Merge kozmo.(none):/usr/src/linus-2.5

into kozmo.(none):/usr/src/fbdev-2.5

CREDITS

@@ -2846,6 +2846,7 @@ S: 76131 Karlsruhe
 S: Germany
 
 N: James Simmons 
+E: jsimmons@infradead.org
 E: jsimmons@users.sf.net 
 D: Frame buffer device maintainer
 D: input layer developement 

Documentation/fb/intel810.txt

+Intel 810/815 Framebuffer driver
+ 	Tony Daplas <adaplas@pol.net>
+	http://i810fb.sourceforge.net
+
+	March 17, 2002
+
+	First Released: July 2001
+================================================================
+
+A. Introduction
+	This is a framebuffer driver for various Intel 810/815 compatible
+graphics devices.  These would include:
+
+	Intel 810
+	Intel 810E
+	Intel 810-DC100
+	Intel 815 Internal graphics only, 100Mhz FSB
+	Intel 815 Internal graphics only
+	Intel 815 Internal graphics and AGP
+
+B.  Features
+
+        - Choice of using Discrete Video Timings, VESA Generalized Timing
+	  Formula, or a framebuffer specific database to set the video mode
+
+	- Supports a variable range of horizontal and vertical resolution, and
+	  vertical refresh rates if the VESA Generalized Timing Formula is 
+	  enabled.
+
+        - Supports color depths of 8, 16, 24 and 32 bits per pixel
+
+	- Supports pseudocolor, directcolor, or truecolor visuals
+
+        - Full and optimized hardware acceleration at 8, 16 and 24 bpp
+
+	- Robust video state save and restore
+
+        - MTRR support 
+
+	- Utilizes user-entered monitor specifications to automatically
+	  calculate required video mode parameters.
+
+	- Can concurrently run with xfree86 running with native i810 drivers 
+
+	- Hardware Cursor Support
+ 
+C.  List of available options
+	
+   a. "video=i810fb"  
+	enables the i810 driver
+
+	Recommendation: required
+ 
+   b. "xres:<value>"  
+	select horizontal resolution in pixels
+
+	Recommendation: user preference 
+	(default = 640)
+
+   c. "yres:<value>"
+	select vertical resolution in scanlines. If Discrete Video Timings
+	is enabled, this will be ignored and computed as 3*xres/4.  
+
+	Recommendation: user preference
+	(default = 480)
+		
+   d. "vyres:<value>" 
+	select virtual vertical resolution in scanlines. If (0) or none
+	is specified, this will be computed against maximum available memory. 
+
+	Recommendation: do not set
+	(default = 480)
+
+   e. "vram:<value>"
+	select amount of system RAM in MB to allocate for the video memory 
+
+	Recommendation: 1 - 4 MB.
+	(default = 4)
+
+   f. "bpp:<value>"   
+	select desired pixel depth 
+
+	Recommendation: 8
+	(default = 8)
+
+   g. "hsync1/hsync2:<value>" 
+	select the minimum and maximum Horizontal Sync Frequency of the 
+	monitor in KHz.  If a using a fixed frequency monitor, hsync1 must 
+	be equal to hsync2. 
+
+	Recommendation: check monitor manual for correct values
+	default (29/30)
+
+   h. "vsync1/vsync2:<value>" 
+	select the minimum and maximum Vertical Sync Frequency of the monitor
+	in Hz. You can also use this option to lock your monitor's refresh 
+	rate.
+
+	Recommendation: check monitor manual for correct values
+	(default = 60/60)
+
+	IMPORTANT:  If you need to clamp your timings, try to give some 
+	leeway for computational errors (over/underflows).  Example: if 
+	using vsync1/vsync2 = 60/60, make sure hsync1/hsync2 has at least
+	a 1 unit difference, and vice versa.
+
+   i. "voffset:<value>"	
+        select at what offset in MB of the logical memory to allocate the 
+	framebuffer memory.  The intent is to avoid the memory blocks
+	used by standard graphics applications (XFree86).  The default
+        offset (16 MB for a 64MB aperture, 8 MB for a 32MB aperture) will
+        avoid XFree86's usage and allows up to 7MB/15MB of framebuffer
+        memory.  Depending on your usage, adjust the value up or down, 
+	(0 for maximum usage, 31/63 MB for the least amount).  Note, an 
+	arbitrary setting may conflict with XFree86.
+
+	Recommendation: do not set
+	(default = 8 or 16 MB)
+      
+   j. "accel" 
+	enable text acceleration.  This can be enabled/reenabled anytime 
+	by using 'fbset -accel true/false'. 
+
+	Recommendation: enable
+	(default = not set) 
+
+   k. "mtrr" 
+	enable MTRR.  This allows data transfers to the framebuffer memory
+	to occur in bursts which can significantly increase performance.
+	Not very helpful with the i810/i815 because of 'shared memory'. 
+
+	Recommendation: do not set
+	(default = not set) 
+
+   l. "extvga"
+	if specified, secondary/external VGA output will always be enabled.
+	Useful if the BIOS turns off the VGA port when no monitor is attached.
+	The external VGA monitor can then be attached without rebooting. 
+
+	Recommendation: do not set
+	(default = not set)
+	
+   m. "sync" 
+	Forces the hardware engine to do a "sync" or wait for the hardware
+	to finish before starting another instruction. This will produce a 
+	more stable setup, but will be slower.
+
+	Recommendation: do not set
+	(default = not set)
+
+   n. "dcolor"
+        Use directcolor visual instead of truecolor for pixel depths greater
+	than 8 bpp.  Useful for color tuning, such as gamma control.
+
+	Recommendation: do not set
+	(default = not set)
+			
+D. Kernel booting
+
+Separate each option/option-pair by commas (,) and the option from its value
+with a colon (:) as in the following:
+
+video=i810fb:option1,option2:value2
+
+Sample Usage
+------------
+
+In /etc/lilo.conf, add the line:
+
+append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \
+        vsync1:50,vsync2:85,accel,mtrr"
+
+This will initialize the framebuffer to 1024x768 at 8bpp.  The framebuffer
+will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate 
+will be computed based on the hsync1/hsync2 and vsync1/vsync2 values.  
+
+IMPORTANT:
+You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
+better than 640x480 at 60Hz.
+
+E.  Module options
+	
+	The module parameters are essentially similar to the kernel 
+parameters. The main difference is that you need to include a Boolean value 
+(1 for TRUE, and 0 for FALSE) for those options which don't need a value. 
+
+Example, to enable MTRR, include "mtrr=1".
+
+Sample Usage
+------------
+
+Using the same setup as described above, load the module like this:
+
+	modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \
+	         vsync2=85 accel=1 mtrr=1
+
+Or just add the following to /etc/modules.conf
+
+	options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \
+	vsync2=85 accel=1 mtrr=1
+
+and just do a 
+
+	modprobe i810fb
+
+
+F.  Setup
+
+	a. Do your usual method of configuring the kernel. 
+	
+	make menuconfig/xconfig/config
+
+	b. Under "Code Maturity Options", enable "Prompt for experimental/
+	   incomplete code/drivers".
+
+ 	c. Enable agpgart support for the Intel 810/815 on-board graphics.
+	   This is required.  The option is under "Character Devices"
+
+	d. Under "Graphics Support", select "Intel 810/815" either statically
+	   or as a module.  Choose "use VESA GTF for video timings"  if you 
+	   need to maximize the capability of your display.  To be on the 
+	   safe side, you can leave this unselected.  
+  
+        e. If you want a framebuffer console, enable it under "Console 
+	   Drivers"
+
+	f. Compile your kernel. 
+	  	
+	g. Load the driver as described in section D and E.
+	
+	Optional:	
+	h.  If you are going to run XFree86 with its native drivers, the 
+	    standard XFree86 4.1.0 and 4.2.0 drivers should work as is.
+            However, there's a bug in the XFree86 i810 drivers.  It attempts 
+	    to use XAA even when switched to the console. This will crash
+	    your server. I have a fix at this site:  
+	    
+	    http://i810fb.sourceforge.net.  
+
+	    You can either use the patch, or just replace 
+	    
+            /usr/X11R6/lib/modules/drivers/i810_drv.o
+
+	    with the one provided at the website. 	
+
+	i.  Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver
+	    patch to see the chipset in action (or inaction :-).
+
+G.  Acknowledgment:
+	
+	1.  Geert Uytterhoeven - his excellent howto and the virtual
+                                 framebuffer driver code made this possible.
+
+	2.  Jeff Hartmann for his agpgart code.  
+
+	3.  The X developers.  Insights were provided just by reading the
+	    XFree86 source code.
+
+	4.  Intel(c).  For this value-oriented chipset driver and for
+            providing documentation.
+
+	5. Matt Sottek.  His inputs and ideas  helped in making some
+	optimizations possible.
+
+H.  Home Page:
+
+	A more complete, and probably updated information is provided at
+http://i810fb.sourceforge.net.
+
+###########################
+Tony
+

MAINTAINERS

@@ -644,7 +644,7 @@ S:	Supported
 
 FRAMEBUFFER LAYER
 P:	James Simmons, Geert Uytterhoeven	
-M:	jsimmons@users.sf.net, geert@linux-m68k.org	
+M:	jsimmons@infradead.org, geert@linux-m68k.org	
 L:	linux-fbdev-devel@lists.sourceforge.net	
 W:	http://www.linux-fbdev.org
 S:	Supported

drivers/char/vt.c

@@ -130,7 +130,7 @@ extern void console_map_init(void);
 extern void prom_con_init(void);
 #endif
 #ifdef CONFIG_MDA_CONSOLE
-extern void mda_console_init(void);
+extern int mda_console_init(void);
 #endif
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE
 extern int fb_console_init(void);

drivers/video/Kconfig

@@ -295,27 +295,21 @@ config FB_VGA16
 	  vga16fb.o.
 
 config FB_STI
-	bool "Generic STI frame buffer device support"
+	bool "HP STI frame buffer device support"
 	depends on FB && PARISC
+	default y
 	---help---
 	  STI refers to the HP "Standard Text Interface" which is a set of
 	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-	  Enabling this option will implement the linux framebuffer device and
-	  an fbcon color text console using calls to the STI BIOS routines.
-	  The HP framebuffer device is usually planar, uses a strange memory
-	  layout, and changing the plane mask to create colored pixels
-	  requires a call to the STI routines, so do not expect /dev/fb to
-	  actually be useful.  However, it is the best we have as far as
-	  graphics on the HP chipsets due to lack of hardware level
-	  documentation for the various on-board HP chipsets used in these
-	  systems.  It is sufficient for basic text console functions,
-	  including fonts.
-
-	  You should probably enable this option, unless you are having
-	  trouble getting video when booting the kernel (make sure it isn't
-	  just that you are running the console on the serial port, though).
-	  Really old HP boxes may not have STI, and must use the PDC BIOS
-	  console or the IODC BIOS.
+	  Enabling this option will implement the linux framebuffer device
+	  using calls to the STI BIOS routines for initialisation.
+	
+	  If you enable this option, you will get a planar framebuffer device
+	  /dev/fb which will work on the most common HP graphic cards of the
+	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
+	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+	  It is safe to enable this option, so you should probably say "Y".
 
 config FB_MAC
 	bool "Generic Macintosh display support"
@@ -471,6 +465,44 @@ config FB_RIVA
 	  module will be called rivafb.o. If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 
+config FB_I810
+	tristate "Intel 810/815 support (EXPERIMENTAL)"
+	depends on FB && AGP && AGP_INTEL && EXPERIMENTAL && PCI	
+	help
+	  This driver supports the on-board graphics built in to the Intel 810 
+          and 815 chipsets.  Say Y if you have and plan to use such a board.
+
+          The driver is also available as a module ( = code which can be
+          inserted and removed from the running kernel whenever you want). 
+          The module will be called i810fb.o. If you want to compile it as a
+          module, say M here and read <file:Documentation/modules.txt>.
+
+          For more information, please read 
+	  <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+	bool "use VESA Generalized Timing Formula"
+	depends on FB_I810
+	help
+	  If you say Y, then the VESA standard, Generalized Timing Formula 
+          or GTF, will be used to calculate the required video timing values
+	  per video mode.  Since the GTF allows nondiscrete timings 
+          (nondiscrete being a range of values as opposed to discrete being a
+          set of values), you'll be able to use any combination of horizontal 
+	  and vertical resolutions, and vertical refresh rates without having
+	  to specify your own timing parameters.  This is especially useful
+	  to maximize the performance of an aging display, or if you just 
+          have a display with nonstandard dimensions. A VESA compliant 
+	  monitor is recommended, but can still work with non-compliant ones.
+	  If you need or want this, then select this option. The timings may 
+	  not be compliant with Intel's recommended values. Use at your own 
+	  risk.
+
+          If you say N, the driver will revert to discrete video timings 
+	  using a set recommended by Intel in their documentation.
+  
+          If unsure, say N.
+
 config FB_MATROX
 	tristate "Matrox acceleration"
 	depends on FB && PCI
@@ -759,7 +791,7 @@ config FB_TRIDENT
 
 	  The driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
-	  module will be called rivafb.o. If you want to compile it as a
+	  module will be called tridentfb.o. If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 
 config FB_PM3

drivers/video/Makefile

@@ -12,8 +12,7 @@ export-objs    	:= fbmem.o fbcmap.o fbmon.o modedb.o softcursor.o cfbfillrect.o
 
 obj-$(CONFIG_VT)		  += console/
 
-# Add fbmon.o back into obj-$(CONFIG_FB) in 2.5.x
-obj-$(CONFIG_FB)                  += fbmem.o fbcmap.o modedb.o softcursor.o
+obj-$(CONFIG_FB)                  += fbmem.o fbmon.o fbcmap.o modedb.o softcursor.o
 # Only include macmodes.o if we have FB support and are PPC
 ifeq ($(CONFIG_FB),y)
 obj-$(CONFIG_PPC)                 += macmodes.o
@@ -29,11 +28,11 @@ obj-$(CONFIG_FB_ATARI)            += atafb.o
 obj-$(CONFIG_FB_ATY128)           += aty128fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_RADEON)		  += radeonfb.o
 obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IGA)              += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblit.o
+obj-$(CONFIG_FB_IGA)              += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_CONTROL)          += controlfb.o
 obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
 obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
-obj-$(CONFIG_FB_CT65550)          += chipsfb.o
+obj-$(CONFIG_FB_CT65550)          += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_ANAKIN)           += anakinfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_CYBER)            += cyberfb.o
@@ -42,7 +41,7 @@ obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbim
 obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
 obj-$(CONFIG_FB_MAC)              += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o 
 obj-$(CONFIG_FB_HP300)            += hpfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_OF)               += offb.o cfbfillrect.o cfbimgblit.o cfbcopyarea.o
+obj-$(CONFIG_FB_OF)               += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
 obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
 obj-$(CONFIG_FB_RETINAZ3)         += retz3fb.o
 obj-$(CONFIG_FB_CLGEN)            += clgenfb.o
@@ -63,7 +62,7 @@ obj-$(CONFIG_FB_TCX)              += tcxfb.o sbusfb.o
 obj-$(CONFIG_FB_CGFOURTEEN)       += cgfourteenfb.o sbusfb.o
 obj-$(CONFIG_FB_P9100)            += p9100fb.o sbusfb.o
 obj-$(CONFIG_FB_LEO)              += leofb.o sbusfb.o
-obj-$(CONFIG_FB_STI)	          += stifb.o console/sticore.o
+obj-$(CONFIG_FB_STI)              += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_PMAG_BA)          += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_PMAGB_B)          += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_MAXINE)           += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
@@ -74,6 +73,8 @@ obj-$(CONFIG_FB_RIVA)		  += riva/ cfbfillrect.o cfbcopyarea.o \
 	                             cfbimgblt.o vgastate.o
 obj-$(CONFIG_FB_SIS)		  += sis/
 obj-$(CONFIG_FB_ATY)		  += aty/ cfbimgblt.o
+obj-$(CONFIG_FB_I810)             += i810/ cfbfillrect.o cfbcopyarea.o \
+	                             cfbimgblt.o vgastate.o
 
 obj-$(CONFIG_FB_SUN3)             += sun3fb.o
 obj-$(CONFIG_FB_BWTWO)            += bwtwofb.o
@@ -83,7 +84,7 @@ obj-$(CONFIG_FB_VIRTUAL)          += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt
 obj-$(CONFIG_FB_HIT)              += hitfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_E1355)            += epson1355fb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
-obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+obj-$(CONFIG_FB_VOODOO1)          += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 
 # Files generated that shall be removed upon make clean
 clean-files := promcon_tbl.c

drivers/video/aty/atyfb_base.c

@@ -70,7 +70,7 @@
 
 #ifdef __powerpc__
 #include <asm/prom.h>
-#include <video/macmodes.h>
+#include "../macmodes.h"
 #endif
 #ifdef __sparc__
 #include <asm/pbm.h>
@@ -84,9 +84,6 @@
 #ifdef CONFIG_BOOTX_TEXT
 #include <asm/btext.h>
 #endif
-#ifdef CONFIG_NVRAM
-#include <linux/nvram.h>
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
@@ -226,14 +223,9 @@ static char *mode_option __initdata = NULL;
 #endif
 
 #ifdef CONFIG_PPC
-#ifdef CONFIG_NVRAM_NOT_DEFINED
-static int default_vmode __initdata = VMODE_NVRAM;
-static int default_cmode __initdata = CMODE_NVRAM;
-#else
 static int default_vmode __initdata = VMODE_CHOOSE;
 static int default_cmode __initdata = CMODE_CHOOSE;
 #endif
-#endif
 
 #ifdef CONFIG_ATARI
 static unsigned int mach64_count __initdata = 0;
@@ -984,6 +976,7 @@ static int atyfb_release(struct fb_info *info, int user)
 						var.yres_virtual =
 						    var.yres;
 				}
+				fb_set_var(&var, -1, info);
 			}
 		}
 	} 
@@ -1246,8 +1239,8 @@ static void atyfb_save_palette(struct atyfb_par *par, int enter)
 
 static void atyfb_palette(int enter)
 {
-	struct fb_info *info;
 	struct atyfb_par *par;
+	struct fb_info *info;
 	int i;
 
 	for (i = 0; i < FB_MAX; i++) {
@@ -1409,16 +1402,16 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par)
 static int aty_sleep_notify(struct pmu_sleep_notifier *self, int when)
 {
 	struct fb_info *info;
-	struct atyfb_par *par = (struct atyfb_par *) info->fb.par;
+	struct atyfb_par *par; 
 	int result;
 
 	result = PBOOK_SLEEP_OK;
 
 	for (info = first_display; info != NULL; info = par->next) {
-		struct fb_fix_screeninfo fix;
 		int nb;
 
-		nb = fb_display[fg_console].var.yres * info->fix.line_length;
+		par = (struct atyfb_par *) info->fb.par;
+		nb = info->var.yres * info->fix.line_length;
 
 		switch (when) {
 		case PBOOK_SLEEP_REQUEST:
@@ -1436,7 +1429,7 @@ static int aty_sleep_notify(struct pmu_sleep_notifier *self, int when)
 			if (par->blitter_may_be_busy)
 				wait_for_idle(par);
 			/* Stop accel engine (stop bus mastering) */
-			if (par->accel_flags & FB_ACCELF_TEXT)
+			if (info->accel_flags & FB_ACCELF_TEXT)
 				aty_reset_engine(par);
 
 			/* Backup fb content */
@@ -1841,14 +1834,6 @@ static int __init aty_init(struct fb_info *info, const char *name)
 			    (&var, info, mode_option, 8))
 				var = default_var;
 		} else {
-#ifdef CONFIG_NVRAM
-			if (default_vmode == VMODE_NVRAM) {
-				default_vmode = nvram_read_byte(NV_VMODE);
-				if (default_vmode <= 0
-				    || default_vmode > VMODE_MAX)
-					default_vmode = VMODE_CHOOSE;
-			}
-#endif
 			if (default_vmode == VMODE_CHOOSE) {
 				if (M64_HAS(G3_PB_1024x768))
 					/* G3 PowerBook with 1024x768 LCD */
@@ -1870,10 +1855,6 @@ static int __init aty_init(struct fb_info *info, const char *name)
 			if (default_vmode <= 0
 			    || default_vmode > VMODE_MAX)
 				default_vmode = VMODE_640_480_60;
-#ifdef CONFIG_NVRAM
-			if (default_cmode == CMODE_NVRAM)
-				default_cmode = nvram_read_byte(NV_CMODE);
-#endif
 			if (default_cmode < CMODE_8
 			    || default_cmode > CMODE_32)
 				default_cmode = CMODE_8;

drivers/video/aty128fb.c

@@ -56,8 +56,6 @@
 #include <asm/uaccess.h>
 #include <linux/fb.h>
 #include <linux/init.h>
-#include <linux/selection.h>
-#include <linux/console.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
@@ -65,10 +63,7 @@
 #ifdef CONFIG_ALL_PPC
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
-#include <video/macmodes.h>
-#ifdef CONFIG_NVRAM
-#include <linux/nvram.h>
-#endif
+#include "macmodes.h"
 #endif
 
 #ifdef CONFIG_ADB_PMU
@@ -285,7 +280,6 @@ struct aty128_constants {
 
 struct aty128_crtc {
 	u32 gen_cntl;
-	u32 ext_cntl;
 	u32 h_total, h_sync_strt_wid;
 	u32 v_total, v_sync_strt_wid;
 	u32 pitch;
@@ -326,10 +320,13 @@ struct aty128fb_par {
 	unsigned char *save_framebuffer;
 	int	pm_reg;
 	int crt_on, lcd_on;
+	struct pci_dev *pdev;
+	struct fb_info *next;
 #endif
-	unsigned char red[64];	/* see comments in aty128fb_setcolreg */
-	unsigned char green[64];
-	unsigned char blue[64];
+	u8	red[32];		/* see aty128fb_setcolreg */
+	u8	green[64];
+	u8	blue[32];
+	u32	pseudo_palette[16];	/* used for TRUECOLOR */
 };
 
 #ifdef CONFIG_PMAC_PBOOK
@@ -337,6 +334,7 @@ int aty128_sleep_notify(struct pmu_sleep_notifier *self, int when);
 static struct pmu_sleep_notifier aty128_sleep_notifier = {
 	aty128_sleep_notify, SLEEP_LEVEL_VIDEO,
 };
+static struct fb_info *aty128_fb = NULL;
 #endif
 
