ARM: dts: imx23: introduce mmc0_sck_cfg

The Olimex Olinuxino board has a user led connected to SSP1_DETECT.
But since this pin is listed in mmc0_pins_fixup, it is already claimed
by MMC driver and this results in this error during boot:

[    1.390000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already
  requested by 80010000.spi; cannot claim for leds
[    1.400000] imx23-pinctrl 80018000.pinctrl: pin-65 (leds) status -22
[    1.410000] imx23-pinctrl 80018000.pinctrl: could not request pin 65
   (SSP1_DETECT) from group led_gpio2_1.0  on device 80018000.pinctrl
[    1.420000] leds-gpio leds: Error applying setting, reverse things back
[    1.430000] leds-gpio: probe of leds failed with error -22

This fix it, introduce mmc0_sck_cfg and switch the Olinuxino board to it.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -23,7 +23,7 @@ apbh@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
 				bus-width = <4>;
 				broken-cd;
 				status = "okay";

arch/arm/boot/dts/imx23.dtsi

@@ -267,6 +267,14 @@ MX23_PAD_SSP1_SCK__SSP1_SCK
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				mmc1_4bit_pins_a: mmc1-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <