Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (40 commits)
  mfd: Fix incorrect kfree(i2c) in wm8994-core i2c_driver probe
  mfd: Fix incorrect kfree(i2c) in wm831x-core i2c_driver probe
  mfd: Fix incorrect kfree(i2c) in tps6507x i2c_driver probe
  mfd: Add TPS6586x driver
  mfd: Use macros instead of some constant magic numbers for menelaus
  mfd: Fix menelaus mmc slot 2 misconfiguration
  mfd: Missing slab.h includes
  mfd: Fix wrong wm8350-core kfree in error path
  mfd: Fix wm8994_device_init() return value
  mfd: Avoid calling platform_device_put() twice in ucb1400 probe error path
  mfd: Annotate tc6387xb probe/remove routines with __devinit/__devexit
  mfd: Fix tc6387xb resource reclaim
  mfd: Fix wrong goto labels for tc6393xb error handling
  mfd: Get rid of now unused mc13783 private header
  hwmon: Don't access struct mc13783 directly from mc13783-adc
  mfd: New mc13783 function exposing flags
  mfd: Check jz4740-adc kmalloc() result
  mfd: Fix jz4740-adc resource reclaim in probe error path
  mfd: Add WM8321 support
  mfd: Add stmpe auto sleep feature
  ...

drivers/gpio/Kconfig

@@ -206,6 +206,13 @@ config GPIO_SX150X
 	  8 bits:  sx1508q
 	  16 bits: sx1509q
 
+config GPIO_STMPE
+	bool "STMPE GPIOs"
+	depends on MFD_STMPE
+	help
+	  This enables support for the GPIOs found on the STMPE I/O
+	  Expanders.
+
 config GPIO_TC35892
 	bool "TC35892 GPIOs"
 	depends on MFD_TC35892

drivers/gpio/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
 obj-$(CONFIG_GPIO_PL061)	+= pl061.o
+obj-$(CONFIG_GPIO_STMPE)	+= stmpe-gpio.o
 obj-$(CONFIG_GPIO_TC35892)	+= tc35892-gpio.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= timbgpio.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o

drivers/gpio/stmpe-gpio.c

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stmpe.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_RE, REG_FE, REG_IE };
+
+#define CACHE_NR_REGS	3
+#define CACHE_NR_BANKS	(STMPE_NR_GPIOS / 8)
+
+struct stmpe_gpio {
+	struct gpio_chip chip;
+	struct stmpe *stmpe;
+	struct device *dev;
+	struct mutex irq_lock;
+
+	int irq_base;
+
+	/* Caches of interrupt control registers for bus_lock */
+	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static inline struct stmpe_gpio *to_stmpe_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct stmpe_gpio, chip);
+}
+
+static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8);
+	u8 mask = 1 << (offset % 8);
+	int ret;
+
+	ret = stmpe_reg_read(stmpe, reg);
+	if (ret < 0)
+		return ret;
+
+	return ret & mask;
+}
+
+static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
+	u8 reg = stmpe->regs[which] - (offset / 8);
+	u8 mask = 1 << (offset % 8);
+
+	stmpe_reg_write(stmpe, reg, mask);
+}
+
+static int stmpe_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
+	u8 mask = 1 << (offset % 8);
+
+	stmpe_gpio_set(chip, offset, val);
+
+	return stmpe_set_bits(stmpe, reg, mask, mask);
+}
+
+static int stmpe_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
+	u8 mask = 1 << (offset % 8);
+
+	return stmpe_set_bits(stmpe, reg, mask, 0);
+}
+
+static int stmpe_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+
+	return stmpe_gpio->irq_base + offset;
+}
+
+static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+
+	return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "stmpe",
+	.owner			= THIS_MODULE,
+	.direction_input	= stmpe_gpio_direction_input,
+	.get			= stmpe_gpio_get,
+	.direction_output	= stmpe_gpio_direction_output,
+	.set			= stmpe_gpio_set,
+	.to_irq			= stmpe_gpio_to_irq,
+	.request		= stmpe_gpio_request,
+	.can_sleep		= 1,
+};
+
+static int stmpe_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+	int offset = irq - stmpe_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+
+	if (type == IRQ_TYPE_EDGE_RISING)
+		stmpe_gpio->regs[REG_RE][regoffset] |= mask;
+	else
+		stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_EDGE_FALLING)
+		stmpe_gpio->regs[REG_FE][regoffset] |= mask;
+	else
+		stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
+
+	return 0;
+}
+
+static void stmpe_gpio_irq_lock(unsigned int irq)
+{
+	struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+
+	mutex_lock(&stmpe_gpio->irq_lock);
+}
+
+static void stmpe_gpio_irq_sync_unlock(unsigned int irq)
+{
+	struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
+	static const u8 regmap[] = {
+		[REG_RE]	= STMPE_IDX_GPRER_LSB,
+		[REG_FE]	= STMPE_IDX_GPFER_LSB,
+		[REG_IE]	= STMPE_IDX_IEGPIOR_LSB,
+	};
+	int i, j;
+
+	for (i = 0; i < CACHE_NR_REGS; i++) {
+		for (j = 0; j < num_banks; j++) {
+			u8 old = stmpe_gpio->oldregs[i][j];
+			u8 new = stmpe_gpio->regs[i][j];
+
+			if (new == old)
+				continue;
+
+			stmpe_gpio->oldregs[i][j] = new;
+			stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new);
+		}
+	}
+
+	mutex_unlock(&stmpe_gpio->irq_lock);
+}
+
+static void stmpe_gpio_irq_mask(unsigned int irq)
+{
+	struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+	int offset = irq - stmpe_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void stmpe_gpio_irq_unmask(unsigned int irq)
+{
+	struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+	int offset = irq - stmpe_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	stmpe_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static struct irq_chip stmpe_gpio_irq_chip = {
+	.name			= "stmpe-gpio",
+	.bus_lock		= stmpe_gpio_irq_lock,
+	.bus_sync_unlock	= stmpe_gpio_irq_sync_unlock,
+	.mask			= stmpe_gpio_irq_mask,
+	.unmask			= stmpe_gpio_irq_unmask,
+	.set_type		= stmpe_gpio_irq_set_type,
+};
+
+static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
+{
+	struct stmpe_gpio *stmpe_gpio = dev;
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
+	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
+	u8 status[num_banks];
+	int ret;
+	int i;
+
+	ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < num_banks; i++) {
+		int bank = num_banks - i - 1;
+		unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
+		unsigned int stat = status[i];
+
+		stat &= enabled;
+		if (!stat)
+			continue;
+
+		while (stat) {
+			int bit = __ffs(stat);
+			int line = bank * 8 + bit;
+
+			handle_nested_irq(stmpe_gpio->irq_base + line);
+			stat &= ~(1 << bit);
+		}
+
+		stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
+		stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
+				status[i]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+{
+	int base = stmpe_gpio->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
+		set_irq_chip_data(irq, stmpe_gpio);
+		set_irq_chip_and_handler(irq, &stmpe_gpio_irq_chip,
+					 handle_simple_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	return 0;
+}
+
+static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
+{
+	int base = stmpe_gpio->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip_and_handler(irq, NULL, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct stmpe_gpio_platform_data *pdata;
+	struct stmpe_gpio *stmpe_gpio;
+	int ret;
+	int irq;
+
+	pdata = stmpe->pdata->gpio;
+	if (!pdata)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
+	if (!stmpe_gpio)
+		return -ENOMEM;
+
+	mutex_init(&stmpe_gpio->irq_lock);
+
+	stmpe_gpio->dev = &pdev->dev;
+	stmpe_gpio->stmpe = stmpe;
+
+	stmpe_gpio->chip = template_chip;
+	stmpe_gpio->chip.ngpio = stmpe->num_gpios;
+	stmpe_gpio->chip.dev = &pdev->dev;
+	stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+
+	stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
+	if (ret)
+		return ret;
+
+	ret = stmpe_gpio_irq_init(stmpe_gpio);
+	if (ret)
+		goto out_free;
+
+	ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT,
+				   "stmpe-gpio", stmpe_gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+		goto out_removeirq;
+	}
+
+	ret = gpiochip_add(&stmpe_gpio->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+		goto out_freeirq;
+	}
+
+	if (pdata && pdata->setup)
+		pdata->setup(stmpe, stmpe_gpio->chip.base);
+
+	platform_set_drvdata(pdev, stmpe_gpio);
+
+	return 0;
+
+out_freeirq:
+	free_irq(irq, stmpe_gpio);
+out_removeirq:
+	stmpe_gpio_irq_remove(stmpe_gpio);
+out_free:
+	kfree(stmpe_gpio);
+	return ret;
+}
+
+static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
+{
+	struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	struct stmpe_gpio_platform_data *pdata = stmpe->pdata->gpio;
+	int irq = platform_get_irq(pdev, 0);
+	int ret;
+
+	if (pdata && pdata->remove)
+		pdata->remove(stmpe, stmpe_gpio->chip.base);
+
+	ret = gpiochip_remove(&stmpe_gpio->chip);
+	if (ret < 0) {
+		dev_err(stmpe_gpio->dev,
+			"unable to remove gpiochip: %d\n", ret);
+		return ret;
+	}
+
+	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
+
+	free_irq(irq, stmpe_gpio);
+	stmpe_gpio_irq_remove(stmpe_gpio);
+	platform_set_drvdata(pdev, NULL);
+	kfree(stmpe_gpio);
+
+	return 0;
+}
+
+static struct platform_driver stmpe_gpio_driver = {
+	.driver.name	= "stmpe-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= stmpe_gpio_probe,
+	.remove		= __devexit_p(stmpe_gpio_remove),
+};
+
+static int __init stmpe_gpio_init(void)
+{
+	return platform_driver_register(&stmpe_gpio_driver);
+}
+subsys_initcall(stmpe_gpio_init);
+
+static void __exit stmpe_gpio_exit(void)
+{
+	platform_driver_unregister(&stmpe_gpio_driver);
+}
+module_exit(stmpe_gpio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx GPIO driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");

drivers/gpio/wm831x-gpio.c

@@ -108,6 +108,37 @@ static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	return wm831x->irq_base + WM831X_IRQ_GPIO_1 + offset;
 }
 
+static int wm831x_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
+				    unsigned debounce)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int reg = WM831X_GPIO1_CONTROL + offset;
+	int ret, fn;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & WM831X_GPN_FN_MASK) {
+	case 0:
+	case 1:
+		break;
+	default:
+		/* Not in GPIO mode */
+		return -EBUSY;
+	}
+
+	if (debounce >= 32 && debounce <= 64)
+		fn = 0;
+	else if (debounce >= 4000 && debounce <= 8000)
+		fn = 1;
+	else
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn);
+}
+
 #ifdef CONFIG_DEBUG_FS
 static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
@@ -208,6 +239,7 @@ static struct gpio_chip template_chip = {
 	.direction_output	= wm831x_gpio_direction_out,
 	.set			= wm831x_gpio_set,
 	.to_irq			= wm831x_gpio_to_irq,
+	.set_debounce		= wm831x_gpio_set_debounce,
 	.dbg_show		= wm831x_gpio_dbg_show,
 	.can_sleep		= 1,
 };

drivers/hwmon/mc13783-adc.c

@@ -18,7 +18,7 @@
  * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#include <linux/mfd/mc13783-private.h>
+#include <linux/mfd/mc13783.h>
 #include <linux/platform_device.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/kernel.h>
@@ -144,6 +144,14 @@ static const struct attribute_group mc13783_group_ts = {
 	.attrs = mc13783_attr_ts,
 };
 
+static int mc13783_adc_use_touchscreen(struct platform_device *pdev)
+{
+	struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+	unsigned flags = mc13783_get_flags(priv->mc13783);
+
+	return flags & MC13783_USE_TOUCHSCREEN;
+}
+
 static int __init mc13783_adc_probe(struct platform_device *pdev)
 {
 	struct mc13783_adc_priv *priv;
@@ -162,10 +170,11 @@ static int __init mc13783_adc_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_err_create1;
 
-	if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+	if (!mc13783_adc_use_touchscreen(pdev)) {
 		ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
 		if (ret)
 			goto out_err_create2;
+	}
 
 	priv->hwmon_dev = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(priv->hwmon_dev)) {
@@ -180,7 +189,7 @@ static int __init mc13783_adc_probe(struct platform_device *pdev)
 
 out_err_register:
 
-	if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+	if (!mc13783_adc_use_touchscreen(pdev))
 		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
 out_err_create2:
 
@@ -199,7 +208,7 @@ static int __devexit mc13783_adc_remove(struct platform_device *pdev)
 
 	hwmon_device_unregister(priv->hwmon_dev);
 
-	if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+	if (!mc13783_adc_use_touchscreen(pdev))
 		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
 
 	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);

drivers/input/keyboard/Kconfig

@@ -395,6 +395,16 @@ config KEYBOARD_SH_KEYSC
 	  To compile this driver as a module, choose M here: the
 	  module will be called sh_keysc.
 
+config KEYBOARD_STMPE
+	tristate "STMPE keypad support"
+	depends on MFD_STMPE
+	help
+	  Say Y here if you want to use the keypad controller on STMPE I/O
+	  expanders.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called stmpe-keypad.
+
 config KEYBOARD_DAVINCI
 	tristate "TI DaVinci Key Scan"
 	depends on ARCH_DAVINCI_DM365

drivers/input/keyboard/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o

drivers/input/keyboard/stmpe-keypad.c

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL			0x60
+#define STMPE_KPC_ROW_MSB		0x61
+#define STMPE_KPC_ROW_LSB		0x62
+#define STMPE_KPC_CTRL_MSB		0x63
+#define STMPE_KPC_CTRL_LSB		0x64
+#define STMPE_KPC_COMBI_KEY_0		0x65
+#define STMPE_KPC_COMBI_KEY_1		0x66
+#define STMPE_KPC_COMBI_KEY_2		0x67
+#define STMPE_KPC_DATA_BYTE0		0x68
+#define STMPE_KPC_DATA_BYTE1		0x69
+#define STMPE_KPC_DATA_BYTE2		0x6a
+#define STMPE_KPC_DATA_BYTE3		0x6b
+#define STMPE_KPC_DATA_BYTE4		0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN		(0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE	(0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT	(0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS		0xff
+
+#define STMPE_KPC_DATA_UP		(0x1 << 7)
+#define STMPE_KPC_DATA_ROW		(0xf << 3)
+#define STMPE_KPC_DATA_COL		(0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK	0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE	127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT	15
+
+#define STMPE_KEYPAD_MAX_ROWS		8
+#define STMPE_KEYPAD_MAX_COLS		8
+#define STMPE_KEYPAD_ROW_SHIFT		3
+#define STMPE_KEYPAD_KEYMAP_SIZE	\
+	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ *		    auto-increments on multiple read
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+	bool		auto_increment;
+	int		num_data;
+	int		num_normal_data;
+	int		max_cols;
+	int		max_rows;
+	unsigned int	col_gpios;
+	unsigned int	row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+	[STMPE1601] = {
+		.auto_increment		= true,
+		.num_data		= 5,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 8,
+		.col_gpios		= 0x000ff,	/* GPIO 0 - 7 */
+		.row_gpios		= 0x0ff00,	/* GPIO 8 - 15 */
+	},
+	[STMPE2401] = {
+		.auto_increment		= false,
+		.num_data		= 3,
+		.num_normal_data	= 2,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1fef00,	/* GPIO 8-14, 16-20 */
+	},
+	[STMPE2403] = {
+		.auto_increment		= true,
+		.num_data		= 5,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1fef00,	/* GPIO 8-14, 16-20 */
+	},
+};
+
+struct stmpe_keypad {
+	struct stmpe *stmpe;
+	struct input_dev *input;
+	const struct stmpe_keypad_variant *variant;
+	const struct stmpe_keypad_platform_data *plat;
+
+	unsigned int rows;
+	unsigned int cols;
+
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+	int i;
+
+	if (variant->auto_increment)
+		return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+					variant->num_data, data);
+
+	for (i = 0; i < variant->num_data; i++) {
+		ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+		if (ret < 0)
+			return ret;
+
+		data[i] = ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+	struct stmpe_keypad *keypad = dev;
+	struct input_dev *input = keypad->input;
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	u8 fifo[variant->num_data];
+	int ret;
+	int i;
+
+	ret = stmpe_keypad_read_data(keypad, fifo);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < variant->num_normal_data; i++) {
+		u8 data = fifo[i];
+		int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+		int col = data & STMPE_KPC_DATA_COL;
+		int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+		bool up = data & STMPE_KPC_DATA_UP;
+
+		if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+			== STMPE_KPC_DATA_NOKEY_MASK)
+			continue;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], !up);
+		input_sync(input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	unsigned int col_gpios = variant->col_gpios;
+	unsigned int row_gpios = variant->row_gpios;
+	struct stmpe *stmpe = keypad->stmpe;
+	unsigned int pins = 0;
+	int i;
+
+	/*
+	 * Figure out which pins need to be set to the keypad alternate
+	 * function.
+	 *
+	 * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+	 * for the keypad.
+	 *
+	 * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+	 * for the keypad) are used on the board.
+	 */
+
+	for (i = 0; i < variant->max_cols; i++) {
+		int num = __ffs(col_gpios);
+
+		if (keypad->cols & (1 << i))
+			pins |= 1 << num;
+
+		col_gpios &= ~(1 << num);
+	}
+
+	for (i = 0; i < variant->max_rows; i++) {
+		int num = __ffs(row_gpios);
+
+		if (keypad->rows & (1 << i))
+			pins |= 1 << num;
+
+		row_gpios &= ~(1 << num);
+	}
+
+	return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+}
+
+static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_platform_data *plat = keypad->plat;
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+
+	if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+		return -EINVAL;
+
+	if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+		return -EINVAL;
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_keypad_altfunc_init(keypad);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+	if (ret < 0)
+		return ret;
+
+	if (variant->max_rows > 8) {
+		ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+				     STMPE_KPC_ROW_MSB_ROWS,
+				     keypad->rows >> 8);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+			     plat->scan_count << 4);
+	if (ret < 0)
+		return ret;
+
+	return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      (plat->debounce_ms << 1));
+}
+
+static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct stmpe_keypad_platform_data *plat;
+	struct stmpe_keypad *keypad;
+	struct input_dev *input;
+	int ret;
+	int irq;
+	int i;
+
+	plat = stmpe->pdata->keypad;
+	if (!plat)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input = input_allocate_device();
+	if (!input) {
+		ret = -ENOMEM;
+		goto out_freekeypad;
+	}
+
+	input->name = "STMPE keypad";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &pdev->dev;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
+				   input->keycode, input->keybit);
+
+	for (i = 0; i < plat->keymap_data->keymap_size; i++) {
+		unsigned int key = plat->keymap_data->keymap[i];
+
+		keypad->cols |= 1 << KEY_COL(key);
+		keypad->rows |= 1 << KEY_ROW(key);
+	}
+
+	keypad->stmpe = stmpe;
+	keypad->plat = plat;
+	keypad->input = input;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	ret = stmpe_keypad_chip_init(keypad);
+	if (ret < 0)
+		goto out_freeinput;
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", ret);
+		goto out_freeinput;
+	}
+
+	ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT,
+				   "stmpe-keypad", keypad);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+		goto out_unregisterinput;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+out_unregisterinput:
+	input_unregister_device(input);
+	input = NULL;
+out_freeinput:
+	input_free_device(input);
+out_freekeypad:
+	kfree(keypad);
+	return ret;
+}
+
+static int __devexit stmpe_keypad_remove(struct platform_device *pdev)
+{
+	struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+	struct stmpe *stmpe = keypad->stmpe;
+	int irq = platform_get_irq(pdev, 0);
+
+	stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD);
+
+	free_irq(irq, keypad);
+	input_unregister_device(keypad->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+	.driver.name	= "stmpe-keypad",
+	.driver.owner	= THIS_MODULE,
+	.probe		= stmpe_keypad_probe,
+	.remove		= __devexit_p(stmpe_keypad_remove),
+};
+
+static int __init stmpe_keypad_init(void)
+{
+	return platform_driver_register(&stmpe_keypad_driver);
+}
+module_init(stmpe_keypad_init);
+
+static void __exit stmpe_keypad_exit(void)
+{
+	platform_driver_unregister(&stmpe_keypad_driver);
+}
+module_exit(stmpe_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");

drivers/input/touchscreen/Kconfig

@@ -628,4 +628,14 @@ config TOUCHSCREEN_TPS6507X
 	  To compile this driver as a module, choose M here: the
 	  module will be called tps6507x_ts.
 
+config TOUCHSCREEN_STMPE
+	tristate "STMicroelectronics STMPE touchscreens"
+	depends on MFD_STMPE
+	help
+	  Say Y here if you want support for STMicroelectronics
+	  STMPE touchscreen controllers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmpe-ts.
+
 endif

drivers/input/touchscreen/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
+obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o

drivers/mfd/88pm860x-core.c

@@ -74,12 +74,12 @@ static struct mfd_cell backlight_devs[] = {
 }
 
 static struct resource led_resources[] = {
-	PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB2B),
-	PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB2C),
-	PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB2D),
-	PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB1B),
-	PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB1C),
-	PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB1D),
+	PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB1B),
+	PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB1C),
+	PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB1D),
+	PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB2B),
+	PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB2C),
+	PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB2D),
 };
 
 #define PM8606_LED_DEVS(_i)				\
@@ -428,52 +428,44 @@ static int __devinit device_gpadc_init(struct pm860x_chip *chip,
 {
 	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
 				: chip->companion;
-	int use_gpadc = 0, data, ret;
+	int data;
+	int ret;
 
 	/* initialize GPADC without activating it */
 
-	if (pdata && pdata->touch) {
-		/* set GPADC MISC1 register */
-		data = 0;
-		data |= (pdata->touch->gpadc_prebias << 1)
-			& PM8607_GPADC_PREBIAS_MASK;
-		data |= (pdata->touch->slot_cycle << 3)
-			& PM8607_GPADC_SLOT_CYCLE_MASK;
-		data |= (pdata->touch->off_scale << 5)
-			& PM8607_GPADC_OFF_SCALE_MASK;
-		data |= (pdata->touch->sw_cal << 7)
-			& PM8607_GPADC_SW_CAL_MASK;
-		if (data) {
-			ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
-			if (ret < 0)
-				goto out;
-		}
-		/* set tsi prebias time */
-		if (pdata->touch->tsi_prebias) {
-			data = pdata->touch->tsi_prebias;
-			ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
-			if (ret < 0)
-				goto out;
-		}
-		/* set prebias & prechg time of pen detect */
-		data = 0;
-		data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK;
-		data |= (pdata->touch->pen_prechg << 5)
-			& PM8607_PD_PRECHG_MASK;
-		if (data) {
-			ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
-			if (ret < 0)
-				goto out;
-		}
+	if (!pdata || !pdata->touch)
+		return -EINVAL;
 
-		use_gpadc = 1;
+	/* set GPADC MISC1 register */
+	data = 0;
+	data |= (pdata->touch->gpadc_prebias << 1) & PM8607_GPADC_PREBIAS_MASK;
+	data |= (pdata->touch->slot_cycle << 3) & PM8607_GPADC_SLOT_CYCLE_MASK;
+	data |= (pdata->touch->off_scale << 5) & PM8607_GPADC_OFF_SCALE_MASK;
+	data |= (pdata->touch->sw_cal << 7) & PM8607_GPADC_SW_CAL_MASK;
+	if (data) {
+		ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
+		if (ret < 0)
+			goto out;
 	}
-
-	/* turn on GPADC */
-	if (use_gpadc) {
-		ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1,
-				      PM8607_GPADC_EN, PM8607_GPADC_EN);
+	/* set tsi prebias time */
+	if (pdata->touch->tsi_prebias) {
+		data = pdata->touch->tsi_prebias;
+		ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
+		if (ret < 0)
+			goto out;
 	}
+	/* set prebias & prechg time of pen detect */
+	data = 0;
+	data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK;
+	data |= (pdata->touch->pen_prechg << 5) & PM8607_PD_PRECHG_MASK;
+	if (data) {
+		ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1,
+			      PM8607_GPADC_EN, PM8607_GPADC_EN);
 out:
 	return ret;
 }

drivers/mfd/Kconfig

@@ -7,7 +7,16 @@ menuconfig MFD_SUPPORT
 	depends on HAS_IOMEM
 	default y
 	help
-	  Configure MFD device drivers.
+	  Multifunction devices embed several functions (e.g. GPIOs,
+	  touchscreens, keyboards, current regulators, power management chips,
+	  etc...) in one single integrated circuit. They usually talk to the
+	  main CPU through one or more IRQ lines and low speed data busses (SPI,
+	  I2C, etc..). They appear as one single device to the main system
+	  through the data bus and the MFD framework allows for sub devices
+	  (a.k.a. functions) to appear as discrete platform devices.
+	  MFDs are typically found on embedded platforms.
+
+	  This option alone does not add any kernel code.
 
 if MFD_SUPPORT
 
@@ -177,6 +186,38 @@ config TWL4030_CODEC
 	select MFD_CORE
 	default n
 
+config TWL6030_PWM
+	tristate "TWL6030 PWM (Pulse Width Modulator) Support"
+	depends on TWL4030_CORE
+	select HAVE_PWM
+	default n
+	help
+	  Say yes here if you want support for TWL6030 PWM.
+	  This is used to control charging LED brightness.
+
+config MFD_STMPE
+	bool "Support STMicroelectronics STMPE"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  Support for the STMPE family of I/O Expanders from
+	  STMicroelectronics.
+
+	  Currently supported devices are:
+
+		STMPE811: GPIO, Touchscreen
+		STMPE1601: GPIO, Keypad
+		STMPE2401: GPIO, Keypad
+		STMPE2403: GPIO, Keypad
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.  Currently available sub drivers are:
+
+		GPIO: stmpe-gpio
+		Keypad: stmpe-keypad
+		Touchscreen: stmpe-ts
+
 config MFD_TC35892
 	bool "Support Toshiba TC35892"
 	depends on I2C=y && GENERIC_HARDIRQS
@@ -482,6 +523,28 @@ config MFD_JANZ_CMODIO
 	  host many different types of MODULbus daughterboards, including
 	  CAN and GPIO controllers.
 
+config MFD_JZ4740_ADC
+	tristate "Support for the JZ4740 SoC ADC core"
+	select MFD_CORE
+	depends on MACH_JZ4740
+	help
+	  Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+	  This driver is necessary for jz4740-battery and jz4740-hwmon driver.
+
+config MFD_TPS6586X
+	tristate "TPS6586x Power Management chips"
+	depends on I2C && GPIOLIB
+	select MFD_CORE
+	help
+	  If you say yes here you get support for the TPS6586X series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps6586x.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"

drivers/mfd/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
 obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 
+obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
 obj-$(CONFIG_MFD_TC35892)	+= tc35892.o
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
@@ -36,6 +37,7 @@ obj-$(CONFIG_MENELAUS)		+= menelaus.o
 obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
 obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
+obj-$(CONFIG_TWL6030_PWM)	+= twl6030-pwm.o
 
 obj-$(CONFIG_MFD_MC13783)	+= mc13783-core.o
 
@@ -71,3 +73,5 @@ obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
 obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o
 obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
+obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
+obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o

drivers/mfd/ab3100-otp.c

@@ -199,7 +199,7 @@ static int __init ab3100_otp_probe(struct platform_device *pdev)
 
 	err = ab3100_otp_read(otp);
 	if (err)
-		return err;
+		goto err_otp_read;
 
 	dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
 
@@ -208,21 +208,21 @@ static int __init ab3100_otp_probe(struct platform_device *pdev)
 		err = device_create_file(&pdev->dev,
 					 &ab3100_otp_attrs[i]);
 		if (err)
-			goto out_no_sysfs;
+			goto err_create_file;
 	}
 
 	/* debugfs entries */
 	err = ab3100_otp_init_debugfs(&pdev->dev, otp);
 	if (err)
-		goto out_no_debugfs;
+		goto err_init_debugfs;
 
 	return 0;
 
-out_no_sysfs:
-	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
-		device_remove_file(&pdev->dev,
-				   &ab3100_otp_attrs[i]);
-out_no_debugfs:
+err_init_debugfs:
+err_create_file:
+	while (--i >= 0)
+		device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]);
+err_otp_read:
 	kfree(otp);
 	return err;
 }

drivers/mfd/ab3550-core.c

@@ -589,16 +589,16 @@ static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
 }
 
 /*
- * The exported register access functionality.
+ * The register access functionality.
  */
-int ab3550_get_chip_id(struct device *dev)
+static int ab3550_get_chip_id(struct device *dev)
 {
 	struct ab3550 *ab = dev_get_drvdata(dev->parent);
 	return (int)ab->chip_id;
 }
 
-int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 bitmask, u8 bitvalues)
+static int ab3550_mask_and_set_register_interruptible(struct device *dev,
+	u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
 {
 	struct ab3550 *ab;
 	struct platform_device *pdev = to_platform_device(dev);
@@ -612,15 +612,15 @@ int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
 		bitmask, bitvalues);
 }
 
-int ab3550_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
-	u8 value)
+static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 value)
 {
 	return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
 		value);
 }
 
-int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
-	u8 *value)
+static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 *value)
 {
 	struct ab3550 *ab;
 	struct platform_device *pdev = to_platform_device(dev);
@@ -633,7 +633,7 @@ int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	return get_register_interruptible(ab, bank, reg, value);
 }
 
-int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
+static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
 	u8 first_reg, u8 *regvals, u8 numregs)
 {
 	struct ab3550 *ab;
@@ -649,7 +649,8 @@ int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
 		numregs);
 }
 
-int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
+static int ab3550_event_registers_startup_state_get(struct device *dev,
+	u8 *event)
 {
 	struct ab3550 *ab;
 
@@ -661,7 +662,7 @@ int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
 	return 0;
 }
 
-int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
+static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
 {
 	struct ab3550 *ab;
 	struct ab3550_platform_data *plf_data;

drivers/mfd/ab8500-spi.c

@@ -68,7 +68,12 @@ static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr)
 
 	ret = spi_sync(spi, &msg);
 	if (!ret)
-		ret = ab8500->rx_buf[0];
+		/*
+		 * Only the 8 lowermost bytes are
+		 * defined with value, the rest may
+		 * vary depending on chip/board noise.
+		 */
+		ret = ab8500->rx_buf[0] & 0xFFU;
 
 	return ret;
 }

drivers/mfd/abx500-core.c

@@ -36,7 +36,7 @@ int abx500_register_ops(struct device *dev, struct abx500_ops *ops)
 	struct abx500_device_entry *dev_entry;
 
 	dev_entry = kzalloc(sizeof(struct abx500_device_entry), GFP_KERNEL);
-	if (IS_ERR(dev_entry)) {
+	if (!dev_entry) {
 		dev_err(dev, "register_ops kzalloc failed");
 		return -ENOMEM;
 	}

drivers/mfd/davinci_voicecodec.c

@@ -94,7 +94,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "no DMA resource\n");
-		return -ENXIO;
+		ret = -ENXIO;
+		goto fail4;
 	}
 
 	davinci_vc->davinci_vcif.dma_tx_channel = res->start;
@@ -104,7 +105,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (!res) {
 		dev_err(&pdev->dev, "no DMA resource\n");
-		return -ENXIO;
+		ret = -ENXIO;
+		goto fail4;
 	}
 
 	davinci_vc->davinci_vcif.dma_rx_channel = res->start;

drivers/mfd/janz-cmodio.c

@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/mfd/core.h>
 
 #include <linux/mfd/janz.h>

drivers/mfd/jz4740-adc.c

+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 SoC ADC driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This driver synchronizes access to the JZ4740 ADC core between the
+ * JZ4740 battery and hwmon drivers.
+ */
+
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/clk.h>
+#include <linux/mfd/core.h>
+
+#include <linux/jz4740-adc.h>
+
+
+#define JZ_REG_ADC_ENABLE	0x00
+#define JZ_REG_ADC_CFG		0x04
+#define JZ_REG_ADC_CTRL		0x08
+#define JZ_REG_ADC_STATUS	0x0c
+
+#define JZ_REG_ADC_TOUCHSCREEN_BASE	0x10
+#define JZ_REG_ADC_BATTERY_BASE	0x1c
+#define JZ_REG_ADC_HWMON_BASE	0x20
+
+#define JZ_ADC_ENABLE_TOUCH	BIT(2)
+#define JZ_ADC_ENABLE_BATTERY	BIT(1)
+#define JZ_ADC_ENABLE_ADCIN	BIT(0)
+
+enum {
+	JZ_ADC_IRQ_ADCIN = 0,
+	JZ_ADC_IRQ_BATTERY,
+	JZ_ADC_IRQ_TOUCH,
+	JZ_ADC_IRQ_PENUP,
+	JZ_ADC_IRQ_PENDOWN,
+};
+
+struct jz4740_adc {
+	struct resource *mem;
+	void __iomem *base;
+
+	int irq;
+	int irq_base;
+
+	struct clk *clk;
+	atomic_t clk_ref;
+
+	spinlock_t lock;
+};
+
+static inline void jz4740_adc_irq_set_masked(struct jz4740_adc *adc, int irq,
+	bool masked)
+{
+	unsigned long flags;
+	uint8_t val;
+
+	irq -= adc->irq_base;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	val = readb(adc->base + JZ_REG_ADC_CTRL);
+	if (masked)
+		val |= BIT(irq);
+	else
+		val &= ~BIT(irq);
+	writeb(val, adc->base + JZ_REG_ADC_CTRL);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
+}
+
+static void jz4740_adc_irq_mask(unsigned int irq)
+{
+	struct jz4740_adc *adc = get_irq_chip_data(irq);
+	jz4740_adc_irq_set_masked(adc, irq, true);
+}
+
+static void jz4740_adc_irq_unmask(unsigned int irq)
+{
+	struct jz4740_adc *adc = get_irq_chip_data(irq);
+	jz4740_adc_irq_set_masked(adc, irq, false);
+}
+
+static void jz4740_adc_irq_ack(unsigned int irq)
+{
+	struct jz4740_adc *adc = get_irq_chip_data(irq);
+
+	irq -= adc->irq_base;
+	writeb(BIT(irq), adc->base + JZ_REG_ADC_STATUS);
+}
+
+static struct irq_chip jz4740_adc_irq_chip = {
+	.name = "jz4740-adc",
+	.mask = jz4740_adc_irq_mask,
+	.unmask = jz4740_adc_irq_unmask,
+	.ack = jz4740_adc_irq_ack,
+};
+
+static void jz4740_adc_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct jz4740_adc *adc = get_irq_desc_data(desc);
+	uint8_t status;
+	unsigned int i;
+
+	status = readb(adc->base + JZ_REG_ADC_STATUS);
+
+	for (i = 0; i < 5; ++i) {
+		if (status & BIT(i))
+			generic_handle_irq(adc->irq_base + i);
+	}
+}
+
+
+/* Refcounting for the ADC clock is done in here instead of in the clock
+ * framework, because it is the only clock which is shared between multiple
+ * devices and thus is the only clock which needs refcounting */
+static inline void jz4740_adc_clk_enable(struct jz4740_adc *adc)
+{
+	if (atomic_inc_return(&adc->clk_ref) == 1)
+		clk_enable(adc->clk);
+}
+
+static inline void jz4740_adc_clk_disable(struct jz4740_adc *adc)
+{
+	if (atomic_dec_return(&adc->clk_ref) == 0)
+		clk_disable(adc->clk);
+}
+
+static inline void jz4740_adc_set_enabled(struct jz4740_adc *adc, int engine,
+	bool enabled)
+{
+	unsigned long flags;
+	uint8_t val;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	val = readb(adc->base + JZ_REG_ADC_ENABLE);
+	if (enabled)
+		val |= BIT(engine);
+	else
+		val &= BIT(engine);
+	writeb(val, adc->base + JZ_REG_ADC_ENABLE);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
+}
+
+static int jz4740_adc_cell_enable(struct platform_device *pdev)
+{
+	struct jz4740_adc *adc = dev_get_drvdata(pdev->dev.parent);
+
+	jz4740_adc_clk_enable(adc);
+	jz4740_adc_set_enabled(adc, pdev->id, true);
+
+	return 0;
+}
+
+static int jz4740_adc_cell_disable(struct platform_device *pdev)
+{
+	struct jz4740_adc *adc = dev_get_drvdata(pdev->dev.parent);
+
+	jz4740_adc_set_enabled(adc, pdev->id, false);
+	jz4740_adc_clk_disable(adc);
+
+	return 0;
+}
+
+int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val)
+{
+	struct jz4740_adc *adc = dev_get_drvdata(dev);
+	unsigned long flags;
+	uint32_t cfg;
+
+	if (!adc)
+		return -ENODEV;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	cfg = readl(adc->base + JZ_REG_ADC_CFG);
+
+	cfg &= ~mask;
+	cfg |= val;
+
+	writel(cfg, adc->base + JZ_REG_ADC_CFG);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(jz4740_adc_set_config);
+
+static struct resource jz4740_hwmon_resources[] = {
+	{
+		.start = JZ_ADC_IRQ_ADCIN,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start	= JZ_REG_ADC_HWMON_BASE,
+		.end	= JZ_REG_ADC_HWMON_BASE + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource jz4740_battery_resources[] = {
+	{
+		.start = JZ_ADC_IRQ_BATTERY,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start	= JZ_REG_ADC_BATTERY_BASE,
+		.end	= JZ_REG_ADC_BATTERY_BASE + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+const struct mfd_cell jz4740_adc_cells[] = {
+	{
+		.id = 0,
+		.name = "jz4740-hwmon",
+		.num_resources = ARRAY_SIZE(jz4740_hwmon_resources),
+		.resources = jz4740_hwmon_resources,
+		.platform_data = (void *)&jz4740_adc_cells[0],
+		.data_size = sizeof(struct mfd_cell),
+
+		.enable = jz4740_adc_cell_enable,
+		.disable = jz4740_adc_cell_disable,
+	},
+	{
+		.id = 1,
+		.name = "jz4740-battery",
+		.num_resources = ARRAY_SIZE(jz4740_battery_resources),
+		.resources = jz4740_battery_resources,
+		.platform_data = (void *)&jz4740_adc_cells[1],
+		.data_size = sizeof(struct mfd_cell),
+
+		.enable = jz4740_adc_cell_enable,
+		.disable = jz4740_adc_cell_disable,
+	},
+};
+
+static int __devinit jz4740_adc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz4740_adc *adc;
+	struct resource *mem_base;
+	int irq;
+
+	adc = kmalloc(sizeof(*adc), GFP_KERNEL);
+	if (!adc) {
+		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+		return -ENOMEM;
+	}
+
+	adc->irq = platform_get_irq(pdev, 0);
+	if (adc->irq < 0) {
+		ret = adc->irq;
+		dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+		goto err_free;
+	}
+
+	adc->irq_base = platform_get_irq(pdev, 1);
+	if (adc->irq_base < 0) {
+		ret = adc->irq_base;
+		dev_err(&pdev->dev, "Failed to get irq base: %d\n", ret);
+		goto err_free;
+	}
+
+	mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_base) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get platform mmio resource\n");
+		goto err_free;
+	}
+
+	/* Only request the shared registers for the MFD driver */
+	adc->mem = request_mem_region(mem_base->start, JZ_REG_ADC_STATUS,
+					pdev->name);
+	if (!adc->mem) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
+		goto err_free;
+	}
+
+	adc->base = ioremap_nocache(adc->mem->start, resource_size(adc->mem));
+	if (!adc->base) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
+		goto err_release_mem_region;
+	}
+
+	adc->clk = clk_get(&pdev->dev, "adc");
+	if (IS_ERR(adc->clk)) {
+		ret = PTR_ERR(adc->clk);
+		dev_err(&pdev->dev, "Failed to get clock: %d\n", ret);
+		goto err_iounmap;
+	}
+
+	spin_lock_init(&adc->lock);
+	atomic_set(&adc->clk_ref, 0);
+
+	platform_set_drvdata(pdev, adc);
+
+	for (irq = adc->irq_base; irq < adc->irq_base + 5; ++irq) {
+		set_irq_chip_data(irq, adc);
+		set_irq_chip_and_handler(irq, &jz4740_adc_irq_chip,
+		    handle_level_irq);
+	}
+
+	set_irq_data(adc->irq, adc);
+	set_irq_chained_handler(adc->irq, jz4740_adc_irq_demux);
+
+	writeb(0x00, adc->base + JZ_REG_ADC_ENABLE);
+	writeb(0xff, adc->base + JZ_REG_ADC_CTRL);
+
+	ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells,
+		ARRAY_SIZE(jz4740_adc_cells), mem_base, adc->irq_base);
+	if (ret < 0)
+		goto err_clk_put;
+
+	return 0;
+
+err_clk_put:
+	clk_put(adc->clk);
+err_iounmap:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(adc->base);
+err_release_mem_region:
+	release_mem_region(adc->mem->start, resource_size(adc->mem));
+err_free:
+	kfree(adc);
+
+	return ret;
+}
+
+static int __devexit jz4740_adc_remove(struct platform_device *pdev)
+{
+	struct jz4740_adc *adc = platform_get_drvdata(pdev);
+
+	mfd_remove_devices(&pdev->dev);
+
+	set_irq_data(adc->irq, NULL);
+	set_irq_chained_handler(adc->irq, NULL);
+
+	iounmap(adc->base);
+	release_mem_region(adc->mem->start, resource_size(adc->mem));
+
+	clk_put(adc->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(adc);
+
+	return 0;
+}
+
+struct platform_driver jz4740_adc_driver = {
+	.probe	= jz4740_adc_probe,
+	.remove = __devexit_p(jz4740_adc_remove),
+	.driver = {
+		.name = "jz4740-adc",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz4740_adc_init(void)
+{
+	return platform_driver_register(&jz4740_adc_driver);
+}
+module_init(jz4740_adc_init);
+
+static void __exit jz4740_adc_exit(void)
+{
+	platform_driver_unregister(&jz4740_adc_driver);
+}
+module_exit(jz4740_adc_exit);
+
+MODULE_DESCRIPTION("JZ4740 SoC ADC driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:jz4740-adc");

drivers/mfd/max8925-core.c

@@ -90,6 +90,24 @@ static struct mfd_cell rtc_devs[] = {
 	},
 };
 
+static struct resource onkey_resources[] = {
+	{
+		.name	= "max8925-onkey",
+		.start	= MAX8925_IRQ_GPM_SW_3SEC,
+		.end	= MAX8925_IRQ_GPM_SW_3SEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell onkey_devs[] = {
+	{
+		.name		= "max8925-onkey",
+		.num_resources	= 1,
+		.resources	= &onkey_resources[0],
+		.id		= -1,
+	},
+};
+
 #define MAX8925_REG_RESOURCE(_start, _end)	\
 {						\
 	.start	= MAX8925_##_start,		\
@@ -596,6 +614,15 @@ int __devinit max8925_device_init(struct max8925_chip *chip,
 		dev_err(chip->dev, "Failed to add rtc subdev\n");
 		goto out;
 	}
+
+	ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
+			      ARRAY_SIZE(onkey_devs),
+			      &onkey_resources[0], 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to add onkey subdev\n");
+		goto out_dev;
+	}
+
 	if (pdata && pdata->regulator[0]) {
 		ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
 				      ARRAY_SIZE(regulator_devs),

drivers/mfd/mc13783-core.c

@@ -11,9 +11,31 @@
  */
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/mc13783-private.h>
+#include <linux/mfd/mc13783.h>
+
+struct mc13783 {
+	struct spi_device *spidev;
+	struct mutex lock;
+	int irq;
+	int flags;
+
+	irq_handler_t irqhandler[MC13783_NUM_IRQ];
+	void *irqdata[MC13783_NUM_IRQ];
+
+	/* XXX these should go as platformdata to the regulator subdevice */
+	struct mc13783_regulator_init_data *regulators;
+	int num_regulators;
+};
+
+#define MC13783_REG_REVISION			 7
+#define MC13783_REG_ADC_0			43
+#define MC13783_REG_ADC_1			44
+#define MC13783_REG_ADC_2			45
 
 #define MC13783_IRQSTAT0	0
 #define MC13783_IRQSTAT0_ADCDONEI	(1 << 0)
@@ -226,6 +248,12 @@ int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset,
 }
 EXPORT_SYMBOL(mc13783_reg_rmw);
 
+int mc13783_get_flags(struct mc13783 *mc13783)
+{
+	return mc13783->flags;
+}
+EXPORT_SYMBOL(mc13783_get_flags);
+
 int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
 {
 	int ret;

drivers/mfd/menelaus.c

@@ -128,6 +128,39 @@
 #define MENELAUS_RESERVED14_IRQ		14	/* Reserved */
 #define MENELAUS_RESERVED15_IRQ		15	/* Reserved */
 
+/* VCORE_CTRL1 register */
+#define VCORE_CTRL1_BYP_COMP		(1 << 5)
+#define VCORE_CTRL1_HW_NSW		(1 << 7)
+
+/* GPIO_CTRL register */
+#define GPIO_CTRL_SLOTSELEN		(1 << 5)
+#define GPIO_CTRL_SLPCTLEN		(1 << 6)
+#define GPIO1_DIR_INPUT			(1 << 0)
+#define GPIO2_DIR_INPUT			(1 << 1)
+#define GPIO3_DIR_INPUT			(1 << 2)
+
+/* MCT_CTRL1 register */
+#define MCT_CTRL1_S1_CMD_OD		(1 << 2)
+#define MCT_CTRL1_S2_CMD_OD		(1 << 3)
+
+/* MCT_CTRL2 register */
+#define MCT_CTRL2_VS2_SEL_D0		(1 << 0)
+#define MCT_CTRL2_VS2_SEL_D1		(1 << 1)
+#define MCT_CTRL2_S1CD_BUFEN		(1 << 4)
+#define MCT_CTRL2_S2CD_BUFEN		(1 << 5)
+#define MCT_CTRL2_S1CD_DBEN		(1 << 6)
+#define MCT_CTRL2_S2CD_BEN		(1 << 7)
+
+/* MCT_CTRL3 register */
+#define MCT_CTRL3_SLOT1_EN		(1 << 0)
+#define MCT_CTRL3_SLOT2_EN		(1 << 1)
+#define MCT_CTRL3_S1_AUTO_EN		(1 << 2)
+#define MCT_CTRL3_S2_AUTO_EN		(1 << 3)
+
+/* MCT_PIN_ST register */
+#define MCT_PIN_ST_S1_CD_ST		(1 << 0)
+#define MCT_PIN_ST_S2_CD_ST		(1 << 1)
+
 static void menelaus_work(struct work_struct *_menelaus);
 
 struct menelaus_chip {
@@ -249,10 +282,10 @@ static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
 		return;
 
 	if (!(reg & 0x1))
-		card_mask |= (1 << 0);
+		card_mask |= MCT_PIN_ST_S1_CD_ST;
 
 	if (!(reg & 0x2))
-		card_mask |= (1 << 1);
+		card_mask |= MCT_PIN_ST_S2_CD_ST;
 
 	if (menelaus_hw->mmc_callback)
 		menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
@@ -277,14 +310,14 @@ int menelaus_set_mmc_opendrain(int slot, int enable)
 	val = ret;
 	if (slot == 1) {
 		if (enable)
-			val |= 1 << 2;
+			val |= MCT_CTRL1_S1_CMD_OD;
 		else
-			val &= ~(1 << 2);
+			val &= ~MCT_CTRL1_S1_CMD_OD;
 	} else {
 		if (enable)
-			val |= 1 << 3;
+			val |= MCT_CTRL1_S2_CMD_OD;
 		else
-			val &= ~(1 << 3);
+			val &= ~MCT_CTRL1_S2_CMD_OD;
 	}
 	ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
 	mutex_unlock(&the_menelaus->lock);
@@ -301,11 +334,11 @@ int menelaus_set_slot_sel(int enable)
 	ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
 	if (ret < 0)
 		goto out;
-	ret |= 0x02;
+	ret |= GPIO2_DIR_INPUT;
 	if (enable)
-		ret |= 1 << 5;
+		ret |= GPIO_CTRL_SLOTSELEN;
 	else
-		ret &= ~(1 << 5);
+		ret &= ~GPIO_CTRL_SLOTSELEN;
 	ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
 out:
 	mutex_unlock(&the_menelaus->lock);
@@ -330,14 +363,14 @@ int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
 	val = ret;
 	if (slot == 1) {
 		if (cd_en)
-			val |= (1 << 4) | (1 << 6);
+			val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN;
 		else
-			val &= ~((1 << 4) | (1 << 6));
+			val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN);
 	} else {
 		if (cd_en)
-			val |= (1 << 5) | (1 << 7);
+			val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN;
 		else
-			val &= ~((1 << 5) | (1 << 7));
+			val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN);
 	}
 	ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
 	if (ret < 0)
@@ -349,25 +382,25 @@ int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
 	val = ret;
 	if (slot == 1) {
 		if (enable)
-			val |= 1 << 0;
+			val |= MCT_CTRL3_SLOT1_EN;
 		else
-			val &= ~(1 << 0);
+			val &= ~MCT_CTRL3_SLOT1_EN;
 	} else {
 		int b;
 
 		if (enable)
-			ret |= 1 << 1;
+			val |= MCT_CTRL3_SLOT2_EN;
 		else
-			ret &= ~(1 << 1);
+			val &= ~MCT_CTRL3_SLOT2_EN;
 		b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
-		b &= ~0x03;
+		b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1);
 		b |= power;
 		ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
 		if (ret < 0)
 			goto out;
 	}
 	/* Disable autonomous shutdown */
-	val &= ~(0x03 << 2);
+	val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN);
 	ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
 out:
 	mutex_unlock(&the_menelaus->lock);
@@ -552,7 +585,7 @@ int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
 	if (!the_menelaus->vcore_hw_mode) {
 		val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
 		/* HW mode, turn OFF byte comparator */
-		val |= ((1 << 7) | (1 << 5));
+		val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP);
 		ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
 		the_menelaus->vcore_hw_mode = 1;
 	}
@@ -749,7 +782,7 @@ int menelaus_set_regulator_sleep(int enable, u32 val)
 	ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
 	if (ret < 0)
 		goto out;
-	t = ((1 << 6) | 0x04);
+	t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT);
 	if (enable)
 		ret |= t;
 	else

drivers/mfd/mfd-core.c

@@ -70,7 +70,9 @@ static int mfd_add_device(struct device *parent, int id,
 			goto fail_res;
 	}
 
-	platform_device_add_resources(pdev, res, cell->num_resources);
+	ret = platform_device_add_resources(pdev, res, cell->num_resources);
+	if (ret)
+		goto fail_res;
 
 	ret = platform_device_add(pdev);
 	if (ret)

drivers/mfd/stmpe.h

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __STMPE_H
+#define __STMPE_H
+
+#ifdef STMPE_DUMP_BYTES
+static inline void stmpe_dump_bytes(const char *str, const void *buf,
+				    size_t len)
+{
+	print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
+}
+#else
+static inline void stmpe_dump_bytes(const char *str, const void *buf,
+				    size_t len)
+{
+}
+#endif
+
+/**
+ * struct stmpe_variant_block - information about block
+ * @cell:	base mfd cell
+ * @irq:	interrupt number to be added to each IORESOURCE_IRQ
+ *		in the cell
+ * @block:	block id; used for identification with platform data and for
+ *		enable and altfunc callbacks
+ */
+struct stmpe_variant_block {
+	struct mfd_cell		*cell;
+	int			irq;
+	enum stmpe_block	block;
+};
+
+/**
+ * struct stmpe_variant_info - variant-specific information
+ * @name:	part name
+ * @id_val:	content of CHIPID register
+ * @id_mask:	bits valid in CHIPID register for comparison with id_val
+ * @num_gpios:	number of GPIOS
+ * @af_bits:	number of bits used to specify the alternate function
+ * @blocks:	list of blocks present on this device
+ * @num_blocks:	number of blocks present on this device
+ * @num_irqs:	number of internal IRQs available on this device
+ * @enable:	callback to enable the specified blocks.
+ *		Called with the I/O lock held.
+ * @get_altfunc: callback to get the alternate function number for the
+ *		 specific block
+ * @enable_autosleep: callback to configure autosleep with specified timeout
+ */
+struct stmpe_variant_info {
+	const char *name;
+	u16 id_val;
+	u16 id_mask;
+	int num_gpios;
+	int af_bits;
+	const u8 *regs;
+	struct stmpe_variant_block *blocks;
+	int num_blocks;
+	int num_irqs;
+	int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
+	int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
+	int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
+};
+
+#define STMPE_ICR_LSB_HIGH	(1 << 2)
+#define STMPE_ICR_LSB_EDGE	(1 << 1)
+#define STMPE_ICR_LSB_GIM	(1 << 0)
+
+/*
+ * STMPE811
+ */
+
+#define STMPE811_IRQ_TOUCH_DET		0
+#define STMPE811_IRQ_FIFO_TH		1
+#define STMPE811_IRQ_FIFO_OFLOW		2
+#define STMPE811_IRQ_FIFO_FULL		3
+#define STMPE811_IRQ_FIFO_EMPTY		4
+#define STMPE811_IRQ_TEMP_SENS		5
+#define STMPE811_IRQ_ADC		6
+#define STMPE811_IRQ_GPIOC		7
+#define STMPE811_NR_INTERNAL_IRQS	8
+
+#define STMPE811_REG_CHIP_ID		0x00
+#define STMPE811_REG_SYS_CTRL2		0x04
+#define STMPE811_REG_INT_CTRL		0x09
+#define STMPE811_REG_INT_EN		0x0A
+#define STMPE811_REG_INT_STA		0x0B
+#define STMPE811_REG_GPIO_INT_EN	0x0C
+#define STMPE811_REG_GPIO_INT_STA	0x0D
+#define STMPE811_REG_GPIO_SET_PIN	0x10
+#define STMPE811_REG_GPIO_CLR_PIN	0x11
+#define STMPE811_REG_GPIO_MP_STA	0x12
+#define STMPE811_REG_GPIO_DIR		0x13
+#define STMPE811_REG_GPIO_ED		0x14
+#define STMPE811_REG_GPIO_RE		0x15
+#define STMPE811_REG_GPIO_FE		0x16
+#define STMPE811_REG_GPIO_AF		0x17
+
+#define STMPE811_SYS_CTRL2_ADC_OFF	(1 << 0)
+#define STMPE811_SYS_CTRL2_TSC_OFF	(1 << 1)
+#define STMPE811_SYS_CTRL2_GPIO_OFF	(1 << 2)
+#define STMPE811_SYS_CTRL2_TS_OFF	(1 << 3)
+
+/*
+ * STMPE1601
+ */
+
+#define STMPE1601_IRQ_GPIOC		8
+#define STMPE1601_IRQ_PWM3		7
+#define STMPE1601_IRQ_PWM2		6
+#define STMPE1601_IRQ_PWM1		5
+#define STMPE1601_IRQ_PWM0		4
+#define STMPE1601_IRQ_KEYPAD_OVER	2
+#define STMPE1601_IRQ_KEYPAD		1
+#define STMPE1601_IRQ_WAKEUP		0
+#define STMPE1601_NR_INTERNAL_IRQS	9
+
+#define STMPE1601_REG_SYS_CTRL			0x02
+#define STMPE1601_REG_SYS_CTRL2			0x03
+#define STMPE1601_REG_ICR_LSB			0x11
+#define STMPE1601_REG_IER_LSB			0x13
+#define STMPE1601_REG_ISR_MSB			0x14
+#define STMPE1601_REG_CHIP_ID			0x80
+#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB	0x17
+#define STMPE1601_REG_INT_STA_GPIO_MSB		0x18
+#define STMPE1601_REG_GPIO_MP_LSB		0x87
+#define STMPE1601_REG_GPIO_SET_LSB		0x83
+#define STMPE1601_REG_GPIO_CLR_LSB		0x85
+#define STMPE1601_REG_GPIO_SET_DIR_LSB		0x89
+#define STMPE1601_REG_GPIO_ED_MSB		0x8A
+#define STMPE1601_REG_GPIO_RE_LSB		0x8D
+#define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_AF_U_MSB		0x92
+
+#define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
+#define STMPE1601_SYS_CTRL_ENABLE_KPC		(1 << 1)
+#define STMPE1601_SYSCON_ENABLE_SPWM		(1 << 0)
+
+/* The 1601/2403 share the same masks */
+#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK	(0x7)
+#define STPME1601_AUTOSLEEP_ENABLE		(1 << 3)
+
+/*
+ * STMPE24xx
+ */
+
+#define STMPE24XX_IRQ_GPIOC		8
+#define STMPE24XX_IRQ_PWM2		7
+#define STMPE24XX_IRQ_PWM1		6
+#define STMPE24XX_IRQ_PWM0		5
+#define STMPE24XX_IRQ_ROT_OVER		4
+#define STMPE24XX_IRQ_ROT		3
+#define STMPE24XX_IRQ_KEYPAD_OVER	2
+#define STMPE24XX_IRQ_KEYPAD		1
+#define STMPE24XX_IRQ_WAKEUP		0
+#define STMPE24XX_NR_INTERNAL_IRQS	9
+
+#define STMPE24XX_REG_SYS_CTRL		0x02
+#define STMPE24XX_REG_ICR_LSB		0x11
+#define STMPE24XX_REG_IER_LSB		0x13
+#define STMPE24XX_REG_ISR_MSB		0x14
+#define STMPE24XX_REG_CHIP_ID		0x80
+#define STMPE24XX_REG_IEGPIOR_LSB	0x18
+#define STMPE24XX_REG_ISGPIOR_MSB	0x19
+#define STMPE24XX_REG_GPMR_LSB		0xA5
+#define STMPE24XX_REG_GPSR_LSB		0x85
+#define STMPE24XX_REG_GPCR_LSB		0x88
+#define STMPE24XX_REG_GPDR_LSB		0x8B
+#define STMPE24XX_REG_GPEDR_MSB		0x8C
+#define STMPE24XX_REG_GPRER_LSB		0x91
+#define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPAFR_U_MSB	0x9B
+
+#define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)
+#define STMPE24XX_SYSCON_ENABLE_PWM		(1 << 2)
+#define STMPE24XX_SYS_CTRL_ENABLE_KPC		(1 << 1)
+#define STMPE24XX_SYSCON_ENABLE_ROT		(1 << 0)
+
+#endif

drivers/mfd/t7l66xb.c

@@ -350,7 +350,6 @@ static int t7l66xb_probe(struct platform_device *dev)
 	t7l66xb->clk48m = clk_get(&dev->dev, "CLK_CK48M");
 	if (IS_ERR(t7l66xb->clk48m)) {
 		ret = PTR_ERR(t7l66xb->clk48m);
-		clk_put(t7l66xb->clk32k);
 		goto err_clk48m_get;
 	}
 
@@ -425,6 +424,8 @@ static int t7l66xb_remove(struct platform_device *dev)
 	ret = pdata->disable(dev);
 	clk_disable(t7l66xb->clk48m);
 	clk_put(t7l66xb->clk48m);
+	clk_disable(t7l66xb->clk32k);
+	clk_put(t7l66xb->clk32k);
 	t7l66xb_detach_irq(dev);
 	iounmap(t7l66xb->scr);
 	release_resource(&t7l66xb->rscr);

drivers/mfd/tc6387xb.c

@@ -137,7 +137,7 @@ static struct mfd_cell tc6387xb_cells[] = {
 	},
 };
 
-static int tc6387xb_probe(struct platform_device *dev)
+static int __devinit tc6387xb_probe(struct platform_device *dev)
 {
 	struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
 	struct resource *iomem, *rscr;
@@ -201,6 +201,7 @@ static int tc6387xb_probe(struct platform_device *dev)
 	if (!ret)
 		return 0;
 
+	iounmap(tc6387xb->scr);
 err_ioremap:
 	release_resource(&tc6387xb->rscr);
 err_resource:
@@ -211,14 +212,17 @@ static int tc6387xb_probe(struct platform_device *dev)
 	return ret;
 }
 
-static int tc6387xb_remove(struct platform_device *dev)
+static int __devexit tc6387xb_remove(struct platform_device *dev)
 {
-	struct clk *clk32k = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
 
 	mfd_remove_devices(&dev->dev);
-	clk_disable(clk32k);
-	clk_put(clk32k);
+	iounmap(tc6387xb->scr);
+	release_resource(&tc6387xb->rscr);
+	clk_disable(tc6387xb->clk32k);
+	clk_put(tc6387xb->clk32k);
 	platform_set_drvdata(dev, NULL);
+	kfree(tc6387xb);
 
 	return 0;
 }
@@ -229,7 +233,7 @@ static struct platform_driver tc6387xb_platform_driver = {
 		.name		= "tc6387xb",
 	},
 	.probe		= tc6387xb_probe,
-	.remove		= tc6387xb_remove,
+	.remove		= __devexit_p(tc6387xb_remove),
 	.suspend        = tc6387xb_suspend,
 	.resume         = tc6387xb_resume,
 };

drivers/mfd/tc6393xb.c

@@ -732,9 +732,9 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	if (tc6393xb->gpio.base != -1)
 		temp = gpiochip_remove(&tc6393xb->gpio);
 	tcpd->disable(dev);
-err_clk_enable:
-	clk_disable(tc6393xb->clk);
 err_enable:
+	clk_disable(tc6393xb->clk);
+err_clk_enable:
 	iounmap(tc6393xb->scr);
 err_ioremap:
 	release_resource(&tc6393xb->rscr);

drivers/mfd/tps6507x.c

@@ -89,10 +89,8 @@ static int tps6507x_i2c_probe(struct i2c_client *i2c,
 	int ret = 0;
 
 	tps6507x = kzalloc(sizeof(struct tps6507x_dev), GFP_KERNEL);
-	if (tps6507x == NULL) {
-		kfree(i2c);
+	if (tps6507x == NULL)
 		return -ENOMEM;
-	}
 
 	i2c_set_clientdata(i2c, tps6507x);
 	tps6507x->dev = &i2c->dev;

drivers/mfd/tps6586x.c

+/*
+ * Core driver for TI TPS6586x PMIC family
+ *
+ * Copyright (c) 2010 CompuLab Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on da903x.c.
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps6586x.h>
+
+/* GPIO control registers */
+#define TPS6586X_GPIOSET1	0x5d
+#define TPS6586X_GPIOSET2	0x5e
+
+/* device id */
+#define TPS6586X_VERSIONCRC	0xcd
+#define TPS658621A_VERSIONCRC	0x15
+
+struct tps6586x {
+	struct mutex		lock;
+	struct device		*dev;
+	struct i2c_client	*client;
+
+	struct gpio_chip	gpio;
+};
+
+static inline int __tps6586x_read(struct i2c_client *client,
+				  int reg, uint8_t *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+		return ret;
+	}
+
+	*val = (uint8_t)ret;
+
+	return 0;
+}
+
+static inline int __tps6586x_reads(struct i2c_client *client, int reg,
+				   int len, uint8_t *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg, len, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed reading from 0x%02x\n", reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline int __tps6586x_write(struct i2c_client *client,
+				 int reg, uint8_t val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n",
+				val, reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline int __tps6586x_writes(struct i2c_client *client, int reg,
+				  int len, uint8_t *val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_i2c_block_data(client, reg, len, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed writings to 0x%02x\n", reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+int tps6586x_write(struct device *dev, int reg, uint8_t val)
+{
+	return __tps6586x_write(to_i2c_client(dev), reg, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_write);
+
+int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val)
+{
+	return __tps6586x_writes(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_writes);
+
+int tps6586x_read(struct device *dev, int reg, uint8_t *val)
+{
+	return __tps6586x_read(to_i2c_client(dev), reg, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_read);
+
+int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val)
+{
+	return __tps6586x_reads(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_reads);
+
+int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+	uint8_t reg_val;
+	int ret = 0;
+
+	mutex_lock(&tps6586x->lock);
+
+	ret = __tps6586x_read(to_i2c_client(dev), reg, &reg_val);
+	if (ret)
+		goto out;
+
+	if ((reg_val & bit_mask) == 0) {
+		reg_val |= bit_mask;
+		ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val);
+	}
+out:
+	mutex_unlock(&tps6586x->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tps6586x_set_bits);
+
+int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+	uint8_t reg_val;
+	int ret = 0;
+
+	mutex_lock(&tps6586x->lock);
+
+	ret = __tps6586x_read(to_i2c_client(dev), reg, &reg_val);
+	if (ret)
+		goto out;
+
+	if (reg_val & bit_mask) {
+		reg_val &= ~bit_mask;
+		ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val);
+	}
+out:
+	mutex_unlock(&tps6586x->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tps6586x_clr_bits);
+
+int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+	uint8_t reg_val;
+	int ret = 0;
+
+	mutex_lock(&tps6586x->lock);
+
+	ret = __tps6586x_read(tps6586x->client, reg, &reg_val);
+	if (ret)
+		goto out;
+
+	if ((reg_val & mask) != val) {
+		reg_val = (reg_val & ~mask) | val;
+		ret = __tps6586x_write(tps6586x->client, reg, reg_val);
+	}
+out:
+	mutex_unlock(&tps6586x->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tps6586x_update);
+
+static int tps6586x_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps6586x *tps6586x = container_of(gc, struct tps6586x, gpio);
+	uint8_t val;
+	int ret;
+
+	ret = __tps6586x_read(tps6586x->client, TPS6586X_GPIOSET2, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & (1 << offset));
+}
+
+
+static void tps6586x_gpio_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	struct tps6586x *tps6586x = container_of(chip, struct tps6586x, gpio);
+
+	__tps6586x_write(tps6586x->client, TPS6586X_GPIOSET2,
+			 value << offset);
+}
+
+static int tps6586x_gpio_output(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	struct tps6586x *tps6586x = container_of(gc, struct tps6586x, gpio);
+	uint8_t val, mask;
+
+	tps6586x_gpio_set(gc, offset, value);
+
+	val = 0x1 << (offset * 2);
+	mask = 0x3 << (offset * 2);
+
+	return tps6586x_update(tps6586x->dev, TPS6586X_GPIOSET1, val, mask);
+}
+
+static void tps6586x_gpio_init(struct tps6586x *tps6586x, int gpio_base)
+{
+	int ret;
+
+	if (!gpio_base)
+		return;
+
+	tps6586x->gpio.owner		= THIS_MODULE;
+	tps6586x->gpio.label		= tps6586x->client->name;
+	tps6586x->gpio.dev		= tps6586x->dev;
+	tps6586x->gpio.base		= gpio_base;
+	tps6586x->gpio.ngpio		= 4;
+	tps6586x->gpio.can_sleep	= 1;
+
+	/* FIXME: add handling of GPIOs as dedicated inputs */
+	tps6586x->gpio.direction_output	= tps6586x_gpio_output;
+	tps6586x->gpio.set		= tps6586x_gpio_set;
+	tps6586x->gpio.get		= tps6586x_gpio_get;
+
+	ret = gpiochip_add(&tps6586x->gpio);
+	if (ret)
+		dev_warn(tps6586x->dev, "GPIO registration failed: %d\n", ret);
+}
+
+static int __remove_subdev(struct device *dev, void *unused)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+static int tps6586x_remove_subdevs(struct tps6586x *tps6586x)
+{
+	return device_for_each_child(tps6586x->dev, NULL, __remove_subdev);
+}
+
+static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
+					  struct tps6586x_platform_data *pdata)
+{
+	struct tps6586x_subdev_info *subdev;
+	struct platform_device *pdev;
+	int i, ret = 0;
+
+	for (i = 0; i < pdata->num_subdevs; i++) {
+		subdev = &pdata->subdevs[i];
+
+		pdev = platform_device_alloc(subdev->name, subdev->id);
+
+		pdev->dev.parent = tps6586x->dev;
+		pdev->dev.platform_data = subdev->platform_data;
+
+		ret = platform_device_add(pdev);
+		if (ret)
+			goto failed;
+	}
+	return 0;
+
+failed:
+	tps6586x_remove_subdevs(tps6586x);
+	return ret;
+}
+
+static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct tps6586x_platform_data *pdata = client->dev.platform_data;
+	struct tps6586x *tps6586x;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&client->dev, "tps6586x requires platform data\n");
+		return -ENOTSUPP;
+	}
+
+	ret = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC);
+	if (ret < 0) {
+		dev_err(&client->dev, "Chip ID read failed: %d\n", ret);
+		return -EIO;
+	}
+
+	if (ret != TPS658621A_VERSIONCRC) {
+		dev_err(&client->dev, "Unsupported chip ID: %x\n", ret);
+		return -ENODEV;
+	}
+
+	tps6586x = kzalloc(sizeof(struct tps6586x), GFP_KERNEL);
+	if (tps6586x == NULL)
+		return -ENOMEM;
+
+	tps6586x->client = client;
+	tps6586x->dev = &client->dev;
+	i2c_set_clientdata(client, tps6586x);
+
+	mutex_init(&tps6586x->lock);
+
+	ret = tps6586x_add_subdevs(tps6586x, pdata);
+	if (ret) {
+		dev_err(&client->dev, "add devices failed: %d\n", ret);
+		goto err_add_devs;
+	}
+
+	tps6586x_gpio_init(tps6586x, pdata->gpio_base);
+
+	return 0;
+
+err_add_devs:
+	kfree(tps6586x);
+	return ret;
+}
+
+static int __devexit tps6586x_i2c_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static const struct i2c_device_id tps6586x_id_table[] = {
+	{ "tps6586x", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tps6586x_id_table);
+
+static struct i2c_driver tps6586x_driver = {
+	.driver	= {
+		.name	= "tps6586x",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= tps6586x_i2c_probe,
+	.remove		= __devexit_p(tps6586x_i2c_remove),
+	.id_table	= tps6586x_id_table,
+};
+
+static int __init tps6586x_init(void)
+{
+	return i2c_add_driver(&tps6586x_driver);
+}
+subsys_initcall(tps6586x_init);
+
+static void __exit tps6586x_exit(void)
+{
+	i2c_del_driver(&tps6586x_driver);
+}
+module_exit(tps6586x_exit);
+
+MODULE_DESCRIPTION("TPS6586X core driver");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL");
+

drivers/mfd/twl6030-pwm.c

+/*
+ * twl6030_pwm.c
+ * Driver for PHOENIX (TWL6030) Pulse Width Modulator
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+#define LED_PWM_CTRL1	0xF4
+#define LED_PWM_CTRL2	0xF5
+
+/* Max value for CTRL1 register */
+#define PWM_CTRL1_MAX	255
+
+/* Pull down disable */
+#define PWM_CTRL2_DIS_PD	(1 << 6)
+
+/* Current control 2.5 milli Amps */
+#define PWM_CTRL2_CURR_02	(2 << 4)
+
+/* LED supply source */
+#define PWM_CTRL2_SRC_VAC	(1 << 2)
+
+/* LED modes */
+#define PWM_CTRL2_MODE_HW	(0 << 0)
+#define PWM_CTRL2_MODE_SW	(1 << 0)
+#define PWM_CTRL2_MODE_DIS	(2 << 0)
+
+#define PWM_CTRL2_MODE_MASK	0x3
+
+struct pwm_device {
+	const char *label;
+	unsigned int pwm_id;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	u8 duty_cycle;
+	int ret;
+
+	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
+
+	if (ret < 0) {
+		pr_err("%s: Failed to configure PWM, Error %d\n",
+			pwm->label, ret);
+		return ret;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	u8 val;
+	int ret;
+
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+	if (ret < 0) {
+		pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
+		return ret;
+	}
+
+	/* Change mode to software control */
+	val &= ~PWM_CTRL2_MODE_MASK;
+	val |= PWM_CTRL2_MODE_SW;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+	if (ret < 0) {
+		pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
+		return ret;
+	}
+
+	twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+	return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	u8 val;
+	int ret;
+
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+	if (ret < 0) {
+		pr_err("%s: Failed to disable PWM, Error %d\n",
+			pwm->label, ret);
+		return;
+	}
+
+	val &= ~PWM_CTRL2_MODE_MASK;
+	val |= PWM_CTRL2_MODE_HW;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+	if (ret < 0) {
+		pr_err("%s: Failed to disable PWM, Error %d\n",
+			pwm->label, ret);
+		return;
+	}
+	return;
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	u8 val;
+	int ret;
+	struct pwm_device *pwm;
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		pr_err("%s: failed to allocate memory\n", label);
+		return NULL;
+	}
+
+	pwm->label = label;
+	pwm->pwm_id = pwm_id;
+
+	/* Configure PWM */
+	val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
+		PWM_CTRL2_MODE_HW;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+
+	if (ret < 0) {
+		pr_err("%s: Failed to configure PWM, Error %d\n",
+			 pwm->label, ret);
+
+		kfree(pwm);
+		return NULL;
+	}
+
+	return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+	pwm_disable(pwm);
+	kfree(pwm);
+}
+EXPORT_SYMBOL(pwm_free);

drivers/mfd/ucb1400_core.c

@@ -114,7 +114,7 @@ static int ucb1400_core_probe(struct device *dev)
 err3:
 	platform_device_put(ucb->ucb1400_ts);
 err2:
-	platform_device_unregister(ucb->ucb1400_gpio);
+	platform_device_del(ucb->ucb1400_gpio);
 err1:
 	platform_device_put(ucb->ucb1400_gpio);
 err0:

drivers/mfd/wm831x-core.c

@@ -95,6 +95,7 @@ enum wm831x_parent {
 	WM8311 = 0x8311,
 	WM8312 = 0x8312,
 	WM8320 = 0x8320,
+	WM8321 = 0x8321,
 };
 
 static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
@@ -1533,6 +1534,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 		dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev);
 		break;
 
+	case WM8321:
+		parent = WM8321;
+		wm831x->num_gpio = 12;
+		dev_info(wm831x->dev, "WM8321 revision %c\n", 'A' + rev);
+		break;
+
 	default:
 		dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
 		ret = -EINVAL;
@@ -1607,6 +1614,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 				      NULL, 0);
 		break;
 
+	case WM8321:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8320_devs, ARRAY_SIZE(wm8320_devs),
+				      NULL, 0);
+		break;
+
 	default:
 		/* If this happens the bus probe function is buggy */
 		BUG();
@@ -1744,10 +1757,8 @@ static int wm831x_i2c_probe(struct i2c_client *i2c,
 	struct wm831x *wm831x;
 
 	wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
-	if (wm831x == NULL) {
-		kfree(i2c);
+	if (wm831x == NULL)
 		return -ENOMEM;
-	}
 
 	i2c_set_clientdata(i2c, wm831x);
 	wm831x->dev = &i2c->dev;
@@ -1779,6 +1790,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = {
 	{ "wm8311", WM8311 },
 	{ "wm8312", WM8312 },
 	{ "wm8320", WM8320 },
+	{ "wm8321", WM8321 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);

drivers/mfd/wm8350-core.c

@@ -536,6 +536,7 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
 	}
 
 out:
+	kfree(wm8350->reg_cache);
 	return ret;
 }
 
@@ -700,7 +701,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 	ret = wm8350_irq_init(wm8350, irq, pdata);
 	if (ret < 0)
-		goto err;
+		goto err_free;
 
 	if (wm8350->irq_base) {
 		ret = request_threaded_irq(wm8350->irq_base +
@@ -738,8 +739,9 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 err_irq:
 	wm8350_irq_exit(wm8350);
-err:
+err_free:
 	kfree(wm8350->reg_cache);
+err:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(wm8350_device_init);

drivers/mfd/wm8994-core.c

@@ -326,8 +326,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
 	wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
 				   ARRAY_SIZE(wm8994_main_supplies),
 				   GFP_KERNEL);
-	if (!wm8994->supplies)
+	if (!wm8994->supplies) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
 		wm8994->supplies[i].supply = wm8994_main_supplies[i];
@@ -495,10 +497,8 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
 	struct wm8994 *wm8994;
 
 	wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL);
-	if (wm8994 == NULL) {
-		kfree(i2c);
+	if (wm8994 == NULL)
 		return -ENOMEM;
-	}
 
 	i2c_set_clientdata(i2c, wm8994);
 	wm8994->dev = &i2c->dev;

include/linux/jz4740-adc.h

+
+#ifndef __LINUX_JZ4740_ADC
+#define __LINUX_JZ4740_ADC
+
+#include <linux/device.h>
+
+/*
+ * jz4740_adc_set_config - Configure a JZ4740 adc device
+ * @dev: Pointer to a jz4740-adc device
+ * @mask: Mask for the config value to be set
+ * @val: Value to be set
+ *
+ * This function can be used by the JZ4740 ADC mfd cells to configure their
+ * options in the shared config register.
+*/
+int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val);
+
+#define JZ_ADC_CONFIG_SPZZ		BIT(31)
+#define JZ_ADC_CONFIG_EX_IN		BIT(30)
+#define JZ_ADC_CONFIG_DNUM_MASK		(0x7 << 16)
+#define JZ_ADC_CONFIG_DMA_ENABLE	BIT(15)
+#define JZ_ADC_CONFIG_XYZ_MASK		(0x2 << 13)
+#define JZ_ADC_CONFIG_SAMPLE_NUM_MASK	(0x7 << 10)
+#define JZ_ADC_CONFIG_CLKDIV_MASK	(0xf << 5)
+#define JZ_ADC_CONFIG_BAT_MB		BIT(4)
+
+#define JZ_ADC_CONFIG_DNUM(dnum)	((dnum) << 16)
+#define JZ_ADC_CONFIG_XYZ_OFFSET(dnum)	((xyz) << 13)
+#define JZ_ADC_CONFIG_SAMPLE_NUM(x)	((x) << 10)
+#define JZ_ADC_CONFIG_CLKDIV(div)	((div) << 5)
+
+#endif

include/linux/mfd/mc13783-private.h

-/*
- * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Initial development of this code was funded by
- * Phytec Messtechnik GmbH, http://www.phytec.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_MFD_MC13783_PRIV_H
-#define __LINUX_MFD_MC13783_PRIV_H
-
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-
-struct mc13783 {
-	struct spi_device *spidev;
-	struct mutex lock;
-	int irq;
-	int flags;
-
-	irq_handler_t irqhandler[MC13783_NUM_IRQ];
-	void *irqdata[MC13783_NUM_IRQ];
-
-	/* XXX these should go as platformdata to the regulator subdevice */
-	struct mc13783_regulator_init_data *regulators;
-	int num_regulators;
-};
-
-#define MC13783_REG_INTERRUPT_STATUS_0		 0
-#define MC13783_REG_INTERRUPT_MASK_0		 1
-#define MC13783_REG_INTERRUPT_SENSE_0		 2
-#define MC13783_REG_INTERRUPT_STATUS_1		 3
-#define MC13783_REG_INTERRUPT_MASK_1		 4
-#define MC13783_REG_INTERRUPT_SENSE_1		 5
-#define MC13783_REG_POWER_UP_MODE_SENSE		 6
-#define MC13783_REG_REVISION			 7
-#define MC13783_REG_SEMAPHORE			 8
-#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9
-#define MC13783_REG_ARBITRATION_SWITCHERS	10
-#define MC13783_REG_ARBITRATION_REGULATORS_0	11
-#define MC13783_REG_ARBITRATION_REGULATORS_1	12
-#define MC13783_REG_POWER_CONTROL_0		13
-#define MC13783_REG_POWER_CONTROL_1		14
-#define MC13783_REG_POWER_CONTROL_2		15
-#define MC13783_REG_REGEN_ASSIGNMENT		16
-#define MC13783_REG_CONTROL_SPARE		17
-#define MC13783_REG_MEMORY_A			18
-#define MC13783_REG_MEMORY_B			19
-#define MC13783_REG_RTC_TIME			20
-#define MC13783_REG_RTC_ALARM			21
-#define MC13783_REG_RTC_DAY			22
-#define MC13783_REG_RTC_DAY_ALARM		23
-#define MC13783_REG_SWITCHERS_0			24
-#define MC13783_REG_SWITCHERS_1			25
-#define MC13783_REG_SWITCHERS_2			26
-#define MC13783_REG_SWITCHERS_3			27
-#define MC13783_REG_SWITCHERS_4			28
-#define MC13783_REG_SWITCHERS_5			29
-#define MC13783_REG_REGULATOR_SETTING_0		30
-#define MC13783_REG_REGULATOR_SETTING_1		31
-#define MC13783_REG_REGULATOR_MODE_0		32
-#define MC13783_REG_REGULATOR_MODE_1		33
-#define MC13783_REG_POWER_MISCELLANEOUS		34
-#define MC13783_REG_POWER_SPARE			35
-#define MC13783_REG_AUDIO_RX_0			36
-#define MC13783_REG_AUDIO_RX_1			37
-#define MC13783_REG_AUDIO_TX			38
-#define MC13783_REG_AUDIO_SSI_NETWORK		39
-#define MC13783_REG_AUDIO_CODEC			40
-#define MC13783_REG_AUDIO_STEREO_DAC		41
-#define MC13783_REG_AUDIO_SPARE			42
-#define MC13783_REG_ADC_0			43
-#define MC13783_REG_ADC_1			44
-#define MC13783_REG_ADC_2			45
-#define MC13783_REG_ADC_3			46
-#define MC13783_REG_ADC_4			47
-#define MC13783_REG_CHARGER			48
-#define MC13783_REG_USB				49
-#define MC13783_REG_CHARGE_USB_SPARE		50
-#define MC13783_REG_LED_CONTROL_0		51
-#define MC13783_REG_LED_CONTROL_1		52
-#define MC13783_REG_LED_CONTROL_2		53
-#define MC13783_REG_LED_CONTROL_3		54
-#define MC13783_REG_LED_CONTROL_4		55
-#define MC13783_REG_LED_CONTROL_5		56
-#define MC13783_REG_SPARE			57
-#define MC13783_REG_TRIM_0			58
-#define MC13783_REG_TRIM_1			59
-#define MC13783_REG_TEST_0			60
-#define MC13783_REG_TEST_1			61
-#define MC13783_REG_TEST_2			62
-#define MC13783_REG_TEST_3			63
-#define MC13783_REG_NB				64
-
-/*
- * Reg Regulator Mode 0
- */
-#define MC13783_REGCTRL_VAUDIO_EN	(1 << 0)
-#define MC13783_REGCTRL_VAUDIO_STBY	(1 << 1)
-#define MC13783_REGCTRL_VAUDIO_MODE	(1 << 2)
-#define MC13783_REGCTRL_VIOHI_EN	(1 << 3)
-#define MC13783_REGCTRL_VIOHI_STBY	(1 << 4)
-#define MC13783_REGCTRL_VIOHI_MODE	(1 << 5)
-#define MC13783_REGCTRL_VIOLO_EN	(1 << 6)
-#define MC13783_REGCTRL_VIOLO_STBY 	(1 << 7)
-#define MC13783_REGCTRL_VIOLO_MODE	(1 << 8)
-#define MC13783_REGCTRL_VDIG_EN		(1 << 9)
-#define MC13783_REGCTRL_VDIG_STBY	(1 << 10)
-#define MC13783_REGCTRL_VDIG_MODE	(1 << 11)
-#define MC13783_REGCTRL_VGEN_EN		(1 << 12)
-#define MC13783_REGCTRL_VGEN_STBY	(1 << 13)
-#define MC13783_REGCTRL_VGEN_MODE	(1 << 14)
-#define MC13783_REGCTRL_VRFDIG_EN	(1 << 15)
-#define MC13783_REGCTRL_VRFDIG_STBY	(1 << 16)
-#define MC13783_REGCTRL_VRFDIG_MODE	(1 << 17)
-#define MC13783_REGCTRL_VRFREF_EN	(1 << 18)
-#define MC13783_REGCTRL_VRFREF_STBY	(1 << 19)
-#define MC13783_REGCTRL_VRFREF_MODE	(1 << 20)
-#define MC13783_REGCTRL_VRFCP_EN	(1 << 21)
-#define MC13783_REGCTRL_VRFCP_STBY	(1 << 22)
-#define MC13783_REGCTRL_VRFCP_MODE	(1 << 23)
-
-/*
- * Reg Regulator Mode 1
- */
-#define MC13783_REGCTRL_VSIM_EN		(1 << 0)
-#define MC13783_REGCTRL_VSIM_STBY	(1 << 1)
-#define MC13783_REGCTRL_VSIM_MODE	(1 << 2)
-#define MC13783_REGCTRL_VESIM_EN	(1 << 3)
-#define MC13783_REGCTRL_VESIM_STBY	(1 << 4)
-#define MC13783_REGCTRL_VESIM_MODE	(1 << 5)
-#define MC13783_REGCTRL_VCAM_EN		(1 << 6)
-#define MC13783_REGCTRL_VCAM_STBY	(1 << 7)
-#define MC13783_REGCTRL_VCAM_MODE	(1 << 8)
-#define	MC13783_REGCTRL_VRFBG_EN	(1 << 9)
-#define MC13783_REGCTRL_VRFBG_STBY	(1 << 10)
-#define MC13783_REGCTRL_VVIB_EN		(1 << 11)
-#define MC13783_REGCTRL_VRF1_EN		(1 << 12)
-#define MC13783_REGCTRL_VRF1_STBY	(1 << 13)
-#define MC13783_REGCTRL_VRF1_MODE	(1 << 14)
-#define MC13783_REGCTRL_VRF2_EN		(1 << 15)
-#define MC13783_REGCTRL_VRF2_STBY	(1 << 16)
-#define MC13783_REGCTRL_VRF2_MODE	(1 << 17)
-#define MC13783_REGCTRL_VMMC1_EN	(1 << 18)
-#define MC13783_REGCTRL_VMMC1_STBY	(1 << 19)
-#define MC13783_REGCTRL_VMMC1_MODE	(1 << 20)
-#define MC13783_REGCTRL_VMMC2_EN	(1 << 21)
-#define MC13783_REGCTRL_VMMC2_STBY	(1 << 22)
-#define MC13783_REGCTRL_VMMC2_MODE	(1 << 23)
-
-/*
- * Reg Regulator Misc.
- */
-#define MC13783_REGCTRL_GPO1_EN		(1 << 6)
-#define MC13783_REGCTRL_GPO2_EN		(1 << 8)
-#define MC13783_REGCTRL_GPO3_EN		(1 << 10)
-#define MC13783_REGCTRL_GPO4_EN		(1 << 12)
-#define MC13783_REGCTRL_VIBPINCTRL	(1 << 14)
-
-/*
- * Reg Switcher 4
- */
-#define MC13783_SWCTRL_SW1A_MODE	(1 << 0)
-#define MC13783_SWCTRL_SW1A_STBY_MODE	(1 << 2)
-#define MC13783_SWCTRL_SW1A_DVS_SPEED	(1 << 6)
-#define MC13783_SWCTRL_SW1A_PANIC_MODE	(1 << 8)
-#define MC13783_SWCTRL_SW1A_SOFTSTART	(1 << 9)
-#define MC13783_SWCTRL_SW1B_MODE	(1 << 10)
-#define MC13783_SWCTRL_SW1B_STBY_MODE	(1 << 12)
-#define MC13783_SWCTRL_SW1B_DVS_SPEED	(1 << 14)
-#define MC13783_SWCTRL_SW1B_PANIC_MODE	(1 << 16)
-#define MC13783_SWCTRL_SW1B_SOFTSTART	(1 << 17)
-#define MC13783_SWCTRL_PLL_EN		(1 << 18)
-#define MC13783_SWCTRL_PLL_FACTOR	(1 << 19)
-
-/*
- * Reg Switcher 5
- */
-#define MC13783_SWCTRL_SW2A_MODE	(1 << 0)
-#define MC13783_SWCTRL_SW2A_STBY_MODE	(1 << 2)
-#define MC13783_SWCTRL_SW2A_DVS_SPEED	(1 << 6)
-#define MC13783_SWCTRL_SW2A_PANIC_MODE	(1 << 8)
-#define MC13783_SWCTRL_SW2A_SOFTSTART	(1 << 9)
-#define MC13783_SWCTRL_SW2B_MODE	(1 << 10)
-#define MC13783_SWCTRL_SW2B_STBY_MODE	(1 << 12)
-#define MC13783_SWCTRL_SW2B_DVS_SPEED	(1 << 14)
-#define MC13783_SWCTRL_SW2B_PANIC_MODE	(1 << 16)
-#define MC13783_SWCTRL_SW2B_SOFTSTART	(1 << 17)
-#define MC13783_SWSET_SW3		(1 << 18)
-#define MC13783_SWCTRL_SW3_EN		(1 << 20)
-#define MC13783_SWCTRL_SW3_STBY		(1 << 21)
-#define MC13783_SWCTRL_SW3_MODE		(1 << 22)
-
-static inline int mc13783_set_bits(struct mc13783 *mc13783, unsigned int offset,
-		u32 mask, u32 val)
-{
-	int ret;
-	mc13783_lock(mc13783);
-	ret = mc13783_reg_rmw(mc13783, offset, mask, val);
-	mc13783_unlock(mc13783);
-
-	return ret;
-}
-
-#endif /* __LINUX_MFD_MC13783_PRIV_H */

include/linux/mfd/mc13783.h

@@ -21,6 +21,8 @@ int mc13783_reg_write(struct mc13783 *mc13783, unsigned int offset, u32 val);
 int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset,
 		u32 mask, u32 val);
 
+int mc13783_get_flags(struct mc13783 *mc13783);
+
 int mc13783_irq_request(struct mc13783 *mc13783, int irq,
 		irq_handler_t handler, const char *name, void *dev);
 int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,

include/linux/mfd/stmpe.h

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __LINUX_MFD_STMPE_H
+#define __LINUX_MFD_STMPE_H
+
+#include <linux/device.h>
+
+enum stmpe_block {
+	STMPE_BLOCK_GPIO	= 1 << 0,
+	STMPE_BLOCK_KEYPAD	= 1 << 1,
+	STMPE_BLOCK_TOUCHSCREEN	= 1 << 2,
+	STMPE_BLOCK_ADC		= 1 << 3,
+	STMPE_BLOCK_PWM		= 1 << 4,
+	STMPE_BLOCK_ROTATOR	= 1 << 5,
+};
+
+enum stmpe_partnum {
+	STMPE811,
+	STMPE1601,
+	STMPE2401,
+	STMPE2403,
+};
+
+/*
+ * For registers whose locations differ on variants,  the correct address is
+ * obtained by indexing stmpe->regs with one of the following.
+ */
+enum {
+	STMPE_IDX_CHIP_ID,
+	STMPE_IDX_ICR_LSB,
+	STMPE_IDX_IER_LSB,
+	STMPE_IDX_ISR_MSB,
+	STMPE_IDX_GPMR_LSB,
+	STMPE_IDX_GPSR_LSB,
+	STMPE_IDX_GPCR_LSB,
+	STMPE_IDX_GPDR_LSB,
+	STMPE_IDX_GPEDR_MSB,
+	STMPE_IDX_GPRER_LSB,
+	STMPE_IDX_GPFER_LSB,
+	STMPE_IDX_GPAFR_U_MSB,
+	STMPE_IDX_IEGPIOR_LSB,
+	STMPE_IDX_ISGPIOR_MSB,
+	STMPE_IDX_MAX,
+};
+
+
+struct stmpe_variant_info;
+
+/**
+ * struct stmpe - STMPE MFD structure
+ * @lock: lock protecting I/O operations
+ * @irq_lock: IRQ bus lock
+ * @dev: device, mostly for dev_dbg()
+ * @i2c: i2c client
+ * @variant: the detected STMPE model number
+ * @regs: list of addresses of registers which are at different addresses on
+ *	  different variants.  Indexed by one of STMPE_IDX_*.
+ * @irq_base: starting IRQ number for internal IRQs
+ * @num_gpios: number of gpios, differs for variants
+ * @ier: cache of IER registers for bus_lock
+ * @oldier: cache of IER registers for bus_lock
+ * @pdata: platform data
+ */
+struct stmpe {
+	struct mutex lock;
+	struct mutex irq_lock;
+	struct device *dev;
+	struct i2c_client *i2c;
+	enum stmpe_partnum partnum;
+	struct stmpe_variant_info *variant;
+	const u8 *regs;
+
+	int irq_base;
+	int num_gpios;
+	u8 ier[2];
+	u8 oldier[2];
+	struct stmpe_platform_data *pdata;
+};
+
+extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
+extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
+extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
+			    u8 *values);
+extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+			     const u8 *values);
+extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
+extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
+			     enum stmpe_block block);
+extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
+extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
+
+struct matrix_keymap_data;
+
+/**
+ * struct stmpe_keypad_platform_data - STMPE keypad platform data
+ * @keymap_data: key map table and size
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ */
+struct stmpe_keypad_platform_data {
+	struct matrix_keymap_data *keymap_data;
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
+};
+
+/**
+ * struct stmpe_gpio_platform_data - STMPE GPIO platform data
+ * @gpio_base: first gpio number assigned.  A maximum of
+ *	       %STMPE_NR_GPIOS GPIOs will be allocated.
+ */
+struct stmpe_gpio_platform_data {
+	int gpio_base;
+	void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
+	void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
+};
+
+/**
+ * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
+ * data
+ * @sample_time: ADC converstion time in number of clock.
+ * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
+ * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
+ * recommended is 4.
+ * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+ * @ref_sel: ADC reference source
+ * (0 -> internal reference, 1 -> external reference)
+ * @adc_freq: ADC Clock speed
+ * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+ * @ave_ctrl: Sample average control
+ * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
+ * @touch_det_delay: Touch detect interrupt delay
+ * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
+ * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
+ * recommended is 3
+ * @settling: Panel driver settling time
+ * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
+ * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
+ * recommended is 2
+ * @fraction_z: Length of the fractional part in z
+ * (fraction_z ([0..7]) = Count of the fractional part)
+ * recommended is 7
+ * @i_drive: current limit value of the touchscreen drivers
+ * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
+ *
+ * */
+struct stmpe_ts_platform_data {
+       u8 sample_time;
+       u8 mod_12b;
+       u8 ref_sel;
+       u8 adc_freq;
+       u8 ave_ctrl;
+       u8 touch_det_delay;
+       u8 settling;
+       u8 fraction_z;
+       u8 i_drive;
+};
+
+/**
+ * struct stmpe_platform_data - STMPE platform data
+ * @id: device id to distinguish between multiple STMPEs on the same board
+ * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
+ * @irq_trigger: IRQ trigger to use for the interrupt to the host
+ * @irq_invert_polarity: IRQ line is connected with reversed polarity
+ * @autosleep: bool to enable/disable stmpe autosleep
+ * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
+ * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
+ *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ * @ts: touchscreen-specific platform data
+ */
+struct stmpe_platform_data {
+	int id;
+	unsigned int blocks;
+	int irq_base;
+	unsigned int irq_trigger;
+	bool irq_invert_polarity;
+	bool autosleep;
+	int autosleep_timeout;
+
+	struct stmpe_gpio_platform_data *gpio;
+	struct stmpe_keypad_platform_data *keypad;
+	struct stmpe_ts_platform_data *ts;
+};
+
+#define STMPE_NR_INTERNAL_IRQS	9
+#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
+
+#define STMPE_NR_GPIOS		24
+#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#endif

include/linux/mfd/tps6586x.h

+#ifndef __LINUX_MFD_TPS6586X_H
+#define __LINUX_MFD_TPS6586X_H
+
+enum {
+	TPS6586X_ID_SM_0,
+	TPS6586X_ID_SM_1,
+	TPS6586X_ID_SM_2,
+	TPS6586X_ID_LDO_0,
+	TPS6586X_ID_LDO_1,
+	TPS6586X_ID_LDO_2,
+	TPS6586X_ID_LDO_3,
+	TPS6586X_ID_LDO_4,
+	TPS6586X_ID_LDO_5,
+	TPS6586X_ID_LDO_6,
+	TPS6586X_ID_LDO_7,
+	TPS6586X_ID_LDO_8,
+	TPS6586X_ID_LDO_9,
+	TPS6586X_ID_LDO_RTC,
+};
+
+struct tps6586x_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct tps6586x_platform_data {
+	int num_subdevs;
+	struct tps6586x_subdev_info *subdevs;
+
+	int gpio_base;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS6586X sub-device drivers
+ */
+extern int tps6586x_write(struct device *dev, int reg, uint8_t val);
+extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_read(struct device *dev, int reg, uint8_t *val);
+extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_update(struct device *dev, int reg, uint8_t val,
+			   uint8_t mask);
+
+#endif /*__LINUX_MFD_TPS6586X_H */

include/linux/mfd/wm8994/gpio.h

@@ -36,6 +36,10 @@
 #define WM8994_GP_FN_WSEQ_STATUS    16
 #define WM8994_GP_FN_FIFO_ERROR     17
 #define WM8994_GP_FN_OPCLK          18
+#define WM8994_GP_FN_THW	    19
+#define WM8994_GP_FN_DCS_DONE	    20
+#define WM8994_GP_FN_FLL1_OUT       21
+#define WM8994_GP_FN_FLL2_OUT       22
 
 #define WM8994_GPN_DIR                          0x8000  /* GPN_DIR */
 #define WM8994_GPN_DIR_MASK                     0x8000  /* GPN_DIR */