Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: sysfs: fix printk warnings
  PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
  PCI: read current power state at enable time
  PCI: fix size checks for mmap() on /proc/bus/pci files
  x86/PCI: coalesce overlapping host bridge windows
  PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area

arch/x86/pci/acpi.c

@@ -138,7 +138,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 	unsigned long flags;
-	struct resource *root, *conflict;
 	u64 start, end;
 
 	status = resource_to_addr(acpi_res, &addr);
@@ -146,12 +145,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
-		root = &iomem_resource;
 		flags = IORESOURCE_MEM;
 		if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
 			flags |= IORESOURCE_PREFETCH;
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
-		root = &ioport_resource;
 		flags = IORESOURCE_IO;
 	} else
 		return AE_OK;
@@ -172,14 +169,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 	}
 
-	conflict = insert_resource_conflict(root, res);
-	if (conflict) {
-		dev_err(&info->bridge->dev,
-			"address space collision: host bridge window %pR "
-			"conflicts with %s %pR\n",
-			res, conflict->name, conflict);
-	} else {
-		pci_bus_add_resource(info->bus, res, 0);
 	info->res_num++;
 	if (addr.translation_offset)
 		dev_info(&info->bridge->dev, "host bridge window %pR "
@@ -187,10 +176,83 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 			 res, res->start - addr.translation_offset,
 			 res->end - addr.translation_offset);
 	else
+		dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
+	return AE_OK;
+}
+
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+	if (res->start <= point && point <= res->end)
+		return true;
+	return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+	int i, j;
+	struct resource *res1, *res2;
+
+	for (i = 0; i < info->res_num; i++) {
+		res1 = &info->res[i];
+		if (!(res1->flags & type))
+			continue;
+
+		for (j = i + 1; j < info->res_num; j++) {
+			res2 = &info->res[j];
+			if (!(res2->flags & type))
+				continue;
+
+			/*
+			 * I don't like throwing away windows because then
+			 * our resources no longer match the ACPI _CRS, but
+			 * the kernel resource tree doesn't allow overlaps.
+			 */
+			if (resource_contains(res1, res2->start) ||
+			    resource_contains(res1, res2->end) ||
+			    resource_contains(res2, res1->start) ||
+			    resource_contains(res2, res1->end)) {
+				res1->start = min(res1->start, res2->start);
+				res1->end = max(res1->end, res2->end);
 				dev_info(&info->bridge->dev,
-				 "host bridge window %pR\n", res);
+					 "host bridge window expanded to %pR; %pR ignored\n",
+					 res1, res2);
+				res2->flags = 0;
+			}
+		}
+	}
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+	int i;
+	struct resource *res, *root, *conflict;
+
+	if (!pci_use_crs)
+		return;
+
+	coalesce_windows(info, IORESOURCE_MEM);
+	coalesce_windows(info, IORESOURCE_IO);
+
+	for (i = 0; i < info->res_num; i++) {
+		res = &info->res[i];
+
+		if (res->flags & IORESOURCE_MEM)
+			root = &iomem_resource;
+		else if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
+		else
+			continue;
+
+		conflict = insert_resource_conflict(root, res);
+		if (conflict)
+			dev_err(&info->bridge->dev,
+				"address space collision: host bridge window %pR "
+				"conflicts with %s %pR\n",
+				res, conflict->name, conflict);
+		else
+			pci_bus_add_resource(info->bus, res, 0);
 	}
-	return AE_OK;
 }
 
 static void
@@ -224,6 +286,7 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
+	add_resources(&info);
 	return;
 
 name_alloc_fail:

drivers/pci/bus.c

@@ -64,17 +64,57 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 	}
 }
 
+static bool pci_bus_resource_better(struct resource *res1, bool pos1,
+				    struct resource *res2, bool pos2)
+{
+	/* If exactly one is positive decode, always prefer that one */
+	if (pos1 != pos2)
+		return pos1 ? true : false;
+
+	/* Prefer the one that contains the highest address */
+	if (res1->end != res2->end)
+		return (res1->end > res2->end) ? true : false;
+
+	/* Otherwise, prefer the one with highest "center of gravity" */
+	if (res1->start != res2->start)
+		return (res1->start > res2->start) ? true : false;
+
+	/* Otherwise, choose one arbitrarily (but consistently) */
+	return (res1 > res2) ? true : false;
+}
+
+static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res)
+{
+	struct pci_bus_resource *bus_res;
+
+	/*
+	 * This relies on the fact that pci_bus.resource[] refers to P2P or
+	 * CardBus bridge base/limit registers, which are always positively
+	 * decoded.  The pci_bus.resources list contains host bridge or
+	 * subtractively decoded resources.
+	 */
+	list_for_each_entry(bus_res, &bus->resources, list) {
+		if (bus_res->res == res)
+			return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ?
+				false : true;
+	}
+	return true;
+}
+
 /*
- * Find the highest-address bus resource below the cursor "res".  If the
- * cursor is NULL, return the highest resource.
+ * Find the next-best bus resource after the cursor "res".  If the cursor is
+ * NULL, return the best resource.  "Best" means that we prefer positive
+ * decode regions over subtractive decode, then those at higher addresses.
  */
 static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
 						   unsigned int type,
 						   struct resource *res)
 {
+	bool res_pos, r_pos, prev_pos = false;
 	struct resource *r, *prev = NULL;
 	int i;
 
+	res_pos = pci_bus_resource_positive(bus, res);
 	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
@@ -82,26 +122,14 @@ static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
 		if ((r->flags & IORESOURCE_TYPE_BITS) != type)
 			continue;
 
-		/* If this resource is at or past the cursor, skip it */
-		if (res) {
-			if (r == res)
-				continue;
-			if (r->end > res->end)
-				continue;
-			if (r->end == res->end && r->start > res->start)
-				continue;
-		}
-
-		if (!prev)
-			prev = r;
-
-		/*
-		 * A small resource is higher than a large one that ends at
-		 * the same address.
-		 */
-		if (r->end > prev->end ||
-		    (r->end == prev->end && r->start > prev->start))
+		r_pos = pci_bus_resource_positive(bus, r);
+		if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) {
+			if (!prev || pci_bus_resource_better(r, r_pos,
+							     prev, prev_pos)) {
 				prev = r;
+				prev_pos = r_pos;
+			}
+		}
 	}
 
 	return prev;

drivers/pci/hotplug/ibmphp_ebda.c

@@ -276,6 +276,12 @@ int __init ibmphp_access_ebda (void)
 
 	for (;;) {
 		offset = next_offset;
+
+		/* Make sure what we read is still in the mapped section */
+		if (WARN(offset > (ebda_sz * 1024 - 4),
+			 "ibmphp_ebda: next read is beyond ebda_sz\n"))
+			break;
+
 		next_offset = readw (io_mem + offset);	/* offset of next blk */
 
 		offset += 2;

drivers/pci/pci-sysfs.c

@@ -705,17 +705,21 @@ void pci_remove_legacy_files(struct pci_bus *b)
 
 #ifdef HAVE_PCI_MMAP
 
-int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
+		  enum pci_mmap_api mmap_api)
 {
-	unsigned long nr, start, size;
+	unsigned long nr, start, size, pci_start;
 
+	if (pci_resource_len(pdev, resno) == 0)
+		return 0;
 	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	if (start < size && size - start >= nr)
+	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
+			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+	if (start >= pci_start && start < pci_start + size &&
+			start + nr <= pci_start + size)
 		return 1;
-	WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
-		current->comm, start, start+nr, pci_name(pdev), resno, size);
 	return 0;
 }
 
@@ -745,8 +749,15 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
-	if (!pci_mmap_fits(pdev, i, vma))
+	if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+		WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
+			"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
+			current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
+			pci_name(pdev), i,
+			(u64)pci_resource_start(pdev, i),
+			(u64)pci_resource_len(pdev, i));
 		return -EINVAL;
+	}
 
 	/* pci_mmap_page_range() expects the same kind of entry as coming
 	 * from /proc/bus/pci/ which is a "user visible" value. If this is

drivers/pci/pci.c

@@ -1007,6 +1007,18 @@ static int __pci_enable_device_flags(struct pci_dev *dev,
 	int err;
 	int i, bars = 0;
 
+	/*
+	 * Power state could be unknown at this point, either due to a fresh
+	 * boot or a device removal call.  So get the current power state
+	 * so that things like MSI message writing will behave as expected
+	 * (e.g. if the device really is in D0 at enable time).
+	 */
+	if (dev->pm_cap) {
+		u16 pmcsr;
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+	}
+
 	if (atomic_add_return(1, &dev->enable_cnt) > 1)
 		return 0;		/* already enabled */
 

drivers/pci/pci.h

@@ -22,8 +22,13 @@ extern void pci_remove_firmware_label_files(struct pci_dev *pdev);
 #endif
 extern void pci_cleanup_rom(struct pci_dev *dev);
 #ifdef HAVE_PCI_MMAP
+enum pci_mmap_api {
+	PCI_MMAP_SYSFS,	/* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
+	PCI_MMAP_PROCFS	/* mmap on /proc/bus/pci/<BDF> */
+};
 extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
-			 struct vm_area_struct *vma);
+			 struct vm_area_struct *vmai,
+			 enum pci_mmap_api mmap_api);
 #endif
 int pci_probe_reset_function(struct pci_dev *dev);
 

drivers/pci/proc.c

@@ -257,7 +257,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
 
 	/* Make sure the caller is mapping a real resource for this device */
 	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (pci_mmap_fits(dev, i, vma))
+		if (pci_mmap_fits(dev, i, vma,  PCI_MMAP_PROCFS))
 			break;
 	}