Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/mach-omap/time.c

 /*
- * arch/arm/mach-omap/time.c
+ * linux/arch/arm/mach-omap/time.c
  *
- * OMAP Timer Tick 
+ * OMAP Timers
  *
+ * Copyright (C) 2004 Nokia Corporation
+ * Partial timer rewrite and additional VST timer support by
+ * Tony Lindgen <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * MPU timer code based on the older MPU timer code for OMAP
  * Copyright (C) 2000 RidgeRun, Inc.
  * Author: Greg Lonnon <glonnon@ridgerun.com>
  *
@@ -33,6 +39,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/spinlock.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
@@ -42,181 +49,134 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#ifndef __instrument
-#define __instrument
-#define __noinstrument __attribute__ ((no_instrument_function))
-#endif
-
-typedef struct {
-	u32 cntl;     /* CNTL_TIMER, R/W */
-	u32 load_tim; /* LOAD_TIM,   W */
-	u32 read_tim; /* READ_TIM,   R */
-} mputimer_regs_t;
-
-#define mputimer_base(n) \
-    ((volatile mputimer_regs_t*)IO_ADDRESS(OMAP_MPUTIMER_BASE + \
-				 (n)*OMAP_MPUTIMER_OFFSET))
-
-static inline unsigned long timer32k_read(int reg) {
-	unsigned long val;
-	val = omap_readw(reg + OMAP_32kHz_TIMER_BASE);
-	return val;
-}
-static inline void timer32k_write(int reg,int val) {
-	omap_writew(val, reg + OMAP_32kHz_TIMER_BASE);
-}
+struct sys_timer omap_timer;
 
 /*
- * How long is the timer interval? 100 HZ, right...
- * IRQ rate = (TVR + 1) / 32768 seconds
- * TVR = 32768 * IRQ_RATE -1
- * IRQ_RATE =  1/100
- * TVR = 326
+ * ---------------------------------------------------------------------------
+ * MPU timer
+ * ---------------------------------------------------------------------------
  */
-#define TIMER32k_PERIOD 326
-//#define TIMER32k_PERIOD 0x7ff
+#define OMAP_MPU_TIMER1_BASE		(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE		(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE		(0xfffec700)
+#define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
+#define OMAP_MPU_TIMER_OFFSET		0x100
 
-static inline void start_timer32k(void) {
-	timer32k_write(TIMER32k_CR,
-		       TIMER32k_TSS | TIMER32k_TRB |
-		       TIMER32k_INT | TIMER32k_ARL);
-}
+#define MPU_TIMER_FREE			(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE		(1 << 5)
+#define MPU_TIMER_AR			(1 << 1)
+#define MPU_TIMER_ST			(1 << 0)
 
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
 /*
- * After programming PTV with 0 and setting the MPUTIM_CLOCK_ENABLE
- * (external clock enable)  bit, the timer count rate is 6.5 MHz (13
- * MHZ input/2). !! The divider by 2 is undocumented !!
+ * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
+ * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
+ * with 0. This divides the 13MHz input by 2, and is undocumented.
  */
-#define MPUTICKS_PER_SEC (13000000/2)
-#else
-/*
- * After programming PTV with 0, the timer count rate is 6 MHz.
- * WARNING! this must be an even number, or machinecycles_to_usecs
- * below will break.
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+/* REVISIT: This ifdef construct should be replaced by a query to clock
+ * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
  */
-#define MPUTICKS_PER_SEC  (12000000/2)
+#define MPU_TICKS_PER_SEC		(13000000 / 2)
+#else
+#define MPU_TICKS_PER_SEC		(12000000 / 2)
 #endif
 
-static int mputimer_started[3] = {0,0,0};
-
-static inline void __noinstrument start_mputimer(int n,
-						 unsigned long load_val)
-{
-	volatile mputimer_regs_t* timer = mputimer_base(n);
+#define MPU_TIMER_TICK_PERIOD		((MPU_TICKS_PER_SEC / HZ) - 1)
 
-	mputimer_started[n] = 0;
-	timer->cntl = MPUTIM_CLOCK_ENABLE;
-	udelay(1);
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} omap_mpu_timer_regs_t;
 
-	timer->load_tim = load_val;
-        udelay(1);
-	timer->cntl = (MPUTIM_CLOCK_ENABLE | MPUTIM_AR | MPUTIM_ST);
-	mputimer_started[n] = 1;
-}
+#define omap_mpu_timer_base(n)						\
+((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+				 (n)*OMAP_MPU_TIMER_OFFSET))
 
-static inline unsigned long __noinstrument
-read_mputimer(int n)
+static inline unsigned long omap_mpu_timer_read(int nr)
 {
-	volatile mputimer_regs_t* timer = mputimer_base(n);
-	return (mputimer_started[n] ? timer->read_tim : 0);
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	return timer->read_tim;
 }
 
-void __noinstrument start_mputimer1(unsigned long load_val)
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
 {
-	start_mputimer(0, load_val);
-}
-void __noinstrument start_mputimer2(unsigned long load_val)
-{
-	start_mputimer(1, load_val);
-}
-void __noinstrument start_mputimer3(unsigned long load_val)
-{
-	start_mputimer(2, load_val);
-}
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
-unsigned long __noinstrument read_mputimer1(void)
-{
-	return read_mputimer(0);
-}
-unsigned long __noinstrument read_mputimer2(void)
-{
-	return read_mputimer(1);
-}
-unsigned long __noinstrument read_mputimer3(void)
-{
-	return read_mputimer(2);
-}
-
-unsigned long __noinstrument do_getmachinecycles(void)
-{
-	return 0 - read_mputimer(0);
+	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+	udelay(1);
+	timer->load_tim = load_val;
+        udelay(1);
+	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
 }
 
-unsigned long __noinstrument machinecycles_to_usecs(unsigned long mputicks)
+unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
 {
 	/* Round up to nearest usec */
-	return ((mputicks * 1000) / (MPUTICKS_PER_SEC / 2 / 1000) + 1) >> 1;
+	return ((nr_ticks * 1000) / (MPU_TICKS_PER_SEC / 2 / 1000) + 1) >> 1;
 }
 
 /*
- * This marks the time of the last system timer interrupt
- * that was *processed by the ISR* (timer 2).
+ * Last processed system timer interrupt
  */
-static unsigned long systimer_mark;
+static unsigned long omap_mpu_timer_last = 0;
 
-static unsigned long omap_gettimeoffset(void)
+/*
+ * Returns elapsed usecs since last system timer interrupt
+ */
+static unsigned long omap_mpu_timer_gettimeoffset(void)
 {
-	/* Return elapsed usecs since last system timer ISR */
-	return machinecycles_to_usecs(do_getmachinecycles() - systimer_mark);
+	unsigned long now = 0 - omap_mpu_timer_read(0);
+	unsigned long elapsed = now - omap_mpu_timer_last;
+
+	return omap_mpu_timer_ticks_to_usecs(elapsed);
 }
 
-static irqreturn_t
-omap_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+/*
+ * Elapsed time between interrupts is calculated using timer0.
+ * Latency during the interrupt is calculated using timer1.
+ * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
+ */
+static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id,
+					struct pt_regs *regs)
 {
-	unsigned long now, ilatency;
+	unsigned long now, latency;
 
 	write_seqlock(&xtime_lock);
-
-	/*
-	 * Mark the time at which the timer interrupt ocurred using
-	 * timer1. We need to remove interrupt latency, which we can
-	 * retrieve from the current system timer2 counter. Both the
-	 * offset timer1 and the system timer2 are counting at 6MHz,
-	 * so we're ok.
-	 */
-	now = 0 - read_mputimer1();
-	ilatency = MPUTICKS_PER_SEC / 100 - read_mputimer2();
-	systimer_mark = now - ilatency;
-
+	now = 0 - omap_mpu_timer_read(0);
+	latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
+	omap_mpu_timer_last = now - latency;
 	timer_tick(regs);
-
 	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_timer_irq = {
-	.name		= "OMAP Timer Tick",
+static struct irqaction omap_mpu_timer_irq = {
+	.name		= "mpu timer",
 	.flags		= SA_INTERRUPT,
-	.handler	= omap_timer_interrupt
+	.handler	= omap_mpu_timer_interrupt
 };
 
-static void __init omap_timer_init(void)
+static __init void omap_init_mpu_timer(void)
 {
-	/* Since we don't call request_irq, we must init the structure */
-#ifdef OMAP1510_USE_32KHZ_TIMER
-	timer32k_write(TIMER32k_CR, 0x0);
-	timer32k_write(TIMER32k_TVR,TIMER32k_PERIOD);
-	setup_irq(INT_OS_32kHz_TIMER, &omap_timer_irq);
-	start_timer32k();
-#else
-	setup_irq(INT_TIMER2, &omap_timer_irq);
-	start_mputimer2(MPUTICKS_PER_SEC / 100 - 1);
-#endif
+	omap_timer.offset = omap_mpu_timer_gettimeoffset;
+	setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
+	omap_mpu_timer_start(0, 0xffffffff);
+	omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+void __init omap_timer_init(void)
+{
+	omap_init_mpu_timer();
 }
 
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
-	.offset		= omap_gettimeoffset,
+	.offset		= NULL,		/* Initialized later */
 };

arch/arm/mach-pxa/generic.c

@@ -138,7 +138,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 {
 	pxamci_device.dev.platform_data = info;
 }
-EXPORT_SYMBOL(pxa_set_mci_info);
 
 
 static struct pxa2xx_udc_mach_info pxa_udc_info;
@@ -147,7 +146,6 @@ void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
 {
 	memcpy(&pxa_udc_info, info, sizeof *info);
 }
-EXPORT_SYMBOL(pxa_set_udc_info);
 
 static struct resource pxa2xx_udc_resources[] = {
 	[0] = {
@@ -181,7 +179,6 @@ void __init set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info)
 {
 	memcpy(&pxa_fb_info,hard_pxa_fb_info,sizeof(struct pxafb_mach_info));
 }
-EXPORT_SYMBOL(set_pxa_fb_info);
 
 static struct resource pxafb_resources[] = {
 	[0] = {

arch/arm/mach-sa1100/Kconfig

@@ -143,17 +143,6 @@ config SA1100_SSP
 	  other devices, eg for BadgePAD 4 sensor support, or Jornada
 	  720 touchscreen support.
 
-config SA1100_USB
-	tristate "SA1100 USB function support"
-
-config SA1100_USB_NETLINK
-	tristate "Support for SA11x0 USB network link function"
-	depends on SA1100_USB
-
-config SA1100_USB_CHAR
-	tristate "Support for SA11x0 USB character device emulation"
-	depends on SA1100_USB
-
 config H3600_SLEEVE
 	tristate "Compaq iPAQ Handheld sleeve support"
 	depends on SA1100_H3600