omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2

Split entry-macro.S for mach-omap1 and mach-omap2
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/include/mach/entry-macro.S

+/*
+ * arch/arm/mach-omap1/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
+
+#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+#define INT_IH2_IRQ		INT_7XX_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+

arch/arm/plat-omap/include/mach/entry-macro.S → arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -15,54 +15,6 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-#define INT_IH2_IRQ		INT_7XX_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
 
@@ -170,5 +122,3 @@
 
 		.macro	irq_prio_table
 		.endm
-
-#endif