I2C: move i2c-elektor.c driver to drivers/i2c/busses/

drivers/i2c/Kconfig

@@ -107,16 +107,6 @@ config I2C_ALGOPCF
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-algo-pcf.
 
-config I2C_ELEKTOR
-	tristate "Elektor ISA card"
-	depends on I2C_ALGOPCF && BROKEN_ON_SMP
-	help
-	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
-	  such an adapter.
-
-	  This support is also available as a module.  If so, the module 
-	  will be called i2c-elektor.
-
 config I2C_KEYWEST
 	tristate "Powermac Keywest I2C interface"
 	depends on I2C && PPC_PMAC

drivers/i2c/Makefile

@@ -7,7 +7,6 @@ obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
 obj-$(CONFIG_I2C_VELLEMAN)	+= i2c-velleman.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
-obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
 obj-$(CONFIG_ITE_I2C_ALGO)	+= i2c-algo-ite.o
 obj-$(CONFIG_ITE_I2C_ADAP)	+= i2c-adap-ite.o

drivers/i2c/busses/Kconfig

@@ -46,6 +46,16 @@ config I2C_AMD8111
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-amd8111.
 
+config I2C_ELEKTOR
+	tristate "Elektor ISA card"
+	depends on I2C_ALGOPCF && BROKEN_ON_SMP
+	help
+	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
+	  such an adapter.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-elektor.
+
 config I2C_ELV
 	tristate "ELV adapter"
 	depends on I2C_ALGOBIT && ISA

drivers/i2c/busses/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
 obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
 obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
 obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
+obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_ELV)		+= i2c-elv.o
 obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
 obj-$(CONFIG_I2C_I810)		+= i2c-i810.o

drivers/i2c/i2c-elektor.c → drivers/i2c/busses/i2c-elektor.c

@@ -41,7 +41,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "i2c-pcf8584.h"
+#include "../i2c-pcf8584.h"
 
 #define DEFAULT_BASE 0x330