Commit d61e4038 authored by Joe Perches's avatar Joe Perches Committed by David S. Miller

drivers/net: Use octal not symbolic permissions

Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Reviewed-by: default avatarWei Liu <wei.liu2@citrix.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d6444062
......@@ -287,7 +287,7 @@ void bond_create_proc_entry(struct bonding *bond)
if (bn->proc_dir) {
bond->proc_entry = proc_create_data(bond_dev->name,
S_IRUGO, bn->proc_dir,
0444, bn->proc_dir,
&bond_info_fops, bond);
if (bond->proc_entry == NULL)
netdev_warn(bond_dev, "Cannot create /proc/net/%s/%s\n",
......
This diff is collapsed.
......@@ -26,7 +26,7 @@ const struct slave_attribute slave_attr_##_name = { \
.show = _show, \
};
#define SLAVE_ATTR_RO(_name) \
SLAVE_ATTR(_name, S_IRUGO, _name##_show)
SLAVE_ATTR(_name, 0444, _name##_show)
static ssize_t state_show(struct slave *slave, char *buf)
{
......
......@@ -40,20 +40,20 @@ static LIST_HEAD(ser_list);
static LIST_HEAD(ser_release_list);
static bool ser_loop;
module_param(ser_loop, bool, S_IRUGO);
module_param(ser_loop, bool, 0444);
MODULE_PARM_DESC(ser_loop, "Run in simulated loopback mode.");
static bool ser_use_stx = true;
module_param(ser_use_stx, bool, S_IRUGO);
module_param(ser_use_stx, bool, 0444);
MODULE_PARM_DESC(ser_use_stx, "STX enabled or not.");
static bool ser_use_fcs = true;
module_param(ser_use_fcs, bool, S_IRUGO);
module_param(ser_use_fcs, bool, 0444);
MODULE_PARM_DESC(ser_use_fcs, "FCS enabled or not.");
static int ser_write_chunk = MAX_WRITE_CHUNK;
module_param(ser_write_chunk, int, S_IRUGO);
module_param(ser_write_chunk, int, 0444);
MODULE_PARM_DESC(ser_write_chunk, "Maximum size of data written to UART.");
......@@ -97,19 +97,19 @@ static inline void debugfs_init(struct ser_device *ser, struct tty_struct *tty)
ser->debugfs_tty_dir =
debugfs_create_dir(tty->name, debugfsdir);
if (!IS_ERR(ser->debugfs_tty_dir)) {
debugfs_create_blob("last_tx_msg", S_IRUSR,
debugfs_create_blob("last_tx_msg", 0400,
ser->debugfs_tty_dir,
&ser->tx_blob);
debugfs_create_blob("last_rx_msg", S_IRUSR,
debugfs_create_blob("last_rx_msg", 0400,
ser->debugfs_tty_dir,
&ser->rx_blob);
debugfs_create_x32("ser_state", S_IRUSR,
debugfs_create_x32("ser_state", 0400,
ser->debugfs_tty_dir,
(u32 *)&ser->state);
debugfs_create_x8("tty_status", S_IRUSR,
debugfs_create_x8("tty_status", 0400,
ser->debugfs_tty_dir,
&ser->tty_status);
......
......@@ -35,27 +35,27 @@ MODULE_DESCRIPTION("CAIF SPI driver");
#define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
static bool spi_loop;
module_param(spi_loop, bool, S_IRUGO);
module_param(spi_loop, bool, 0444);
MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
/* SPI frame alignment. */
module_param(spi_frm_align, int, S_IRUGO);
module_param(spi_frm_align, int, 0444);
MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment.");
/*
* SPI padding options.
* Warning: must be a base of 2 (& operation used) and can not be zero !
*/
module_param(spi_up_head_align, int, S_IRUGO);
module_param(spi_up_head_align, int, 0444);
MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment.");
module_param(spi_up_tail_align, int, S_IRUGO);
module_param(spi_up_tail_align, int, 0444);
MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment.");
module_param(spi_down_head_align, int, S_IRUGO);
module_param(spi_down_head_align, int, 0444);
MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment.");
module_param(spi_down_tail_align, int, S_IRUGO);
module_param(spi_down_tail_align, int, 0444);
MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment.");
#ifdef CONFIG_ARM
......@@ -250,10 +250,10 @@ static const struct file_operations dbgfs_frame_fops = {
static inline void dev_debugfs_add(struct cfspi *cfspi)
{
cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root);
cfspi->dbgfs_state = debugfs_create_file("state", S_IRUGO,
cfspi->dbgfs_state = debugfs_create_file("state", 0444,
cfspi->dbgfs_dir, cfspi,
&dbgfs_state_fops);
cfspi->dbgfs_frame = debugfs_create_file("frame", S_IRUGO,
cfspi->dbgfs_frame = debugfs_create_file("frame", 0444,
cfspi->dbgfs_dir, cfspi,
&dbgfs_frame_fops);
}
......
