dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panel

The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.

There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.

Alter the filename and compatible string to reflect the convention.

Fixes: 45b888a8 ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com

Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml → Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml

 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml#
+$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel
+title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
 
 maintainers:
   - Ryan Walklin <ryan@testtoast.com>
@@ -15,7 +15,14 @@ allOf:
 
 properties:
   compatible:
-    const: wl-355608-a8
+    oneOf:
+      - const: anbernic,rg35xx-plus-panel
+      - items:
+          - enum:
+              - anbernic,rg35xx-2024-panel
+              - anbernic,rg35xx-h-panel
+              - anbernic,rg35xx-sp-panel
+          - const: anbernic,rg35xx-plus-panel
 
   reg:
     maxItems: 1
@@ -40,7 +47,7 @@ examples:
         #size-cells = <0>;
 
         panel@0 {
-            compatible = "wl-355608-a8";
+            compatible = "anbernic,rg35xx-plus-panel";
             reg = <0>;
 
             spi-3wire;