Merge tag 'regulator-fix-v6.5-rc6' of...

Merge tag 'regulator-fix-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two small driver specific fixes: one incorrect definition for one of
  the Qualcomm regulators and better handling of poorly formed DTs in
  the DA9063 driver"

* tag 'regulator-fix-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix LDO 12 regulator for PM8550
  regulator: da9063: better fix null deref with partial DT

drivers/regulator/da9063-regulator.c

@@ -778,9 +778,6 @@ static int da9063_check_xvp_constraints(struct regulator_config *config)
 	const struct notification_limit *uv_l = &constr->under_voltage_limits;
 	const struct notification_limit *ov_l = &constr->over_voltage_limits;
 
-	if (!config->init_data) /* No config in DT, pointers will be invalid */
-		return 0;
-
 	/* make sure that only one severity is used to clarify if unchanged, enabled or disabled */
 	if ((!!uv_l->prot + !!uv_l->err + !!uv_l->warn) > 1) {
 		dev_err(config->dev, "%s: at most one voltage monitoring severity allowed!\n",
@@ -1031,9 +1028,12 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 			config.of_node = da9063_reg_matches[id].of_node;
 		config.regmap = da9063->regmap;
 
+		/* Checking constraints requires init_data from DT. */
+		if (config.init_data) {
 			ret = da9063_check_xvp_constraints(&config);
 			if (ret)
 				return ret;
+		}
 
 		regl->rdev = devm_regulator_register(&pdev->dev, &regl->desc,
 						     &config);

drivers/regulator/qcom-rpmh-regulator.c

@@ -1068,7 +1068,7 @@ static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
 	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,    "vdd-l8-l9"),
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo515,    "vdd-l1-l4-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo515,    "vdd-l11"),
-	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo,    "vdd-l12"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_nldo515,    "vdd-l12"),
 	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,    "vdd-l2-l13-l14"),
 	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo,    "vdd-l2-l13-l14"),
 	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_nldo515,    "vdd-l15"),