struct of_device_id nomadik_src_match[] __initconst = {
+	{ .compatible = "stericsson,nomadik-src" },
+	{ /* sentinel */ }
+};
+
+static void nomadik_src_init(void)
+{
+	struct device_node *np;
+	u32 val;
+
+	np = of_find_matching_node(NULL, nomadik_src_match);
+	if (!np) {
+		pr_crit("no matching node for SRC, aborting clock init\n");
+		return;
+	}
+	src_base = of_iomap(np, 0);
+	if (!src_base) {
+		pr_err("%s: must have src parent node with REGS (%s)\n",
+		       __func__, np->name);
+		return;
+	}
+
+	/* Set all timers to use the 2.4 MHz TIMCLK */
+	val = readl(src_base + SRC_CR);
+	val |= SRC_CR_T0_ENSEL;
+	val |= SRC_CR_T1_ENSEL;
+	val |= SRC_CR_T2_ENSEL;
+	val |= SRC_CR_T3_ENSEL;
+	val |= SRC_CR_T4_ENSEL;
+	val |= SRC_CR_T5_ENSEL;
+	val |= SRC_CR_T6_ENSEL;
+	val |= SRC_CR_T7_ENSEL;
+	writel(val, src_base + SRC_CR);
+
+	val = readl(src_base + SRC_XTALCR);
+	pr_info("SXTALO is %s\n",
+		(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+	pr_info("MXTAL is %s\n",
+		(val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+	if (of_property_read_bool(np, "disable-sxtalo")) {
+		/* The machine uses an external oscillator circuit */
+		val |= SRC_XTALCR_SXTALDIS;
+		pr_info("disabling SXTALO\n");
+	}
+	if (of_property_read_bool(np, "disable-mxtalo")) {
+		/* Disable this too: also run by external oscillator */
+		val |= SRC_XTALCR_MXTALOVER;
+		val &= ~SRC_XTALCR_MXTALEN;
+		pr_info("disabling MXTALO\n");
+	}
+	writel(val, src_base + SRC_XTALCR);
+	register_reboot_notifier(&nomadik_clk_reboot_notifier);
+}
+
 /**
  * struct clk_pll1 - Nomadik PLL1 clock
  * @hw: corresponding clock hardware entry
@@ -431,6 +512,9 @@ static void __init of_nomadik_pll_setup(struct device_node *np)
 	const char *parent_name;
 	u32 pll_id;
 
+	if (!src_base)
+		nomadik_src_init();
+
 	if (of_property_read_u32(np, "pll-id", &pll_id)) {
 		pr_err("%s: PLL \"%s\" missing pll-id property\n",
 			__func__, clk_name);
@@ -441,6 +525,8 @@ static void __init of_nomadik_pll_setup(struct device_node *np)
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
+CLK_OF_DECLARE(nomadik_pll_clk,
+	"st,nomadik-pll-clock", of_nomadik_pll_setup);
 
 static void __init of_nomadik_hclk_setup(struct device_node *np)
 {
@@ -448,6 +534,9 @@ static void __init of_nomadik_hclk_setup(struct device_node *np)
 	const char *clk_name = np->name;
 	const char *parent_name;
 
+	if (!src_base)
+		nomadik_src_init();
+
 	parent_name = of_clk_get_parent_name(np, 0);
 	/*
 	 * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
@@ -460,6 +549,8 @@ static void __init of_nomadik_hclk_setup(struct device_node *np)
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
+CLK_OF_DECLARE(nomadik_hclk_clk,
+	"st,nomadik-hclk-clock", of_nomadik_hclk_setup);
 
 static void __init of_nomadik_src_clk_setup(struct device_node *np)
 {
@@ -468,6 +559,9 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np)
 	const char *parent_name;
 	u32 clk_id;
 
+	if (!src_base)
+		nomadik_src_init();
+
 	if (of_property_read_u32(np, "clock-id", &clk_id)) {
 		pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
 			__func__, clk_name);
@@ -478,89 +572,5 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np)
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
-
-static const struct of_device_id nomadik_src_match[] __initconst = {
-	{ .compatible = "stericsson,nomadik-src" },
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id nomadik_src_clk_match[] __initconst = {
-	{
-		.compatible = "fixed-clock",
-		.data = of_fixed_clk_setup,
-	},
-	{
-		.compatible = "fixed-factor-clock",
-		.data = of_fixed_factor_clk_setup,
-	},
-	{
-		.compatible = "st,nomadik-pll-clock",
-		.data = of_nomadik_pll_setup,
-	},
-	{
-		.compatible = "st,nomadik-hclk-clock",
-		.data = of_nomadik_hclk_setup,
-	},
-	{
-		.compatible = "st,nomadik-src-clock",
-		.data = of_nomadik_src_clk_setup,
-	},
-	{ /* sentinel */ }
-};
-
-static int nomadik_clk_reboot_handler(struct notifier_block *this,
-				unsigned long code,
-				void *unused)
-{
-	u32 val;
-
-	/* The main chrystal need to be enabled for reboot to work */
-	val = readl(src_base + SRC_XTALCR);
-	val &= ~SRC_XTALCR_MXTALOVER;
-	val |= SRC_XTALCR_MXTALEN;
-	pr_crit("force-enabling MXTALO\n");
-	writel(val, src_base + SRC_XTALCR);
-	return NOTIFY_OK;
-}
-
-static struct notifier_block nomadik_clk_reboot_notifier = {
-	.notifier_call = nomadik_clk_reboot_handler,
-};
-
-void __init nomadik_clk_init(void)
-{
-	struct device_node *np;
-	u32 val;
-
-	np = of_find_matching_node(NULL, nomadik_src_match);
-	if (!np) {
-		pr_crit("no matching node for SRC, aborting clock init\n");
-		return;
-	}
-	src_base = of_iomap(np, 0);
-	if (!src_base) {
-		pr_err("%s: must have src parent node with REGS (%s)\n",
-		       __func__, np->name);
-		return;
-	}
-	val = readl(src_base + SRC_XTALCR);
-	pr_info("SXTALO is %s\n",
-		(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
-	pr_info("MXTAL is %s\n",
-		(val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
-	if (of_property_read_bool(np, "disable-sxtalo")) {
-		/* The machine uses an external oscillator circuit */
-		val |= SRC_XTALCR_SXTALDIS;
-		pr_info("disabling SXTALO\n");
-	}
-	if (of_property_read_bool(np, "disable-mxtalo")) {
-		/* Disable this too: also run by external oscillator */
-		val |= SRC_XTALCR_MXTALOVER;
-		val &= ~SRC_XTALCR_MXTALEN;
-		pr_info("disabling MXTALO\n");
-	}
-	writel(val, src_base + SRC_XTALCR);
-	register_reboot_notifier(&nomadik_clk_reboot_notifier);
-
-	of_clk_init(nomadik_src_clk_match);
-}
+CLK_OF_DECLARE(nomadik_src_clk,
+	"st,nomadik-src-clock", of_nomadik_src_clk_setup);

drivers/clk/clk-prima2.c

@@ -1015,16 +1015,6 @@ static struct clk_std clk_usb1 = {
 	},
 };
 
-static struct of_device_id clkc_ids[] = {
-	{ .compatible = "sirf,prima2-clkc" },
-	{},
-};
-
-static struct of_device_id rsc_ids[] = {
-	{ .compatible = "sirf,prima2-rsc" },
-	{},
-};
-
 enum prima2_clk_index {
 	/* 0    1     2      3      4      5      6       7         8      9 */
 	rtc,    osc,   pll1,  pll2,  pll3,  mem,   sys,   security, dsp,   gps,
@@ -1082,24 +1072,16 @@ static struct clk_hw *prima2_clk_hw_array[maxclk] __initdata = {
 static struct clk *prima2_clks[maxclk];
 static struct clk_onecell_data clk_data;
 
-void __init sirfsoc_of_clk_init(void)
+static void __init sirfsoc_clk_init(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *rscnp;
 	int i;
 
-	np = of_find_matching_node(NULL, rsc_ids);
-	if (!np)
-		panic("unable to find compatible rsc node in dtb\n");
-
-	sirfsoc_rsc_vbase = of_iomap(np, 0);
+	rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+	sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
 	if (!sirfsoc_rsc_vbase)
 		panic("unable to map rsc registers\n");
-
-	of_node_put(np);
-
-	np = of_find_matching_node(NULL, clkc_ids);
-	if (!np)
-		return;
+	of_node_put(rscnp);
 
 	sirfsoc_clk_vbase = of_iomap(np, 0);
 	if (!sirfsoc_clk_vbase)
@@ -1124,3 +1106,4 @@ void __init sirfsoc_of_clk_init(void)
 
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 }
+CLK_OF_DECLARE(sirfsoc_clk, "sirf,prima2-clkc", sirfsoc_clk_init);

drivers/clk/clk-vt8500.c

@@ -15,11 +15,14 @@
 
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 
+#define LEGACY_PMC_BASE		0xD8130000
+
 /* All clocks share the same lock as none can be changed concurrently */
 static DEFINE_SPINLOCK(_lock);
 
@@ -53,6 +56,21 @@ struct clk_pll {
 
 static void __iomem *pmc_base;
 
+static __init void vtwm_set_pmc_base(void)
+{
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+
+	if (np)
+		pmc_base = of_iomap(np, 0);
+	else
+		pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+	of_node_put(np);
+
+	if (!pmc_base)
+		pr_err("%s:of_iomap(pmc) failed\n", __func__);
+}
+
 #define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
 
 #define VT8500_PMC_BUSY_MASK		0x18
@@ -222,6 +240,9 @@ static __init void vtwm_device_clk_init(struct device_node *node)
 	int rc;
 	int clk_init_flags = 0;
 
+	if (!pmc_base)
+		vtwm_set_pmc_base();
+
 	dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
 	if (WARN_ON(!dev_clk))
 		return;
@@ -636,6 +657,9 @@ static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
 	struct clk_init_data init;
 	int rc;
 
+	if (!pmc_base)
+		vtwm_set_pmc_base();
+
 	rc = of_property_read_u32(node, "reg", &reg);
 	if (WARN_ON(rc))
 		return;
@@ -694,13 +718,3 @@ static void __init wm8850_pll_init(struct device_node *node)
 	vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
 }
 CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);
-
-void __init vtwm_clk_init(void __iomem *base)
-{
-	if (!base)
-		return;
-
-	pmc_base = base;
-
-	of_clk_init(NULL);
-}

drivers/clk/mxs/clk-imx23.c

@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -100,16 +101,16 @@ static enum imx23_clk clks_init_on[] __initdata = {
 	cpu, hbus, xbus, emi, uart,
 };
 
-int __init mx23_clocks_init(void)
+static void __init mx23_clocks_init(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *dcnp;
 	u32 i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
-	digctrl = of_iomap(np, 0);
+	dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+	digctrl = of_iomap(dcnp, 0);
 	WARN_ON(!digctrl);
+	of_node_put(dcnp);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
 	clkctrl = of_iomap(np, 0);
 	WARN_ON(!clkctrl);
 
@@ -162,7 +163,7 @@ int __init mx23_clocks_init(void)
 		if (IS_ERR(clks[i])) {
 			pr_err("i.MX23 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clks[i]));
-			return PTR_ERR(clks[i]);
+			return;
 		}
 
 	clk_data.clks = clks;
@@ -172,5 +173,5 @@ int __init mx23_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	return 0;
 }
+CLK_OF_DECLARE(imx23_clkctrl, "fsl,imx23-clkctrl", mx23_clocks_init);

drivers/clk/mxs/clk-imx28.c

@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -154,16 +155,16 @@ static enum imx28_clk clks_init_on[] __initdata = {
 	cpu, hbus, xbus, emi, uart,
 };
 
-int __init mx28_clocks_init(void)
+static void __init mx28_clocks_init(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *dcnp;
 	u32 i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
-	digctrl = of_iomap(np, 0);
+	dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+	digctrl = of_iomap(dcnp, 0);
 	WARN_ON(!digctrl);
+	of_node_put(dcnp);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
 	clkctrl = of_iomap(np, 0);
 	WARN_ON(!clkctrl);
 
@@ -239,7 +240,7 @@ int __init mx28_clocks_init(void)
 		if (IS_ERR(clks[i])) {
 			pr_err("i.MX28 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clks[i]));
-			return PTR_ERR(clks[i]);
+			return;
 		}
 
 	clk_data.clks = clks;
@@ -250,6 +251,5 @@ int __init mx28_clocks_init(void)
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
-
-	return 0;
 }
+CLK_OF_DECLARE(imx28_clkctrl, "fsl,imx28-clkctrl", mx28_clocks_init);

drivers/clk/sunxi/clk-sunxi.c

@@ -16,7 +16,6 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
-#include <linux/clk/sunxi.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 
@@ -617,11 +616,8 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat
 	}
 }
 
-void __init sunxi_init_clocks(void)
+static void __init sunxi_init_clocks(struct device_node *np)
 {
-	/* Register all the simple and basic clocks on DT */
-	of_clk_init(NULL);
-
 	/* Register factor clocks */
 	of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
 
@@ -634,3 +630,8 @@ void __init sunxi_init_clocks(void)
 	/* Register gate clocks */
 	of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
 }
+CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks);
+CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks);
+CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks);

include/linux/clk/mxs.h

@@ -9,8 +9,6 @@
 #ifndef __LINUX_CLK_MXS_H
 #define __LINUX_CLK_MXS_H
 
-int mx23_clocks_init(void);
-int mx28_clocks_init(void);
 int mxs_saif_clkmux_select(unsigned int clkmux);
 
 #endif

include/linux/clk/sunxi.h

-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_CLK_SUNXI_H_
-#define __LINUX_CLK_SUNXI_H_
-
-void __init sunxi_init_clocks(void);
-
-#endif

include/linux/platform_data/clk-nomadik.h

-/* Minimal platform data header */
-void nomadik_clk_init(void);