Commit ce6288cc authored by Eryu Guan's avatar Eryu Guan Committed by Luis Henriques

ext4: don't read blocks from disk after extents being swapped

commit bcff2488 upstream.

I notice ext4/307 fails occasionally on ppc64 host, reporting md5
checksum mismatch after moving data from original file to donor file.

The reason is that move_extent_per_page() calls __block_write_begin()
and block_commit_write() to write saved data from original inode blocks
to donor inode blocks, but __block_write_begin() not only maps buffer
heads but also reads block content from disk if the size is not block
size aligned.  At this time the physical block number in mapped buffer
head is pointing to the donor file not the original file, and that
results in reading wrong data to page, which get written to disk in
following block_commit_write call.

This also can be reproduced by the following script on 1k block size ext4
on x86_64 host:

    mnt=/mnt/ext4
    donorfile=$mnt/donor
    testfile=$mnt/testfile
    e4compact=~/xfstests/src/e4compact

    rm -f $donorfile $testfile

    # reserve space for donor file, written by 0xaa and sync to disk to
    # avoid EBUSY on EXT4_IOC_MOVE_EXT
    xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile

    # create test file written by 0xbb
    xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile

    # compute initial md5sum
    md5sum $testfile | tee md5sum.txt
    # drop cache, force e4compact to read data from disk
    echo 3 > /proc/sys/vm/drop_caches

    # test defrag
    echo "$testfile" | $e4compact -i -v -f $donorfile
    # check md5sum
    md5sum -c md5sum.txt

Fix it by creating & mapping buffer heads only but not reading blocks
from disk, because all the data in page is guaranteed to be up-to-date
in mext_page_mkuptodate().
Signed-off-by: default avatarEryu Guan <guaneryu@gmail.com>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent 3d7f36db
......@@ -915,10 +915,11 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
unsigned long blocksize = orig_inode->i_sb->s_blocksize;
unsigned int w_flags = 0;
unsigned int tmp_data_size, data_size, replaced_size;
int err2, jblocks, retries = 0;
int i, err2, jblocks, retries = 0;
int replaced_count = 0;
int from = data_offset_in_page << orig_inode->i_blkbits;
int blocks_per_page = PAGE_CACHE_SIZE >> orig_inode->i_blkbits;
struct buffer_head *bh = NULL;
/*
* It needs twice the amount of ordinary journal buffers because
......@@ -1027,8 +1028,16 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
}
/* Perform all necessary steps similar write_begin()/write_end()
* but keeping in mind that i_size will not change */
*err = __block_write_begin(pagep[0], from, replaced_size,
ext4_get_block);
if (!page_has_buffers(pagep[0]))
create_empty_buffers(pagep[0], 1 << orig_inode->i_blkbits, 0);
bh = page_buffers(pagep[0]);
for (i = 0; i < data_offset_in_page; i++)
bh = bh->b_this_page;
for (i = 0; i < block_len_in_page; i++) {
*err = ext4_get_block(orig_inode, orig_blk_offset + i, bh, 0);
if (*err < 0)
break;
}
if (!*err)
*err = block_commit_write(pagep[0], from, from + replaced_size);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment