ARM: dts: rcar-gen2: Add reset control properties for display

Add reset control properties to the device nodes for the Display Units
on all supported R-Car Gen2 SoCs.  Note that on these SoCs, there is
only a single reset for all DU channels.

Join the clocks lines while at it, to increase uniformity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200218133019.22299-2-geert+renesas@glider.be

arch/arm/boot/dts/r8a7790.dtsi

@@ -1719,6 +1719,8 @@ du: display@feb00000 {
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {

arch/arm/boot/dts/r8a7791.dtsi

@@ -1681,9 +1681,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {

arch/arm/boot/dts/r8a7792.dtsi

@@ -852,9 +852,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {

arch/arm/boot/dts/r8a7793.dtsi

@@ -1341,9 +1341,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {

arch/arm/boot/dts/r8a7794.dtsi

@@ -1356,6 +1356,8 @@ du: display@feb00000 {
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {