Merge tag 'at91-fixes-6.1' of...

Merge tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

AT91 fixes for 6.1

It contains:
- signal name fix for a pin on SAMA7G5
- memory self-refresh fix for SAMA7G5 by avoid soft resetting AC
  DLL which can introduce glitches in RAM controller and lead to
  unexpected behavior
- led support fix for lan966x-pcb8291 board by enabling sgpio node

* tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: pm: avoid soft resetting AC DLL
  ARM: dts: lan966x: Enable sgpio on pcb8291
  ARM: dts: at91: sama7g5: fix signal name of pin PB2

Link: https://lore.kernel.org/r/20221110115411.180876-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/lan966x-pcb8291.dts

@@ -69,6 +69,12 @@ can0_b_pins:  can0-b-pins {
 		pins = "GPIO_35", "GPIO_36";
 		function = "can0_b";
 	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
 };
 
 &can0 {
@@ -118,6 +124,20 @@ &serdes {
 	status = "okay";
 };
 
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
 &switch {
 	status = "okay";
 };

arch/arm/boot/dts/sama7g5-pinfunc.h

@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)

arch/arm/mach-at91/pm_suspend.S

@@ -169,10 +169,15 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
 
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
 	/* Disable DX DLLs. */
 	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
 	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS

include/soc/at91/sama7-ddr.h

@@ -26,7 +26,10 @@
 #define	DDR3PHY_PGSR				(0x0C)		/* DDR3PHY PHY General Status Register */
 #define		DDR3PHY_PGSR_IDONE		(1 << 0)	/* Initialization Done */
 
-#define DDR3PHY_ACIOCR				(0x24)		/*  DDR3PHY AC I/O Configuration Register */
+#define	DDR3PHY_ACDLLCR				(0x14)		/* DDR3PHY AC DLL Control Register */
+#define		DDR3PHY_ACDLLCR_DLLSRST		(1 << 30)	/* DLL Soft Reset */
+
+#define DDR3PHY_ACIOCR				(0x24)		/* DDR3PHY AC I/O Configuration Register */
 #define		DDR3PHY_ACIOCR_CSPDD_CS0	(1 << 18)	/* CS#[0] Power Down Driver */
 #define		DDR3PHY_ACIOCR_CKPDD_CK0	(1 << 8)	/* CK[0] Power Down Driver */
 #define		DDR3PHY_ACIORC_ACPDD		(1 << 3)	/* AC Power Down Driver */