......@@ -629,21 +629,21 @@ static inline void debugfs_init(struct cfv_info *cfv)
if (IS_ERR(cfv->debugfs))
return;
debugfs_create_u32("rx-napi-complete", S_IRUSR, cfv->debugfs,
debugfs_create_u32("rx-napi-complete", 0400, cfv->debugfs,
&cfv->stats.rx_napi_complete);
debugfs_create_u32("rx-napi-resched", S_IRUSR, cfv->debugfs,
debugfs_create_u32("rx-napi-resched", 0400, cfv->debugfs,
&cfv->stats.rx_napi_resched);
debugfs_create_u32("rx-nomem", S_IRUSR, cfv->debugfs,
debugfs_create_u32("rx-nomem", 0400, cfv->debugfs,
&cfv->stats.rx_nomem);
debugfs_create_u32("rx-kicks", S_IRUSR, cfv->debugfs,
debugfs_create_u32("rx-kicks", 0400, cfv->debugfs,
&cfv->stats.rx_kicks);
debugfs_create_u32("tx-full-ring", S_IRUSR, cfv->debugfs,
debugfs_create_u32("tx-full-ring", 0400, cfv->debugfs,
&cfv->stats.tx_full_ring);
debugfs_create_u32("tx-no-mem", S_IRUSR, cfv->debugfs,
debugfs_create_u32("tx-no-mem", 0400, cfv->debugfs,
&cfv->stats.tx_no_mem);
debugfs_create_u32("tx-kicks", S_IRUSR, cfv->debugfs,
debugfs_create_u32("tx-kicks", 0400, cfv->debugfs,
&cfv->stats.tx_kicks);
debugfs_create_u32("tx-flow-on", S_IRUSR, cfv->debugfs,
debugfs_create_u32("tx-flow-on", 0400, cfv->debugfs,
&cfv->stats.tx_flow_on);
}
......
......@@ -1224,8 +1224,7 @@ static ssize_t at91_sysfs_set_mb0_id(struct device *dev,
return ret;
}
static DEVICE_ATTR(mb0_id, S_IWUSR | S_IRUGO,
at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id);
static DEVICE_ATTR(mb0_id, 0644, at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id);
static struct attribute *at91_sysfs_attrs[] = {
&dev_attr_mb0_id.attr,
......
......@@ -67,12 +67,12 @@ MODULE_DESCRIPTION(KBUILD_MODNAME "CAN netdevice driver");
* otherwise 11 bit SFF messages.
*/
static int msgobj15_eff;
module_param(msgobj15_eff, int, S_IRUGO);
module_param(msgobj15_eff, int, 0444);
MODULE_PARM_DESC(msgobj15_eff, "Extended 29-bit frames for message object 15 "
"(default: 11-bit standard frames)");
static int i82527_compat;
module_param(i82527_compat, int, S_IRUGO);
module_param(i82527_compat, int, 0444);
MODULE_PARM_DESC(i82527_compat, "Strict Intel 82527 comptibility mode "
"without using additional functions");
......
......@@ -82,29 +82,29 @@ static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
module_param_hw_array(port, ulong, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "I/O port number");
module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
module_param_hw_array(mem, ulong, iomem, NULL, 0444);
MODULE_PARM_DESC(mem, "I/O memory address");
module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
module_param_hw_array(indirect, int, ioport, NULL, 0444);
MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ number");
module_param_array(clk, int, NULL, S_IRUGO);
module_param_array(clk, int, NULL, 0444);
MODULE_PARM_DESC(clk, "External oscillator clock frequency "
"(default=16000000 [16 MHz])");
module_param_array(cir, byte, NULL, S_IRUGO);
module_param_array(cir, byte, NULL, 0444);
MODULE_PARM_DESC(cir, "CPU interface register (default=0x40 [DSC])");
module_param_array(cor, byte, NULL, S_IRUGO);
module_param_array(cor, byte, NULL, 0444);
MODULE_PARM_DESC(cor, "Clockout register (default=0x00)");
module_param_array(bcr, byte, NULL, S_IRUGO);
module_param_array(bcr, byte, NULL, 0444);
MODULE_PARM_DESC(bcr, "Bus configuration register (default=0x40 [CBY])");
#define CC770_IOSIZE 0x20
......
......@@ -1484,7 +1484,7 @@ static netdev_tx_t grcan_start_xmit(struct sk_buff *skb,
} \
} \
module_param_named(name, grcan_module_config.name, \
mtype, S_IRUGO); \
mtype, 0444); \
MODULE_PARM_DESC(name, desc)
#define GRCAN_CONFIG_ATTR(name, desc) \
......@@ -1513,7 +1513,7 @@ static netdev_tx_t grcan_start_xmit(struct sk_buff *skb,
struct grcan_priv *priv = netdev_priv(dev); \
return sprintf(buf, "%d\n", priv->config.name); \
} \
static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(name, 0644, \
grcan_show_##name, \
grcan_store_##name); \
GRCAN_MODULE_PARAM(name, ushort, GRCAN_NOT_BOOL, desc)
......
......@@ -1865,9 +1865,9 @@ static ssize_t ican3_sysfs_show_fwinfo(struct device *dev,
return scnprintf(buf, PAGE_SIZE, "%s\n", mod->fwinfo);
}
static DEVICE_ATTR(termination, S_IWUSR | S_IRUGO, ican3_sysfs_show_term,
static DEVICE_ATTR(termination, 0644, ican3_sysfs_show_term,
ican3_sysfs_set_term);
static DEVICE_ATTR(fwinfo, S_IRUSR | S_IRUGO, ican3_sysfs_show_fwinfo, NULL);
static DEVICE_ATTR(fwinfo, 0444, ican3_sysfs_show_fwinfo, NULL);
static struct attribute *ican3_sysfs_attrs[] = {
&dev_attr_termination.attr,
......
......@@ -48,27 +48,27 @@ static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
static spinlock_t indirect_lock[MAXDEV]; /* lock for indirect access mode */
module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
module_param_hw_array(port, ulong, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "I/O port number");
module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
module_param_hw_array(mem, ulong, iomem, NULL, 0444);
MODULE_PARM_DESC(mem, "I/O memory address");
module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
module_param_hw_array(indirect, int, ioport, NULL, 0444);
MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ number");
module_param_array(clk, int, NULL, S_IRUGO);
module_param_array(clk, int, NULL, 0444);
MODULE_PARM_DESC(clk, "External oscillator clock frequency "
"(default=16000000 [16 MHz])");
module_param_array(cdr, byte, NULL, S_IRUGO);
module_param_array(cdr, byte, NULL, 0444);
MODULE_PARM_DESC(cdr, "Clock divider register "
"(default=0x48 [CDR_CBP | CDR_CLK_OFF])");
module_param_array(ocr, byte, NULL, S_IRUGO);
module_param_array(ocr, byte, NULL, 0444);
MODULE_PARM_DESC(ocr, "Output control register "
"(default=0x18 [OCR_TX0_PUSHPULL])");
......
......@@ -601,8 +601,8 @@ static ssize_t store_output(struct device *dev, struct device_attribute *attr,
return count;
}
static const DEVICE_ATTR(chip, S_IRUGO, show_chip, NULL);
static const DEVICE_ATTR(output, S_IRUGO | S_IWUSR, show_output, store_output);
static const DEVICE_ATTR(chip, 0444, show_chip, NULL);
static const DEVICE_ATTR(output, 0644, show_output, store_output);
static const struct attribute *const netdev_sysfs_attrs[] = {
&dev_attr_chip.attr,
......
......@@ -220,7 +220,7 @@
#define DEVICE_NAME "mcp251x"
static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
module_param(mcp251x_enable_dma, int, S_IRUGO);
module_param(mcp251x_enable_dma, int, 0444);
MODULE_PARM_DESC(mcp251x_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
static const struct can_bittiming_const mcp251x_bittiming_const = {
......
......@@ -496,7 +496,7 @@ static ssize_t show_firmware(struct device *d,
(dev->version >> 8) & 0xf,
dev->version & 0xff);
}
static DEVICE_ATTR(firmware, S_IRUGO, show_firmware, NULL);
static DEVICE_ATTR(firmware, 0444, show_firmware, NULL);
static ssize_t show_hardware(struct device *d,
struct device_attribute *attr, char *buf)
......@@ -509,7 +509,7 @@ static ssize_t show_hardware(struct device *d,
(dev->version >> 24) & 0xf,
(dev->version >> 16) & 0xff);
}
static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
static DEVICE_ATTR(hardware, 0444, show_hardware, NULL);
static ssize_t show_nets(struct device *d,
struct device_attribute *attr, char *buf)
......@@ -519,7 +519,7 @@ static ssize_t show_nets(struct device *d,
return sprintf(buf, "%d", dev->net_count);
}
static DEVICE_ATTR(nets, S_IRUGO, show_nets, NULL);
static DEVICE_ATTR(nets, 0444, show_nets, NULL);
static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
{
......
