usb: dwc2: Move exit hibernation to dwc2_port_resume() function

This move is done to call hibernation exit handler in
"dwc2_port_resume()" function when core receives port resume.
Otherwise it could be confusing to exit hibernation in
"dwc2_hcd_hub_control()" function but other power saving modes
in "dwc2_port_resume()" function.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124755.E47F3A005D@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc2/hcd.c

@@ -3383,6 +3383,11 @@ int dwc2_port_resume(struct dwc2_hsotg *hsotg)
 				"exit partial_power_down failed.\n");
 		break;
 	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+		/* Exit host hibernation. */
+		ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		if (ret)
+			dev_err(hsotg->dev, "exit hibernation failed.\n");
+		break;
 	case DWC2_POWER_DOWN_PARAM_NONE:
 		/*
 		 * If not hibernation nor partial power down are supported,
@@ -3446,12 +3451,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 			dev_dbg(hsotg->dev,
 				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
 
-			if (hsotg->bus_suspended) {
-				if (hsotg->hibernated)
-					dwc2_exit_hibernation(hsotg, 0, 0, 1);
-				else
-					dwc2_port_resume(hsotg);
-			}
+			if (hsotg->bus_suspended)
+				retval = dwc2_port_resume(hsotg);
 			break;
 
 		case USB_PORT_FEAT_POWER: