arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs

Annotate the EMDIO2 node and describe the other 4 10GBASER PHYs found on
the LS2088ARDB board. Also, add phy-handles for DPMACs 5-8 to their
associated PHY.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts

@@ -43,6 +43,26 @@ &dpmac4 {
 	phy-connection-type = "10gbase-r";
 };
 
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
 &emdio1 {
 	status = "okay";
 
@@ -66,3 +86,27 @@ mdio1_phy4: ethernet-phy@13 {
 		reg = <0x13>;
 	};
 };
+
+&emdio2 {
+	status = "okay";
+
+	mdio2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x3>;
+	};
+};