net: phy: marvell: Enable interrupt function on LED2 pin

The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs
to be configured to be usable as interrupt not only when WOL is enabled,
but whenever we rely on interrupts from the PHY.
Signed-off-by: Esben Haabendal <eha@deif.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell.c

@@ -828,6 +828,22 @@ static int m88e1121_config_init(struct phy_device *phydev)
 	return marvell_config_init(phydev);
 }
 
+static int m88e1318_config_init(struct phy_device *phydev)
+{
+	if (phy_interrupt_is_valid(phydev)) {
+		int err = phy_modify_paged(
+			phydev, MII_MARVELL_LED_PAGE,
+			MII_88E1318S_PHY_LED_TCR,
+			MII_88E1318S_PHY_LED_TCR_FORCE_INT,
+			MII_88E1318S_PHY_LED_TCR_INTn_ENABLE |
+			MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
+		if (err < 0)
+			return err;
+	}
+
+	return m88e1121_config_init(phydev);
+}
+
 static int m88e1510_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -870,7 +886,7 @@ static int m88e1510_config_init(struct phy_device *phydev)
 		phydev->advertising &= ~pause;
 	}
 
-	return m88e1121_config_init(phydev);
+	return m88e1318_config_init(phydev);
 }
 
 static int m88e1118_config_aneg(struct phy_device *phydev)
@@ -2086,7 +2102,7 @@ static struct phy_driver marvell_drivers[] = {
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
-		.config_init = &m88e1121_config_init,
+		.config_init = &m88e1318_config_init,
 		.config_aneg = &m88e1318_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,