......@@ -65,7 +65,7 @@ MODULE_ALIAS_RTNL_LINK(DRV_NAME);
*/
static bool echo; /* echo testing. Default: 0 (Off) */
module_param(echo, bool, S_IRUGO);
module_param(echo, bool, 0444);
MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
......
......@@ -590,8 +590,7 @@ static int bpq_device_event(struct notifier_block *this,
static int __init bpq_init_driver(void)
{
#ifdef CONFIG_PROC_FS
if (!proc_create("bpqether", S_IRUGO, init_net.proc_net,
&bpq_info_fops)) {
if (!proc_create("bpqether", 0444, init_net.proc_net, &bpq_info_fops)) {
printk(KERN_ERR
"bpq: cannot create /proc/net/bpqether entry.\n");
return -ENOENT;
......
......@@ -1168,7 +1168,7 @@ static int __init yam_init_driver(void)
yam_timer.expires = jiffies + HZ / 100;
add_timer(&yam_timer);
proc_create("yam", S_IRUGO, init_net.proc_net, &yam_info_fops);
proc_create("yam", 0444, init_net.proc_net, &yam_info_fops);
return 0;
error:
while (--i >= 0) {
......
......@@ -55,7 +55,7 @@
#define VF_TAKEOVER_INT (HZ / 10)
static unsigned int ring_size __ro_after_init = 128;
module_param(ring_size, uint, S_IRUGO);
module_param(ring_size, uint, 0444);
MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)");
unsigned int netvsc_ring_bytes __ro_after_init;
struct reciprocal_value netvsc_ring_reciprocal __ro_after_init;
......@@ -66,7 +66,7 @@ static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_TX_ERR;
static int debug = -1;
module_param(debug, int, S_IRUGO);
module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
static void netvsc_change_rx_flags(struct net_device *net, int change)
......
......@@ -1661,7 +1661,7 @@ static int at86rf230_debugfs_init(struct at86rf230_local *lp)
if (!at86rf230_debugfs_root)
return -ENOMEM;
stats = debugfs_create_file("trac_stats", S_IRUGO,
stats = debugfs_create_file("trac_stats", 0444,
at86rf230_debugfs_root, lp,
&at86rf230_stats_fops);
if (!stats)
......
......@@ -417,7 +417,7 @@ static void ks8995_parse_dt(struct ks8995_switch *ks)
static const struct bin_attribute ks8995_registers_attr = {
.attr = {
.name = "registers",
.mode = S_IRUSR | S_IWUSR,
.mode = 0600,
},
.size = KS8995_REGS_SIZE,
.read = ks8995_registers_read,
......
......@@ -1687,7 +1687,7 @@ ppp_push(struct ppp *ppp)
#ifdef CONFIG_PPP_MULTILINK
static bool mp_protocol_compress __read_mostly = true;
module_param(mp_protocol_compress, bool, S_IRUGO | S_IWUSR);
module_param(mp_protocol_compress, bool, 0644);
MODULE_PARM_DESC(mp_protocol_compress,
"compress protocol id in multilink fragments");
......
......@@ -1142,7 +1142,7 @@ static __net_init int pppoe_init_net(struct net *net)
rwlock_init(&pn->hash_lock);
pde = proc_create("pppoe", S_IRUGO, net->proc_net, &pppoe_seq_fops);
pde = proc_create("pppoe", 0444, net->proc_net, &pppoe_seq_fops);
#ifdef CONFIG_PROC_FS
if (!pde)
return -ENOMEM;
......
......@@ -58,7 +58,7 @@ static bool prefer_mbim = true;
#else
static bool prefer_mbim;
#endif
module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
module_param(prefer_mbim, bool, 0644);
MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
static void cdc_ncm_txpath_bh(unsigned long param);
......@@ -281,10 +281,10 @@ static ssize_t cdc_ncm_store_tx_timer_usecs(struct device *d, struct device_att
return len;
}
static DEVICE_ATTR(min_tx_pkt, S_IRUGO | S_IWUSR, cdc_ncm_show_min_tx_pkt, cdc_ncm_store_min_tx_pkt);
static DEVICE_ATTR(rx_max, S_IRUGO | S_IWUSR, cdc_ncm_show_rx_max, cdc_ncm_store_rx_max);
static DEVICE_ATTR(tx_max, S_IRUGO | S_IWUSR, cdc_ncm_show_tx_max, cdc_ncm_store_tx_max);
static DEVICE_ATTR(tx_timer_usecs, S_IRUGO | S_IWUSR, cdc_ncm_show_tx_timer_usecs, cdc_ncm_store_tx_timer_usecs);
static DEVICE_ATTR(min_tx_pkt, 0644, cdc_ncm_show_min_tx_pkt, cdc_ncm_store_min_tx_pkt);
static DEVICE_ATTR(rx_max, 0644, cdc_ncm_show_rx_max, cdc_ncm_store_rx_max);
static DEVICE_ATTR(tx_max, 0644, cdc_ncm_show_tx_max, cdc_ncm_store_tx_max);
static DEVICE_ATTR(tx_timer_usecs, 0644, cdc_ncm_show_tx_timer_usecs, cdc_ncm_store_tx_timer_usecs);
static ssize_t ndp_to_end_show(struct device *d, struct device_attribute *attr, char *buf)
{
......@@ -335,7 +335,7 @@ static ssize_t cdc_ncm_show_##name(struct device *d, struct device_attribute *at
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; \
return sprintf(buf, format "\n", tocpu(ctx->ncm_parm.name)); \
} \
static DEVICE_ATTR(name, S_IRUGO, cdc_ncm_show_##name, NULL)
static DEVICE_ATTR(name, 0444, cdc_ncm_show_##name, NULL)
NCM_PARM_ATTR(bmNtbFormatsSupported, "0x%04x", le16_to_cpu);
NCM_PARM_ATTR(dwNtbInMaxSize, "%u", le32_to_cpu);
......
......@@ -519,7 +519,7 @@ static ssize_t hso_sysfs_show_porttype(struct device *dev,
return sprintf(buf, "%s\n", port_name);
}
static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
static DEVICE_ATTR(hsotype, 0444, hso_sysfs_show_porttype, NULL);
static struct attribute *hso_serial_dev_attrs[] = {
&dev_attr_hsotype.attr,
......@@ -3289,12 +3289,12 @@ MODULE_LICENSE("GPL");
/* change the debug level (eg: insmod hso.ko debug=0x04) */
MODULE_PARM_DESC(debug, "debug level mask [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
module_param(debug, int, S_IRUGO | S_IWUSR);
module_param(debug, int, 0644);
/* set the major tty number (eg: insmod hso.ko tty_major=245) */
MODULE_PARM_DESC(tty_major, "Set the major tty number");
module_param(tty_major, int, S_IRUGO | S_IWUSR);
module_param(tty_major, int, 0644);
/* disable network interface (eg: insmod hso.ko disable_net=1) */
MODULE_PARM_DESC(disable_net, "Disable the network interface");
module_param(disable_net, int, S_IRUGO | S_IWUSR);
module_param(disable_net, int, 0644);
......@@ -224,7 +224,7 @@ static void xenvif_debugfs_addif(struct xenvif *vif)
snprintf(filename, sizeof(filename), "io_ring_q%d", i);
pfile = debugfs_create_file(filename,
S_IRUSR | S_IWUSR,
0600,
vif->xenvif_dbg_root,
&vif->queues[i],
&xenvif_dbg_io_ring_ops_fops);
......@@ -235,7 +235,7 @@ static void xenvif_debugfs_addif(struct xenvif *vif)
if (vif->ctrl_irq) {
pfile = debugfs_create_file("ctrl",
S_IRUSR,
0400,
vif->xenvif_dbg_root,
vif,
&xenvif_dbg_ctrl_ops_fops);
......
......@@ -2113,9 +2113,9 @@ static ssize_t store_rxbuf(struct device *dev,
return len;
}
static DEVICE_ATTR(rxbuf_min, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf);
static DEVICE_ATTR(rxbuf_max, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf);
static DEVICE_ATTR(rxbuf_cur, S_IRUGO, show_rxbuf, NULL);
static DEVICE_ATTR(rxbuf_min, 0644, show_rxbuf, store_rxbuf);
static DEVICE_ATTR(rxbuf_max, 0644, show_rxbuf, store_rxbuf);
static DEVICE_ATTR(rxbuf_cur, 0444, show_rxbuf, NULL);
static struct attribute *xennet_dev_attrs[] = {
&dev_attr_rxbuf_min.attr,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment