diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
new file mode 100644
index 0000000000000000000000000000000000000000..e361f9dc52460ee273df860ec18fb19be1c36567
--- /dev/null
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -0,0 +1,1247 @@
+/*
+ comedi/drivers/pcl816.c
+
+ Author: Juan Grigera <juan@grigera.com.ar>
+ based on pcl818 by Michal Dobes <dobes@tesnet.cz> and bits of pcl812
+
+ hardware driver for Advantech cards:
+ card: PCL-816, PCL814B
+ driver: pcl816
+*/
+/*
+Driver: pcl816
+Description: Advantech PCL-816 cards, PCL-814
+Author: Juan Grigera <juan@grigera.com.ar>
+Devices: [Advantech] PCL-816 (pcl816), PCL-814B (pcl814b)
+Status: works
+Updated: Tue, 2 Apr 2002 23:15:21 -0800
+
+PCL 816 and 814B have 16 SE/DIFF ADCs, 16 DACs, 16 DI and 16 DO.
+Differences are at resolution (16 vs 12 bits).
+
+The driver support AI command mode, other subdevices not written.
+
+Analog output and digital input and output are not supported.
+
+Configuration Options:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+
+*/
+
+#include "../comedidev.h"
+
+#include <linux/ioport.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+#include <asm/dma.h>
+
+#include "8253.h"
+
+#define DEBUG(x) x
+
+// boards constants
+// IO space len
+#define PCLx1x_RANGE 16
+
+//#define outb(x,y) printk("OUTB(%x, 200+%d)\n", x,y-0x200); outb(x,y)
+
+// INTEL 8254 counters
+#define PCL816_CTR0 4
+#define PCL816_CTR1 5
+#define PCL816_CTR2 6
+// R: counter read-back register W: counter control
+#define PCL816_CTRCTL 7
+
+// R: A/D high byte W: A/D range control
+#define PCL816_RANGE 9
+// W: clear INT request
+#define PCL816_CLRINT 10
+// R: next mux scan channel W: mux scan channel & range control pointer
+#define PCL816_MUX 11
+// R/W: operation control register
+#define PCL816_CONTROL 12
+
+// R: return status byte W: set DMA/IRQ
+#define PCL816_STATUS 13
+#define PCL816_STATUS_DRDY_MASK 0x80
+
+// R: low byte of A/D W: soft A/D trigger
+#define PCL816_AD_LO 8
+// R: high byte of A/D W: A/D range control
+#define PCL816_AD_HI 9
+
+// type of interrupt handler
+#define INT_TYPE_AI1_INT 1
+#define INT_TYPE_AI1_DMA 2
+#define INT_TYPE_AI3_INT 4
+#define INT_TYPE_AI3_DMA 5
+#ifdef unused
+#define INT_TYPE_AI1_DMA_RTC 9
+#define INT_TYPE_AI3_DMA_RTC 10
+
+// RTC stuff...
+#define RTC_IRQ 8
+#define RTC_IO_EXTENT 0x10
+#endif
+
+#define MAGIC_DMA_WORD 0x5a5a
+
+static const comedi_lrange range_pcl816 = { 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ BIP_RANGE(1.25),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2.5),
+ UNI_RANGE(1.25),
+ }
+};
+typedef struct {
+ const char *name; // board name
+ int n_ranges; // len of range list
+ int n_aichan; // num of A/D chans in diferencial mode
+ unsigned int ai_ns_min; // minimal alllowed delay between samples (in ns)
+ int n_aochan; // num of D/A chans
+ int n_dichan; // num of DI chans
+ int n_dochan; // num of DO chans
+ const comedi_lrange *ai_range_type; // default A/D rangelist
+ const comedi_lrange *ao_range_type; // dafault D/A rangelist
+ unsigned int io_range; // len of IO space
+ unsigned int IRQbits; // allowed interrupts
+ unsigned int DMAbits; // allowed DMA chans
+ int ai_maxdata; // maxdata for A/D
+ int ao_maxdata; // maxdata for D/A
+ int ai_chanlist; // allowed len of channel list A/D
+ int ao_chanlist; // allowed len of channel list D/A
+ int i8254_osc_base; // 1/frequency of on board oscilator in ns
+} boardtype;
+
+static const boardtype boardtypes[] = {
+ {"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
+ &range_pcl816, PCLx1x_RANGE,
+ 0x00fc, // IRQ mask
+ 0x0a, // DMA mask
+ 0xffff, // 16-bit card
+ 0xffff, // D/A maxdata
+ 1024,
+ 1, // ao chan list
+ 100},
+ {"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
+ &range_pcl816, PCLx1x_RANGE,
+ 0x00fc,
+ 0x0a,
+ 0x3fff, /* 14 bit card */
+ 0x3fff,
+ 1024,
+ 1,
+ 100},
+};
+
+#define n_boardtypes (sizeof(boardtypes)/sizeof(boardtype))
+#define devpriv ((pcl816_private *)dev->private)
+#define this_board ((const boardtype *)dev->board_ptr)
+
+static int pcl816_attach(comedi_device * dev, comedi_devconfig * it);
+static int pcl816_detach(comedi_device * dev);
+
+#ifdef unused
+static int RTC_lock = 0; /* RTC lock */
+static int RTC_timer_lock = 0; /* RTC int lock */
+#endif
+
+static comedi_driver driver_pcl816 = {
+ driver_name:"pcl816",
+ module:THIS_MODULE,
+ attach:pcl816_attach,
+ detach:pcl816_detach,
+ board_name:&boardtypes[0].name,
+ num_names:n_boardtypes,
+ offset:sizeof(boardtype),
+};
+
+COMEDI_INITCLEANUP(driver_pcl816);
+
+typedef struct {
+ unsigned int dma; // used DMA, 0=don't use DMA
+ int dma_rtc; // 1=RTC used with DMA, 0=no RTC alloc
+#ifdef unused
+ unsigned long rtc_iobase; // RTC port region
+ unsigned int rtc_iosize;
+ unsigned int rtc_irq;
+#endif
+ unsigned long dmabuf[2]; // pointers to begin of DMA buffers
+ unsigned int dmapages[2]; // len of DMA buffers in PAGE_SIZEs
+ unsigned int hwdmaptr[2]; // hardware address of DMA buffers
+ unsigned int hwdmasize[2]; // len of DMA buffers in Bytes
+ unsigned int dmasamplsize; // size in samples hwdmasize[0]/2
+ unsigned int last_top_dma; // DMA pointer in last RTC int
+ int next_dma_buf; // which DMA buffer will be used next round
+ long dma_runs_to_end; // how many we must permorm DMA transfer to end of record
+ unsigned long last_dma_run; // how many bytes we must transfer on last DMA page
+
+ unsigned int ai_scans; // len of scanlist
+ unsigned char ai_neverending; // if=1, then we do neverending record (you must use cancel())
+ int irq_free; // 1=have allocated IRQ
+ int irq_blocked; // 1=IRQ now uses any subdev
+#ifdef unused
+ int rtc_irq_blocked; // 1=we now do AI with DMA&RTC
+#endif
+ int irq_was_now_closed; // when IRQ finish, there's stored int816_mode for last interrupt
+ int int816_mode; // who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma
+ comedi_subdevice *last_int_sub; // ptr to subdevice which now finish
+ int ai_act_scan; // how many scans we finished
+ unsigned int ai_act_chanlist[16]; // MUX setting for actual AI operations
+ unsigned int ai_act_chanlist_len; // how long is actual MUX list
+ unsigned int ai_act_chanlist_pos; // actual position in MUX list
+ unsigned int ai_poll_ptr; // how many sampes transfer poll
+ comedi_subdevice *sub_ai; // ptr to AI subdevice
+#ifdef unused
+ struct timer_list rtc_irq_timer; // timer for RTC sanity check
+ unsigned long rtc_freq; // RTC int freq
+#endif
+} pcl816_private;
+
+/*
+==============================================================================
+*/
+static int check_and_setup_channel_list(comedi_device * dev,
+ comedi_subdevice * s, unsigned int *chanlist, int chanlen);
+static int pcl816_ai_cancel(comedi_device * dev, comedi_subdevice * s);
+static void start_pacer(comedi_device * dev, int mode, unsigned int divisor1,
+ unsigned int divisor2);
+#ifdef unused
+static int set_rtc_irq_bit(unsigned char bit);
+#endif
+
+static int pcl816_ai_cmdtest(comedi_device * dev, comedi_subdevice * s,
+ comedi_cmd * cmd);
+static int pcl816_ai_cmd(comedi_device * dev, comedi_subdevice * s);
+
+/*
+==============================================================================
+ ANALOG INPUT MODE0, 816 cards, slow version
+*/
+static int pcl816_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ int n;
+ int timeout;
+
+ DPRINTK("mode 0 analog input\n");
+ // software trigger, DMA and INT off
+ outb(0, dev->iobase + PCL816_CONTROL);
+ // clear INT (conversion end) flag
+ outb(0, dev->iobase + PCL816_CLRINT);
+
+ // Set the input channel
+ outb(CR_CHAN(insn->chanspec) & 0xf, dev->iobase + PCL816_MUX);
+ outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE); /* select gain */
+
+ for (n = 0; n < insn->n; n++) {
+
+ outb(0, dev->iobase + PCL816_AD_LO); /* start conversion */
+
+ timeout = 100;
+ while (timeout--) {
+ if (!(inb(dev->iobase + PCL816_STATUS) &
+ PCL816_STATUS_DRDY_MASK)) {
+ // return read value
+ data[n] =
+ ((inb(dev->iobase +
+ PCL816_AD_HI) << 8) |
+ (inb(dev->iobase + PCL816_AD_LO)));
+
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT (conversion end) flag */
+ break;
+ }
+ comedi_udelay(1);
+ }
+ // Return timeout error
+ if (!timeout) {
+ comedi_error(dev, "A/D insn timeout\n");
+ data[0] = 0;
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT (conversion end) flag */
+ return -EIO;
+ }
+
+ }
+ return n;
+}
+
+/*
+==============================================================================
+ analog input interrupt mode 1 & 3, 818 cards
+ one sample per interrupt version
+*/
+static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
+{
+ comedi_device *dev = d;
+ comedi_subdevice *s = dev->subdevices + 0;
+ int low, hi;
+ int timeout = 50; /* wait max 50us */
+
+ while (timeout--) {
+ if (!(inb(dev->iobase + PCL816_STATUS) &
+ PCL816_STATUS_DRDY_MASK))
+ break;
+ comedi_udelay(1);
+ }
+ if (!timeout) { // timeout, bail error
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
+ comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
+ pcl816_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+
+ }
+
+ // get the sample
+ low = inb(dev->iobase + PCL816_AD_LO);
+ hi = inb(dev->iobase + PCL816_AD_HI);
+
+ comedi_buf_put(s->async, (hi << 8) | low);
+
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
+
+ if (++devpriv->ai_act_chanlist_pos >= devpriv->ai_act_chanlist_len)
+ devpriv->ai_act_chanlist_pos = 0;
+
+ if (s->async->cur_chan == 0) {
+ devpriv->ai_act_scan++;
+ }
+
+ if (!devpriv->ai_neverending)
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
+ /* all data sampled */
+ pcl816_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA;
+ }
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+}
+
+/*
+==============================================================================
+ analog input dma mode 1 & 3, 816 cards
+*/
+static void transfer_from_dma_buf(comedi_device * dev, comedi_subdevice * s,
+ sampl_t * ptr, unsigned int bufptr, unsigned int len)
+{
+ int i;
+
+ s->async->events = 0;
+
+ for (i = 0; i < len; i++) {
+
+ comedi_buf_put(s->async, ptr[bufptr++]);
+
+ if (++devpriv->ai_act_chanlist_pos >=
+ devpriv->ai_act_chanlist_len) {
+ devpriv->ai_act_chanlist_pos = 0;
+ devpriv->ai_act_scan++;
+ }
+
+ if (!devpriv->ai_neverending)
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) { // all data sampled
+ pcl816_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA;
+ s->async->events |= COMEDI_CB_BLOCK;
+ break;
+ }
+ }
+
+ comedi_event(dev, s);
+}
+
+static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d)
+{
+ comedi_device *dev = d;
+ comedi_subdevice *s = dev->subdevices + 0;
+ int len, bufptr, this_dma_buf;
+ unsigned long dma_flags;
+ sampl_t *ptr;
+
+ disable_dma(devpriv->dma);
+ this_dma_buf = devpriv->next_dma_buf;
+
+ if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) { // switch dma bufs
+
+ devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
+ set_dma_mode(devpriv->dma, DMA_MODE_READ);
+ dma_flags = claim_dma_lock();
+// clear_dma_ff (devpriv->dma);
+ set_dma_addr(devpriv->dma,
+ devpriv->hwdmaptr[devpriv->next_dma_buf]);
+ if (devpriv->dma_runs_to_end) {
+ set_dma_count(devpriv->dma,
+ devpriv->hwdmasize[devpriv->next_dma_buf]);
+ } else {
+ set_dma_count(devpriv->dma, devpriv->last_dma_run);
+ }
+ release_dma_lock(dma_flags);
+ enable_dma(devpriv->dma);
+ }
+
+ devpriv->dma_runs_to_end--;
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
+
+ ptr = (sampl_t *) devpriv->dmabuf[this_dma_buf];
+
+ len = (devpriv->hwdmasize[0] >> 1) - devpriv->ai_poll_ptr;
+ bufptr = devpriv->ai_poll_ptr;
+ devpriv->ai_poll_ptr = 0;
+
+ transfer_from_dma_buf(dev, s, ptr, bufptr, len);
+ return IRQ_HANDLED;
+}
+
+/*
+==============================================================================
+ INT procedure
+*/
+static irqreturn_t interrupt_pcl816(int irq, void *d PT_REGS_ARG)
+{
+ comedi_device *dev = d;
+ DPRINTK("<I>");
+
+ if (!dev->attached) {
+ comedi_error(dev, "premature interrupt");
+ return IRQ_HANDLED;
+ }
+
+ switch (devpriv->int816_mode) {
+ case INT_TYPE_AI1_DMA:
+ case INT_TYPE_AI3_DMA:
+ return interrupt_pcl816_ai_mode13_dma(irq, d);
+ case INT_TYPE_AI1_INT:
+ case INT_TYPE_AI3_INT:
+ return interrupt_pcl816_ai_mode13_int(irq, d);
+ }
+
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
+ if ((!dev->irq) | (!devpriv->irq_free) | (!devpriv->irq_blocked) |
+ (!devpriv->int816_mode)) {
+ if (devpriv->irq_was_now_closed) {
+ devpriv->irq_was_now_closed = 0;
+ // comedi_error(dev,"last IRQ..");
+ return IRQ_HANDLED;
+ }
+ comedi_error(dev, "bad IRQ!");
+ return IRQ_NONE;
+ }
+ comedi_error(dev, "IRQ from unknow source!");
+ return IRQ_NONE;
+}
+
+/*
+==============================================================================
+ COMMAND MODE
+*/
+static void pcl816_cmdtest_out(int e, comedi_cmd * cmd)
+{
+ rt_printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+ cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
+ rt_printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+ cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
+ rt_printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+ cmd->scan_end_src);
+ rt_printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
+ cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
+}
+
+/*
+==============================================================================
+*/
+static int pcl816_ai_cmdtest(comedi_device * dev, comedi_subdevice * s,
+ comedi_cmd * cmd)
+{
+ int err = 0;
+ int tmp, divisor1, divisor2;
+
+ DEBUG(rt_printk("pcl816 pcl812_ai_cmdtest\n");
+ pcl816_cmdtest_out(-1, cmd););
+
+ /* step 1: make sure trigger sources are trivially valid */
+ tmp = cmd->start_src;
+ cmd->start_src &= TRIG_NOW;
+ if (!cmd->start_src || tmp != cmd->start_src)
+ err++;
+
+ tmp = cmd->scan_begin_src;
+ cmd->scan_begin_src &= TRIG_FOLLOW;
+ if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
+ err++;
+
+ if (!cmd->convert_src & (TRIG_EXT | TRIG_TIMER))
+ err++;
+
+ tmp = cmd->scan_end_src;
+ cmd->scan_end_src &= TRIG_COUNT;
+ if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
+ err++;
+
+ tmp = cmd->stop_src;
+ cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
+ if (!cmd->stop_src || tmp != cmd->stop_src)
+ err++;
+
+ if (err) {
+ return 1;
+ }
+
+ /* step 2: make sure trigger sources are unique and mutually compatible */
+
+ if (cmd->start_src != TRIG_NOW) {
+ cmd->start_src = TRIG_NOW;
+ err++;
+ }
+
+ if (cmd->scan_begin_src != TRIG_FOLLOW) {
+ cmd->scan_begin_src = TRIG_FOLLOW;
+ err++;
+ }
+
+ if (cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_TIMER) {
+ cmd->convert_src = TRIG_TIMER;
+ err++;
+ }
+
+ if (cmd->scan_end_src != TRIG_COUNT) {
+ cmd->scan_end_src = TRIG_COUNT;
+ err++;
+ }
+
+ if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
+ err++;
+
+ if (err) {
+ return 2;
+ }
+
+ /* step 3: make sure arguments are trivially compatible */
+ if (cmd->start_arg != 0) {
+ cmd->start_arg = 0;
+ err++;
+ }
+
+ if (cmd->scan_begin_arg != 0) {
+ cmd->scan_begin_arg = 0;
+ err++;
+ }
+ if (cmd->convert_src == TRIG_TIMER) {
+ if (cmd->convert_arg < this_board->ai_ns_min) {
+ cmd->convert_arg = this_board->ai_ns_min;
+ err++;
+ }
+ } else { /* TRIG_EXT */
+ if (cmd->convert_arg != 0) {
+ cmd->convert_arg = 0;
+ err++;
+ }
+ }
+
+ if (!cmd->chanlist_len) {
+ cmd->chanlist_len = 1;
+ err++;
+ }
+ if (cmd->chanlist_len > this_board->n_aichan) {
+ cmd->chanlist_len = this_board->n_aichan;
+ err++;
+ }
+ if (cmd->scan_end_arg != cmd->chanlist_len) {
+ cmd->scan_end_arg = cmd->chanlist_len;
+ err++;
+ }
+ if (cmd->stop_src == TRIG_COUNT) {
+ if (!cmd->stop_arg) {
+ cmd->stop_arg = 1;
+ err++;
+ }
+ } else { /* TRIG_NONE */
+ if (cmd->stop_arg != 0) {
+ cmd->stop_arg = 0;
+ err++;
+ }
+ }
+
+ if (err) {
+ return 3;
+ }
+
+ /* step 4: fix up any arguments */
+ if (cmd->convert_src == TRIG_TIMER) {
+ tmp = cmd->convert_arg;
+ i8253_cascade_ns_to_timer(this_board->i8254_osc_base,
+ &divisor1, &divisor2, &cmd->convert_arg,
+ cmd->flags & TRIG_ROUND_MASK);
+ if (cmd->convert_arg < this_board->ai_ns_min)
+ cmd->convert_arg = this_board->ai_ns_min;
+ if (tmp != cmd->convert_arg)
+ err++;
+ }
+
+ if (err) {
+ return 4;
+ }
+
+ return 0;
+}
+
+static int pcl816_ai_cmd(comedi_device * dev, comedi_subdevice * s)
+{
+ unsigned int divisor1 = 0, divisor2 = 0, dma_flags, bytes, dmairq;
+ comedi_cmd *cmd = &s->async->cmd;
+
+ if (cmd->start_src != TRIG_NOW)
+ return -EINVAL;
+ if (cmd->scan_begin_src != TRIG_FOLLOW)
+ return -EINVAL;
+ if (cmd->scan_end_src != TRIG_COUNT)
+ return -EINVAL;
+ if (cmd->scan_end_arg != cmd->chanlist_len)
+ return -EINVAL;
+// if(cmd->chanlist_len>MAX_CHANLIST_LEN) return -EINVAL;
+ if (devpriv->irq_blocked)
+ return -EBUSY;
+
+ if (cmd->convert_src == TRIG_TIMER) {
+ if (cmd->convert_arg < this_board->ai_ns_min)
+ cmd->convert_arg = this_board->ai_ns_min;
+
+ i8253_cascade_ns_to_timer(this_board->i8254_osc_base, &divisor1,
+ &divisor2, &cmd->convert_arg,
+ cmd->flags & TRIG_ROUND_MASK);
+ if (divisor1 == 1) { // PCL816 crash if any divisor is set to 1
+ divisor1 = 2;
+ divisor2 /= 2;
+ }
+ if (divisor2 == 1) {
+ divisor2 = 2;
+ divisor1 /= 2;
+ }
+ }
+
+ start_pacer(dev, -1, 0, 0); // stop pacer
+
+ if (!check_and_setup_channel_list(dev, s, cmd->chanlist,
+ cmd->chanlist_len))
+ return -EINVAL;
+ comedi_udelay(1);
+
+ devpriv->ai_act_scan = 0;
+ s->async->cur_chan = 0;
+ devpriv->irq_blocked = 1;
+ devpriv->ai_poll_ptr = 0;
+ devpriv->irq_was_now_closed = 0;
+
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ai_scans = cmd->stop_arg;
+ devpriv->ai_neverending = 0;
+ } else {
+ devpriv->ai_scans = 0;
+ devpriv->ai_neverending = 1;
+ }
+
+ if ((cmd->flags & TRIG_WAKE_EOS)) { // don't we want wake up every scan?
+ printk("pl816: You wankt WAKE_EOS but I dont want handle it");
+ // devpriv->ai_eos=1;
+ //if (devpriv->ai_n_chan==1)
+ // devpriv->dma=0; // DMA is useless for this situation
+ }
+
+ if (devpriv->dma) {
+ bytes = devpriv->hwdmasize[0];
+ if (!devpriv->ai_neverending) {
+ bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(sampl_t); // how many
+ devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; // how many DMA pages we must fill
+ devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; //on last dma transfer must be moved
+ devpriv->dma_runs_to_end--;
+ if (devpriv->dma_runs_to_end >= 0)
+ bytes = devpriv->hwdmasize[0];
+ } else
+ devpriv->dma_runs_to_end = -1;
+
+ devpriv->next_dma_buf = 0;
+ set_dma_mode(devpriv->dma, DMA_MODE_READ);
+ dma_flags = claim_dma_lock();
+ clear_dma_ff(devpriv->dma);
+ set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]);
+ set_dma_count(devpriv->dma, bytes);
+ release_dma_lock(dma_flags);
+ enable_dma(devpriv->dma);
+ }
+
+ start_pacer(dev, 1, divisor1, divisor2);
+ dmairq = ((devpriv->dma & 0x3) << 4) | (dev->irq & 0x7);
+
+ switch (cmd->convert_src) {
+ case TRIG_TIMER:
+ devpriv->int816_mode = INT_TYPE_AI1_DMA;
+ outb(0x32, dev->iobase + PCL816_CONTROL); // Pacer+IRQ+DMA
+ outb(dmairq, dev->iobase + PCL816_STATUS); // write irq and DMA to card
+ break;
+
+ default:
+ devpriv->int816_mode = INT_TYPE_AI3_DMA;
+ outb(0x34, dev->iobase + PCL816_CONTROL); // Ext trig+IRQ+DMA
+ outb(dmairq, dev->iobase + PCL816_STATUS); // write irq to card
+ break;
+ }
+
+ DPRINTK("pcl816 END: pcl812_ai_cmd()\n");
+ return 0;
+}
+
+static int pcl816_ai_poll(comedi_device * dev, comedi_subdevice * s)
+{
+ unsigned long flags;
+ unsigned int top1, top2, i;
+
+ if (!devpriv->dma)
+ return 0; // poll is valid only for DMA transfer
+
+ comedi_spin_lock_irqsave(&dev->spinlock, flags);
+
+ for (i = 0; i < 20; i++) {
+ top1 = get_dma_residue(devpriv->dma); // where is now DMA
+ top2 = get_dma_residue(devpriv->dma);
+ if (top1 == top2)
+ break;
+ }
+ if (top1 != top2) {
+ comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ return 0;
+ }
+
+ top1 = devpriv->hwdmasize[0] - top1; // where is now DMA in buffer
+ top1 >>= 1; // sample position
+ top2 = top1 - devpriv->ai_poll_ptr;
+ if (top2 < 1) { // no new samples
+ comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ return 0;
+ }
+
+ transfer_from_dma_buf(dev, s,
+ (sampl_t *) devpriv->dmabuf[devpriv->next_dma_buf],
+ devpriv->ai_poll_ptr, top2);
+
+ devpriv->ai_poll_ptr = top1; // new buffer position
+ comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+
+ return s->async->buf_write_count - s->async->buf_read_count;
+}
+
+/*
+==============================================================================
+ cancel any mode 1-4 AI
+*/
+static int pcl816_ai_cancel(comedi_device * dev, comedi_subdevice * s)
+{
+// DEBUG(rt_printk("pcl816_ai_cancel()\n");)
+
+ if (devpriv->irq_blocked > 0) {
+ switch (devpriv->int816_mode) {
+#ifdef unused
+ case INT_TYPE_AI1_DMA_RTC:
+ case INT_TYPE_AI3_DMA_RTC:
+ set_rtc_irq_bit(0); // stop RTC
+ del_timer(&devpriv->rtc_irq_timer);
+#endif
+ case INT_TYPE_AI1_DMA:
+ case INT_TYPE_AI3_DMA:
+ disable_dma(devpriv->dma);
+ case INT_TYPE_AI1_INT:
+ case INT_TYPE_AI3_INT:
+ outb(inb(dev->iobase + PCL816_CONTROL) & 0x73, dev->iobase + PCL816_CONTROL); /* Stop A/D */
+ comedi_udelay(1);
+ outb(0, dev->iobase + PCL816_CONTROL); /* Stop A/D */
+ outb(0xb0, dev->iobase + PCL816_CTRCTL); /* Stop pacer */
+ outb(0x70, dev->iobase + PCL816_CTRCTL);
+ outb(0, dev->iobase + PCL816_AD_LO);
+ inb(dev->iobase + PCL816_AD_LO);
+ inb(dev->iobase + PCL816_AD_HI);
+ outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
+ outb(0, dev->iobase + PCL816_CONTROL); /* Stop A/D */
+ devpriv->irq_blocked = 0;
+ devpriv->irq_was_now_closed = devpriv->int816_mode;
+ devpriv->int816_mode = 0;
+ devpriv->last_int_sub = s;
+// s->busy = 0;
+ break;
+ }
+ }
+
+ DEBUG(rt_printk("comedi: pcl816_ai_cancel() successful\n");
+ )
+ return 0;
+}
+
+/*
+==============================================================================
+ chech for PCL816
+*/
+static int pcl816_check(unsigned long iobase)
+{
+ outb(0x00, iobase + PCL816_MUX);
+ comedi_udelay(1);
+ if (inb(iobase + PCL816_MUX) != 0x00)
+ return 1; //there isn't card
+ outb(0x55, iobase + PCL816_MUX);
+ comedi_udelay(1);
+ if (inb(iobase + PCL816_MUX) != 0x55)
+ return 1; //there isn't card
+ outb(0x00, iobase + PCL816_MUX);
+ comedi_udelay(1);
+ outb(0x18, iobase + PCL816_CONTROL);
+ comedi_udelay(1);
+ if (inb(iobase + PCL816_CONTROL) != 0x18)
+ return 1; //there isn't card
+ return 0; // ok, card exist
+}
+
+/*
+==============================================================================
+ reset whole PCL-816 cards
+*/
+static void pcl816_reset(comedi_device * dev)
+{
+// outb (0, dev->iobase + PCL818_DA_LO); // DAC=0V
+// outb (0, dev->iobase + PCL818_DA_HI);
+// comedi_udelay (1);
+// outb (0, dev->iobase + PCL818_DO_HI); // DO=$0000
+// outb (0, dev->iobase + PCL818_DO_LO);
+// comedi_udelay (1);
+ outb(0, dev->iobase + PCL816_CONTROL);
+ outb(0, dev->iobase + PCL816_MUX);
+ outb(0, dev->iobase + PCL816_CLRINT);
+ outb(0xb0, dev->iobase + PCL816_CTRCTL); /* Stop pacer */
+ outb(0x70, dev->iobase + PCL816_CTRCTL);
+ outb(0x30, dev->iobase + PCL816_CTRCTL);
+ outb(0, dev->iobase + PCL816_RANGE);
+}
+
+/*
+==============================================================================
+ Start/stop pacer onboard pacer
+*/
+static void
+start_pacer(comedi_device * dev, int mode, unsigned int divisor1,
+ unsigned int divisor2)
+{
+ outb(0x32, dev->iobase + PCL816_CTRCTL);
+ outb(0xff, dev->iobase + PCL816_CTR0);
+ outb(0x00, dev->iobase + PCL816_CTR0);
+ comedi_udelay(1);
+ outb(0xb4, dev->iobase + PCL816_CTRCTL); // set counter 2 as mode 3
+ outb(0x74, dev->iobase + PCL816_CTRCTL); // set counter 1 as mode 3
+ comedi_udelay(1);
+
+ if (mode == 1) {
+ DPRINTK("mode %d, divisor1 %d, divisor2 %d\n", mode, divisor1,
+ divisor2);
+ outb(divisor2 & 0xff, dev->iobase + PCL816_CTR2);
+ outb((divisor2 >> 8) & 0xff, dev->iobase + PCL816_CTR2);
+ outb(divisor1 & 0xff, dev->iobase + PCL816_CTR1);
+ outb((divisor1 >> 8) & 0xff, dev->iobase + PCL816_CTR1);
+ }
+
+ /* clear pending interrupts (just in case) */
+// outb(0, dev->iobase + PCL816_CLRINT);
+}
+
+/*
+==============================================================================
+ Check if channel list from user is builded correctly
+ If it's ok, then program scan/gain logic
+*/
+static int
+check_and_setup_channel_list(comedi_device * dev, comedi_subdevice * s,
+ unsigned int *chanlist, int chanlen)
+{
+ unsigned int chansegment[16];
+ unsigned int i, nowmustbechan, seglen, segpos;
+
+ // correct channel and range number check itself comedi/range.c
+ if (chanlen < 1) {
+ comedi_error(dev, "range/channel list is empty!");
+ return 0;
+ }
+
+ if (chanlen > 1) {
+ chansegment[0] = chanlist[0]; // first channel is everytime ok
+ for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
+ // build part of chanlist
+ DEBUG(rt_printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
+ CR_RANGE(chanlist[i]));
+ )
+ if (chanlist[0] == chanlist[i])
+ break; // we detect loop, this must by finish
+ nowmustbechan =
+ (CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
+ if (nowmustbechan != CR_CHAN(chanlist[i])) {
+ // channel list isn't continous :-(
+ rt_printk
+ ("comedi%d: pcl816: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+ dev->minor, i, CR_CHAN(chanlist[i]),
+ nowmustbechan, CR_CHAN(chanlist[0]));
+ return 0;
+ }
+ chansegment[i] = chanlist[i]; // well, this is next correct channel in list
+ }
+
+ for (i = 0, segpos = 0; i < chanlen; i++) { // check whole chanlist
+ DEBUG(rt_printk("%d %d=%d %d\n",
+ CR_CHAN(chansegment[i % seglen]),
+ CR_RANGE(chansegment[i % seglen]),
+ CR_CHAN(chanlist[i]),
+ CR_RANGE(chanlist[i]));
+ )
+ if (chanlist[i] != chansegment[i % seglen]) {
+ rt_printk
+ ("comedi%d: pcl816: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
+ dev->minor, i, CR_CHAN(chansegment[i]),
+ CR_RANGE(chansegment[i]),
+ CR_AREF(chansegment[i]),
+ CR_CHAN(chanlist[i % seglen]),
+ CR_RANGE(chanlist[i % seglen]),
+ CR_AREF(chansegment[i % seglen]));
+ return 0; // chan/gain list is strange
+ }
+ }
+ } else {
+ seglen = 1;
+ }
+
+ devpriv->ai_act_chanlist_len = seglen;
+ devpriv->ai_act_chanlist_pos = 0;
+
+ for (i = 0; i < seglen; i++) { // store range list to card
+ devpriv->ai_act_chanlist[i] = CR_CHAN(chanlist[i]);
+ outb(CR_CHAN(chanlist[0]) & 0xf, dev->iobase + PCL816_MUX);
+ outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE); /* select gain */
+ }
+
+ comedi_udelay(1);
+
+ outb(devpriv->ai_act_chanlist[0] | (devpriv->ai_act_chanlist[seglen - 1] << 4), dev->iobase + PCL816_MUX); /* select channel interval to scan */
+
+ return 1; // we can serve this with MUX logic
+}
+
+#ifdef unused
+/*
+==============================================================================
+ Enable(1)/disable(0) periodic interrupts from RTC
+*/
+static int set_rtc_irq_bit(unsigned char bit)
+{
+ unsigned char val;
+ unsigned long flags;
+
+ if (bit == 1) {
+ RTC_timer_lock++;
+ if (RTC_timer_lock > 1)
+ return 0;
+ } else {
+ RTC_timer_lock--;
+ if (RTC_timer_lock < 0)
+ RTC_timer_lock = 0;
+ if (RTC_timer_lock > 0)
+ return 0;
+ }
+
+ save_flags(flags);
+ cli();
+ val = CMOS_READ(RTC_CONTROL);
+ if (bit) {
+ val |= RTC_PIE;
+ } else {
+ val &= ~RTC_PIE;
+ }
+ CMOS_WRITE(val, RTC_CONTROL);
+ CMOS_READ(RTC_INTR_FLAGS);
+ restore_flags(flags);
+ return 0;
+}
+#endif
+
+/*
+==============================================================================
+ Free any resources that we have claimed
+*/
+static void free_resources(comedi_device * dev)
+{
+ //rt_printk("free_resource()\n");
+ if (dev->private) {
+ pcl816_ai_cancel(dev, devpriv->sub_ai);
+ pcl816_reset(dev);
+ if (devpriv->dma)
+ free_dma(devpriv->dma);
+ if (devpriv->dmabuf[0])
+ free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
+ if (devpriv->dmabuf[1])
+ free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
+#ifdef unused
+ if (devpriv->rtc_irq)
+ comedi_free_irq(devpriv->rtc_irq, dev);
+ if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
+ if (devpriv->rtc_iobase)
+ release_region(devpriv->rtc_iobase,
+ devpriv->rtc_iosize);
+ }
+#endif
+ }
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (dev->iobase)
+ release_region(dev->iobase, this_board->io_range);
+ //rt_printk("free_resource() end\n");
+}
+
+/*
+==============================================================================
+
+ Initialization
+
+*/
+static int pcl816_attach(comedi_device * dev, comedi_devconfig * it)
+{
+ int ret;
+ unsigned long iobase;
+ unsigned int irq, dma;
+ unsigned long pages;
+ //int i;
+ comedi_subdevice *s;
+
+ /* claim our I/O space */
+ iobase = it->options[0];
+ printk("comedi%d: pcl816: board=%s, ioport=0x%03lx", dev->minor,
+ this_board->name, iobase);
+
+ if (!request_region(iobase, this_board->io_range, "pcl816")) {
+ rt_printk("I/O port conflict\n");
+ return -EIO;
+ }
+
+ dev->iobase = iobase;
+
+ if (pcl816_check(iobase)) {
+ rt_printk(", I cann't detect board. FAIL!\n");
+ return -EIO;
+ }
+
+ if ((ret = alloc_private(dev, sizeof(pcl816_private))) < 0)
+ return ret; /* Can't alloc mem */
+
+ /* set up some name stuff */
+ dev->board_name = this_board->name;
+
+ /* grab our IRQ */
+ irq = 0;
+ if (this_board->IRQbits != 0) { /* board support IRQ */
+ irq = it->options[1];
+ if (irq) { /* we want to use IRQ */
+ if (((1 << irq) & this_board->IRQbits) == 0) {
+ rt_printk
+ (", IRQ %u is out of allowed range, DISABLING IT",
+ irq);
+ irq = 0; /* Bad IRQ */
+ } else {
+ if (comedi_request_irq(irq, interrupt_pcl816, 0,
+ "pcl816", dev)) {
+ rt_printk
+ (", unable to allocate IRQ %u, DISABLING IT",
+ irq);
+ irq = 0; /* Can't use IRQ */
+ } else {
+ rt_printk(", irq=%u", irq);
+ }
+ }
+ }
+ }
+
+ dev->irq = irq;
+ if (irq) {
+ devpriv->irq_free = 1;
+ } /* 1=we have allocated irq */
+ else {
+ devpriv->irq_free = 0;
+ }
+ devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */
+ devpriv->int816_mode = 0; /* mode of irq */
+
+#ifdef unused
+ /* grab RTC for DMA operations */
+ devpriv->dma_rtc = 0;
+ if (it->options[2] > 0) { // we want to use DMA
+ if (RTC_lock == 0) {
+ if (!request_region(RTC_PORT(0), RTC_IO_EXTENT,
+ "pcl816 (RTC)"))
+ goto no_rtc;
+ }
+ devpriv->rtc_iobase = RTC_PORT(0);
+ devpriv->rtc_iosize = RTC_IO_EXTENT;
+ RTC_lock++;
+#ifdef UNTESTED_CODE
+ if (!comedi_request_irq(RTC_IRQ,
+ interrupt_pcl816_ai_mode13_dma_rtc, 0,
+ "pcl816 DMA (RTC)", dev)) {
+ devpriv->dma_rtc = 1;
+ devpriv->rtc_irq = RTC_IRQ;
+ rt_printk(", dma_irq=%u", devpriv->rtc_irq);
+ } else {
+ RTC_lock--;
+ if (RTC_lock == 0) {
+ if (devpriv->rtc_iobase)
+ release_region(devpriv->rtc_iobase,
+ devpriv->rtc_iosize);
+ }
+ devpriv->rtc_iobase = 0;
+ devpriv->rtc_iosize = 0;
+ }
+#else
+ printk("pcl816: RTC code missing");
+#endif
+
+ }
+
+ no_rtc:
+#endif
+ /* grab our DMA */
+ dma = 0;
+ devpriv->dma = dma;
+ if ((devpriv->irq_free == 0) && (devpriv->dma_rtc == 0))
+ goto no_dma; /* if we haven't IRQ, we can't use DMA */
+
+ if (this_board->DMAbits != 0) { /* board support DMA */
+ dma = it->options[2];
+ if (dma < 1)
+ goto no_dma; /* DMA disabled */
+
+ if (((1 << dma) & this_board->DMAbits) == 0) {
+ rt_printk(", DMA is out of allowed range, FAIL!\n");
+ return -EINVAL; /* Bad DMA */
+ }
+ ret = request_dma(dma, "pcl816");
+ if (ret) {
+ rt_printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ return -EBUSY; /* DMA isn't free */
+ }
+
+ devpriv->dma = dma;
+ rt_printk(", dma=%u", dma);
+ pages = 2; /* we need 16KB */
+ devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
+
+ if (!devpriv->dmabuf[0]) {
+ rt_printk(", unable to allocate DMA buffer, FAIL!\n");
+ /* maybe experiment with try_to_free_pages() will help .... */
+ return -EBUSY; /* no buffer :-( */
+ }
+ devpriv->dmapages[0] = pages;
+ devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
+ devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
+ //rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE);
+
+ if (devpriv->dma_rtc == 0) { // we must do duble buff :-(
+ devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
+ if (!devpriv->dmabuf[1]) {
+ rt_printk
+ (", unable to allocate DMA buffer, FAIL!\n");
+ return -EBUSY;
+ }
+ devpriv->dmapages[1] = pages;
+ devpriv->hwdmaptr[1] =
+ virt_to_bus((void *)devpriv->dmabuf[1]);
+ devpriv->hwdmasize[1] = (1 << pages) * PAGE_SIZE;
+ }
+ }
+
+ no_dma:
+
+/* if (this_board->n_aochan > 0)
+ subdevs[1] = COMEDI_SUBD_AO;
+ if (this_board->n_dichan > 0)
+ subdevs[2] = COMEDI_SUBD_DI;
+ if (this_board->n_dochan > 0)
+ subdevs[3] = COMEDI_SUBD_DO;
+*/
+ if ((ret = alloc_subdevices(dev, 1)) < 0)
+ return ret;
+
+ s = dev->subdevices + 0;
+ if (this_board->n_aichan > 0) {
+ s->type = COMEDI_SUBD_AI;
+ devpriv->sub_ai = s;
+ dev->read_subdev = s;
+ s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
+ s->n_chan = this_board->n_aichan;
+ s->subdev_flags |= SDF_DIFF;
+ //printk (", %dchans DIFF DAC - %d", s->n_chan, i);
+ s->maxdata = this_board->ai_maxdata;
+ s->len_chanlist = this_board->ai_chanlist;
+ s->range_table = this_board->ai_range_type;
+ s->cancel = pcl816_ai_cancel;
+ s->do_cmdtest = pcl816_ai_cmdtest;
+ s->do_cmd = pcl816_ai_cmd;
+ s->poll = pcl816_ai_poll;
+ s->insn_read = pcl816_ai_insn_read;
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
+#if 0
+case COMEDI_SUBD_AO:
+ s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
+ s->n_chan = this_board->n_aochan;
+ s->maxdata = this_board->ao_maxdata;
+ s->len_chanlist = this_board->ao_chanlist;
+ s->range_table = this_board->ao_range_type;
+ break;
+
+case COMEDI_SUBD_DI:
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = this_board->n_dichan;
+ s->maxdata = 1;
+ s->len_chanlist = this_board->n_dichan;
+ s->range_table = &range_digital;
+ break;
+
+case COMEDI_SUBD_DO:
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = this_board->n_dochan;
+ s->maxdata = 1;
+ s->len_chanlist = this_board->n_dochan;
+ s->range_table = &range_digital;
+ break;
+#endif
+
+ pcl816_reset(dev);
+
+ rt_printk("\n");
+
+ return 0;
+}
+
+/*
+==============================================================================
+ Removes device
+ */
+static int pcl816_detach(comedi_device * dev)
+{
+ DEBUG(rt_printk("comedi%d: pcl816: remove\n", dev->minor);
+ )
+ free_resources(dev);
+#ifdef unused
+ if (devpriv->dma_rtc)
+ RTC_lock--;
+#endif
+ return 0;
+}