Commit c95711d7 authored by Shubhi Garg's avatar Shubhi Garg Committed by Thierry Reding

arm64: tegra: Add support for IGX Orin

Add support for the NVIDIA IGX Orin development kit having P3701
module with P3740 carrier board.
Signed-off-by: default avatarShubhi Garg <shgarg@nvidia.com>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 49cbf04c
......@@ -9,6 +9,7 @@ DTC_FLAGS_tegra194-p2972-0000 := -@
DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
......@@ -25,4 +26,5 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
// SPDX-License-Identifier: GPL-2.0
#include "tegra234.dtsi"
/ {
compatible = "nvidia,p3701-0008", "nvidia,tegra234";
bus@0 {
i2c@3160000 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
label = "module";
vcc-supply = <&vdd_1v8_hs>;
address-width = <8>;
pagesize = <8>;
size = <256>;
read-only;
};
};
spi@3270000 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <102000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
mmc@3460000 {
status = "okay";
bus-width = <8>;
non-removable;
};
i2c@c240000 {
status = "okay";
};
rtc@c2a0000 {
status = "okay";
};
pmc@c360000 {
nvidia,invert-interrupt;
};
};
bpmp {
i2c {
status = "okay";
thermal-sensor@4c {
status = "okay";
reg = <0x4c>;
vcc-supply = <&vdd_1v8_ao>;
};
};
thermal {
status = "okay";
};
};
vdd_1v8_ao: regulator-vdd-1v8-ao {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8_AO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_1v8_hs: regulator-vdd-1v8-hs {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8_HS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_1v8_ls: regulator-vdd-1v8-ls {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8_LS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_3v3_ao: regulator-vdd-3v3-ao {
compatible = "regulator-fixed";
regulator-name = "vdd-AO-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_5v0_sys: regulator-vdd-5v0-sys {
compatible = "regulator-fixed";
regulator-name = "VIN_SYS_5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/gpio-keys.h>
#include "tegra234-p3701-0008.dtsi"
#include "tegra234-p3740-0002.dtsi"
/ {
model = "NVIDIA IGX Orin Development Kit";
compatible = "nvidia,p3740-0002+p3701-0008", "nvidia,p3701-0008", "nvidia,tegra234";
aliases {
serial0 = &tcu;
};
chosen {
stdout-path = "serial0:115200n8";
};
bus@0 {
host1x@13e00000 {
nvdec@15480000 {
status = "okay";
};
};
pcie@140e0000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8_ls>;
phys = <&p2u_gbe_4>, <&p2u_gbe_5>;
phy-names = "p2u-0", "p2u-1";
};
pcie@14100000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8_ao>;
phys = <&p2u_hsio_3>;
phy-names = "p2u-0";
};
pcie@14160000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8_ao>;
phys = <&p2u_hsio_7>, <&p2u_hsio_6>, <&p2u_hsio_5>,
<&p2u_hsio_4>;
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
};
pcie@141a0000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8_ls>;
phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
<&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
<&p2u_nvhs_6>, <&p2u_nvhs_7>;
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
"p2u-5", "p2u-6", "p2u-7";
};
pcie@141e0000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8_ls>;
phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
phy-names = "p2u-0", "p2u-1";
};
aconnect@2900000 {
status = "okay";
};
serial@3100000 {
compatible = "nvidia,tegra194-hsuart";
status = "okay";
};
i2c@3160000 {
status = "okay";
};
i2c@3180000 {
status = "okay";
};
i2c@3190000 {
status = "okay";
};
i2c@31b0000 {
status = "okay";
};
i2c@31c0000 {
status = "okay";
};
i2c@31e0000 {
status = "okay";
};
spi@3270000 {
status = "okay";
};
hda@3510000 {
nvidia,model = "NVIDIA IGX HDA";
status = "okay";
};
fuse@3810000 {
status = "okay";
};
i2c@c240000 {
status = "okay";
};
i2c@c250000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
status = "okay";
key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <BTN_1>;
};
key-power {
label = "Power";
gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_POWER>;
wakeup-event-action = <EV_ACT_ASSERTED>;
wakeup-source;
};
key-suspend {
label = "Suspend";
gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_SLEEP>;
};
};
serial {
status = "okay";
};
};
// SPDX-License-Identifier: GPL-2.0
/ {
compatible = "nvidia,p3740-0002";
bus@0 {
i2c@31c0000 {
/* carrier board ID EEPROM */
eeprom@55 {
compatible = "atmel,24c02";
reg = <0x55>;
label = "system";
vcc-supply = <&vdd_1v8_ls>;
address-width = <8>;
pagesize = <8>;
size = <256>;
read-only;
};
};
padctl@3520000 {
vclamp-usb-supply = <&vdd_1v8_ao>;
avdd-usb-supply = <&vdd_3v3_ao>;
status = "okay";
pads {
usb2 {
lanes {
usb2-0 {
nvidia,function = "xusb";
status = "okay";
};
usb2-1 {
nvidia,function = "xusb";
status = "okay";
};
usb2-2 {
nvidia,function = "xusb";
status = "okay";
};
usb2-3 {
nvidia,function = "xusb";
status = "okay";
};
};
};
usb3 {
lanes {
usb3-0 {
nvidia,function = "xusb";
status = "okay";
};
usb3-1 {
nvidia,function = "xusb";
status = "okay";
};
usb3-2 {
nvidia,function = "xusb";
status = "okay";
};
};
};
};
ports {
usb2-0 {
mode = "otg";
usb-role-switch;
status = "okay";
vbus-supply = <&vdd_5v0_sys>;
};
usb2-1 {
mode = "host";
status = "okay";
vbus-supply = <&vdd_5v0_sys>;
};
usb2-2 {
mode = "host";
status = "okay";
vbus-supply = <&vdd_5v0_sys>;
};
usb2-3 {
mode = "host";
status = "okay";
vbus-supply = <&vdd_5v0_sys>;
};
usb3-0 {
nvidia,usb2-companion = <2>;
status = "okay";
};
usb3-1 {
nvidia,usb2-companion = <0>;
status = "okay";
};
usb3-2 {
nvidia,usb2-companion = <1>;
status = "okay";
};
};
};
usb@3550000 {
status = "okay";
phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
phy-names = "usb2-0", "usb3-0";
};
usb@3610000 {
status = "okay";
phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
"usb3-0", "usb3-1", "usb3-2";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment