Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC i.MX DT changes from Olof Johansson:
 "This branch contains of devicetree changes for the Freescale i.MX
  platform.

  The base patch of the branch changes the format of the dts files to a
  slightly different format that makes it easier to do derivative board
  definitions, but it also introduces a lot of churn in the process
  since every line of the file is touched.

  On top of that are a handful of the regular changes; enabling more
  boards as DT-based instead of legacy board files (mx25pdk), enabling
  another driver for devicetree and thus adding bindings (onewire), etc.

  I'm not happy about the churn, and will likely not take it for other
  platforms in the future."

* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: dts: add dtsi for imx6q and imx6dl
  ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
  ARM: dts: i.MX6: Add regulator delay support
  ARM: dts: Add device tree entry for onewire master on i.MX53
  ARM: i.MX53: Add clocks for i.mx53 onewire master.
  W1: Add device tree support to MXC onewire master.
  ARM: imx: enable imx6q-cpufreq support
  ARM: dts: Add apf51 basic support
  ARM i.MX6: change mxs usbphy clock usage
  ARM: dts: imx6q: Remove silicon version from SDMA firmware
  ARM i.MX53: dts: add oftree for MBa53 baseboard
  ARM i.MX53: add dts for the TQ tqma53 module
  ARM: dts: imx53: pinctrl update
  ARM i.MX51 babbage: Add keypad support
  ARM: dts: imx: Add imx51 KPP entry
  ARM: dts: imx25-karo-tx25: Put status entry in the end
  ARM: mx25pdk: Add device tree support
  ARM: dts: imx: use nodes label in board dts
  ARM: dts: add missing imx dtb targets
  ARM: boot: dts: Add an entry for imx27-pdk.dtb
  ...

Documentation/devicetree/bindings/arm/armadeus.txt

+Armadeus i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+APF51: i.MX51 based module.
+Required root node properties:
+    - compatible = "armadeus,imx51-apf51", "fsl,imx51";

Documentation/devicetree/bindings/arm/fsl.txt

@@ -5,6 +5,14 @@ i.MX23 Evaluation Kit
 Required root node properties:
     - compatible = "fsl,imx23-evk", "fsl,imx23";
 
+i.MX25 Product Development Kit
+Required root node properties:
+    - compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+i.MX27 Product Development Kit
+Required root node properties:
+    - compatible = "fsl,imx27-pdk", "fsl,imx27";
+
 i.MX28 Evaluation Kit
 Required root node properties:
     - compatible = "fsl,imx28-evk", "fsl,imx28";

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -171,6 +171,7 @@ clocks and IDs.
 	can_sel			156
 	can1_serial_gate	157
 	can1_ipg_gate		158
+	owire_gate		159
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -203,6 +203,8 @@ clocks and IDs.
 	pcie_ref		188
 	pcie_ref_125m		189
 	enet_ref		190
+	usbphy1_gate		191
+	usbphy2_gate		192
 
 Examples:
 

Documentation/devicetree/bindings/w1/fsl-imx-owire.txt

+* Freescale i.MX One wire bus master controller
+
+Required properties:
+- compatible : should be "fsl,imx21-owire"
+- reg : Address and length of the register set for the device
+
+Optional properties:
+- clocks : phandle of clock that supplies the module (required if platform
+		clock bindings use device tree)
+
+Example:
+
+- From imx53.dtsi:
+owire: owire@63fa4000 {
+	compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+	reg = <0x63fa4000 0x4000>;
+	clocks = <&clks 159>;
+	status = "disabled";
+};

arch/arm/boot/dts/Makefile

@@ -80,9 +80,17 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-xp-db.dtb \
 	armada-xp-openblocks-ax3-4.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+dtb-$(CONFIG_ARCH_MXC) += \
+	imx25-karo-tx25.dtb \
+	imx25-pdk.dtb \
+	imx27-apf27.dtb \
+	imx27-pdk.dtb \
+	imx31-bug.dtb \
+	imx51-apf51.dtb \
+	imx51-babbage.dtb \
 	imx53-ard.dtb \
 	imx53-evk.dtb \
+	imx53-mba53.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
 	imx6q-arm2.dtb \

arch/arm/boot/dts/imx25-karo-tx25.dts

@@ -19,26 +19,18 @@ / {
 	memory {
 		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
 	};
+};
 
-	soc {
-		aips@43f00000 {
-			uart1: serial@43f90000 {
+&uart1 {
 	status = "okay";
-			};
-		};
+};
 
-		spba@50000000 {
-			fec: ethernet@50038000 {
-				status = "okay";
+&fec {
 	phy-mode = "rmii";
-			};
-		};
+	status = "okay";
+};
 
-		emi@80000000 {
-			nand@bb000000 {
+&nfc {
 	nand-on-flash-bbt;
 	status = "okay";
-			};
-		};
-	};
 };

arch/arm/boot/dts/imx25-pdk.dts

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+	model = "Freescale i.MX25 Product Development Kit";
+	compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&fec {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&nfc {
+	nand-on-flash-bbt;
+	status = "okay";
+};

arch/arm/boot/dts/imx25.dtsi

@@ -499,7 +499,7 @@ emi@80000000 {
 			reg = <0x80000000 0x3b002000>;
 			ranges;
 
-			nand@bb000000 {
+			nfc: nand@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 

arch/arm/boot/dts/imx27-apf27.dts

@@ -32,19 +32,17 @@ osc26m {
 			clock-frequency = <0>;
 		};
 	};
+};
 
-	soc {
-		aipi@10000000 {
-			serial@1000a000 {
+&uart1 {
 	status = "okay";
-			};
+};
 
-			ethernet@1002b000 {
+&fec {
 	status = "okay";
-			};
-		};
+};
 
-		nand@d8000000 {
+&nfc {
 	status = "okay";
 	nand-bus-width = <16>;
 	nand-ecc-mode = "hw";
@@ -84,6 +82,4 @@ partition@800000 {
 		label = "rootfs";
 		reg = <0x800000 0xf800000>;
 	};
-		};
-	};
 };

arch/arm/boot/dts/imx27-3ds.dts → arch/arm/boot/dts/imx27-pdk.dts

@@ -13,25 +13,19 @@
 /include/ "imx27.dtsi"
 
 / {
-	model = "mx27_3ds";
-	compatible = "freescale,imx27-3ds", "fsl,imx27";
+	model = "Freescale i.MX27 Product Development Kit";
+	compatible = "fsl,imx27-pdk", "fsl,imx27";
 
 	memory {
 		reg = <0x0 0x0>;
 	};
+};
 
-	soc {
-		aipi@10000000 { /* aipi1 */
-			uart1: serial@1000a000 {
+&uart1 {
 	fsl,uart-has-rtscts;
 	status = "okay";
-			};
-		};
+};
 
-		aipi@10020000 { /* aipi2 */
-			ethernet@1002b000 {
+&fec {
 	status = "okay";
-			};
-		};
-	};
 };

arch/arm/boot/dts/imx31-bug.dts

@@ -19,13 +19,9 @@ / {
 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */
 	};
+};
 
-	soc {
-		aips@43f00000 { /* AIPS1 */
-			uart5: serial@43fb4000 {
+&uart5 {
 	fsl,uart-has-rtscts;
 	status = "okay";
-			};
-		};
-	};
 };

arch/arm/boot/dts/imx51-apf51.dts

+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_2>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 0>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	status = "okay";
+};

arch/arm/boot/dts/imx51-babbage.dts

@@ -21,7 +21,6 @@ memory {
 		reg = <0x90000000 0x20000000>;
 	};
 
-	soc {
 	display@di0 {
 		compatible = "fsl,imx-parallel-display";
 		crtcs = <&ipu 0>;
@@ -38,32 +37,56 @@ display@di1 {
 		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
 	};
 
-		aips@70000000 { /* aips-1 */
-			spba@70000000 {
-				esdhc@70004000 { /* ESDHC1 */
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 21 0>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+};
+
+&esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
 	fsl,cd-controller;
 	fsl,wp-controller;
 	status = "okay";
-				};
+};
 
-				esdhc@70008000 { /* ESDHC2 */
+&esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2_1>;
 	cd-gpios = <&gpio1 6 0>;
 	wp-gpios = <&gpio1 5 0>;
 	status = "okay";
-				};
+};
 
-				uart3: serial@7000c000 {
+&uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
-				};
+};
 
-				ecspi@70010000 { /* ECSPI1 */
+&ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1_1>;
 	fsl,spi-num-chipselects = <2>;
@@ -185,15 +208,14 @@ partition@40000 {
 			reg = <0x40000 0x3c0000>;
 		};
 	};
-				};
+};
 
-				ssi2: ssi@70014000 {
+&ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
-				};
-			};
+};
 
-			iomuxc@73fa8000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -210,24 +232,22 @@ pinctrl_hog: hoggrp {
 			>;
 		};
 	};
-			};
+};
 
-			uart1: serial@73fbc000 {
+&uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
-			};
+};
 
-			uart2: serial@73fc0000 {
+&uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_1>;
 	status = "okay";
-			};
-		};
+};
 
-		aips@80000000 {	/* aips-2 */
-			i2c@83fc4000 { /* I2C2 */
+&i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2_1>;
 	status = "okay";
@@ -239,45 +259,39 @@ sgtl5000: codec@0a {
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;
 	};
-			};
+};
 
-			audmux@83fd0000 {
+&audmux {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux_1>;
 	status = "okay";
-			};
+};
 
-			ethernet@83fec000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec_1>;
 	phy-mode = "mii";
 	status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 21 0>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-	};
+};
 
-	sound {
-		compatible = "fsl,imx51-babbage-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx51-babbage-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <0x00000067	/* KEY_UP */
+			0x0001006c	/* KEY_DOWN */
+			0x00020072	/* KEY_VOLUMEDOWN */
+			0x00030066	/* KEY_HOME */
+			0x0100006a	/* KEY_RIGHT */
+			0x01010069	/* KEY_LEFT */
+			0x0102001c	/* KEY_ENTER */
+			0x01030073	/* KEY_VOLUMEUP */
+			0x02000040	/* KEY_F6 */
+			0x02010042	/* KEY_F8 */
+			0x02020043	/* KEY_F9 */
+			0x02030044	/* KEY_F10 */
+			0x0300003b	/* KEY_F1 */
+			0x0301003c	/* KEY_F2 */
+			0x0302003d	/* KEY_F3 */
+			0x03030074>;	/* KEY_POWER */
+	status = "okay";
 };

arch/arm/boot/dts/imx51.dtsi

@@ -221,6 +221,14 @@ gpio4: gpio@73f90000 {
 				#interrupt-cells = <2>;
 			};
 
+			kpp: kpp@73f94000 {
+				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+				reg = <0x73f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks 0>;
+				status = "disabled";
+			};
+
 			wdog1: wdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
@@ -273,6 +281,29 @@ pinctrl_fec_1: fecgrp-1 {
 							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
 						>;
 					};
+
+					pinctrl_fec_2: fecgrp-2 {
+						fsl,pins = <
+							589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */
+							592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */
+							594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */
+							596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */
+							598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */
+							602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */
+							604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */
+							609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */
+							618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */
+							623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */
+							628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */
+							634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */
+							639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */
+							644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */
+							649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */
+							653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */
+							657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */
+							662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */
+						>;
+					};
 				};
 
 				ecspi1 {
@@ -409,6 +440,28 @@ pinctrl_uart3_1: uart3grp-1 {
 							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
 						>;
 					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							434 0x1c5	/* MX51_PAD_UART3_RXD__UART3_RXD */
+							430 0x1c5	/* MX51_PAD_UART3_TXD__UART3_TXD */
+						>;
+					};
+				};
+
+				kpp {
+					pinctrl_kpp_1: kppgrp-1 {
+						fsl,pins = <
+							438 0xe0	/* MX51_PAD_KEY_ROW0__KEY_ROW0 */
+							439 0xe0	/* MX51_PAD_KEY_ROW1__KEY_ROW1 */
+							440 0xe0	/* MX51_PAD_KEY_ROW2__KEY_ROW2 */
+							441 0xe0	/* MX51_PAD_KEY_ROW3__KEY_ROW3 */
+							442 0xe8	/* MX51_PAD_KEY_COL0__KEY_COL0 */
+							444 0xe8	/* MX51_PAD_KEY_COL1__KEY_COL1 */
+							446 0xe8	/* MX51_PAD_KEY_COL2__KEY_COL2 */
+							448 0xe8	/* MX51_PAD_KEY_COL3__KEY_COL3 */
+						>;
+					};
 				};
 			};
 

arch/arm/boot/dts/imx53-ard.dts

@@ -21,72 +21,6 @@ memory {
 		reg = <0x70000000 0x40000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_2>;
-					cd-gpios = <&gpio1 1 0>;
-					wp-gpios = <&gpio1 9 0>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@53fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
-							1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
-							486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
-							739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
-							218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
-							226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
-							233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
-							241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
-							429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
-							435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
-							441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
-							448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
-							456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
-							464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
-							471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
-							477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
-							492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
-							500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
-							508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
-							516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
-							524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
-							532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
-							540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
-							548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
-							637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
-							642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
-							647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
-							652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
-							657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
-							662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
-							667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
-							611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
-							616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
-							607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@53fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_2>;
-				status = "okay";
-			};
-		};
-	};
-
 	eim-cs1@f4000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -162,3 +96,63 @@ volume-down {
 		};
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_2>;
+	cd-gpios = <&gpio1 1 0>;
+	wp-gpios = <&gpio1 9 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
+				1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
+				486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
+				739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
+				218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+				226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+				233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+				241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+				429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+				435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+				441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+				448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+				456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+				464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+				471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+				477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+				492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+				500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+				508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+				516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+				524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+				532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+				540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+				548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+				637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+				642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+				647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+				652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+				657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+				662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+				667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+				611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+				616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+				607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-evk.dts

@@ -21,18 +21,26 @@ memory {
 		reg = <0x70000000 0x80000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
 	cd-gpios = <&gpio3 13 0>;
 	wp-gpios = <&gpio3 14 0>;
 	status = "okay";
-				};
+};
 
-				ecspi@50010000 { /* ECSPI1 */
+&ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1_1>;
 	fsl,spi-num-chipselects = <2>;
@@ -57,18 +65,17 @@ partition@40000 {
 			reg = <0x40000 0x3c0000>;
 		};
 	};
-				};
+};
 
-				esdhc@50020000 { /* ESDHC3 */
+&esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	cd-gpios = <&gpio3 11 0>;
 	wp-gpios = <&gpio3 12 0>;
 	status = "okay";
-				};
-			};
+};
 
-			iomuxc@53fa8000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -86,17 +93,15 @@ pinctrl_hog: hoggrp {
 			>;
 		};
 	};
-			};
+};
 
-			uart1: serial@53fbc000 {
+&uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
 	status = "okay";
-			};
-		};
+};
 
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
+&i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2_1>;
 	status = "okay";
@@ -110,25 +115,12 @@ codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 	};
-			};
+};
 
-			ethernet@63fec000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec_1>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 0>;
 	status = "okay";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		green {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
 };

arch/arm/boot/dts/imx53-mba53.dts

+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53-tqma53.dtsi"
+
+/ {
+	model = "TQ MBa53 starter kit";
+	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+};
+
+&iomuxc {
+	lvds1 {
+		pinctrl_lvds1_1: lvds1-grp1 {
+			fsl,pins = <730 0x10000		/* LVDS0_TX3 */
+				    732 0x10000		/* LVDS0_CLK */
+				    734 0x10000		/* LVDS0_TX2 */
+				    736 0x10000		/* LVDS0_TX1 */
+				    738 0x10000>;	/* LVDS0_TX0 */
+		};
+
+		pinctrl_lvds1_2: lvds1-grp2 {
+			fsl,pins = <720 0x10000		/* LVDS1_TX3 */
+				    722 0x10000		/* LVDS1_TX2 */
+				    724 0x10000		/* LVDS1_CLK */
+				    726 0x10000		/* LVDS1_TX1 */
+				    728 0x10000>;	/* LVDS1_TX0 */
+		};
+	};
+
+	disp1 {
+		pinctrl_disp1_1: disp1-grp1 {
+			fsl,pins = <689 0x10000		/* DISP1_DRDY	*/
+				    482 0x10000		/* DISP1_HSYNC	*/
+				    489 0x10000		/* DISP1_VSYNC	*/
+				    684 0x10000		/* DISP1_DAT_0	*/
+				    515 0x10000		/* DISP1_DAT_22	*/
+				    523 0x10000		/* DISP1_DAT_23	*/
+				    543 0x10000		/* DISP1_DAT_21	*/
+				    553 0x10000		/* DISP1_DAT_20	*/
+				    558 0x10000		/* DISP1_DAT_19	*/
+				    564 0x10000		/* DISP1_DAT_18	*/
+				    570 0x10000		/* DISP1_DAT_17	*/
+				    575 0x10000		/* DISP1_DAT_16	*/
+				    580 0x10000		/* DISP1_DAT_15	*/
+				    585 0x10000		/* DISP1_DAT_14	*/
+				    590 0x10000		/* DISP1_DAT_13	*/
+				    595 0x10000		/* DISP1_DAT_12	*/
+				    628 0x10000		/* DISP1_DAT_11	*/
+				    634 0x10000		/* DISP1_DAT_10	*/
+				    639 0x10000		/* DISP1_DAT_9	*/
+				    644 0x10000		/* DISP1_DAT_8	*/
+				    649 0x10000		/* DISP1_DAT_7	*/
+				    654 0x10000		/* DISP1_DAT_6	*/
+				    659 0x10000		/* DISP1_DAT_5	*/
+				    664 0x10000		/* DISP1_DAT_4	*/
+				    669 0x10000		/* DISP1_DAT_3	*/
+				    674 0x10000		/* DISP1_DAT_2	*/
+				    679 0x10000		/* DISP1_DAT_1	*/
+				    684 0x10000>;	/* DISP1_DAT_0	*/
+		};
+	};
+};
+
+&cspi {
+	status = "okay";
+};
+
+&i2c2 {
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	expander: pca9554@20 {
+		compatible = "pca9554";
+		reg = <0x20>;
+		interrupts = <109>;
+	};
+
+	sensor2: lm75@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&esdhc2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};

arch/arm/boot/dts/imx53-qsb.dts

@@ -21,31 +21,89 @@ memory {
 		reg = <0x70000000 0x40000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 8 0>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p2v: 3p2v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
 	cd-gpios = <&gpio3 13 0>;
 	status = "okay";
-				};
+};
 
-				ssi2: ssi@50014000 {
+&ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
-				};
+};
 
-				esdhc@50020000 { /* ESDHC3 */
+&esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	cd-gpios = <&gpio3 11 0>;
 	wp-gpios = <&gpio3 12 0>;
 	status = "okay";
-				};
-			};
+};
 
-			iomuxc@53fa8000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -71,17 +129,15 @@ led_pin_gpio7_7: led_gpio7_7@0 {
 		};
 	};
 
-			};
+};
 
-			uart1: serial@53fbc000 {
+&uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
 	status = "okay";
-			};
-		};
+};
 
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
+&i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2_1>;
 	status = "okay";
@@ -92,9 +148,9 @@ sgtl5000: codec@0a {
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
 	};
-			};
+};
 
-			i2c@63fc8000 { /* I2C1 */
+&i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1_1>;
 	status = "okay";
@@ -197,82 +253,18 @@ ldo10_reg: ldo10 {
 			};
 		};
 	};
-			};
+};
 
-			audmux@63fd0000 {
+&audmux {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux_1>;
 	status = "okay";
-			};
+};
 
-			ethernet@63fec000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec_1>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 0>;
 	status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 0>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p2v: 3p2v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
 };

arch/arm/boot/dts/imx53-smd.dts

@@ -21,32 +21,46 @@ memory {
 		reg = <0x70000000 0x40000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
+};
+
+&esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
 	cd-gpios = <&gpio3 13 0>;
 	wp-gpios = <&gpio4 11 0>;
 	status = "okay";
-				};
+};
 
-				esdhc@50008000 { /* ESDHC2 */
+&esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2_1>;
 	non-removable;
 	status = "okay";
-				};
+};
 
-				uart3: serial@5000c000 {
+&uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
-				};
+};
 
-				ecspi@50010000 { /* ECSPI1 */
+&ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1_1>;
 	fsl,spi-num-chipselects = <2>;
@@ -77,17 +91,16 @@ partition@40000 {
 			reg = <0x40000 0x3c0000>;
 		};
 	};
-				};
+};
 
-				esdhc@50020000 { /* ESDHC3 */
+&esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	non-removable;
 	status = "okay";
-				};
-			};
+};
 
-			iomuxc@53fa8000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -104,23 +117,21 @@ pinctrl_hog: hoggrp {
 			>;
 		};
 	};
-			};
+};
 
-			uart1: serial@53fbc000 {
+&uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
 	status = "okay";
-			};
+};
 
-			uart2: serial@53fc0000 {
+&uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_1>;
 	status = "okay";
-			};
-		};
+};
 
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
+&i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2_1>;
 	status = "okay";
@@ -139,9 +150,9 @@ touchkey: mpr121@5a {
 		compatible = "fsl,mpr121";
 		reg = <0x5a>;
 	};
-			};
+};
 
-			i2c@63fc8000 { /* I2C1 */
+&i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1_1>;
 	status = "okay";
@@ -160,31 +171,12 @@ pmic: dialog@48 {
 		compatible = "dialog,da9053", "dialog,da9052";
 		reg = <0x48>;
 	};
-			};
+};
 
-			ethernet@63fec000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec_1>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 0>;
 	status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
 };

arch/arm/boot/dts/imx53-tqma53.dtsi

+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "imx53.dtsi"
+
+/ {
+	model = "TQ TQMa53";
+	compatible = "tq,tqma53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 0>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
+		   <&gpio3 24 0>, <&gpio3 25 0>;
+	status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	i2s {
+		pinctrl_i2s_1: i2s-grp1 {
+			fsl,pins = <
+				 1   0x10000	/* I2S_MCLK */
+				 10  0x10000	/* I2S_SCLK */
+				 17  0x10000	/* I2S_DOUT */
+				 23  0x10000	/* I2S_LRCLK*/
+				 30  0x10000	/* I2S_DIN  */
+			>;
+		};
+	};
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				 610  0x10000	/* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/
+				 711  0x10000	/* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/
+				 873  0x10000	/* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/
+				 878  0x10000	/* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/
+				 922  0x10000	/* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/
+				 928  0x10000	/* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/
+				 982  0x10000	/* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/
+				 989  0x10000	/* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/
+				 1069 0x10000	/* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/
+				 1093 0x10000	/* MX53_PAD_GPIO_3__GPIO1_3 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_2>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_1>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_1>;
+	status = "disabled";
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi_1>;
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
+		   <&gpio1 21 0>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+		fsl,mc13xxx-uses-rtc;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 8>; /* PDATA_DATA6, low active */
+	};
+
+	sensor1: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	eeprom: 24c64@50 {
+		compatible = "at,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	status = "disabled";
+};

arch/arm/boot/dts/imx53.dtsi

@@ -274,6 +274,44 @@ pinctrl_fec_1: fecgrp-1 {
 					};
 				};
 
+				csi {
+					pinctrl_csi_1: csigrp-1 {
+						fsl,pins = <
+							286 0x1d5	/* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */
+							291 0x1d5	/* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */
+							280 0x1d5	/* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */
+							276 0x1d5	/* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */
+							409 0x1d5	/* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */
+							402 0x1d5	/* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */
+							395 0x1d5	/* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */
+							388 0x1d5	/* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */
+							381 0x1d5	/* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */
+							374 0x1d5	/* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */
+							367 0x1d5	/* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */
+							360 0x1d5	/* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */
+							352 0x1d5	/* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */
+							344 0x1d5	/* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */
+							336 0x1d5	/* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */
+							328 0x1d5	/* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */
+							320 0x1d5	/* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */
+							312 0x1d5	/* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */
+							304 0x1d5	/* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */
+							296 0x1d5	/* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */
+							276 0x1d5	/* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */
+						>;
+					};
+				};
+
+				cspi {
+					pinctrl_cspi_1: cspigrp-1 {
+						fsl,pins = <
+							998  0x1d5	/* MX53_PAD_SD1_DATA0__CSPI_MISO */
+							1008 0x1d5	/* MX53_PAD_SD1_CMD__CSPI_MOSI */
+							1022 0x1d5	/* MX53_PAD_SD1_CLK__CSPI_SCLK */
+						>;
+					};
+				};
+
 				ecspi1 {
 					pinctrl_ecspi1_1: ecspi1grp-1 {
 						fsl,pins = <
@@ -349,6 +387,13 @@ pinctrl_can1_1: can1grp-1 {
 							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
 						>;
 					};
+
+					pinctrl_can1_2: can1grp-2 {
+						fsl,pins = <
+							37  0x80000000  /* MX53_PAD_KEY_COL2__CAN1_TXCAN */
+							44  0x80000000  /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */
+						>;
+					};
 				};
 
 				can2 {
@@ -387,6 +432,14 @@ pinctrl_i2c3_1: i2c3grp-1 {
 					};
 				};
 
+				owire {
+					pinctrl_owire_1: owiregrp-1 {
+						fsl,pins = <
+								1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -421,6 +474,14 @@ pinctrl_uart3_1: uart3grp-1 {
 							880 0x1c5	/* MX53_PAD_PATA_DA_2__UART3_RTS */
 						>;
 					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							884 0x1c5	/* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+							888 0x1c5	/* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+						>;
+					};
+
 				};
 
 				uart4 {
@@ -570,6 +631,13 @@ uart5: serial@63f90000 {
 				status = "disabled";
 			};
 
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
 			ecspi2: ecspi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/imx6dl.dtsi

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "imx6qdl.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	soc {
+		aips1: aips-bus@02000000 {
+			pxp: pxp@020f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 0x04>;
+			};
+
+			epdc: epdc@020f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 0x04>;
+			};
+
+			lcdif: lcdif@020f8000 {
+				reg = <0x020f8000 0x4000>;
+				interrupts = <0 39 0x04>;
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <0 35 0x04>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx6q-arm2.dts

@@ -21,15 +21,36 @@ memory {
 		reg = <0x10000000 0x80000000>;
 	};
 
-	soc {
-		gpmi-nand@00112000 {
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio3 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
 	status = "disabled"; /* gpmi nand conflicts with SD */
-		};
+};
 
-		aips-bus@02000000 { /* AIPS1 */
-			iomuxc@020e0000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -49,18 +70,16 @@ pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
 			>;
 		};
 	};
-			};
-		};
+};
 
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_2>;
 	phy-mode = "rgmii";
 	status = "okay";
-			};
+};
 
-			usdhc@02198000 { /* uSDHC3 */
+&usdhc3 {
 	cd-gpios = <&gpio6 11 0>;
 	wp-gpios = <&gpio6 14 0>;
 	vmmc-supply = <&reg_3p3v>;
@@ -68,43 +87,18 @@ usdhc@02198000 { /* uSDHC3 */
 	pinctrl-0 = <&pinctrl_usdhc3_1
 		     &pinctrl_usdhc3_arm2>;
 	status = "okay";
-			};
+};
 
-			usdhc@0219c000 { /* uSDHC4 */
+&usdhc4 {
 	non-removable;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4_1>;
 	status = "okay";
-			};
+};
 
-			uart4: serial@021f0000 {
+&uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
 	status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
 };

arch/arm/boot/dts/imx6q-sabreauto.dts

@@ -20,10 +20,9 @@ / {
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
+};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			iomuxc@020e0000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -35,30 +34,25 @@ pinctrl_hog: hoggrp {
 			>;
 		};
 	};
-			};
-		};
+};
 
-		aips-bus@02100000 { /* AIPS2 */
-			uart4: serial@021f0000 {
+&uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
 	status = "okay";
-			};
+};
 
-			ethernet@02188000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_2>;
 	phy-mode = "rgmii";
 	status = "okay";
-			};
+};
 
-			usdhc@02198000 { /* uSDHC3 */
+&usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";
-			};
-		};
-	};
 };

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -21,10 +21,51 @@ memory {
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				ecspi@02008000 { /* eCSPI1 */
+	regulators {
+		compatible = "simple-bus";
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
@@ -36,15 +77,14 @@ flash: m25p80@0 {
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
-				};
+};
 
-				ssi1: ssi@02028000 {
+&ssi1 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
-				};
-			};
+};
 
-			iomuxc@020e0000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -62,61 +102,59 @@ pinctrl_hog: hoggrp {
 			>;
 		};
 	};
-			};
-		};
+};
 
-		aips-bus@02100000 { /* AIPS2 */
-			usb@02184000 { /* USB OTG */
+&usbotg {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg_1>;
 	disable-over-current;
 	status = "okay";
-			};
+};
 
-			usb@02184200 { /* USB1 */
+&usbh1 {
 	status = "okay";
-			};
+};
 
-			ethernet@02188000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 23 0>;
 	status = "okay";
-			};
+};
 
-			usdhc@02198000 { /* uSDHC3 */
+&usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_2>;
 	cd-gpios = <&gpio7 0 0>;
 	wp-gpios = <&gpio7 1 0>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
-			};
+};
 
-			usdhc@0219c000 { /* uSDHC4 */
+&usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4_2>;
 	cd-gpios = <&gpio2 6 0>;
 	wp-gpios = <&gpio2 7 0>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
-			};
+};
 
-			audmux@021d8000 {
+&audmux {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux_1>;
-			};
+};
 
-			uart2: serial@021e8000 {
+&uart2 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_1>;
-			};
+};
 
-			i2c@021a0000 { /* I2C1 */
+&i2c1 {
 	status = "okay";
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -129,50 +167,4 @@ codec: sgtl5000@0a {
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_2p5v: 2p5v {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
 };

arch/arm/boot/dts/imx6q-sabresd.dts

@@ -21,17 +21,30 @@ memory {
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				uart1: serial@02020000 {
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
+};
+
+&uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
 	status = "okay";
-				};
-			};
+};
 
-			iomuxc@020e0000 {
+&iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
@@ -47,48 +60,27 @@ pinctrl_hog: hoggrp {
 			>;
 		};
 	};
-			};
-		};
+};
 
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
+&fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
 	status = "okay";
-			};
+};
 
-			usdhc@02194000 { /* uSDHC2 */
+&usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
 	status = "okay";
-			};
+};
 
-			usdhc@02198000 { /* uSDHC3 */
+&usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
 	status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 4 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 5 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
 };

arch/arm/boot/dts/imx6q.dtsi

+
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
+ * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+/include/ "imx6qdl.dtsi"
 
 / {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -38,12 +21,19 @@ cpu@0 {
 			next-level-cache = <&L2>;
 			operating-points = <
 				/* kHz    uV */
-				792000  1100000
+				1200000 1275000
+				996000  1250000
+				792000  1150000
 				396000  950000
-				198000  850000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
-			cpu0-supply = <&reg_cpu>;
+			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+				 <&clks 17>, <&clks 170>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
 		cpu@1 {
@@ -65,142 +55,9 @@ cpu@3 {
 		};
 	};
 
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		dma-apbh@00110000 {
-			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x00110000 0x2000>;
-			clocks = <&clks 106>;
-		};
-
-		nfc: gpmi-nand@00112000 {
-			compatible = "fsl,imx6q-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 13 0x04>, <0 15 0x04>;
-			interrupt-names = "gpmi-dma", "bch";
-			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
-				 <&clks 150>, <&clks 149>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			fsl,gpmi-dma-channel = <0>;
-			status = "disabled";
-		};
-
-		timer@00a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		L2: l2-cache@00a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
 		aips-bus@02000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
 			spba-bus@02000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@02004000 {
-					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
-				};
-
-				ecspi1: ecspi@02008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
-					clocks = <&clks 112>, <&clks 112>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: ecspi@0200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
-					clocks = <&clks 113>, <&clks 113>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: ecspi@02010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
-					clocks = <&clks 114>, <&clks 114>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: ecspi@02014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
-					clocks = <&clks 115>, <&clks 115>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
 				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -211,361 +68,6 @@ ecspi5: ecspi@02018000 {
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
-
-				uart1: serial@02020000 {
-					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
-					clocks = <&clks 160>, <&clks 161>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				esai: esai@02024000 {
-					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 0x04>;
-				};
-
-				ssi1: ssi@02028000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
-					clocks = <&clks 178>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <38 37>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@0202c000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
-					clocks = <&clks 179>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <42 41>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@02030000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
-					clocks = <&clks 180>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <46 45>;
-					status = "disabled";
-				};
-
-				asrc: asrc@02034000 {
-					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 0x04>;
-				};
-
-				spba@0203c000 {
-					reg = <0x0203c000 0x4000>;
-				};
-			};
-
-			vpu: vpu@02040000 {
-				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 0x04 0 12 0x04>;
-			};
-
-			aipstz@0207c000 { /* AIPSTZ1 */
-				reg = <0x0207c000 0x4000>;
-			};
-
-			pwm1: pwm@02080000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
-				clocks = <&clks 62>, <&clks 145>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm2: pwm@02084000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
-				clocks = <&clks 62>, <&clks 146>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm3: pwm@02088000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
-				clocks = <&clks 62>, <&clks 147>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm4: pwm@0208c000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
-				clocks = <&clks 62>, <&clks 148>;
-				clock-names = "ipg", "per";
-			};
-
-			can1: flexcan@02090000 {
-				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 0x04>;
-			};
-
-			can2: flexcan@02094000 {
-				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 0x04>;
-			};
-
-			gpt: gpt@02098000 {
-				compatible = "fsl,imx6q-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
-			};
-
-			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@020b0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 0x04 0 77 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@020b4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 0x04 0 79 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: kpp@020b8000 {
-				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
-			};
-
-			wdog1: wdog@020bc000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
-				clocks = <&clks 0>;
-			};
-
-			wdog2: wdog@020c0000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
-				clocks = <&clks 0>;
-				status = "disabled";
-			};
-
-			clks: ccm@020c4000 {
-				compatible = "fsl,imx6q-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
-				#clock-cells = <1>;
-			};
-
-			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
-
-				regulator-1p1@110 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-				};
-
-				regulator-3p0@120 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-				};
-
-				regulator-2p5@130 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2750000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2000000>;
-					anatop-max-voltage = <2750000>;
-				};
-
-				reg_cpu: regulator-vddcore@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				regulator-vddpu@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				regulator-vddsoc@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-			};
-
-			usbphy1: usbphy@020c9000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
-				clocks = <&clks 182>;
-			};
-
-			usbphy2: usbphy@020ca000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
-				clocks = <&clks 183>;
-			};
-
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
-
-				snvs-rtc-lp@34 {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
-					interrupts = <0 19 0x04 0 20 0x04>;
-				};
-			};
-
-			epit1: epit@020d0000 { /* EPIT1 */
-				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
-			};
-
-			epit2: epit@020d4000 { /* EPIT2 */
-				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
-			};
-
-			src: src@020d8000 {
-				compatible = "fsl,imx6q-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
-			};
-
-			gpc: gpc@020dc000 {
-				compatible = "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04 0 90 0x04>;
-			};
-
-			gpr: iomuxc-gpr@020e0000 {
-				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e0000 0x38>;
 			};
 
 			iomuxc: iomuxc@020e0000 {
@@ -780,272 +282,6 @@ pinctrl_usdhc4_2: usdhc4grp-2 {
 					};
 				};
 			};
-
-			dcic1: dcic@020e4000 {
-				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 0x04>;
-			};
-
-			dcic2: dcic@020e8000 {
-				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 0x04>;
-			};
-
-			sdma: sdma@020ec000 {
-				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
-				clocks = <&clks 155>, <&clks 155>;
-				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			caam@02100000 {
-				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 0x04 0 106 0x04>;
-			};
-
-			aipstz@0217c000 { /* AIPSTZ2 */
-				reg = <0x0217c000 0x4000>;
-			};
-
-			usbotg: usb@02184000 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <0 43 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@02184200 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				status = "disabled";
-			};
-
-			usbh2: usb@02184400 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <0 41 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbmisc = <&usbmisc 2>;
-				status = "disabled";
-			};
-
-			usbh3: usb@02184600 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184600 0x200>;
-				interrupts = <0 42 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbmisc = <&usbmisc 3>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc: usbmisc@02184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks 162>;
-			};
-
-			fec: ethernet@02188000 {
-				compatible = "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <0 118 0x04 0 119 0x04>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			mlb@0218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
-			};
-
-			usdhc1: usdhc@02190000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
-				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@02194000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
-				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: usdhc@02198000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
-				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: usdhc@0219c000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
-				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@021a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
-				clocks = <&clks 125>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@021a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
-				clocks = <&clks 126>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@021a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
-				clocks = <&clks 127>;
-				status = "disabled";
-			};
-
-			romcp@021ac000 {
-				reg = <0x021ac000 0x4000>;
-			};
-
-			mmdc0: mmdc@021b0000 { /* MMDC0 */
-				compatible = "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-			};
-
-			mmdc1: mmdc@021b4000 { /* MMDC1 */
-				reg = <0x021b4000 0x4000>;
-			};
-
-			weim@021b8000 {
-				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
-			};
-
-			ocotp@021bc000 {
-				reg = <0x021bc000 0x4000>;
-			};
-
-			ocotp@021c0000 {
-				reg = <0x021c0000 0x4000>;
-				interrupts = <0 21 0x04>;
-			};
-
-			tzasc@021d0000 { /* TZASC1 */
-				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 0x04>;
-			};
-
-			tzasc@021d4000 { /* TZASC2 */
-				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 0x04>;
-			};
-
-			audmux: audmux@021d8000 {
-				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			mipi@021dc000 { /* MIPI-CSI */
-				reg = <0x021dc000 0x4000>;
-			};
-
-			mipi@021e0000 { /* MIPI-DSI */
-				reg = <0x021e0000 0x4000>;
-			};
-
-			vdoa@021e4000 {
-				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 0x04>;
-			};
-
-			uart2: serial@021e8000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@021ec000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@021f0000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@021f4000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		ipu1: ipu@02400000 {
-			#crtc-cells = <1>;
-			compatible = "fsl,imx6q-ipu";
-			reg = <0x02400000 0x400000>;
-			interrupts = <0 6 0x4 0 5 0x4>;
-			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
-			clock-names = "bus", "di0", "di1";
 		};
 
 		ipu2: ipu@02800000 {

arch/arm/boot/dts/imx6qdl.dtsi

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		dma-apbh@00110000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x00110000 0x2000>;
+			clocks = <&clks 106>;
+		};
+
+		gpmi: gpmi-nand@00112000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 13 0x04>, <0 15 0x04>;
+			interrupt-names = "gpmi-dma", "bch";
+			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+				 <&clks 150>, <&clks 149>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			fsl,gpmi-dma-channel = <0>;
+			status = "disabled";
+		};
+
+		timer@00a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 0x04>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips-bus@02000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 0x04>;
+				};
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 0x04>;
+					clocks = <&clks 112>, <&clks 112>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 0x04>;
+					clocks = <&clks 113>, <&clks 113>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 0x04>;
+					clocks = <&clks 114>, <&clks 114>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 0x04>;
+					clocks = <&clks 115>, <&clks 115>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 0x04>;
+					clocks = <&clks 160>, <&clks 161>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				esai: esai@02024000 {
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 0x04>;
+				};
+
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 0x04>;
+					clocks = <&clks 178>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <38 37>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@0202c000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 0x04>;
+					clocks = <&clks 179>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <42 41>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 0x04>;
+					clocks = <&clks 180>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <46 45>;
+					status = "disabled";
+				};
+
+				asrc: asrc@02034000 {
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 0x04>;
+				};
+
+				spba@0203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu: vpu@02040000 {
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 3 0x04 0 12 0x04>;
+			};
+
+			aipstz@0207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm1: pwm@02080000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 0x04>;
+				clocks = <&clks 62>, <&clks 145>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm2: pwm@02084000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 0x04>;
+				clocks = <&clks 62>, <&clks 146>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm3: pwm@02088000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 0x04>;
+				clocks = <&clks 62>, <&clks 147>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm4: pwm@0208c000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 0x04>;
+				clocks = <&clks 62>, <&clks 148>;
+				clock-names = "ipg", "per";
+			};
+
+			can1: flexcan@02090000 {
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 0x04>;
+			};
+
+			can2: flexcan@02094000 {
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 0x04>;
+			};
+
+			gpt: gpt@02098000 {
+				compatible = "fsl,imx6q-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 0x04>;
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 0x04 0 67 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 0x04 0 69 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 0x04 0 71 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 0x04 0 73 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 0x04 0 75 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@020b0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 0x04 0 77 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@020b4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 0x04 0 79 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@020b8000 {
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 0x04>;
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 0x04>;
+				clocks = <&clks 0>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 0x04>;
+				clocks = <&clks 0>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 0x04 0 88 0x04>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+				regulator-1p1@110 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1375000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+				};
+
+				regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+				};
+
+				regulator-2p5@130 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2000000>;
+					anatop-max-voltage = <2750000>;
+				};
+
+				reg_arm: regulator-vddcore@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 0x04>;
+				clocks = <&clks 182>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 0x04>;
+				clocks = <&clks 183>;
+			};
+
+			snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <0 19 0x04 0 20 0x04>;
+				};
+			};
+
+			epit1: epit@020d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 0x04>;
+			};
+
+			epit2: epit@020d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 0x04>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6q-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 0x04 0 96 0x04>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupts = <0 89 0x04 0 90 0x04>;
+			};
+
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
+			dcic1: dcic@020e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 0x04>;
+			};
+
+			dcic2: dcic@020e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 0x04>;
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 0x04>;
+				clocks = <&clks 155>, <&clks 155>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			caam@02100000 {
+				reg = <0x02100000 0x40000>;
+				interrupts = <0 105 0x04 0 106 0x04>;
+			};
+
+			aipstz@0217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			usbotg: usb@02184000 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@02184200 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbh2: usb@02184400 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 2>;
+				status = "disabled";
+			};
+
+			usbh3: usb@02184600 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 3>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks 162>;
+			};
+
+			fec: ethernet@02188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 118 0x04 0 119 0x04>;
+				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			mlb@0218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 0x04>;
+				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 0x04>;
+				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 0x04>;
+				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@0219c000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 0x04>;
+				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 0x04>;
+				clocks = <&clks 125>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 0x04>;
+				clocks = <&clks 126>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 0x04>;
+				clocks = <&clks 127>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			mmdc1: mmdc@021b4000 { /* MMDC1 */
+				reg = <0x021b4000 0x4000>;
+			};
+
+			weim@021b8000 {
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 0x04>;
+			};
+
+			ocotp@021bc000 {
+				compatible = "fsl,imx6q-ocotp";
+				reg = <0x021bc000 0x4000>;
+			};
+
+			ocotp@021c0000 {
+				reg = <0x021c0000 0x4000>;
+				interrupts = <0 21 0x04>;
+			};
+
+			tzasc@021d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 0x04>;
+			};
+
+			tzasc@021d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 0x04>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			mipi@021dc000 { /* MIPI-CSI */
+				reg = <0x021dc000 0x4000>;
+			};
+
+			mipi@021e0000 { /* MIPI-DSI */
+				reg = <0x021e0000 0x4000>;
+			};
+
+			vdoa@021e4000 {
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 0x04>;
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		ipu1: ipu@02400000 {
+			#crtc-cells = <1>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02400000 0x400000>;
+			interrupts = <0 6 0x4 0 5 0x4>;
+			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+			clock-names = "bus", "di0", "di1";
+		};
+	};
+};

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -83,6 +83,7 @@ enum imx5_clks {
 	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
 	can_sel, can1_serial_gate, can1_ipg_gate,
+	owire_gate,
 	clk_max
 };
 
@@ -233,6 +234,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
 	clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
 	clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))

arch/arm/mach-imx/clk-imx6q.c

@@ -164,8 +164,8 @@ enum mx6q_clks {
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
-	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref,
-	clk_max
+	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
+	usbphy2_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -218,8 +218,21 @@ int __init mx6q_clocks_init(void)
 	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
 	clk[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x0);
 
-	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
-	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+	/*
+	 * Bit 20 is the reserved and read-only bit, we do this only for:
+	 * - Do nothing for usbphy clk_enable/disable
+	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
+	 * the clk framework may need to enable/disable usbphy's parent
+	 */
+	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+	/*
+	 * usbphy*_gate needs to be on after system boots up, and software
+	 * never needs to control it anymore.
+	 */
+	clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
 
 	clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
 	clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
@@ -446,6 +459,11 @@ int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
+	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+		clk_prepare_enable(clk[usbphy1_gate]);
+		clk_prepare_enable(clk[usbphy2_gate]);
+	}
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 

arch/arm/mach-imx/mach-imx6q.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
@@ -22,6 +23,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/opp.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
@@ -200,6 +202,64 @@ static void __init imx6q_init_machine(void)
 	imx6q_1588_init();
 }
 
+#define OCOTP_CFG3			0x440
+#define OCOTP_CFG3_SPEED_SHIFT		16
+#define OCOTP_CFG3_SPEED_1P2GHZ		0x3
+
+static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
+{
+	struct device_node *np;
+	void __iomem *base;
+	u32 val;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
+	if (!np) {
+		pr_warn("failed to find ocotp node\n");
+		return;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_warn("failed to map ocotp\n");
+		goto put_node;
+	}
+
+	val = readl_relaxed(base + OCOTP_CFG3);
+	val >>= OCOTP_CFG3_SPEED_SHIFT;
+	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
+		if (opp_disable(cpu_dev, 1200000000))
+			pr_warn("failed to disable 1.2 GHz OPP\n");
+
+put_node:
+	of_node_put(np);
+}
+
+static void __init imx6q_opp_init(struct device *cpu_dev)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_path("/cpus/cpu@0");
+	if (!np) {
+		pr_warn("failed to find cpu0 node\n");
+		return;
+	}
+
+	cpu_dev->of_node = np;
+	if (of_init_opp_table(cpu_dev)) {
+		pr_warn("failed to init OPP table\n");
+		goto put_node;
+	}
+
+	imx6q_opp_check_1p2ghz(cpu_dev);
+
+put_node:
+	of_node_put(np);
+}
+
+struct platform_device imx6q_cpufreq_pdev = {
+	.name = "imx6q-cpufreq",
+};
+
 static void __init imx6q_init_late(void)
 {
 	/*
@@ -208,6 +268,11 @@ static void __init imx6q_init_late(void)
 	 */
 	if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
 		imx6q_cpuidle_init();
+
+	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
+		imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
+		platform_device_register(&imx6q_cpufreq_pdev);
+	}
 }
 
 static void __init imx6q_map_io(void)

drivers/w1/masters/mxc_w1.c

@@ -157,9 +157,16 @@ static int mxc_w1_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id mxc_w1_dt_ids[] = {
+	{ .compatible = "fsl,imx21-owire" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
+
 static struct platform_driver mxc_w1_driver = {
 	.driver = {
 		.name = "mxc_w1",
+		.of_match_table = mxc_w1_dt_ids,
 	},
 	.probe = mxc_w1_probe,
 	.remove = mxc_w1_remove,