Skip to content

L
linux
Commit ca914350 authored by Tomasz Figa's avatar Tomasz Figa Committed by Kukjin Kim
Browse files
Options

ARM: EXYNOS: Remove unused board files 

Since commit 383ffda2 ARM: EXYNOS: no more support non-DT for EXYNOS SoCs
all non-DT Exynos board files are not used anymore. This patch removes
them.
Signed-off-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 383ffda2
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 4417 deletions
arch/arm/mach-exynos/mach-armlex4210.c deleted 100644 → 0
View file @ 383ffda2
/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/sdhci.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_PERMANENT,
#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = EXYNOS4_GPX2(5),
.ext_cd_gpio_invert = 1,
.max_width = 4,
};
static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_PERMANENT,
.max_width = 4,
};
static void __init armlex4210_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
}
static void __init armlex4210_wlan_init(void)
{
/* enable */
s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
/* reset */
s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
/* wakeup */
s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
}
static struct resource armlex4210_smsc911x_resources[] = {
[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
[1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
| IRQF_TRIGGER_HIGH),
};
static struct smsc911x_platform_config smsc9215_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};
static struct platform_device armlex4210_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
.resource = armlex4210_smsc911x_resources,
.dev = {
.platform_data = &smsc9215_config,
},
};
static struct platform_device *armlex4210_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
&armlex4210_smsc911x,
&exynos4_device_ahci,
};
static void __init armlex4210_smsc911x_init(void)
{
u32 cs1;
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S5P_SROM_BW) &
~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
(0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
(1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
S5P_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S5P_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
(0x9 << S5P_SROM_BCX__TACP__SHIFT) |
(0xc << S5P_SROM_BCX__TCAH__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
(0x6 << S5P_SROM_BCX__TACC__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}
static void __init armlex4210_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
}
static void __init armlex4210_machine_init(void)
{
armlex4210_smsc911x_init();
armlex4210_sdhci_init();
armlex4210_wlan_init();
platform_add_devices(armlex4210_devices,
ARRAY_SIZE(armlex4210_devices));
}
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
.restart = exynos4_restart,
MACHINE_END
arch/arm/mach-exynos/mach-nuri.c deleted 100644 → 0
View file @ 383ffda2
/*
* linux/arch/arm/mach-exynos4/mach-nuri.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/i2c-gpio.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/power/max8903_charger.h>
#include <linux/power/max17042_battery.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/mfd/max8997.h>
#include <linux/mfd/max8997-private.h>
#include <linux/mmc/host.h>
#include <linux/fb.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <drm/exynos_drm.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <media/m5mols.h>
#include <media/s5k6aa.h>
#include <media/s5p_fimc.h>
#include <media/v4l2-mediabus.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/adc.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG256 | \
S5PV210_UFCON_RXTRIG256)
enum fixed_regulator_id {
FIXED_REG_ID_MMC = 0,
FIXED_REG_ID_MAX8903,
FIXED_REG_ID_CAM_A28V,
FIXED_REG_ID_CAM_12V,
FIXED_REG_ID_CAM_VT_15V,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
{
.hwport = 0,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
{
.hwport = 1,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
{
.hwport = 2,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
{
.hwport = 3,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
};
/* eMMC */
static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_ERASE),
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct regulator_consumer_supply emmc_supplies[] = {
REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "dw_mmc"),
};
static struct regulator_init_data emmc_fixed_voltage_init_data = {
.constraints = {
.name = "VMEM_VDD_2.8V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
.consumer_supplies = emmc_supplies,
};
static struct fixed_voltage_config emmc_fixed_voltage_config = {
.supply_name = "MASSMEMORY_EN (inverted)",
.microvolts = 2800000,
.gpio = EXYNOS4_GPL1(1),
.enable_high = false,
.init_data = &emmc_fixed_voltage_init_data,
};
static struct platform_device emmc_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_MMC,
.dev = {
.platform_data = &emmc_fixed_voltage_config,
},
};
/* SD */
static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
.ext_cd_gpio_invert = 1,
.cd_type = S3C_SDHCI_CD_GPIO,
};
/* WLAN */
static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
};
static void __init nuri_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
}
/* GPIO KEYS */
static struct gpio_keys_button nuri_gpio_keys_tables[] = {
{
.code = KEY_VOLUMEUP,
.gpio = EXYNOS4_GPX2(0), /* XEINT16 */
.desc = "gpio-keys: KEY_VOLUMEUP",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_VOLUMEDOWN,
.gpio = EXYNOS4_GPX2(1), /* XEINT17 */
.desc = "gpio-keys: KEY_VOLUMEDOWN",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_POWER,
.gpio = EXYNOS4_GPX2(7), /* XEINT23 */
.desc = "gpio-keys: KEY_POWER",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data nuri_gpio_keys_data = {
.buttons = nuri_gpio_keys_tables,
.nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
};
static struct platform_device nuri_gpio_keys = {
.name = "gpio-keys",
.dev = {
.platform_data = &nuri_gpio_keys_data,
},
};
#ifdef CONFIG_DRM_EXYNOS
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.xres = 1024,
.yres = 600,
.hsync_len = 40,
.left_margin = 79,
.right_margin = 200,
.vsync_len = 10,
.upper_margin = 10,
.lower_margin = 11,
.refresh = 60,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.default_win = 3,
.bpp = 32,
};
#else
/* Frame Buffer */
static struct s3c_fb_pd_win nuri_fb_win0 = {
.max_bpp = 24,
.default_bpp = 16,
.xres = 1024,
.yres = 600,
.virtual_x = 1024,
.virtual_y = 2 * 600,
};
static struct fb_videomode nuri_lcd_timing = {
.left_margin = 64,
.right_margin = 16,
.upper_margin = 64,
.lower_margin = 1,
.hsync_len = 48,
.vsync_len = 3,
.xres = 1024,
.yres = 600,
.refresh = 60,
};
static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
.win[0] = &nuri_fb_win0,
.vtiming = &nuri_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
{
int gpio = EXYNOS4_GPE1(5);
gpio_request(gpio, "LVDS_nSHDN");
gpio_direction_output(gpio, power);
gpio_free(gpio);
}
static int nuri_bl_init(struct device *dev)
{
return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
"LCD_LD0_EN");
}
static int nuri_bl_notify(struct device *dev, int brightness)
{
if (brightness < 1)
brightness = 0;
gpio_set_value(EXYNOS4_GPE2(3), 1);
return brightness;
}
static void nuri_bl_exit(struct device *dev)
{
gpio_free(EXYNOS4_GPE2(3));
}
/* nuri pwm backlight */
static struct platform_pwm_backlight_data nuri_backlight_data = {
.pwm_id = 0,
.pwm_period_ns = 30000,
.max_brightness = 100,
.dft_brightness = 50,
.init = nuri_bl_init,
.notify = nuri_bl_notify,
.exit = nuri_bl_exit,
};
static struct platform_device nuri_backlight_device = {
.name = "pwm-backlight",
.id = -1,
.dev = {
.parent = &s3c_device_timer[0].dev,
.platform_data = &nuri_backlight_data,
},
};
static struct plat_lcd_data nuri_lcd_platform_data = {
.set_power = nuri_lcd_power_on,
};
static struct platform_device nuri_lcd_device = {
.name = "platform-lcd",
.id = -1,
.dev = {
.platform_data = &nuri_lcd_platform_data,
},
};
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
/* TSP */
static struct mxt_platform_data mxt_platform_data = {
.x_line = 18,
.y_line = 11,
.x_size = 1024,
.y_size = 600,
.blen = 0x1,
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL_COUNTER,
.irqflags = IRQF_TRIGGER_FALLING,
};
static struct s3c2410_platform_i2c i2c3_data __initdata = {
.flags = 0,
.bus_num = 3,
.slave_addr = 0x10,
.frequency = 400 * 1000,
.sda_delay = 100,
};
static struct i2c_board_info i2c3_devs[] __initdata = {
{
I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
.platform_data = &mxt_platform_data,
.irq = IRQ_EINT(4),
},
};
static void __init nuri_tsp_init(void)
{
int gpio;
/* TOUCH_INT: XEINT_4 */
gpio = EXYNOS4_GPX0(4);
gpio_request(gpio, "TOUCH_INT");
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
}
static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
};
static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
};
static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
};
static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
};
static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
};
static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
};
static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
};
static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
};
static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
};
static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
};
static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
};
static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
};
static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
};
static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
};
static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
};
static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
};
static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
};
static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
};
static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
};
static struct regulator_consumer_supply __initdata max8997_charger_[] = {
REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
};
static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
};
static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
REGULATOR_SUPPLY("gps_clk", "bcm4751"),
REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
};
static struct regulator_init_data __initdata max8997_ldo1_data = {
.constraints = {
.name = "VADC_3.3V_C210",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
.consumer_supplies = max8997_ldo1_,
};
static struct regulator_init_data __initdata max8997_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V_C210",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo3_data = {
.constraints = {
.name = "VUSB_1.1V_C210",
.min_uV = 1100000,
.max_uV = 1100000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
.consumer_supplies = max8997_ldo3_,
};
static struct regulator_init_data __initdata max8997_ldo4_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
.consumer_supplies = max8997_ldo4_,
};
static struct regulator_init_data __initdata max8997_ldo5_data = {
.constraints = {
.name = "VHSIC_1.2V_C210",
.min_uV = 1200000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
.consumer_supplies = max8997_ldo5_,
};
static struct regulator_init_data __initdata max8997_ldo6_data = {
.constraints = {
.name = "VCC_1.8V_PDA",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
.consumer_supplies = nuri_max8997_ldo6_consumer,
};
static struct regulator_init_data __initdata max8997_ldo7_data = {
.constraints = {
.name = "CAM_ISP_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
.consumer_supplies = max8997_ldo7_,
};
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
.name = "VUSB+VDAC_3.3V_C210",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
.consumer_supplies = max8997_ldo8_,
};
static struct regulator_init_data __initdata max8997_ldo9_data = {
.constraints = {
.name = "VCC_2.8V_PDA",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V_C210",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo11_data = {
.constraints = {
.name = "LVDS_VDD3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
.consumer_supplies = max8997_ldo11_,
};
static struct regulator_init_data __initdata max8997_ldo12_data = {
.constraints = {
.name = "VT_CAM_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
.consumer_supplies = max8997_ldo12_,
};
static struct regulator_init_data __initdata max8997_ldo13_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
.consumer_supplies = max8997_ldo13_,
};
static struct regulator_init_data __initdata max8997_ldo14_data = {
.constraints = {
.name = "VCC_3.0V_MOTOR",
.min_uV = 3000000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
.consumer_supplies = max8997_ldo14_,
};
static struct regulator_init_data __initdata max8997_ldo15_data = {
.constraints = {
.name = "VTOUCH_ADVV2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
.consumer_supplies = max8997_ldo15_,
};
static struct regulator_init_data __initdata max8997_ldo16_data = {
.constraints = {
.name = "CAM_SENSOR_IO_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
.consumer_supplies = max8997_ldo16_,
};
static struct regulator_init_data __initdata max8997_ldo18_data = {
.constraints = {
.name = "VTOUCH_VDD2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
.consumer_supplies = max8997_ldo18_,
};
static struct regulator_init_data __initdata max8997_ldo21_data = {
.constraints = {
.name = "VDDQ_M1M2_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck1_data = {
.constraints = {
.name = "VARM_1.2V_C210",
.min_uV = 900000,
.max_uV = 1350000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
.consumer_supplies = max8997_buck1_,
};
static struct regulator_init_data __initdata max8997_buck2_data = {
.constraints = {
.name = "VINT_1.1V_C210",
.min_uV = 900000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
.consumer_supplies = max8997_buck2_,
};
static struct regulator_init_data __initdata max8997_buck3_data = {
.constraints = {
.name = "VG3D_1.1V_C210",
.min_uV = 900000,
.max_uV = 1100000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
.consumer_supplies = max8997_buck3_,
};
static struct regulator_init_data __initdata max8997_buck4_data = {
.constraints = {
.name = "CAM_ISP_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
.consumer_supplies = max8997_buck4_,
};
static struct regulator_init_data __initdata max8997_buck5_data = {
.constraints = {
.name = "VMEM_1.2V_C210",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck6_data = {
.constraints = {
.name = "CAM_AF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
.consumer_supplies = max8997_buck6_,
};
static struct regulator_init_data __initdata max8997_buck7_data = {
.constraints = {
.name = "VCC_SUB_2.0V",
.min_uV = 2000000,
.max_uV = 2000000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_32khz_ap_data = {
.constraints = {
.name = "32KHz AP",
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
.consumer_supplies = max8997_32khz_ap_,
};
static struct regulator_init_data __initdata max8997_32khz_cp_data = {
.constraints = {
.name = "32KHz CP",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_vichg_data = {
.constraints = {
.name = "VICHG",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_esafeout1_data = {
.constraints = {
.name = "SAFEOUT1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
.consumer_supplies = max8997_esafeout1_,
};
static struct regulator_init_data __initdata max8997_esafeout2_data = {
.constraints = {
.name = "SAFEOUT2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
.consumer_supplies = max8997_esafeout2_,
};
static struct regulator_init_data __initdata max8997_charger_cv_data = {
.constraints = {
.name = "CHARGER_CV",
.min_uV = 4200000,
.max_uV = 4200000,
.apply_uV = 1,
},
};
static struct regulator_init_data __initdata max8997_charger_data = {
.constraints = {
.name = "CHARGER",
.min_uA = 200000,
.max_uA = 950000,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_CURRENT,
},
.num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
.consumer_supplies = max8997_charger_,
};
static struct regulator_init_data __initdata max8997_charger_topoff_data = {
.constraints = {
.name = "CHARGER TOPOFF",
.min_uA = 50000,
.max_uA = 200000,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
},
.num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
.consumer_supplies = max8997_chg_toff_,
};
static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
{ MAX8997_LDO1, &max8997_ldo1_data },
{ MAX8997_LDO2, &max8997_ldo2_data },
{ MAX8997_LDO3, &max8997_ldo3_data },
{ MAX8997_LDO4, &max8997_ldo4_data },
{ MAX8997_LDO5, &max8997_ldo5_data },
{ MAX8997_LDO6, &max8997_ldo6_data },
{ MAX8997_LDO7, &max8997_ldo7_data },
{ MAX8997_LDO8, &max8997_ldo8_data },
{ MAX8997_LDO9, &max8997_ldo9_data },
{ MAX8997_LDO10, &max8997_ldo10_data },
{ MAX8997_LDO11, &max8997_ldo11_data },
{ MAX8997_LDO12, &max8997_ldo12_data },
{ MAX8997_LDO13, &max8997_ldo13_data },
{ MAX8997_LDO14, &max8997_ldo14_data },
{ MAX8997_LDO15, &max8997_ldo15_data },
{ MAX8997_LDO16, &max8997_ldo16_data },
{ MAX8997_LDO18, &max8997_ldo18_data },
{ MAX8997_LDO21, &max8997_ldo21_data },
{ MAX8997_BUCK1, &max8997_buck1_data },
{ MAX8997_BUCK2, &max8997_buck2_data },
{ MAX8997_BUCK3, &max8997_buck3_data },
{ MAX8997_BUCK4, &max8997_buck4_data },
{ MAX8997_BUCK5, &max8997_buck5_data },
{ MAX8997_BUCK6, &max8997_buck6_data },
{ MAX8997_BUCK7, &max8997_buck7_data },
{ MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
{ MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
{ MAX8997_ENVICHG, &max8997_vichg_data },
{ MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
{ MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
{ MAX8997_CHARGER_CV, &max8997_charger_cv_data },
{ MAX8997_CHARGER, &max8997_charger_data },
{ MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
};
static struct max8997_platform_data __initdata nuri_max8997_pdata = {
.wakeup = 1,
.num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
.regulators = nuri_max8997_regulators,
.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
.buck1_voltage[0] = 1350000, /* 1.35V */
.buck1_voltage[1] = 1300000, /* 1.3V */
.buck1_voltage[2] = 1250000, /* 1.25V */
.buck1_voltage[3] = 1200000, /* 1.2V */
.buck1_voltage[4] = 1150000, /* 1.15V */
.buck1_voltage[5] = 1100000, /* 1.1V */
.buck1_voltage[6] = 1000000, /* 1.0V */
.buck1_voltage[7] = 950000, /* 0.95V */
.buck2_voltage[0] = 1100000, /* 1.1V */
.buck2_voltage[1] = 1000000, /* 1.0V */
.buck2_voltage[2] = 950000, /* 0.95V */
.buck2_voltage[3] = 900000, /* 0.9V */
.buck2_voltage[4] = 1100000, /* 1.1V */
.buck2_voltage[5] = 1000000, /* 1.0V */
.buck2_voltage[6] = 950000, /* 0.95V */
.buck2_voltage[7] = 900000, /* 0.9V */
.buck5_voltage[0] = 1200000, /* 1.2V */
.buck5_voltage[1] = 1200000, /* 1.2V */
.buck5_voltage[2] = 1200000, /* 1.2V */
.buck5_voltage[3] = 1200000, /* 1.2V */
.buck5_voltage[4] = 1200000, /* 1.2V */
.buck5_voltage[5] = 1200000, /* 1.2V */
.buck5_voltage[6] = 1200000, /* 1.2V */
.buck5_voltage[7] = 1200000, /* 1.2V */
};
/* GPIO I2C 5 (PMIC) */
enum { I2C5_MAX8997 };
static struct i2c_board_info i2c5_devs[] __initdata = {
[I2C5_MAX8997] = {
I2C_BOARD_INFO("max8997", 0xCC >> 1),
.platform_data = &nuri_max8997_pdata,
},
};
static struct max17042_platform_data nuri_battery_platform_data = {
};
/* GPIO I2C 9 (Fuel Gauge) */
static struct i2c_gpio_platform_data i2c9_gpio_data = {
.sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
.scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
};
static struct platform_device i2c9_gpio = {
.name = "i2c-gpio",
.id = 9,
.dev = {
.platform_data = &i2c9_gpio_data,
},
};
enum { I2C9_MAX17042};
static struct i2c_board_info i2c9_devs[] __initdata = {
[I2C9_MAX17042] = {
I2C_BOARD_INFO("max17042", 0x36),
.platform_data = &nuri_battery_platform_data,
},
};
/* MAX8903 Secondary Charger */
static struct regulator_consumer_supply supplies_max8903[] = {
REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
};
static struct regulator_init_data max8903_charger_en_data = {
.constraints = {
.name = "VOUT_CHARGER",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
.consumer_supplies = supplies_max8903,
};
static struct fixed_voltage_config max8903_charger_en = {
.supply_name = "VOUT_CHARGER",
.microvolts = 5000000, /* Assume 5VDC */
.gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
.enable_high = 0, /* Enable = Low */
.enabled_at_boot = 1,
.init_data = &max8903_charger_en_data,
};
static struct platform_device max8903_fixed_reg_dev = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_MAX8903,
.dev = { .platform_data = &max8903_charger_en },
};
static struct max8903_pdata nuri_max8903 = {
/*
* cen: don't control with the driver, let it be
* controlled by regulator above
*/
.dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
/* uok, usus: not connected */
.chg = EXYNOS4_GPE2(0), /* TA_nCHG */
/* flt: vcc_1.8V_pda */
.dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
.dc_valid = true,
.usb_valid = false, /* USB is not wired to MAX8903 */
};
static struct platform_device nuri_max8903_device = {
.name = "max8903-charger",
.dev = {
.platform_data = &nuri_max8903,
},
};
static void __init nuri_power_init(void)
{
int gpio;
int ta_en = 0;
gpio = EXYNOS4_GPX0(7);
gpio_request(gpio, "AP_PMIC_IRQ");
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
gpio = EXYNOS4_GPX2(3);
gpio_request(gpio, "FUEL_ALERT");
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
gpio = nuri_max8903.dok;
gpio_request(gpio, "TA_nCONNECTED");
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
ta_en = gpio_get_value(gpio) ? 0 : 1;
gpio = nuri_max8903.chg;
gpio_request(gpio, "TA_nCHG");
gpio_direction_input(gpio);
gpio = nuri_max8903.dcm;
gpio_request(gpio, "CURR_ADJ");
gpio_direction_output(gpio, ta_en);
}
/* USB EHCI */
static struct s5p_ehci_platdata nuri_ehci_pdata;
static void __init nuri_ehci_init(void)
{
struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
s5p_ehci_set_platdata(pdata);
}
/* USB OTG */
static struct s3c_hsotg_plat nuri_hsotg_pdata;
/* CAMERA */
static struct regulator_consumer_supply cam_vt_cam15_supply =
REGULATOR_SUPPLY("vdd_core", "6-003c");
static struct regulator_init_data cam_vt_cam15_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_vt_cam15_supply,
};
static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
.supply_name = "VT_CAM_1.5V",
.microvolts = 1500000,
.gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
.enable_high = 1,
.init_data = &cam_vt_cam15_reg_init_data,
};
static struct platform_device cam_vt_cam15_fixed_rdev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
.dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
};
static struct regulator_consumer_supply cam_vdda_supply[] = {
REGULATOR_SUPPLY("vdda", "6-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
static struct regulator_init_data cam_vdda_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
.consumer_supplies = cam_vdda_supply,
};
static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
.supply_name = "CAM_IO_EN",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */
.enable_high = 1,
.init_data = &cam_vdda_reg_init_data,
};
static struct platform_device cam_vdda_fixed_rdev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
.dev = { .platform_data = &cam_vdda_fixed_voltage_cfg },
};
static struct regulator_consumer_supply camera_8m_12v_supply =
REGULATOR_SUPPLY("dig_12", "0-001f");
static struct regulator_init_data cam_8m_12v_reg_init_data = {
.num_consumer_supplies = 1,
.consumer_supplies = &camera_8m_12v_supply,
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS
},
};
static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
.supply_name = "8M_1.2V",
.microvolts = 1200000,
.gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
.enable_high = 1,
.init_data = &cam_8m_12v_reg_init_data,
};
static struct platform_device cam_8m_12v_fixed_rdev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
.dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
};
static struct s5p_platform_mipi_csis mipi_csis_platdata = {
.clk_rate = 166000000UL,
.lanes = 2,
.hs_settle = 12,
};
#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0)
#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1)
static struct s5k6aa_platform_data s5k6aa_pldata = {
.mclk_frequency = 24000000UL,
.gpio_reset = { GPIO_CAM_VT_NRST, 0 },
.gpio_stby = { GPIO_CAM_VT_NSTBY, 0 },
.bus_type = V4L2_MBUS_PARALLEL,
.horiz_flip = 1,
};
static struct i2c_board_info s5k6aa_board_info = {
I2C_BOARD_INFO("S5K6AA", 0x3c),
.platform_data = &s5k6aa_pldata,
};
static struct m5mols_platform_data m5mols_platdata = {
.gpio_reset = GPIO_CAM_MEGA_RST,
};
static struct i2c_board_info m5mols_board_info = {
I2C_BOARD_INFO("M5MOLS", 0x1F),
.platform_data = &m5mols_platdata,
};
static struct fimc_source_info nuri_camera_sensors[] = {
{
.flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &s5k6aa_board_info,
.clk_frequency = 24000000UL,
.i2c_bus_num = 6,
}, {
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
.board_info = &m5mols_board_info,
.clk_frequency = 24000000UL,
},
};
static struct s5p_platform_fimc fimc_md_platdata = {
.source_info = nuri_camera_sensors,
.num_clients = ARRAY_SIZE(nuri_camera_sensors),
};
static struct gpio nuri_camera_gpios[] = {
{ GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
{ GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
};
static void __init nuri_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
&s5p_device_mipi_csis0);
s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
&s5p_device_fimc_md);
if (gpio_request_array(nuri_camera_gpios,
ARRAY_SIZE(nuri_camera_gpios))) {
pr_err("%s: GPIO request failed\n", __func__);
return;
}
m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
if (m5mols_board_info.irq >= 0)
s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
else
pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
/* Free GPIOs controlled directly by the sensor drivers. */
gpio_free(GPIO_CAM_VT_NRST);
gpio_free(GPIO_CAM_VT_NSTBY);
gpio_free(GPIO_CAM_MEGA_RST);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
pr_err("%s: Camera port A setup failed\n", __func__);
return;
}
/* Increase drive strength of the sensor clock output */
s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
}
static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
.frequency = 400000U,
.sda_delay = 200,
.bus_num = 6,
};
static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
.frequency = 400000U,
.sda_delay = 200,
};
/* DEVFREQ controlling memory/bus */
static struct platform_device exynos4_bus_devfreq = {
.name = "exynos4210-busfreq",
};
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
&s3c_device_i2c5, /* PMIC should initialize first */
&s3c_device_i2c0,
&s3c_device_i2c6,
&emmc_fixed_voltage,
&s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimd0,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_wdt,
&s3c_device_timer[0],
&s5p_device_ehci,
&s3c_device_i2c3,
&i2c9_gpio,
&s3c_device_adc,
&s5p_device_g2d,
&s5p_device_jpeg,
&s3c_device_rtc,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_fimc_md,
&s3c_device_usb_hsotg,
/* NURI Devices */
&nuri_gpio_keys,
&nuri_lcd_device,
&nuri_backlight_device,
&max8903_fixed_reg_dev,
&nuri_max8903_device,
&cam_vt_cam15_fixed_rdev,
&cam_vdda_fixed_rdev,
&cam_8m_12v_fixed_rdev,
&exynos4_bus_devfreq,
};
static void __init nuri_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
xxti_f = 0;
xusbxti_f = 24000000;
}
static void __init nuri_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
nuri_tsp_init();
nuri_power_init();
s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&nuri_fb_pdata);
#endif
nuri_camera_init();
nuri_ehci_init();
s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
}
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END
arch/arm/mach-exynos/mach-origen.c deleted 100644 → 0
View file @ 383ffda2
/* linux/arch/arm/mach-exynos4/mach-origen.c
*
* Copyright (c) 2011 Insignal Co., Ltd.
* http://www.insignal.co.kr/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_core.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <linux/platform_data/usb-ohci-exynos.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/hdmi.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
};
static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */
};
static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
};
static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
};
static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */
};
static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
};
static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata buck1_consumer[] = {
REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata buck2_consumer[] = {
REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata buck3_consumer[] = {
REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
};
static struct regulator_consumer_supply __initdata buck7_consumer[] = {
REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
};
static struct regulator_init_data __initdata max8997_ldo1_data = {
.constraints = {
.name = "VDD_ABB_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo2_data = {
.constraints = {
.name = "VDD_ALIVE_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo3_data = {
.constraints = {
.name = "VMIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
.consumer_supplies = ldo3_consumer,
};
static struct regulator_init_data __initdata max8997_ldo4_data = {
.constraints = {
.name = "VDD_RTC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo6_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
.consumer_supplies = ldo6_consumer,
};
static struct regulator_init_data __initdata max8997_ldo7_data = {
.constraints = {
.name = "VDD_AUD_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
.consumer_supplies = ldo7_consumer,
};
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
.name = "VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
.consumer_supplies = ldo8_consumer,
};
static struct regulator_init_data __initdata max8997_ldo9_data = {
.constraints = {
.name = "DVDD_SWB_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
.consumer_supplies = ldo9_consumer,
};
static struct regulator_init_data __initdata max8997_ldo10_data = {
.constraints = {
.name = "VDD_PLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo11_data = {
.constraints = {
.name = "VDD_AUD_3V",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
.consumer_supplies = ldo11_consumer,
};
static struct regulator_init_data __initdata max8997_ldo14_data = {
.constraints = {
.name = "AVDD18_SWB_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
.consumer_supplies = ldo14_consumer,
};
static struct regulator_init_data __initdata max8997_ldo17_data = {
.constraints = {
.name = "VDD_SWB_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
.consumer_supplies = ldo17_consumer,
};
static struct regulator_init_data __initdata max8997_ldo21_data = {
.constraints = {
.name = "VDD_MIF_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck1_data = {
.constraints = {
.name = "VDD_ARM_1.2V",
.min_uV = 950000,
.max_uV = 1350000,
.always_on = 1,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
.consumer_supplies = buck1_consumer,
};
static struct regulator_init_data __initdata max8997_buck2_data = {
.constraints = {
.name = "VDD_INT_1.1V",
.min_uV = 900000,
.max_uV = 1100000,
.always_on = 1,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
.consumer_supplies = buck2_consumer,
};
static struct regulator_init_data __initdata max8997_buck3_data = {
.constraints = {
.name = "VDD_G3D_1.1V",
.min_uV = 900000,
.max_uV = 1100000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
.consumer_supplies = buck3_consumer,
};
static struct regulator_init_data __initdata max8997_buck5_data = {
.constraints = {
.name = "VDDQ_M1M2_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck7_data = {
.constraints = {
.name = "VDD_LCD_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.boot_on = 1,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1
},
},
.num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
.consumer_supplies = buck7_consumer,
};
static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
{ MAX8997_LDO1, &max8997_ldo1_data },
{ MAX8997_LDO2, &max8997_ldo2_data },
{ MAX8997_LDO3, &max8997_ldo3_data },
{ MAX8997_LDO4, &max8997_ldo4_data },
{ MAX8997_LDO6, &max8997_ldo6_data },
{ MAX8997_LDO7, &max8997_ldo7_data },
{ MAX8997_LDO8, &max8997_ldo8_data },
{ MAX8997_LDO9, &max8997_ldo9_data },
{ MAX8997_LDO10, &max8997_ldo10_data },
{ MAX8997_LDO11, &max8997_ldo11_data },
{ MAX8997_LDO14, &max8997_ldo14_data },
{ MAX8997_LDO17, &max8997_ldo17_data },
{ MAX8997_LDO21, &max8997_ldo21_data },
{ MAX8997_BUCK1, &max8997_buck1_data },
{ MAX8997_BUCK2, &max8997_buck2_data },
{ MAX8997_BUCK3, &max8997_buck3_data },
{ MAX8997_BUCK5, &max8997_buck5_data },
{ MAX8997_BUCK7, &max8997_buck7_data },
};
static struct max8997_platform_data __initdata origen_max8997_pdata = {
.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
.regulators = origen_max8997_regulators,
.wakeup = true,
.buck1_gpiodvs = false,
.buck2_gpiodvs = false,
.buck5_gpiodvs = false,
.ignore_gpiodvs_side_effect = true,
.buck125_default_idx = 0x0,
.buck125_gpios[0] = EXYNOS4_GPX0(0),
.buck125_gpios[1] = EXYNOS4_GPX0(1),
.buck125_gpios[2] = EXYNOS4_GPX0(2),
.buck1_voltage[0] = 1350000,
.buck1_voltage[1] = 1300000,
.buck1_voltage[2] = 1250000,
.buck1_voltage[3] = 1200000,
.buck1_voltage[4] = 1150000,
.buck1_voltage[5] = 1100000,
.buck1_voltage[6] = 1000000,
.buck1_voltage[7] = 950000,
.buck2_voltage[0] = 1100000,
.buck2_voltage[1] = 1100000,
.buck2_voltage[2] = 1100000,
.buck2_voltage[3] = 1100000,
.buck2_voltage[4] = 1000000,
.buck2_voltage[5] = 1000000,
.buck2_voltage[6] = 1000000,
.buck2_voltage[7] = 1000000,
.buck5_voltage[0] = 1200000,
.buck5_voltage[1] = 1200000,
.buck5_voltage[2] = 1200000,
.buck5_voltage[3] = 1200000,
.buck5_voltage[4] = 1200000,
.buck5_voltage[5] = 1200000,
.buck5_voltage[6] = 1200000,
.buck5_voltage[7] = 1200000,
};
/* I2C0 */
static struct i2c_board_info i2c0_devs[] __initdata = {
{
I2C_BOARD_INFO("max8997", (0xCC >> 1)),
.platform_data = &origen_max8997_pdata,
.irq = IRQ_EINT(4),
},
};
static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
};
static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
};
/* USB EHCI */
static struct s5p_ehci_platdata origen_ehci_pdata;
static void __init origen_ehci_init(void)
{
struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
s5p_ehci_set_platdata(pdata);
}
/* USB OHCI */
static struct exynos4_ohci_platdata origen_ohci_pdata;
static void __init origen_ohci_init(void)
{
struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
exynos4_ohci_set_platdata(pdata);
}
/* USB OTG */
static struct s3c_hsotg_plat origen_hsotg_pdata;
static struct gpio_led origen_gpio_leds[] = {
{
.name = "origen::status1",
.default_trigger = "heartbeat",
.gpio = EXYNOS4_GPX1(3),
.active_low = 1,
},
{
.name = "origen::status2",
.default_trigger = "mmc0",
.gpio = EXYNOS4_GPX1(4),
.active_low = 1,
},
};
static struct gpio_led_platform_data origen_gpio_led_info = {
.leds = origen_gpio_leds,
.num_leds = ARRAY_SIZE(origen_gpio_leds),
};
static struct platform_device origen_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &origen_gpio_led_info,
},
};
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
.gpio = EXYNOS4_GPX1(5),
.desc = "gpio-keys: KEY_MENU",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_HOME,
.gpio = EXYNOS4_GPX1(6),
.desc = "gpio-keys: KEY_HOME",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_BACK,
.gpio = EXYNOS4_GPX1(7),
.desc = "gpio-keys: KEY_BACK",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_UP,
.gpio = EXYNOS4_GPX2(0),
.desc = "gpio-keys: KEY_UP",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_DOWN,
.gpio = EXYNOS4_GPX2(1),
.desc = "gpio-keys: KEY_DOWN",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data origen_gpio_keys_data = {
.buttons = origen_gpio_keys_table,
.nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
};
static struct platform_device origen_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &origen_gpio_keys_data,
},
};
static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
{
int ret;
if (power)
ret = gpio_request_one(EXYNOS4_GPE3(4),
GPIOF_OUT_INIT_HIGH, "GPE3_4");
else
ret = gpio_request_one(EXYNOS4_GPE3(4),
GPIOF_OUT_INIT_LOW, "GPE3_4");
gpio_free(EXYNOS4_GPE3(4));
if (ret)
pr_err("failed to request gpio for LCD power: %d\n", ret);
}
static struct plat_lcd_data origen_lcd_hv070wsa_data = {
.set_power = lcd_hv070wsa_set_power,
};
static struct platform_device origen_lcd_hv070wsa = {
.name = "platform-lcd",
.dev.parent = &s5p_device_fimd0.dev,
.dev.platform_data = &origen_lcd_hv070wsa_data,
};
static struct pwm_lookup origen_pwm_lookup[] = {
PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
};
#ifdef CONFIG_DRM_EXYNOS_FIMD
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.left_margin = 64,
.right_margin = 16,
.upper_margin = 64,
.lower_margin = 16,
.hsync_len = 48,
.vsync_len = 3,
.xres = 1024,
.yres = 600,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
.default_win = 0,
.bpp = 32,
};
#else
static struct s3c_fb_pd_win origen_fb_win0 = {
.xres = 1024,
.yres = 600,
.max_bpp = 32,
.default_bpp = 24,
.virtual_x = 1024,
.virtual_y = 2 * 600,
};
static struct fb_videomode origen_lcd_timing = {
.left_margin = 64,
.right_margin = 16,
.upper_margin = 64,
.lower_margin = 16,
.hsync_len = 48,
.vsync_len = 3,
.xres = 1024,
.yres = 600,
};
static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
.win[0] = &origen_fb_win0,
.vtiming = &origen_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
/* Bluetooth rfkill gpio platform data */
static struct rfkill_gpio_platform_data origen_bt_pdata = {
.reset_gpio = EXYNOS4_GPX2(2),
.shutdown_gpio = -1,
.type = RFKILL_TYPE_BLUETOOTH,
.name = "origen-bt",
};
/* Bluetooth Platform device */
static struct platform_device origen_device_bluetooth = {
.name = "rfkill_gpio",
.id = -1,
.dev = {
.platform_data = &origen_bt_pdata,
},
};
static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc0,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
&s5p_device_fimd0,
&s5p_device_g2d,
&s5p_device_hdmi,
&s5p_device_i2c_hdmiphy,
&s5p_device_jpeg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_mixer,
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
&origen_leds_gpio,
&origen_device_bluetooth,
};
/* LCD Backlight data */
static struct samsung_bl_gpio_info origen_bl_gpio_info = {
.no = EXYNOS4_GPD0(0),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data origen_bl_data = {
.pwm_id = 0,
.pwm_period_ns = 1000,
};
static void __init origen_bt_setup(void)
{
gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
/* 4 UART Pins configuration */
s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
/* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
}
/* I2C module and id for HDMIPHY */
static struct i2c_board_info hdmiphy_info = {
I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
};
static void s5p_tv_setup(void)
{
/* Direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
xxti_f = 0;
xusbxti_f = 24000000;
}
static void __init origen_power_init(void)
{
gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
}
static void __init origen_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init origen_machine_init(void)
{
origen_power_init();
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
/*
* Since sdhci instance 2 can contain a bootable media,
* sdhci instance 0 is registered after instance 2.
*/
s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
origen_ehci_init();
origen_ohci_init();
s3c_hsotg_set_platdata(&origen_hsotg_pdata);
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
#ifdef CONFIG_DRM_EXYNOS_FIMD
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&origen_lcd_pdata);
#endif
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
origen_bt_setup();
}
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
arch/arm/mach-exynos/mach-smdk4x12.c deleted 100644 → 0
View file @ 383ffda2
/*
* linux/arch/arm/mach-exynos4/mach-smdk4x12.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/lcd.h>
#include <linux/mfd/max8997.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
#include <plat/backlight.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
};
static struct regulator_consumer_supply max8997_buck1 =
REGULATOR_SUPPLY("vdd_arm", NULL);
static struct regulator_consumer_supply max8997_buck2 =
REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply max8997_buck3 =
REGULATOR_SUPPLY("vdd_g3d", NULL);
static struct regulator_init_data max8997_buck1_data = {
.constraints = {
.name = "VDD_ARM_SMDK4X12",
.min_uV = 925000,
.max_uV = 1350000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8997_buck1,
};
static struct regulator_init_data max8997_buck2_data = {
.constraints = {
.name = "VDD_INT_SMDK4X12",
.min_uV = 950000,
.max_uV = 1150000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8997_buck2,
};
static struct regulator_init_data max8997_buck3_data = {
.constraints = {
.name = "VDD_G3D_SMDK4X12",
.min_uV = 950000,
.max_uV = 1150000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8997_buck3,
};
static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
{ MAX8997_BUCK1, &max8997_buck1_data },
{ MAX8997_BUCK2, &max8997_buck2_data },
{ MAX8997_BUCK3, &max8997_buck3_data },
};
static struct max8997_platform_data smdk4x12_max8997_pdata = {
.num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
.regulators = smdk4x12_max8997_regulators,
.buck1_voltage[0] = 1100000, /* 1.1V */
.buck1_voltage[1] = 1100000, /* 1.1V */
.buck1_voltage[2] = 1100000, /* 1.1V */
.buck1_voltage[3] = 1100000, /* 1.1V */
.buck1_voltage[4] = 1100000, /* 1.1V */
.buck1_voltage[5] = 1100000, /* 1.1V */
.buck1_voltage[6] = 1000000, /* 1.0V */
.buck1_voltage[7] = 950000, /* 0.95V */
.buck2_voltage[0] = 1100000, /* 1.1V */
.buck2_voltage[1] = 1000000, /* 1.0V */
.buck2_voltage[2] = 950000, /* 0.95V */
.buck2_voltage[3] = 900000, /* 0.9V */
.buck2_voltage[4] = 1100000, /* 1.1V */
.buck2_voltage[5] = 1000000, /* 1.0V */
.buck2_voltage[6] = 950000, /* 0.95V */
.buck2_voltage[7] = 900000, /* 0.9V */
.buck5_voltage[0] = 1100000, /* 1.1V */
.buck5_voltage[1] = 1100000, /* 1.1V */
.buck5_voltage[2] = 1100000, /* 1.1V */
.buck5_voltage[3] = 1100000, /* 1.1V */
.buck5_voltage[4] = 1100000, /* 1.1V */
.buck5_voltage[5] = 1100000, /* 1.1V */
.buck5_voltage[6] = 1100000, /* 1.1V */
.buck5_voltage[7] = 1100000, /* 1.1V */
};
static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
{
I2C_BOARD_INFO("max8997", 0x66),
.platform_data = &smdk4x12_max8997_pdata,
}
};
static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8994", 0x1a), }
};
static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
/* nothing here yet */
};
static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
/* nothing here yet */
};
static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
.no = EXYNOS4_GPD0(1),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdk4x12_bl_data = {
.pwm_id = 1,
.pwm_period_ns = 1000,
};
static struct pwm_lookup smdk4x12_pwm_lookup[] = {
PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
};
static uint32_t smdk4x12_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
};
static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
.keymap = smdk4x12_keymap,
.keymap_size = ARRAY_SIZE(smdk4x12_keymap),
};
static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
.keymap_data = &smdk4x12_keymap_data,
.rows = 3,
.cols = 8,
};
#ifdef CONFIG_DRM_EXYNOS_FIMD
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.left_margin = 8,
.right_margin = 8,
.upper_margin = 6,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 4,
.xres = 480,
.yres = 800,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.default_win = 0,
.bpp = 32,
};
#else
static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
.xres = 480,
.yres = 800,
.virtual_x = 480,
.virtual_y = 800 * 2,
.max_bpp = 32,
.default_bpp = 24,
};
static struct fb_videomode smdk4x12_lcd_timing = {
.left_margin = 8,
.right_margin = 8,
.upper_margin = 6,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 4,
.xres = 480,
.yres = 800,
};
static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
.win[0] = &smdk4x12_fb_win0,
.vtiming = &smdk4x12_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
/* USB OTG */
static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_i2c3,
&s3c_device_i2c7,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
&s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&samsung_device_keypad,
};
static void __init smdk4x12_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
static void __init smdk4x12_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init smdk4x12_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, smdk4x12_i2c_devs0,
ARRAY_SIZE(smdk4x12_i2c_devs0));
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(1, smdk4x12_i2c_devs1,
ARRAY_SIZE(smdk4x12_i2c_devs1));
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, smdk4x12_i2c_devs3,
ARRAY_SIZE(smdk4x12_i2c_devs3));
s3c_i2c7_set_platdata(NULL);
i2c_register_board_info(7, smdk4x12_i2c_devs7,
ARRAY_SIZE(smdk4x12_i2c_devs7));
samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
samsung_keypad_set_platdata(&smdk4x12_keypad_data);
s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
#ifdef CONFIG_DRM_EXYNOS_FIMD
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
#endif
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
MACHINE_START(SMDK4212, "SMDK4212")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
MACHINE_START(SMDK4412, "SMDK4412")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
arch/arm/mach-exynos/mach-smdkv310.c deleted 100644 → 0
View file @ 383ffda2
/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <linux/platform_data/usb-ohci-exynos.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = SMDKV310_UCON_DEFAULT,
.ulcon = SMDKV310_ULCON_DEFAULT,
.ufcon = SMDKV310_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = SMDKV310_UCON_DEFAULT,
.ulcon = SMDKV310_ULCON_DEFAULT,
.ufcon = SMDKV310_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = SMDKV310_UCON_DEFAULT,
.ulcon = SMDKV310_ULCON_DEFAULT,
.ufcon = SMDKV310_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = SMDKV310_UCON_DEFAULT,
.ulcon = SMDKV310_ULCON_DEFAULT,
.ufcon = SMDKV310_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = EXYNOS4_GPK0(2),
.ext_cd_gpio_invert = 1,
};
static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = EXYNOS4_GPK2(2),
.ext_cd_gpio_invert = 1,
};
static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
gpio_free(EXYNOS4_GPD0(1));
#endif
/* fire nRESET on power up */
gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
mdelay(100);
gpio_set_value(EXYNOS4_GPX0(6), 0);
mdelay(10);
gpio_set_value(EXYNOS4_GPX0(6), 1);
mdelay(10);
gpio_free(EXYNOS4_GPX0(6));
} else {
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
gpio_free(EXYNOS4_GPD0(1));
#endif
}
}
static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
.set_power = lcd_lte480wv_set_power,
};
static struct platform_device smdkv310_lcd_lte480wv = {
.name = "platform-lcd",
.dev.parent = &s5p_device_fimd0.dev,
.dev.platform_data = &smdkv310_lcd_lte480wv_data,
};
#ifdef CONFIG_DRM_EXYNOS_FIMD
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.left_margin = 13,
.right_margin = 8,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.default_win = 0,
.bpp = 32,
};
#else
static struct s3c_fb_pd_win smdkv310_fb_win0 = {
.max_bpp = 32,
.default_bpp = 24,
.xres = 800,
.yres = 480,
};
static struct fb_videomode smdkv310_lcd_timing = {
.left_margin = 13,
.right_margin = 8,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
.win[0] = &smdkv310_fb_win0,
.vtiming = &smdkv310_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
static struct resource smdkv310_smsc911x_resources[] = {
[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
[1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
| IRQF_TRIGGER_LOW),
};
static struct smsc911x_platform_config smsc9215_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};
static struct platform_device smdkv310_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
.resource = smdkv310_smsc911x_resources,
.dev = {
.platform_data = &smsc9215_config,
},
};
static uint32_t smdkv310_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
.keymap = smdkv310_keymap,
.keymap_size = ARRAY_SIZE(smdkv310_keymap),
};
static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
.keymap_data = &smdkv310_keymap_data,
.rows = 2,
.cols = 8,
};
static struct i2c_board_info i2c_devs1[] __initdata = {
{I2C_BOARD_INFO("wm8994", 0x1a),},
};
/* USB EHCI */
static struct s5p_ehci_platdata smdkv310_ehci_pdata;
static void __init smdkv310_ehci_init(void)
{
struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
s5p_ehci_set_platdata(pdata);
}
/* USB OHCI */
static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
static void __init smdkv310_ohci_init(void)
{
struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
exynos4_ohci_set_platdata(pdata);
}
/* USB OTG */
static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
/* Audio device */
static struct platform_device smdkv310_device_audio = {
.name = "smdk-audio",
.id = -1,
};
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c1,
&s5p_device_i2c_hdmiphy,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
&s5p_device_g2d,
&s5p_device_jpeg,
&exynos4_device_ac97,
&exynos4_device_i2s0,
&exynos4_device_ohci,
&samsung_device_keypad,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_spdif,
&samsung_asoc_idma,
&s5p_device_fimd0,
&smdkv310_device_audio,
&smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
&s5p_device_hdmi,
&s5p_device_mixer,
};
static void __init smdkv310_smsc911x_init(void)
{
u32 cs1;
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S5P_SROM_BW) &
~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
S5P_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S5P_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
(0x9 << S5P_SROM_BCX__TACP__SHIFT) |
(0xc << S5P_SROM_BCX__TCAH__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
(0x6 << S5P_SROM_BCX__TACC__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
.no = EXYNOS4_GPD0(1),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdkv310_bl_data = {
.pwm_id = 1,
.pwm_period_ns = 1000,
};
/* I2C module and id for HDMIPHY */
static struct i2c_board_info hdmiphy_info = {
I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
};
static struct pwm_lookup smdkv310_pwm_lookup[] = {
PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
};
static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
xxti_f = 12000000;
xusbxti_f = 24000000;
}
static void __init smdkv310_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init smdkv310_machine_init(void)
{
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
smdkv310_smsc911x_init();
s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
#ifdef CONFIG_DRM_EXYNOS_FIMD
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
#endif
smdkv310_ehci_init();
smdkv310_ohci_init();
s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
MACHINE_START(SMDKV310, "SMDKV310")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
arch/arm/mach-exynos/mach-universal_c210.c deleted 100644 → 0
View file @ 383ffda2
/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/max8952.h>
#include <linux/mmc/host.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/mcs.h>
#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <drm/exynos_drm.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
#include <mach/map.h>
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
#include <media/s5k6aa.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG256 | \
S5PV210_UFCON_RXTRIG256)
static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
};
static struct regulator_consumer_supply max8952_consumer =
REGULATOR_SUPPLY("vdd_arm", NULL);
static struct regulator_init_data universal_max8952_reg_data = {
.constraints = {
.name = "VARM_1.2V",
.min_uV = 770000,
.max_uV = 1400000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.boot_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8952_consumer,
};
static struct max8952_platform_data universal_max8952_pdata __initdata = {
.gpio_vid0 = EXYNOS4_GPX0(3),
.gpio_vid1 = EXYNOS4_GPX0(4),
.gpio_en = -1, /* Not controllable, set "Always High" */
.default_mode = 0, /* vid0 = 0, vid1 = 0 */
.dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
.sync_freq = 0, /* default: fastest */
.ramp_speed = 0, /* default: fastest */
.reg_data = &universal_max8952_reg_data,
};
static struct regulator_consumer_supply lp3974_buck1_consumer =
REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
REGULATOR_SUPPLY("vdet", "s5p-sdo"),
REGULATOR_SUPPLY("vdd_reg", "0-003c"),
};
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
.name = "VINT_1.1V",
.min_uV = 750000,
.max_uV = 1500000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck1_consumer,
};
static struct regulator_init_data lp3974_buck2_data = {
.constraints = {
.name = "VG3D_1.1V",
.min_uV = 750000,
.max_uV = 1500000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck2_consumer,
};
static struct regulator_init_data lp3974_buck3_data = {
.constraints = {
.name = "VCC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
.consumer_supplies = lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
.constraints = {
.name = "VMEM_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo2_data = {
.constraints = {
.name = "VALIVE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
};
static struct regulator_init_data lp3974_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
.consumer_supplies = lp3974_ldo3_consumer,
};
static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
};
static struct regulator_init_data lp3974_ldo4_data = {
.constraints = {
.name = "VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
.consumer_supplies = lp3974_ldo4_consumer,
};
static struct regulator_init_data lp3974_ldo5_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo6_data = {
.constraints = {
.name = "LDO6",
.min_uV = 2000000,
.max_uV = 2000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
};
static struct regulator_init_data lp3974_ldo7_data = {
.constraints = {
.name = "VLCD+VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
.consumer_supplies = lp3974_ldo7_consumer,
};
static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_init_data lp3974_ldo8_data = {
.constraints = {
.name = "VUSB+VDAC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
.consumer_supplies = lp3974_ldo8_consumer,
};
static struct regulator_consumer_supply lp3974_ldo9_consumer =
REGULATOR_SUPPLY("vddio", "0-003c");
static struct regulator_init_data lp3974_ldo9_data = {
.constraints = {
.name = "VCC_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo9_consumer,
};
static struct regulator_init_data lp3974_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.boot_on = 1,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo11_consumer =
REGULATOR_SUPPLY("dig_28", "0-001f");
static struct regulator_init_data lp3974_ldo11_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo11_consumer,
};
static struct regulator_init_data lp3974_ldo12_data = {
.constraints = {
.name = "PS_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo13_data = {
.constraints = {
.name = "VHIC_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo14_consumer =
REGULATOR_SUPPLY("dig_18", "0-001f");
static struct regulator_init_data lp3974_ldo14_data = {
.constraints = {
.name = "CAM_I_HOST_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo14_consumer,
};
static struct regulator_consumer_supply lp3974_ldo15_consumer =
REGULATOR_SUPPLY("dig_12", "0-001f");
static struct regulator_init_data lp3974_ldo15_data = {
.constraints = {
.name = "CAM_S_DIG+FM33_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo15_consumer,
};
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
REGULATOR_SUPPLY("vdda", "0-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
static struct regulator_init_data lp3974_ldo16_data = {
.constraints = {
.name = "CAM_S_ANA_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
.consumer_supplies = lp3974_ldo16_consumer,
};
static struct regulator_init_data lp3974_ldo17_data = {
.constraints = {
.name = "VCC_3.0V_LCD",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_32khz_ap_data = {
.constraints = {
.name = "32KHz AP",
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_32khz_cp_data = {
.constraints = {
.name = "32KHz CP",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_vichg_data = {
.constraints = {
.name = "VICHG",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_esafeout1_data = {
.constraints = {
.name = "SAFEOUT1",
.min_uV = 4800000,
.max_uV = 4800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_esafeout2_data = {
.constraints = {
.name = "SAFEOUT2",
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.enabled = 1,
},
},
};
static struct max8998_regulator_data lp3974_regulators[] = {
{ MAX8998_LDO2, &lp3974_ldo2_data },
{ MAX8998_LDO3, &lp3974_ldo3_data },
{ MAX8998_LDO4, &lp3974_ldo4_data },
{ MAX8998_LDO5, &lp3974_ldo5_data },
{ MAX8998_LDO6, &lp3974_ldo6_data },
{ MAX8998_LDO7, &lp3974_ldo7_data },
{ MAX8998_LDO8, &lp3974_ldo8_data },
{ MAX8998_LDO9, &lp3974_ldo9_data },
{ MAX8998_LDO10, &lp3974_ldo10_data },
{ MAX8998_LDO11, &lp3974_ldo11_data },
{ MAX8998_LDO12, &lp3974_ldo12_data },
{ MAX8998_LDO13, &lp3974_ldo13_data },
{ MAX8998_LDO14, &lp3974_ldo14_data },
{ MAX8998_LDO15, &lp3974_ldo15_data },
{ MAX8998_LDO16, &lp3974_ldo16_data },
{ MAX8998_LDO17, &lp3974_ldo17_data },
{ MAX8998_BUCK1, &lp3974_buck1_data },
{ MAX8998_BUCK2, &lp3974_buck2_data },
{ MAX8998_BUCK3, &lp3974_buck3_data },
{ MAX8998_BUCK4, &lp3974_buck4_data },
{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
{ MAX8998_ENVICHG, &lp3974_vichg_data },
{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
};
static struct max8998_platform_data universal_lp3974_pdata = {
.num_regulators = ARRAY_SIZE(lp3974_regulators),
.regulators = lp3974_regulators,
.buck1_voltage1 = 1100000, /* INT */
.buck1_voltage2 = 1000000,
.buck1_voltage3 = 1100000,
.buck1_voltage4 = 1000000,
.buck1_set1 = EXYNOS4_GPX0(5),
.buck1_set2 = EXYNOS4_GPX0(6),
.buck2_voltage1 = 1200000, /* G3D */
.buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
.buck2_set3 = EXYNOS4_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
};
enum fixed_regulator_id {
FIXED_REG_ID_MMC0,
FIXED_REG_ID_HDMI_5V,
FIXED_REG_ID_CAM_S_IF,
FIXED_REG_ID_CAM_I_CORE,
FIXED_REG_ID_CAM_VT_DIO,
};
static struct regulator_consumer_supply hdmi_fixed_consumer =
REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
static struct regulator_init_data hdmi_fixed_voltage_init_data = {
.constraints = {
.name = "HDMI_5V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &hdmi_fixed_consumer,
};
static struct fixed_voltage_config hdmi_fixed_voltage_config = {
.supply_name = "HDMI_EN1",
.microvolts = 5000000,
.gpio = EXYNOS4_GPE0(1),
.enable_high = true,
.init_data = &hdmi_fixed_voltage_init_data,
};
static struct platform_device hdmi_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_HDMI_5V,
.dev = {
.platform_data = &hdmi_fixed_voltage_config,
},
};
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
I2C_BOARD_INFO("max8952", 0xC0 >> 1),
.platform_data = &universal_max8952_pdata,
}, {
I2C_BOARD_INFO("lp3974", 0xCC >> 1),
.platform_data = &universal_lp3974_pdata,
},
};
/* I2C3 (TSP) */
static struct mxt_platform_data qt602240_platform_data = {
.x_line = 19,
.y_line = 11,
.x_size = 800,
.y_size = 480,
.blen = 0x11,
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
static struct i2c_board_info i2c3_devs[] __initdata = {
{
I2C_BOARD_INFO("qt602240_ts", 0x4a),
.platform_data = &qt602240_platform_data,
},
};
static void __init universal_tsp_init(void)
{
int gpio;
/* TSP_LDO_ON: XMDMADDR_11 */
gpio = EXYNOS4_GPE2(3);
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
/* TSP_INT: XMDMADDR_7 */
gpio = EXYNOS4_GPE1(7);
gpio_request(gpio, "TSP_INT");
s5p_register_gpio_interrupt(gpio);
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
i2c3_devs[0].irq = gpio_to_irq(gpio);
}
/* GPIO I2C 12 (3 Touchkey) */
static uint32_t touchkey_keymap[] = {
/* MCS_KEY_MAP(value, keycode) */
MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
};
static struct mcs_platform_data touchkey_data = {
.keymap = touchkey_keymap,
.keymap_size = ARRAY_SIZE(touchkey_keymap),
.key_maxval = 2,
};
/* GPIO I2C 3_TOUCH 2.8V */
#define I2C_GPIO_BUS_12 12
static struct i2c_gpio_platform_data i2c_gpio12_data = {
.sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
.scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
};
static struct platform_device i2c_gpio12 = {
.name = "i2c-gpio",
.id = I2C_GPIO_BUS_12,
.dev = {
.platform_data = &i2c_gpio12_data,
},
};
static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
{
I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
.platform_data = &touchkey_data,
},
};
static void __init universal_touchkey_init(void)
{
int gpio;
gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
gpio_request(gpio, "3_TOUCH_INT");
s5p_register_gpio_interrupt(gpio);
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
}
static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
.frequency = 300 * 1000,
.sda_delay = 200,
};
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
.code = KEY_VOLUMEUP,
.gpio = EXYNOS4_GPX2(0), /* XEINT16 */
.desc = "gpio-keys: KEY_VOLUMEUP",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_VOLUMEDOWN,
.gpio = EXYNOS4_GPX2(1), /* XEINT17 */
.desc = "gpio-keys: KEY_VOLUMEDOWN",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_CONFIG,
.gpio = EXYNOS4_GPX2(2), /* XEINT18 */
.desc = "gpio-keys: KEY_CONFIG",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_CAMERA,
.gpio = EXYNOS4_GPX2(3), /* XEINT19 */
.desc = "gpio-keys: KEY_CAMERA",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_OK,
.gpio = EXYNOS4_GPX3(5), /* XEINT29 */
.desc = "gpio-keys: KEY_OK",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data universal_gpio_keys_data = {
.buttons = universal_gpio_keys_tables,
.nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
};
static struct platform_device universal_gpio_keys = {
.name = "gpio-keys",
.dev = {
.platform_data = &universal_gpio_keys_data,
},
};
/* eMMC */
static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct regulator_consumer_supply mmc0_supplies[] = {
REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
};
static struct regulator_init_data mmc0_fixed_voltage_init_data = {
.constraints = {
.name = "VMEM_VDD_2.8V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
.consumer_supplies = mmc0_supplies,
};
static struct fixed_voltage_config mmc0_fixed_voltage_config = {
.supply_name = "MASSMEMORY_EN",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE1(3),
.enable_high = true,
.init_data = &mmc0_fixed_voltage_init_data,
};
static struct platform_device mmc0_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_MMC0,
.dev = {
.platform_data = &mmc0_fixed_voltage_config,
},
};
/* SD */
static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
.ext_cd_gpio_invert = 1,
.cd_type = S3C_SDHCI_CD_GPIO,
};
/* WiFi */
static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
};
static void __init universal_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
#ifdef CONFIG_DRM_EXYNOS
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.left_margin = 16,
.right_margin = 16,
.upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.default_win = 3,
.bpp = 32,
};
#else
/* Frame Buffer */
static struct s3c_fb_pd_win universal_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 800,
.virtual_x = 480,
.virtual_y = 2 * 800,
};
static struct fb_videomode universal_lcd_timing = {
.left_margin = 16,
.right_margin = 16,
.upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
};
static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
.win[0] = &universal_fb_win0,
.vtiming = &universal_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
static struct regulator_consumer_supply cam_vt_dio_supply =
REGULATOR_SUPPLY("vdd_core", "0-003c");
static struct regulator_init_data cam_vt_dio_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_vt_dio_supply,
};
static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
.supply_name = "CAM_VT_D_IO",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
.enable_high = 1,
.init_data = &cam_vt_dio_reg_init_data,
};
static struct platform_device cam_vt_dio_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
.dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
};
static struct regulator_consumer_supply cam_i_core_supply =
REGULATOR_SUPPLY("core", "0-001f");
static struct regulator_init_data cam_i_core_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_i_core_supply,
};
static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
.supply_name = "CAM_I_CORE_1.2V",
.microvolts = 1200000,
.gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
.enable_high = 1,
.init_data = &cam_i_core_reg_init_data,
};
static struct platform_device cam_i_core_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
.dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
};
static struct regulator_consumer_supply cam_s_if_supply =
REGULATOR_SUPPLY("d_sensor", "0-001f");
static struct regulator_init_data cam_s_if_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_s_if_supply,
};
static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
.supply_name = "CAM_S_IF_1.8V",
.microvolts = 1800000,
.gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
.enable_high = 1,
.init_data = &cam_s_if_reg_init_data,
};
static struct platform_device cam_s_if_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
.dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
};
static struct s5p_platform_mipi_csis mipi_csis_platdata = {
.clk_rate = 166000000UL,
.lanes = 2,
.hs_settle = 12,
};
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
static int s5k6aa_set_power(int on)
{
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
return 0;
}
static struct s5k6aa_platform_data s5k6aa_platdata = {
.mclk_frequency = 21600000UL,
.gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
.gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
.bus_type = V4L2_MBUS_PARALLEL,
.horiz_flip = 1,
.set_power = s5k6aa_set_power,
};
static struct i2c_board_info s5k6aa_board_info = {
I2C_BOARD_INFO("S5K6AA", 0x3C),
.platform_data = &s5k6aa_platdata,
};
static int m5mols_set_power(struct device *dev, int on)
{
gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
return 0;
}
static struct m5mols_platform_data m5mols_platdata = {
.gpio_reset = GPIO_CAM_MEGA_nRST,
.reset_polarity = 0,
.set_power = m5mols_set_power,
};
static struct i2c_board_info m5mols_board_info = {
I2C_BOARD_INFO("M5MOLS", 0x1F),
.platform_data = &m5mols_platdata,
};
static struct fimc_source_info universal_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &s5k6aa_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
}, {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
},
};
static struct s5p_platform_fimc fimc_md_platdata = {
.source_info = universal_camera_sensors,
.num_clients = ARRAY_SIZE(universal_camera_sensors),
};
static struct gpio universal_camera_gpios[] = {
{ GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
{ GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
{ GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
};
/* USB OTG */
static struct s3c_hsotg_plat universal_hsotg_pdata;
static void __init universal_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
&s5p_device_mipi_csis0);
s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
&s5p_device_fimc_md);
if (gpio_request_array(universal_camera_gpios,
ARRAY_SIZE(universal_camera_gpios))) {
pr_err("%s: GPIO request failed\n", __func__);
return;
}
if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
else
pr_err("Failed to configure 8M_ISP_INT GPIO\n");
/* Free GPIOs controlled directly by the sensor drivers. */
gpio_free(GPIO_CAM_MEGA_nRST);
gpio_free(GPIO_CAM_8M_ISP_INT);
gpio_free(GPIO_CAM_VGA_NRST);
gpio_free(GPIO_CAM_VGA_NSTBY);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
pr_err("Camera port A setup failed\n");
}
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
&s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_g2d,
&mmc0_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c0,
&s3c_device_i2c3,
&s3c_device_i2c5,
&s5p_device_i2c_hdmiphy,
&hdmi_fixed_voltage,
&s5p_device_hdmi,
&s5p_device_sdo,
&s5p_device_mixer,
/* Universal Devices */
&i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
&s5p_device_fimd0,
&s5p_device_jpeg,
&s3c_device_usb_hsotg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&cam_vt_dio_fixed_reg_dev,
&cam_i_core_fixed_reg_dev,
&cam_s_if_fixed_reg_dev,
&s5p_device_fimc_md,
};
static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
exynos_set_timer_source(BIT(2) | BIT(4));
xxti_f = 0;
xusbxti_f = 24000000;
}
static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}
static void __init universal_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init universal_machine_init(void)
{
universal_sdhci_init();
s5p_tv_setup();
s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&universal_lcd_pdata);
#endif
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
s3c_hsotg_set_platdata(&universal_hsotg_pdata);
universal_camera_init();
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7