Bluetooth: qca: add support for WCN7850

Add support for the WCN7850 Bluetooth chipset.

Tested on the SM8550 QRD platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

drivers/bluetooth/btqca.c

@@ -631,6 +631,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/hpbtfw%02x.tlv", rom_ver);
 		break;
+	case QCA_WCN7850:
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/hmtbtfw%02x.tlv", rom_ver);
+		break;
 	default:
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
@@ -679,6 +683,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 			snprintf(config.fwname, sizeof(config.fwname),
 				 "qca/hpnv%02x.bin", rom_ver);
 			break;
+		case QCA_WCN7850:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/hmtnv%02x.bin", rom_ver);
+			break;
 
 		default:
 			snprintf(config.fwname, sizeof(config.fwname),
@@ -697,6 +705,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	case QCA_QCA6390:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		err = qca_disable_soc_logging(hdev);
 		if (err < 0)
 			return err;
@@ -731,6 +740,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	case QCA_WCN3991:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		/* get fw build info */
 		err = qca_read_fw_build_info(hdev);
 		if (err < 0)

drivers/bluetooth/btqca.h

@@ -149,6 +149,7 @@ enum qca_btsoc_type {
 	QCA_QCA6390,
 	QCA_WCN6750,
 	QCA_WCN6855,
+	QCA_WCN7850,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)

drivers/bluetooth/hci_qca.c

@@ -1357,6 +1357,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		usleep_range(1000, 10000);
 		break;
 
@@ -1442,6 +1443,7 @@ static int qca_check_speeds(struct hci_uart *hu)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1483,6 +1485,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		case QCA_WCN3998:
 		case QCA_WCN6750:
 		case QCA_WCN6855:
+		case QCA_WCN7850:
 			hci_uart_set_flow_control(hu, true);
 			break;
 
@@ -1516,6 +1519,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		case QCA_WCN3998:
 		case QCA_WCN6750:
 		case QCA_WCN6855:
+		case QCA_WCN7850:
 			hci_uart_set_flow_control(hu, false);
 			break;
 
@@ -1783,6 +1787,7 @@ static int qca_power_on(struct hci_dev *hdev)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		ret = qca_regulator_init(hu);
 		break;
 
@@ -1851,6 +1856,10 @@ static int qca_setup(struct hci_uart *hu)
 		soc_name = "wcn6855";
 		break;
 
+	case QCA_WCN7850:
+		soc_name = "wcn7850";
+		break;
+
 	default:
 		soc_name = "ROME/QCA6390";
 	}
@@ -1872,6 +1881,7 @@ static int qca_setup(struct hci_uart *hu)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hci_set_aosp_capable(hdev);
 
@@ -1901,6 +1911,7 @@ static int qca_setup(struct hci_uart *hu)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		break;
 
 	default:
@@ -2057,6 +2068,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
 	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
 };
 
+static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
+	.soc_type = QCA_WCN7850,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 5000 },
+		{ "vddaon", 26000 },
+		{ "vdddig", 126000 },
+		{ "vddrfa0p8", 102000 },
+		{ "vddrfa1p2", 257000 },
+		{ "vddrfa1p9", 302000 },
+	},
+	.num_vregs = 6,
+	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -2240,6 +2265,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -2269,7 +2295,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 					       GPIOD_IN);
 		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
 		    (data->soc_type == QCA_WCN6750 ||
-		     data->soc_type == QCA_WCN6855))
+		     data->soc_type == QCA_WCN6855 ||
+		     data->soc_type == QCA_WCN7850))
 			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
 
 		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2348,6 +2375,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		if (power->vregs_on) {
 			qca_power_shutdown(&qcadev->serdev_hu);
 			break;
@@ -2540,6 +2568,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
 	{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
+	{ .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);