net: phy: broadcom: Add LPI counter

Add the ability to read the PHY maintained LPI counter which is in the
Clause 45 vendor space, device address 7, offset 0x803F. The counter is
cleared on read.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230531231729.1873932-1-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/bcm-phy-lib.c

@@ -496,18 +496,20 @@ EXPORT_SYMBOL_GPL(bcm_phy_downshift_set);
 
 struct bcm_phy_hw_stat {
 	const char *string;
-	u8 reg;
+	int devad;
+	u16 reg;
 	u8 shift;
 	u8 bits;
 };
 
 /* Counters freeze at either 0xffff or 0xff, better than nothing */
 static const struct bcm_phy_hw_stat bcm_phy_hw_stats[] = {
-	{ "phy_receive_errors", MII_BRCM_CORE_BASE12, 0, 16 },
-	{ "phy_serdes_ber_errors", MII_BRCM_CORE_BASE13, 8, 8 },
-	{ "phy_false_carrier_sense_errors", MII_BRCM_CORE_BASE13, 0, 8 },
-	{ "phy_local_rcvr_nok", MII_BRCM_CORE_BASE14, 8, 8 },
-	{ "phy_remote_rcv_nok", MII_BRCM_CORE_BASE14, 0, 8 },
+	{ "phy_receive_errors", -1, MII_BRCM_CORE_BASE12, 0, 16 },
+	{ "phy_serdes_ber_errors", -1, MII_BRCM_CORE_BASE13, 8, 8 },
+	{ "phy_false_carrier_sense_errors", -1, MII_BRCM_CORE_BASE13, 0, 8 },
+	{ "phy_local_rcvr_nok", -1, MII_BRCM_CORE_BASE14, 8, 8 },
+	{ "phy_remote_rcv_nok", -1, MII_BRCM_CORE_BASE14, 0, 8 },
+	{ "phy_lpi_count", MDIO_MMD_AN, BRCM_CL45VEN_EEE_LPI_CNT, 0, 16 },
 };
 
 int bcm_phy_get_sset_count(struct phy_device *phydev)
@@ -536,7 +538,10 @@ static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow,
 	int val;
 	u64 ret;
 
-	val = phy_read(phydev, stat.reg);
+	if (stat.devad < 0)
+		val = phy_read(phydev, stat.reg);
+	else
+		val = phy_read_mmd(phydev, stat.devad, stat.reg);
 	if (val < 0) {
 		ret = U64_MAX;
 	} else {

include/linux/brcmphy.h

@@ -359,6 +359,8 @@
 #define LPI_FEATURE_EN			0x8000
 #define LPI_FEATURE_EN_DIG1000X		0x4000
 
+#define BRCM_CL45VEN_EEE_LPI_CNT	0x803f
+
 /* Core register definitions*/
 #define MII_BRCM_CORE_BASE12	0x12
 #define MII_BRCM_CORE_BASE13	0x13