ARM: sun8i: a83t: Drop leading zeroes from device node addresses

Kbuild now complains about leading zeroes in the address portion of
device node names.

Get rid of them all, except for the uart device node. U-boot currently
hard codes the device node path. We can remove the leading zero for
the uart once we teach U-boot to use the aliases or stdout-path
property.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -162,7 +162,7 @@ soc {
 		#size-cells = <1>;
 		ranges;
 
-		pio: pinctrl@01c20800 {
+		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
@@ -193,7 +193,7 @@ uart0_pf_pins: uart0_pf_pins {
 			};
 		};
 
-		timer@01c20c00 {
+		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -201,7 +201,7 @@ timer@01c20c00 {
 			clocks = <&osc24M>;
 		};
 
-		watchdog@01c20ca0 {
+		watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -218,7 +218,7 @@ uart0: serial@01c28000 {
 			status = "disabled";
 		};
 
-		gic: interrupt-controller@01c81000 {
+		gic: interrupt-controller@1c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x2000>,