Skip to content

L
linux
Commit f65ac45e authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  x86, mce: do not compile mcelog message on AMD
  EDAC, AMD: decode FR MCEs
  EDAC, AMD: decode load store MCEs
  EDAC, AMD: decode bus unit MCEs
  EDAC, AMD: decode instruction cache MCEs
  EDAC, AMD: decode data cache MCEs
  EDAC, AMD: carve out decoding of MCi_STATUS ErrorCode
  EDAC, AMD: carve out MCi_STATUS decoding
  x86, mce: pass mce info to EDAC for decoding
  amd64_edac: cleanup amd64_decode_bus_error
  amd64_edac: remove memory and GART TLB error decoders
  amd64_edac: cleanup/complete NB MCE decoding
  amd64_edac: cleanup amd64_process_error_info
  EDAC: beef up ErrorCodeExt error signatures
  EDAC: move MCE error descriptions to EDAC core
parents 4142e0d1 22223c9b
Hide whitespace changes
Inline Side-by-side
Showing with 619 additions and 452 deletions
arch/x86/kernel/cpu/mcheck/mce.c
View file @ f65ac45e
......@@ -183,6 +183,11 @@ void mce_log(struct mce *mce)
set_bit(0, &mce_need_notify);
}
void __weak decode_mce(struct mce *m)
{
return;
}
static void print_mce(struct mce *m)
{
printk(KERN_EMERG
......@@ -205,6 +210,8 @@ static void print_mce(struct mce *m)
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
decode_mce(m);
}
static void print_mce_head(void)
......@@ -215,7 +222,10 @@ static void print_mce_head(void)
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
"Run through mcelog --ascii to decode and contact your hardware vendor\n");
#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
"Run through mcelog --ascii to decode and contact your hardware vendor\n"
#endif
);
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
......
drivers/edac/Makefile
View file @ f65ac45e
......@@ -17,6 +17,10 @@ ifdef CONFIG_PCI
edac_core-objs += edac_pci.o edac_pci_sysfs.o
endif
ifdef CONFIG_CPU_SUP_AMD
edac_core-objs += edac_mce_amd.o
endif
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
......@@ -32,7 +36,7 @@ obj-$(CONFIG_EDAC_X38) += x38_edac.o
obj-$(CONFIG_EDAC_I82860) += i82860_edac.o
obj-$(CONFIG_EDAC_R82600) += r82600_edac.o
amd64_edac_mod-y := amd64_edac_err_types.o amd64_edac.o
amd64_edac_mod-y := amd64_edac.o
amd64_edac_mod-$(CONFIG_EDAC_DEBUG) += amd64_edac_dbg.o
amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
......
drivers/edac/amd64_edac.c
View file @ f65ac45e
......@@ -18,6 +18,63 @@ struct amd64_pvt;
static struct mem_ctl_info *mci_lookup[MAX_NUMNODES];
static struct amd64_pvt *pvt_lookup[MAX_NUMNODES];
/*
* See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
* for DDR2 DRAM mapping.
*/
u32 revf_quad_ddr2_shift[] = {
0, /* 0000b NULL DIMM (128mb) */
28, /* 0001b 256mb */
29, /* 0010b 512mb */
29, /* 0011b 512mb */
29, /* 0100b 512mb */
30, /* 0101b 1gb */
30, /* 0110b 1gb */
31, /* 0111b 2gb */
31, /* 1000b 2gb */
32, /* 1001b 4gb */
32, /* 1010b 4gb */
33, /* 1011b 8gb */
0, /* 1100b future */
0, /* 1101b future */
0, /* 1110b future */
0 /* 1111b future */
};
/*
* Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
* bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
* or higher value'.
*
*FIXME: Produce a better mapping/linearisation.
*/
struct scrubrate scrubrates[] = {
{ 0x01, 1600000000UL},
{ 0x02, 800000000UL},
{ 0x03, 400000000UL},
{ 0x04, 200000000UL},
{ 0x05, 100000000UL},
{ 0x06, 50000000UL},
{ 0x07, 25000000UL},
{ 0x08, 12284069UL},
{ 0x09, 6274509UL},
{ 0x0A, 3121951UL},
{ 0x0B, 1560975UL},
{ 0x0C, 781440UL},
{ 0x0D, 390720UL},
{ 0x0E, 195300UL},
{ 0x0F, 97650UL},
{ 0x10, 48854UL},
{ 0x11, 24427UL},
{ 0x12, 12213UL},
{ 0x13, 6101UL},
{ 0x14, 3051UL},
{ 0x15, 1523UL},
{ 0x16, 761UL},
{ 0x00, 0UL}, /* scrubbing off */
};
/*
* Memory scrubber control interface. For K8, memory scrubbing is handled by
* hardware and can involve L2 cache, dcache as well as the main memory. With
......@@ -693,7 +750,7 @@ static void find_csrow_limits(struct mem_ctl_info *mci, int csrow,
* specific.
*/
static u64 extract_error_address(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
struct err_regs *info)
{
struct amd64_pvt *pvt = mci->pvt_info;
......@@ -1049,7 +1106,7 @@ static int k8_early_channel_count(struct amd64_pvt *pvt)
/* extract the ERROR ADDRESS for the K8 CPUs */
static u64 k8_get_error_address(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
struct err_regs *info)
{
return (((u64) (info->nbeah & 0xff)) << 32) +
(info->nbeal & ~0x03);
......@@ -1092,7 +1149,7 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
}
static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info,
struct err_regs *info,
u64 SystemAddress)
{
struct mem_ctl_info *src_mci;
......@@ -1101,8 +1158,8 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
u32 page, offset;
/* Extract the syndrome parts and form a 16-bit syndrome */
syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
syndrome = HIGH_SYNDROME(info->nbsl) << 8;
syndrome |= LOW_SYNDROME(info->nbsh);
/* CHIPKILL enabled */
if (info->nbcfg & K8_NBCFG_CHIPKILL) {
......@@ -1311,7 +1368,7 @@ static void amd64_teardown(struct amd64_pvt *pvt)
}
static u64 f10_get_error_address(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
struct err_regs *info)
{
return (((u64) (info->nbeah & 0xffff)) << 32) +
(info->nbeal & ~0x01);
......@@ -1688,7 +1745,7 @@ static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
* The @sys_addr is usually an error address received from the hardware.
*/
static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info,
struct err_regs *info,
u64 sys_addr)
{
struct amd64_pvt *pvt = mci->pvt_info;
......@@ -1701,8 +1758,8 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
if (csrow >= 0) {
error_address_to_page_and_offset(sys_addr, &page, &offset);
syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
syndrome = HIGH_SYNDROME(info->nbsl) << 8;
syndrome |= LOW_SYNDROME(info->nbsh);
/*
* Is CHIPKILL on? If so, then we can attempt to use the
......@@ -2045,7 +2102,7 @@ static int get_channel_from_ecc_syndrome(unsigned short syndrome)
* - 0: if no valid error is indicated
*/
static int amd64_get_error_info_regs(struct mem_ctl_info *mci,
struct amd64_error_info_regs *regs)
struct err_regs *regs)
{
struct amd64_pvt *pvt;
struct pci_dev *misc_f3_ctl;
......@@ -2094,10 +2151,10 @@ static int amd64_get_error_info_regs(struct mem_ctl_info *mci,
* - 0: if no error is found
*/
static int amd64_get_error_info(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
struct err_regs *info)
{
struct amd64_pvt *pvt;
struct amd64_error_info_regs regs;
struct err_regs regs;
pvt = mci->pvt_info;
......@@ -2152,48 +2209,12 @@ static int amd64_get_error_info(struct mem_ctl_info *mci,
return 1;
}
static inline void amd64_decode_gart_tlb_error(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
{
u32 err_code;
u32 ec_tt; /* error code transaction type (2b) */
u32 ec_ll; /* error code cache level (2b) */
err_code = EXTRACT_ERROR_CODE(info->nbsl);
ec_ll = EXTRACT_LL_CODE(err_code);
ec_tt = EXTRACT_TT_CODE(err_code);
amd64_mc_printk(mci, KERN_ERR,
"GART TLB event: transaction type(%s), "
"cache level(%s)\n", tt_msgs[ec_tt], ll_msgs[ec_ll]);
}
static inline void amd64_decode_mem_cache_error(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
{
u32 err_code;
u32 ec_rrrr; /* error code memory transaction (4b) */
u32 ec_tt; /* error code transaction type (2b) */
u32 ec_ll; /* error code cache level (2b) */
err_code = EXTRACT_ERROR_CODE(info->nbsl);
ec_ll = EXTRACT_LL_CODE(err_code);
ec_tt = EXTRACT_TT_CODE(err_code);
ec_rrrr = EXTRACT_RRRR_CODE(err_code);
amd64_mc_printk(mci, KERN_ERR,
"cache hierarchy error: memory transaction type(%s), "
"transaction type(%s), cache level(%s)\n",
rrrr_msgs[ec_rrrr], tt_msgs[ec_tt], ll_msgs[ec_ll]);
}
/*
* Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR
* ADDRESS and process.
*/
static void amd64_handle_ce(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
struct err_regs *info)
{
struct amd64_pvt *pvt = mci->pvt_info;
u64 SystemAddress;
......@@ -2216,7 +2237,7 @@ static void amd64_handle_ce(struct mem_ctl_info *mci,
/* Handle any Un-correctable Errors (UEs) */
static void amd64_handle_ue(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
struct err_regs *info)
{
int csrow;
u64 SystemAddress;
......@@ -2261,59 +2282,24 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
}
}
static void amd64_decode_bus_error(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info)
static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
struct err_regs *info)
{
u32 err_code, ext_ec;
u32 ec_pp; /* error code participating processor (2p) */
u32 ec_to; /* error code timed out (1b) */
u32 ec_rrrr; /* error code memory transaction (4b) */
u32 ec_ii; /* error code memory or I/O (2b) */
u32 ec_ll; /* error code cache level (2b) */
u32 ec = ERROR_CODE(info->nbsl);
u32 xec = EXT_ERROR_CODE(info->nbsl);
int ecc_type = info->nbsh & (0x3 << 13);
ext_ec = EXTRACT_EXT_ERROR_CODE(info->nbsl);
err_code = EXTRACT_ERROR_CODE(info->nbsl);
ec_ll = EXTRACT_LL_CODE(err_code);
ec_ii = EXTRACT_II_CODE(err_code);
ec_rrrr = EXTRACT_RRRR_CODE(err_code);
ec_to = EXTRACT_TO_CODE(err_code);
ec_pp = EXTRACT_PP_CODE(err_code);
amd64_mc_printk(mci, KERN_ERR,
"BUS ERROR:\n"
" time-out(%s) mem or i/o(%s)\n"
" participating processor(%s)\n"
" memory transaction type(%s)\n"
" cache level(%s) Error Found by: %s\n",
to_msgs[ec_to],
ii_msgs[ec_ii],
pp_msgs[ec_pp],
rrrr_msgs[ec_rrrr],
ll_msgs[ec_ll],
(info->nbsh & K8_NBSH_ERR_SCRUBER) ?
"Scrubber" : "Normal Operation");
/* If this was an 'observed' error, early out */
if (ec_pp == K8_NBSL_PP_OBS)
return; /* We aren't the node involved */
/* Parse out the extended error code for ECC events */
switch (ext_ec) {
/* F10 changed to one Extended ECC error code */
case F10_NBSL_EXT_ERR_RES: /* Reserved field */
case F10_NBSL_EXT_ERR_ECC: /* F10 ECC ext err code */
break;
/* Bail early out if this was an 'observed' error */
if (PP(ec) == K8_NBSL_PP_OBS)
return;
default:
amd64_mc_printk(mci, KERN_ERR, "NOT ECC: no special error "
"handling for this error\n");
/* Do only ECC errors */
if (xec && xec != F10_NBSL_EXT_ERR_ECC)
return;
}
if (info->nbsh & K8_NBSH_CECC)
if (ecc_type == 2)
amd64_handle_ce(mci, info);
else if (info->nbsh & K8_NBSH_UECC)
else if (ecc_type == 1)
amd64_handle_ue(mci, info);
/*
......@@ -2324,139 +2310,26 @@ static void amd64_decode_bus_error(struct mem_ctl_info *mci,
* catastrophic.
*/
if (info->nbsh & K8_NBSH_OVERFLOW)
edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR
"Error Overflow set");
edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR "Error Overflow");
}
int amd64_process_error_info(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info,
int handle_errors)
void amd64_decode_bus_error(int node_id, struct err_regs *regs)
{
struct amd64_pvt *pvt;
struct amd64_error_info_regs *regs;
u32 err_code, ext_ec;
int gart_tlb_error = 0;
pvt = mci->pvt_info;
/* If caller doesn't want us to process the error, return */
if (!handle_errors)
return 1;
regs = info;
debugf1("NorthBridge ERROR: mci(0x%p)\n", mci);
debugf1(" MC node(%d) Error-Address(0x%.8x-%.8x)\n",
pvt->mc_node_id, regs->nbeah, regs->nbeal);
debugf1(" nbsh(0x%.8x) nbsl(0x%.8x)\n",
regs->nbsh, regs->nbsl);
debugf1(" Valid Error=%s Overflow=%s\n",
(regs->nbsh & K8_NBSH_VALID_BIT) ? "True" : "False",
(regs->nbsh & K8_NBSH_OVERFLOW) ? "True" : "False");
debugf1(" Err Uncorrected=%s MCA Error Reporting=%s\n",
(regs->nbsh & K8_NBSH_UNCORRECTED_ERR) ?
"True" : "False",
(regs->nbsh & K8_NBSH_ERR_ENABLE) ?
"True" : "False");
debugf1(" MiscErr Valid=%s ErrAddr Valid=%s PCC=%s\n",
(regs->nbsh & K8_NBSH_MISC_ERR_VALID) ?
"True" : "False",
(regs->nbsh & K8_NBSH_VALID_ERROR_ADDR) ?
"True" : "False",
(regs->nbsh & K8_NBSH_PCC) ?
"True" : "False");
debugf1(" CECC=%s UECC=%s Found by Scruber=%s\n",
(regs->nbsh & K8_NBSH_CECC) ?
"True" : "False",
(regs->nbsh & K8_NBSH_UECC) ?
"True" : "False",
(regs->nbsh & K8_NBSH_ERR_SCRUBER) ?
"True" : "False");
debugf1(" CORE0=%s CORE1=%s CORE2=%s CORE3=%s\n",
(regs->nbsh & K8_NBSH_CORE0) ? "True" : "False",
(regs->nbsh & K8_NBSH_CORE1) ? "True" : "False",
(regs->nbsh & K8_NBSH_CORE2) ? "True" : "False",
(regs->nbsh & K8_NBSH_CORE3) ? "True" : "False");
err_code = EXTRACT_ERROR_CODE(regs->nbsl);
/* Determine which error type:
* 1) GART errors - non-fatal, developmental events
* 2) MEMORY errors
* 3) BUS errors
* 4) Unknown error
*/
if (TEST_TLB_ERROR(err_code)) {
/*
* GART errors are intended to help graphics driver developers
* to detect bad GART PTEs. It is recommended by AMD to disable
* GART table walk error reporting by default[1] (currently
* being disabled in mce_cpu_quirks()) and according to the
* comment in mce_cpu_quirks(), such GART errors can be
* incorrectly triggered. We may see these errors anyway and
* unless requested by the user, they won't be reported.
*
* [1] section 13.10.1 on BIOS and Kernel Developers Guide for
* AMD NPT family 0Fh processors
*/
if (report_gart_errors == 0)
return 1;
/*
* Only if GART error reporting is requested should we generate
* any logs.
*/
gart_tlb_error = 1;
debugf1("GART TLB error\n");
amd64_decode_gart_tlb_error(mci, info);
} else if (TEST_MEM_ERROR(err_code)) {
debugf1("Memory/Cache error\n");
amd64_decode_mem_cache_error(mci, info);
} else if (TEST_BUS_ERROR(err_code)) {
debugf1("Bus (Link/DRAM) error\n");
amd64_decode_bus_error(mci, info);
} else {
/* shouldn't reach here! */
amd64_mc_printk(mci, KERN_WARNING,
"%s(): unknown MCE error 0x%x\n", __func__,
err_code);
}
ext_ec = EXTRACT_EXT_ERROR_CODE(regs->nbsl);
amd64_mc_printk(mci, KERN_ERR,
"ExtErr=(0x%x) %s\n", ext_ec, ext_msgs[ext_ec]);
struct mem_ctl_info *mci = mci_lookup[node_id];
if (((ext_ec >= F10_NBSL_EXT_ERR_CRC &&
ext_ec <= F10_NBSL_EXT_ERR_TGT) ||
(ext_ec == F10_NBSL_EXT_ERR_RMW)) &&
EXTRACT_LDT_LINK(info->nbsh)) {
amd64_mc_printk(mci, KERN_ERR,
"Error on hypertransport link: %s\n",
htlink_msgs[
EXTRACT_LDT_LINK(info->nbsh)]);
}
__amd64_decode_bus_error(mci, regs);
/*
* Check the UE bit of the NB status high register, if set generate some
* logs. If NOT a GART error, then process the event as a NO-INFO event.
* If it was a GART error, skip that process.
*
* FIXME: this should go somewhere else, if at all.
*/
if (regs->nbsh & K8_NBSH_UNCORRECTED_ERR) {
amd64_mc_printk(mci, KERN_CRIT, "uncorrected error\n");
if (!gart_tlb_error)
edac_mc_handle_ue_no_info(mci, "UE bit is set\n");
}
if (regs->nbsh & K8_NBSH_PCC)
amd64_mc_printk(mci, KERN_CRIT,
"PCC (processor context corrupt) set\n");
if (regs->nbsh & K8_NBSH_UC_ERR && !report_gart_errors)
edac_mc_handle_ue_no_info(mci, "UE bit is set");
return 1;
}
EXPORT_SYMBOL_GPL(amd64_process_error_info);
/*
* The main polling 'check' function, called FROM the edac core to perform the
......@@ -2464,10 +2337,12 @@ EXPORT_SYMBOL_GPL(amd64_process_error_info);
*/
static void amd64_check(struct mem_ctl_info *mci)
{
struct amd64_error_info_regs info;
struct err_regs regs;
if (amd64_get_error_info(mci, &info))
amd64_process_error_info(mci, &info, 1);
if (amd64_get_error_info(mci, &regs)) {
struct amd64_pvt *pvt = mci->pvt_info;
amd_decode_nb_mce(pvt->mc_node_id, &regs, 1);
}
}
/*
......@@ -3163,6 +3038,13 @@ static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
mci_lookup[node_id] = mci;
pvt_lookup[node_id] = NULL;
/* register stuff with EDAC MCE */
if (report_gart_errors)
amd_report_gart_errors(true);
amd_register_ecc_decoder(amd64_decode_bus_error);
return 0;
err_add_mc:
......@@ -3229,6 +3111,10 @@ static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
mci_lookup[pvt->mc_node_id] = NULL;
/* unregister from EDAC MCE */
amd_report_gart_errors(false);
amd_unregister_ecc_decoder(amd64_decode_bus_error);
/* Free the EDAC CORE resources */
edac_mc_free(mci);
}
......
drivers/edac/amd64_edac.h
View file @ f65ac45e
......@@ -72,6 +72,7 @@
#include <linux/edac.h>
#include <asm/msr.h>
#include "edac_core.h"
#include "edac_mce_amd.h"
#define amd64_printk(level, fmt, arg...) \
edac_printk(level, "amd64", fmt, ##arg)
......@@ -303,21 +304,9 @@ enum {
#define K8_NBSL 0x48
#define EXTRACT_HIGH_SYNDROME(x) (((x) >> 24) & 0xff)
#define EXTRACT_EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f)
/* Family F10h: Normalized Extended Error Codes */
#define F10_NBSL_EXT_ERR_RES 0x0
#define F10_NBSL_EXT_ERR_CRC 0x1
#define F10_NBSL_EXT_ERR_SYNC 0x2
#define F10_NBSL_EXT_ERR_MST 0x3
#define F10_NBSL_EXT_ERR_TGT 0x4
#define F10_NBSL_EXT_ERR_GART 0x5
#define F10_NBSL_EXT_ERR_RMW 0x6
#define F10_NBSL_EXT_ERR_WDT 0x7
#define F10_NBSL_EXT_ERR_ECC 0x8
#define F10_NBSL_EXT_ERR_DEV 0x9
#define F10_NBSL_EXT_ERR_LINK_DATA 0xA
/* Next two are overloaded values */
#define F10_NBSL_EXT_ERR_LINK_PROTO 0xB
......@@ -348,17 +337,6 @@ enum {
#define K8_NBSL_EXT_ERR_CHIPKILL_ECC 0x8
#define K8_NBSL_EXT_ERR_DRAM_PARITY 0xD
#define EXTRACT_ERROR_CODE(x) ((x) & 0xffff)
#define TEST_TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
#define TEST_MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
#define TEST_BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
#define EXTRACT_TT_CODE(x) (((x) >> 2) & 0x3)
#define EXTRACT_II_CODE(x) (((x) >> 2) & 0x3)
#define EXTRACT_LL_CODE(x) (((x) >> 0) & 0x3)
#define EXTRACT_RRRR_CODE(x) (((x) >> 4) & 0xf)
#define EXTRACT_TO_CODE(x) (((x) >> 8) & 0x1)
#define EXTRACT_PP_CODE(x) (((x) >> 9) & 0x3)
/*
* The following are for BUS type errors AFTER values have been normalized by
* shifting right
......@@ -368,28 +346,7 @@ enum {
#define K8_NBSL_PP_OBS 0x2
#define K8_NBSL_PP_GENERIC 0x3
#define K8_NBSH 0x4C
#define K8_NBSH_VALID_BIT BIT(31)
#define K8_NBSH_OVERFLOW BIT(30)
#define K8_NBSH_UNCORRECTED_ERR BIT(29)
#define K8_NBSH_ERR_ENABLE BIT(28)
#define K8_NBSH_MISC_ERR_VALID BIT(27)
#define K8_NBSH_VALID_ERROR_ADDR BIT(26)
#define K8_NBSH_PCC BIT(25)
#define K8_NBSH_CECC BIT(14)
#define K8_NBSH_UECC BIT(13)
#define K8_NBSH_ERR_SCRUBER BIT(8)
#define K8_NBSH_CORE3 BIT(3)
#define K8_NBSH_CORE2 BIT(2)
#define K8_NBSH_CORE1 BIT(1)
#define K8_NBSH_CORE0 BIT(0)
#define EXTRACT_LDT_LINK(x) (((x) >> 4) & 0x7)
#define EXTRACT_ERR_CPU_MAP(x) ((x) & 0xF)
#define EXTRACT_LOW_SYNDROME(x) (((x) >> 15) & 0xff)
#define K8_NBEAL 0x50
#define K8_NBEAH 0x54
......@@ -455,23 +412,6 @@ enum amd64_chipset_families {
F11_CPUS,
};
/*
* Structure to hold:
*
* 1) dynamically read status and error address HW registers
* 2) sysfs entered values
* 3) MCE values
*
* Depends on entry into the modules
*/
struct amd64_error_info_regs {
u32 nbcfg;
u32 nbsh;
u32 nbsl;
u32 nbeah;
u32 nbeal;
};
/* Error injection control structure */
struct error_injection {
u32 section;
......@@ -542,7 +482,7 @@ struct amd64_pvt {
u32 online_spare; /* On-Line spare Reg */
/* temp storage for when input is received from sysfs */
struct amd64_error_info_regs ctl_error_info;
struct err_regs ctl_error_info;
/* place to store error injection parameters prior to issue */
struct error_injection injection;
......@@ -601,11 +541,11 @@ struct low_ops {
int (*early_channel_count)(struct amd64_pvt *pvt);
u64 (*get_error_address)(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info);
struct err_regs *info);
void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info,
struct err_regs *info,
u64 SystemAddr);
int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
};
......@@ -637,8 +577,5 @@ static inline struct low_ops *family_ops(int index)
#define F10_MIN_SCRUB_RATE_BITS 0x5
#define F11_MIN_SCRUB_RATE_BITS 0x6
int amd64_process_error_info(struct mem_ctl_info *mci,
struct amd64_error_info_regs *info,
int handle_errors);
int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
u64 *hole_offset, u64 *hole_size);
drivers/edac/amd64_edac_dbg.c
View file @ f65ac45e
......@@ -24,7 +24,7 @@ static ssize_t amd64_nbea_store(struct mem_ctl_info *mci, const char *data,
/* Process the Mapping request */
/* TODO: Add race prevention */
amd64_process_error_info(mci, &pvt->ctl_error_info, 1);
amd_decode_nb_mce(pvt->mc_node_id, &pvt->ctl_error_info, 1);
return count;
}
......
drivers/edac/amd64_edac_err_types.c deleted 100644 → 0
View file @ 4142e0d1
#include "amd64_edac.h"
/*
* See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
* for DDR2 DRAM mapping.
*/
u32 revf_quad_ddr2_shift[] = {
0, /* 0000b NULL DIMM (128mb) */
28, /* 0001b 256mb */
29, /* 0010b 512mb */
29, /* 0011b 512mb */
29, /* 0100b 512mb */
30, /* 0101b 1gb */
30, /* 0110b 1gb */
31, /* 0111b 2gb */
31, /* 1000b 2gb */
32, /* 1001b 4gb */
32, /* 1010b 4gb */
33, /* 1011b 8gb */
0, /* 1100b future */
0, /* 1101b future */
0, /* 1110b future */
0 /* 1111b future */
};
/*
* Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
* bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
* or higher value'.
*
*FIXME: Produce a better mapping/linearisation.
*/
struct scrubrate scrubrates[] = {
{ 0x01, 1600000000UL},
{ 0x02, 800000000UL},
{ 0x03, 400000000UL},
{ 0x04, 200000000UL},
{ 0x05, 100000000UL},
{ 0x06, 50000000UL},
{ 0x07, 25000000UL},
{ 0x08, 12284069UL},
{ 0x09, 6274509UL},
{ 0x0A, 3121951UL},
{ 0x0B, 1560975UL},
{ 0x0C, 781440UL},
{ 0x0D, 390720UL},
{ 0x0E, 195300UL},
{ 0x0F, 97650UL},
{ 0x10, 48854UL},
{ 0x11, 24427UL},
{ 0x12, 12213UL},
{ 0x13, 6101UL},
{ 0x14, 3051UL},
{ 0x15, 1523UL},
{ 0x16, 761UL},
{ 0x00, 0UL}, /* scrubbing off */
};
/*
* string representation for the different MCA reported error types, see F3x48
* or MSR0000_0411.
*/
const char *tt_msgs[] = { /* transaction type */
"instruction",
"data",
"generic",
"reserved"
};
const char *ll_msgs[] = { /* cache level */
"L0",
"L1",
"L2",
"L3/generic"
};
const char *rrrr_msgs[] = {
"generic",
"generic read",
"generic write",
"data read",
"data write",
"inst fetch",
"prefetch",
"evict",
"snoop",
"reserved RRRR= 9",
"reserved RRRR= 10",
"reserved RRRR= 11",
"reserved RRRR= 12",
"reserved RRRR= 13",
"reserved RRRR= 14",
"reserved RRRR= 15"
};
const char *pp_msgs[] = { /* participating processor */
"local node originated (SRC)",
"local node responded to request (RES)",
"local node observed as 3rd party (OBS)",
"generic"
};
const char *to_msgs[] = {
"no timeout",
"timed out"
};
const char *ii_msgs[] = { /* memory or i/o */
"mem access",
"reserved",
"i/o access",
"generic"
};
/* Map the 5 bits of Extended Error code to the string table. */
const char *ext_msgs[] = { /* extended error */
"K8 ECC error/F10 reserved", /* 0_0000b */
"CRC error", /* 0_0001b */
"sync error", /* 0_0010b */
"mst abort", /* 0_0011b */
"tgt abort", /* 0_0100b */
"GART error", /* 0_0101b */
"RMW error", /* 0_0110b */
"Wdog timer error", /* 0_0111b */
"F10-ECC/K8-Chipkill error", /* 0_1000b */
"DEV Error", /* 0_1001b */
"Link Data error", /* 0_1010b */
"Link or L3 Protocol error", /* 0_1011b */
"NB Array error", /* 0_1100b */
"DRAM Parity error", /* 0_1101b */
"Link Retry/GART Table Walk/DEV Table Walk error", /* 0_1110b */
"Res 0x0ff error", /* 0_1111b */
"Res 0x100 error", /* 1_0000b */
"Res 0x101 error", /* 1_0001b */
"Res 0x102 error", /* 1_0010b */
"Res 0x103 error", /* 1_0011b */
"Res 0x104 error", /* 1_0100b */
"Res 0x105 error", /* 1_0101b */
"Res 0x106 error", /* 1_0110b */
"Res 0x107 error", /* 1_0111b */
"Res 0x108 error", /* 1_1000b */
"Res 0x109 error", /* 1_1001b */
"Res 0x10A error", /* 1_1010b */
"Res 0x10B error", /* 1_1011b */
"L3 Cache Data error", /* 1_1100b */
"L3 CacheTag error", /* 1_1101b */
"L3 Cache LRU error", /* 1_1110b */
"Res 0x1FF error" /* 1_1111b */
};
const char *htlink_msgs[] = {
"none",
"1",
"2",
"1 2",
"3",
"1 3",
"2 3",
"1 2 3"
};
drivers/edac/edac_mce_amd.c 0 → 100644
View file @ f65ac45e
#include <linux/module.h>
#include "edac_mce_amd.h"
static bool report_gart_errors;
static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
void amd_report_gart_errors(bool v)
{
report_gart_errors = v;
}
EXPORT_SYMBOL_GPL(amd_report_gart_errors);
void amd_register_ecc_decoder(void (*f)(int, struct err_regs *))
{
nb_bus_decoder = f;
}
EXPORT_SYMBOL_GPL(amd_register_ecc_decoder);
void amd_unregister_ecc_decoder(void (*f)(int, struct err_regs *))
{
if (nb_bus_decoder) {
WARN_ON(nb_bus_decoder != f);
nb_bus_decoder = NULL;
}
}
EXPORT_SYMBOL_GPL(amd_unregister_ecc_decoder);
/*
* string representation for the different MCA reported error types, see F3x48
* or MSR0000_0411.
*/
const char *tt_msgs[] = { /* transaction type */
"instruction",
"data",
"generic",
"reserved"
};
EXPORT_SYMBOL_GPL(tt_msgs);
const char *ll_msgs[] = { /* cache level */
"L0",
"L1",
"L2",
"L3/generic"
};
EXPORT_SYMBOL_GPL(ll_msgs);
const char *rrrr_msgs[] = {
"generic",
"generic read",
"generic write",
"data read",
"data write",
"inst fetch",
"prefetch",
"evict",
"snoop",
"reserved RRRR= 9",
"reserved RRRR= 10",
"reserved RRRR= 11",
"reserved RRRR= 12",
"reserved RRRR= 13",
"reserved RRRR= 14",
"reserved RRRR= 15"
};
EXPORT_SYMBOL_GPL(rrrr_msgs);
const char *pp_msgs[] = { /* participating processor */
"local node originated (SRC)",
"local node responded to request (RES)",
"local node observed as 3rd party (OBS)",
"generic"
};
EXPORT_SYMBOL_GPL(pp_msgs);
const char *to_msgs[] = {
"no timeout",
"timed out"
};
EXPORT_SYMBOL_GPL(to_msgs);
const char *ii_msgs[] = { /* memory or i/o */
"mem access",
"reserved",
"i/o access",
"generic"
};
EXPORT_SYMBOL_GPL(ii_msgs);
/*
* Map the 4 or 5 (family-specific) bits of Extended Error code to the
* string table.
*/
const char *ext_msgs[] = {
"K8 ECC error", /* 0_0000b */
"CRC error on link", /* 0_0001b */
"Sync error packets on link", /* 0_0010b */
"Master Abort during link operation", /* 0_0011b */
"Target Abort during link operation", /* 0_0100b */
"Invalid GART PTE entry during table walk", /* 0_0101b */
"Unsupported atomic RMW command received", /* 0_0110b */
"WDT error: NB transaction timeout", /* 0_0111b */
"ECC/ChipKill ECC error", /* 0_1000b */
"SVM DEV Error", /* 0_1001b */
"Link Data error", /* 0_1010b */
"Link/L3/Probe Filter Protocol error", /* 0_1011b */
"NB Internal Arrays Parity error", /* 0_1100b */
"DRAM Address/Control Parity error", /* 0_1101b */
"Link Transmission error", /* 0_1110b */
"GART/DEV Table Walk Data error" /* 0_1111b */
"Res 0x100 error", /* 1_0000b */
"Res 0x101 error", /* 1_0001b */
"Res 0x102 error", /* 1_0010b */
"Res 0x103 error", /* 1_0011b */
"Res 0x104 error", /* 1_0100b */
"Res 0x105 error", /* 1_0101b */
"Res 0x106 error", /* 1_0110b */
"Res 0x107 error", /* 1_0111b */
"Res 0x108 error", /* 1_1000b */
"Res 0x109 error", /* 1_1001b */
"Res 0x10A error", /* 1_1010b */
"Res 0x10B error", /* 1_1011b */
"ECC error in L3 Cache Data", /* 1_1100b */
"L3 Cache Tag error", /* 1_1101b */
"L3 Cache LRU Parity error", /* 1_1110b */
"Probe Filter error" /* 1_1111b */
};
EXPORT_SYMBOL_GPL(ext_msgs);
static void amd_decode_dc_mce(u64 mc0_status)
{
u32 ec = mc0_status & 0xffff;
u32 xec = (mc0_status >> 16) & 0xf;
pr_emerg(" Data Cache Error");
if (xec == 1 && TLB_ERROR(ec))
pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
else if (xec == 0) {
if (mc0_status & (1ULL << 40))
pr_cont(" during Data Scrub.\n");
else if (TLB_ERROR(ec))
pr_cont(": %s TLB parity error.\n", LL_MSG(ec));
else if (MEM_ERROR(ec)) {
u8 ll = ec & 0x3;
u8 tt = (ec >> 2) & 0x3;
u8 rrrr = (ec >> 4) & 0xf;
/* see F10h BKDG (31116), Table 92. */
if (ll == 0x1) {
if (tt != 0x1)
goto wrong_dc_mce;
pr_cont(": Data/Tag %s error.\n", RRRR_MSG(ec));
} else if (ll == 0x2 && rrrr == 0x3)
pr_cont(" during L1 linefill from L2.\n");
else
goto wrong_dc_mce;
} else if (BUS_ERROR(ec) && boot_cpu_data.x86 == 0xf)
pr_cont(" during system linefill.\n");
else
goto wrong_dc_mce;
} else
goto wrong_dc_mce;
return;
wrong_dc_mce:
pr_warning("Corrupted DC MCE info?\n");
}
static void amd_decode_ic_mce(u64 mc1_status)
{
u32 ec = mc1_status & 0xffff;
u32 xec = (mc1_status >> 16) & 0xf;
pr_emerg(" Instruction Cache Error");
if (xec == 1 && TLB_ERROR(ec))
pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
else if (xec == 0) {
if (TLB_ERROR(ec))
pr_cont(": %s TLB Parity error.\n", LL_MSG(ec));
else if (BUS_ERROR(ec)) {
if (boot_cpu_data.x86 == 0xf &&
(mc1_status & (1ULL << 58)))
pr_cont(" during system linefill.\n");
else
pr_cont(" during attempted NB data read.\n");
} else if (MEM_ERROR(ec)) {
u8 ll = ec & 0x3;
u8 rrrr = (ec >> 4) & 0xf;
if (ll == 0x2)
pr_cont(" during a linefill from L2.\n");
else if (ll == 0x1) {
switch (rrrr) {
case 0x5:
pr_cont(": Parity error during "
"data load.\n");
break;
case 0x7:
pr_cont(": Copyback Parity/Victim"
" error.\n");
break;
case 0x8:
pr_cont(": Tag Snoop error.\n");
break;
default:
goto wrong_ic_mce;
break;
}
}
} else
goto wrong_ic_mce;
} else
goto wrong_ic_mce;
return;
wrong_ic_mce:
pr_warning("Corrupted IC MCE info?\n");
}
static void amd_decode_bu_mce(u64 mc2_status)
{
u32 ec = mc2_status & 0xffff;
u32 xec = (mc2_status >> 16) & 0xf;
pr_emerg(" Bus Unit Error");
if (xec == 0x1)
pr_cont(" in the write data buffers.\n");
else if (xec == 0x3)
pr_cont(" in the victim data buffers.\n");
else if (xec == 0x2 && MEM_ERROR(ec))
pr_cont(": %s error in the L2 cache tags.\n", RRRR_MSG(ec));
else if (xec == 0x0) {
if (TLB_ERROR(ec))
pr_cont(": %s error in a Page Descriptor Cache or "
"Guest TLB.\n", TT_MSG(ec));
else if (BUS_ERROR(ec))
pr_cont(": %s/ECC error in data read from NB: %s.\n",
RRRR_MSG(ec), PP_MSG(ec));
else if (MEM_ERROR(ec)) {
u8 rrrr = (ec >> 4) & 0xf;
if (rrrr >= 0x7)
pr_cont(": %s error during data copyback.\n",
RRRR_MSG(ec));
else if (rrrr <= 0x1)
pr_cont(": %s parity/ECC error during data "
"access from L2.\n", RRRR_MSG(ec));
else
goto wrong_bu_mce;
} else
goto wrong_bu_mce;
} else
goto wrong_bu_mce;
return;
wrong_bu_mce:
pr_warning("Corrupted BU MCE info?\n");
}
static void amd_decode_ls_mce(u64 mc3_status)
{
u32 ec = mc3_status & 0xffff;
u32 xec = (mc3_status >> 16) & 0xf;
pr_emerg(" Load Store Error");
if (xec == 0x0) {
u8 rrrr = (ec >> 4) & 0xf;
if (!BUS_ERROR(ec) || (rrrr != 0x3 && rrrr != 0x4))
goto wrong_ls_mce;
pr_cont(" during %s.\n", RRRR_MSG(ec));
}
return;
wrong_ls_mce:
pr_warning("Corrupted LS MCE info?\n");
}
void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
{
u32 ec = ERROR_CODE(regs->nbsl);
u32 xec = EXT_ERROR_CODE(regs->nbsl);
if (!handle_errors)
return;
pr_emerg(" Northbridge Error, node %d", node_id);
/*
* F10h, revD can disable ErrCpu[3:0] so check that first and also the
* value encoding has changed so interpret those differently
*/
if ((boot_cpu_data.x86 == 0x10) &&
(boot_cpu_data.x86_model > 8)) {
if (regs->nbsh & K8_NBSH_ERR_CPU_VAL)
pr_cont(", core: %u\n", (u8)(regs->nbsh & 0xf));
} else {
pr_cont(", core: %d\n", ilog2((regs->nbsh & 0xf)));
}
pr_emerg("%s.\n", EXT_ERR_MSG(xec));
if (BUS_ERROR(ec) && nb_bus_decoder)
nb_bus_decoder(node_id, regs);
}
EXPORT_SYMBOL_GPL(amd_decode_nb_mce);
static void amd_decode_fr_mce(u64 mc5_status)
{
/* we have only one error signature so match all fields at once. */
if ((mc5_status & 0xffff) == 0x0f0f)
pr_emerg(" FR Error: CPU Watchdog timer expire.\n");
else
pr_warning("Corrupted FR MCE info?\n");
}
static inline void amd_decode_err_code(unsigned int ec)
{
if (TLB_ERROR(ec)) {
/*
* GART errors are intended to help graphics driver developers
* to detect bad GART PTEs. It is recommended by AMD to disable
* GART table walk error reporting by default[1] (currently
* being disabled in mce_cpu_quirks()) and according to the
* comment in mce_cpu_quirks(), such GART errors can be
* incorrectly triggered. We may see these errors anyway and
* unless requested by the user, they won't be reported.
*
* [1] section 13.10.1 on BIOS and Kernel Developers Guide for
* AMD NPT family 0Fh processors
*/
if (!report_gart_errors)
return;
pr_emerg(" Transaction: %s, Cache Level %s\n",
TT_MSG(ec), LL_MSG(ec));
} else if (MEM_ERROR(ec)) {
pr_emerg(" Transaction: %s, Type: %s, Cache Level: %s",
RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec));
} else if (BUS_ERROR(ec)) {
pr_emerg(" Transaction type: %s(%s), %s, Cache Level: %s, "
"Participating Processor: %s\n",
RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec),
PP_MSG(ec));
} else
pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
}
void decode_mce(struct mce *m)
{
struct err_regs regs;
int node, ecc;
pr_emerg("MC%d_STATUS: ", m->bank);
pr_cont("%sorrected error, report: %s, MiscV: %svalid, "
"CPU context corrupt: %s",
((m->status & MCI_STATUS_UC) ? "Unc" : "C"),
((m->status & MCI_STATUS_EN) ? "yes" : "no"),
((m->status & MCI_STATUS_MISCV) ? "" : "in"),
((m->status & MCI_STATUS_PCC) ? "yes" : "no"));
/* do the two bits[14:13] together */
ecc = m->status & (3ULL << 45);
if (ecc)
pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U"));
pr_cont("\n");
switch (m->bank) {
case 0:
amd_decode_dc_mce(m->status);
break;
case 1:
amd_decode_ic_mce(m->status);
break;
case 2:
amd_decode_bu_mce(m->status);
break;
case 3:
amd_decode_ls_mce(m->status);
break;
case 4:
regs.nbsl = (u32) m->status;
regs.nbsh = (u32)(m->status >> 32);
regs.nbeal = (u32) m->addr;
regs.nbeah = (u32)(m->addr >> 32);
node = per_cpu(cpu_llc_id, m->extcpu);
amd_decode_nb_mce(node, &regs, 1);
break;
case 5:
amd_decode_fr_mce(m->status);
break;
default:
break;
}
amd_decode_err_code(m->status & 0xffff);
}
drivers/edac/edac_mce_amd.h 0 → 100644
View file @ f65ac45e
#ifndef _EDAC_MCE_AMD_H
#define _EDAC_MCE_AMD_H
#include <asm/mce.h>
#define ERROR_CODE(x) ((x) & 0xffff)
#define EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f)
#define EXT_ERR_MSG(x) ext_msgs[EXT_ERROR_CODE(x)]
#define LOW_SYNDROME(x) (((x) >> 15) & 0xff)
#define HIGH_SYNDROME(x) (((x) >> 24) & 0xff)
#define TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
#define MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
#define BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
#define TT(x) (((x) >> 2) & 0x3)
#define TT_MSG(x) tt_msgs[TT(x)]
#define II(x) (((x) >> 2) & 0x3)
#define II_MSG(x) ii_msgs[II(x)]
#define LL(x) (((x) >> 0) & 0x3)
#define LL_MSG(x) ll_msgs[LL(x)]
#define RRRR(x) (((x) >> 4) & 0xf)
#define RRRR_MSG(x) rrrr_msgs[RRRR(x)]
#define TO(x) (((x) >> 8) & 0x1)
#define TO_MSG(x) to_msgs[TO(x)]
#define PP(x) (((x) >> 9) & 0x3)
#define PP_MSG(x) pp_msgs[PP(x)]
#define K8_NBSH 0x4C
#define K8_NBSH_VALID_BIT BIT(31)
#define K8_NBSH_OVERFLOW BIT(30)
#define K8_NBSH_UC_ERR BIT(29)
#define K8_NBSH_ERR_EN BIT(28)
#define K8_NBSH_MISCV BIT(27)
#define K8_NBSH_VALID_ERROR_ADDR BIT(26)
#define K8_NBSH_PCC BIT(25)
#define K8_NBSH_ERR_CPU_VAL BIT(24)
#define K8_NBSH_CECC BIT(14)
#define K8_NBSH_UECC BIT(13)
#define K8_NBSH_ERR_SCRUBER BIT(8)
extern const char *tt_msgs[];
extern const char *ll_msgs[];
extern const char *rrrr_msgs[];
extern const char *pp_msgs[];
extern const char *to_msgs[];
extern const char *ii_msgs[];
extern const char *ext_msgs[];
/*
* relevant NB regs
*/
struct err_regs {
u32 nbcfg;
u32 nbsh;
u32 nbsl;
u32 nbeah;
u32 nbeal;
};
void amd_report_gart_errors(bool);
void amd_register_ecc_decoder(void (*f)(int, struct err_regs *));
void amd_unregister_ecc_decoder(void (*f)(int, struct err_regs *));
void amd_decode_nb_mce(int, struct err_regs *, int);
#endif /* _EDAC_MCE_AMD_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7