 #define round_div(n, d) ((n+(d/2))/d)
@@ -1203,6 +1201,10 @@ aty128fb_set_par(struct fb_info *info)
 { 
 	struct aty128fb_par *par = info->par;
 	u32 config;
+	int err;
+
+	if ((err = aty128_decode_var(&info->var, par)) != 0)
+		return err;
 
 	if (par->blitter_may_be_busy)
 		wait_for_idle(par);
@@ -1271,15 +1273,22 @@ static int
 aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par)
 {
 	int err;
+	struct aty128_crtc crtc;
+	struct aty128_pll pll;
+	struct aty128_ddafifo fifo_reg;
 
-	if ((err = aty128_var_to_crtc(var, &par->crtc, par)))
+	if ((err = aty128_var_to_crtc(var, &crtc, par)))
 		return err;
 
-	if ((err = aty128_var_to_pll(var->pixclock, &par->pll, par)))
+	if ((err = aty128_var_to_pll(var->pixclock, &pll, par)))
 		return err;
 
-	if ((err = aty128_ddafifo(&par->fifo_reg, &par->pll, par->crtc.depth, par)))
+	if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par)))
 		return err;
+
+	par->crtc = crtc;
+	par->pll = pll;
+	par->fifo_reg = fifo_reg;
 	par->accel_flags = var->accel_flags;
 
 	return 0;
@@ -1312,12 +1321,13 @@ aty128_encode_var(struct fb_var_screeninfo *var,
 static int
 aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
-	struct aty128fb_par *par = info->par;
+	struct aty128fb_par par;
 	int err;
 
-	if ((err = aty128_decode_var(var, par)) != 0)
+	par = *(struct aty128fb_par *)info->par;
+	if ((err = aty128_decode_var(var, &par)) != 0)
 		return err;
-	aty128_encode_var(var, par);
+	aty128_encode_var(var, &par);
 	return 0;
 }
 
@@ -1415,7 +1425,7 @@ aty128fb_setup(char *options)
 		}
 #endif
 #ifdef CONFIG_ALL_PPC
-		/* vmode and cmode depreciated */
+		/* vmode and cmode deprecated */
 		if (!strncmp(this_opt, "vmode:", 6)) {
 			unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0);
 			if (vmode > 0 && vmode <= VMODE_MAX)
@@ -1602,7 +1612,12 @@ aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 #endif /* CONFIG_PMAC_BACKLIGHT */
 #ifdef CONFIG_PMAC_PBOOK
 	par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	pmu_register_sleep_notifier(&aty128_sleep_notifier);
+	if (aty128_fb == NULL) {
+		/* XXX can only put one chip to sleep */
+		aty128_fb = info;
+	} else
+		printk(KERN_WARNING "aty128fb: can only sleep one Rage 128\n");
+	par->pdev = pdev;
 #endif
 
 	printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
@@ -1647,8 +1662,7 @@ aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* We have the resources. Now virtualize them */
-	size = sizeof(struct fb_info) + sizeof(struct aty128fb_par) +
-			 sizeof(u32)*16;
+	size = sizeof(struct fb_info) + sizeof(struct aty128fb_par);
 	if (!(info = kmalloc(size, GFP_ATOMIC))) {
 		printk(KERN_ERR "aty128fb: can't alloc fb_info_aty128\n");
 		goto err_unmap_out;
@@ -1656,9 +1670,7 @@ aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memset(info, 0, size);
 
 	par = (struct aty128fb_par *)(info + 1);
-	info->pseudo_palette = (void *) (par + 1);
-
-	memset(info, 0, sizeof(struct fb_info));
+	info->pseudo_palette = par->pseudo_palette;
 
 	info->par = par;
 	info->fix = aty128fb_fix;
@@ -1758,6 +1770,10 @@ static void __devexit aty128_remove(struct pci_dev *pdev)
 			   pci_resource_len(pdev, 1));
 	release_mem_region(pci_resource_start(pdev, 2),
 			   pci_resource_len(pdev, 2));
+#ifdef CONFIG_PMAC_PBOOK
+	if (info == aty128_fb)
+		aty128_fb = NULL;
+#endif
 	kfree(info);
 }
 #endif /* CONFIG_PCI */
@@ -2008,7 +2024,7 @@ aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		}
 	}
 
-	if (par->crtc.depth == 16) {
+	if (par->crtc.depth == 16 && regno > 0) {
 		/*
 		 * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we
 		 * have 32 slots for R and B values but 64 slots for G values.
@@ -2016,12 +2032,13 @@ aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		 * goes in a different slot, and we have to avoid disturbing
 		 * the other fields in the slots we touch.
 		 */
-		par->red[regno] = red;
 		par->green[regno] = green;
+		if (regno < 32) {
+			par->red[regno] = red;
 			par->blue[regno] = blue;
-		if (regno > 0 && regno < 32)
 			aty128_st_pal(regno * 8, red, par->green[regno*2],
 				      blue, par);
+		}
 		red = par->red[regno/2];
 		blue = par->blue[regno/2];
 		regno <<= 2;
@@ -2213,6 +2230,7 @@ aty128_set_suspend(struct aty128fb_par *par, int suspend)
 {
 	u32	pmgt;
 	u16	pwr_command;
+	struct pci_dev *pdev = par->pdev;
 
 	if (!par->pm_reg)
 		return;
@@ -2237,17 +2255,16 @@ aty128_set_suspend(struct aty128fb_par *par, int suspend)
 		aty_st_le32(BUS_CNTL1, 0x00000010);
 		aty_st_le32(MEM_POWER_MISC, 0x0c830000);
 		mdelay(100);
-		pci_read_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
 		/* Switch PCI power management to D2 */
-		pci_write_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL,
+		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
 			(pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
-		pci_read_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
 	} else {
 		/* Switch back PCI power management to D0 */
 		mdelay(100);
-		pci_write_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, 0);
-		mdelay(100);
-		pci_read_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
 		mdelay(100);
 	}
 }
@@ -2259,10 +2276,13 @@ aty128_set_suspend(struct aty128fb_par *par, int suspend)
 int
 aty128_sleep_notify(struct pmu_sleep_notifier *self, int when)
 {
- 	int result = PBOOK_SLEEP_OK, nb;
-	struct fb_info *info = info;	/* FIXME!!! How do find which framebuffer  */
-	struct aty128fb_par *par = info->par;
+ 	int nb;
+	struct fb_info *info = aty128_fb;
+	struct aty128fb_par *par;
 
+	if (info == NULL)
+		return PBOOK_SLEEP_OK;
+	par = info->par;
 	nb = info->var.yres * info->fix.line_length;
 
 	switch (when) {
@@ -2311,17 +2331,23 @@ aty128_sleep_notify(struct pmu_sleep_notifier *self, int when)
 		aty128fb_blank(0, info);
 		break;
 	}
-	return result;
+	return PBOOK_SLEEP_OK;
 }
 #endif /* CONFIG_PMAC_PBOOK */
 
 int __init aty128fb_init(void)
 {
+#ifdef CONFIG_PMAC_PBOOK
+	pmu_register_sleep_notifier(&aty128_sleep_notifier);
+#endif
 	return pci_module_init(&aty128fb_driver);
 }
 
 static void __exit aty128fb_exit(void)
 {
+#ifdef CONFIG_PMAC_PBOOK
+	pmu_unregister_sleep_notifier(&aty128_sleep_notifier);
+#endif
 	pci_unregister_driver(&aty128fb_driver);
 }
 

drivers/video/cfbimgblt.c

@@ -102,11 +102,10 @@ static inline void color_imageblit(struct fb_image *image, struct fb_info *p, u8
 				   unsigned long start_index, unsigned long pitch_index)
 {
 	/* Draw the penguin */
-	int i, n;
-	unsigned long bitmask = SHIFT_LOW(~0UL, BITS_PER_LONG - p->var.bits_per_pixel);
-	unsigned long *palette = (unsigned long *) p->pseudo_palette;
 	unsigned long *dst, *dst2, color = 0, val, shift;
-	unsigned long null_bits = BITS_PER_LONG - p->var.bits_per_pixel; 
+	int i, n, bpp = p->var.bits_per_pixel;
+	unsigned long null_bits = BITS_PER_LONG - bpp;
+	u32 *palette = (u32 *) p->pseudo_palette;
 	u8 *src = image->data;
 
 	dst2 = (unsigned long *) dst1;
@@ -125,9 +124,10 @@ static inline void color_imageblit(struct fb_image *image, struct fb_info *p, u8
 		while (n--) {
 			if (p->fix.visual == FB_VISUAL_TRUECOLOR ||
 			    p->fix.visual == FB_VISUAL_DIRECTCOLOR )
-				color = palette[*src] & bitmask;
+				color = palette[*src];
 			else
-				color = *src & bitmask;	
+				color = *src;
+			color <<= LEFT_POS(bpp);
 			val |= SHIFT_HIGH(color, shift);
 			if (shift >= null_bits) {
 				FB_WRITEL(val, dst++);
@@ -136,7 +136,7 @@ static inline void color_imageblit(struct fb_image *image, struct fb_info *p, u8
 				else
 					val = SHIFT_LOW(color, BITS_PER_LONG - shift);
 			}
-			shift += p->var.bits_per_pixel;
+			shift += bpp;
 			shift &= (BITS_PER_LONG - 1);
 			src++;
 		}
@@ -188,6 +188,7 @@ static inline void slow_imageblit(struct fb_image *image, struct fb_info *p, u8
 				color = fgcolor;
 			else 
 				color = bgcolor;
+			color <<= LEFT_POS(bpp);
 			val |= SHIFT_HIGH(color, shift);
 			
 			/* Did the bitshift spill bits to the next long? */

drivers/video/console/Kconfig

@@ -66,13 +66,30 @@ config SGI_NEWPORT_CONSOLE
 
 #  bool 'IODC console' CONFIG_IODC_CONSOLE
 config STI_CONSOLE
-        bool "STI console"
+        bool "STI text console"
         depends on PARISC
+        default y
 	help
           The STI console is the builtin display/keyboard on HP-PARISC
           machines.  Say Y here to build support for it into your kernel.
           The alternative is to use your primary serial port as a console.
 
+config DUMMY_CONSOLE_COLUMNS
+        int "Initial number of STI console screen columns" if STI_CONSOLE
+        depends on STI_CONSOLE || FB_STI
+        default "160"
+        help
+          The default value is 160, which should fit a 1280x1024 monitor.
+          Select 80 if you use a 640x480 resolution by default.
+
+config DUMMY_CONSOLE_ROWS
+        int "Initial number of STI console screen rows" if STI_CONSOLE
+        depends on STI_CONSOLE || FB_STI
+        default "64"
+        help
+          The default value is 64, which should fit a 1280x1024 monitor.
+          Select 25 if you use a 640x480 resolution by default.
+
 config PROM_CONSOLE
 	bool "PROM console"
 	depends on SPARC32 || SPARC64
@@ -120,19 +137,6 @@ config FBCON_ADVANCED
 	  If unsure, say N.
 
 # Guess what we need
-config FBCON_STI
-	tristate
-	depends on !FBCON_ADVANCED && FRAMEBUFFER_CONSOLE && FB_STI
-	default y
-
-config FONTWIDTH8_ONLY
-	bool "Support only 8 pixels wide fonts"
-	depends on FRAMEBUFFER_CONSOLE
-	help
-	  Answer Y here will make the kernel provide only the 8x8 fonts (these
-	  are the less readable).
-
-	  If unsure, say N.
 
 config FONT_SUN8x16
 	bool "Sparc console 8x16 font"
@@ -142,7 +146,7 @@ config FONT_SUN8x16
 
 config FONT_SUN12x22
 	bool "Sparc console 12x22 font (not supported by all drivers)"
-	depends on FRAMEBUFFER_CONSOLE && !FONTWIDTH8_ONLY && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+	depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
 	help
 	  This is the high resolution console font for Sun machines with very
 	  big letters (like the letters used in the SPARC PROM). If the
@@ -191,7 +195,7 @@ config FONT_8x16
 
 config FONT_6x11
 	bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
-	depends on FRAMEBUFFER_CONSOLE && !FONTWIDTH8_ONLY
+	depends on FRAMEBUFFER_CONSOLE
 	default y if !SPARC32 && !SPARC64 && !FONTS && MAC
 	help
 	  Small console font with Macintosh-style high-half glyphs.  Some Mac

drivers/video/console/Makefile

@@ -45,9 +45,7 @@ obj-$(CONFIG_VGA_CONSOLE)         += vgacon.o
 obj-$(CONFIG_MDA_CONSOLE)         += mdacon.o
 obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o font.o
 
-# Generic Low Level Drivers
-
-obj-$(CONFIG_FBCON_STI)           += fbcon-sti.o
+obj-$(CONFIG_FB_STI)              += sticore.o
 
 # Files generated that shall be removed upon make clean
 clean-files := promcon_tbl.c

drivers/video/console/dummycon.c

@@ -20,8 +20,10 @@
 #define DUMMY_COLUMNS	ORIG_VIDEO_COLS
 #define DUMMY_ROWS	ORIG_VIDEO_LINES
 #elif defined(__hppa__)
-#define DUMMY_COLUMNS	80	/* fixme ! (mine uses 160x64 at 1280x1024) */
-#define DUMMY_ROWS	25
+/* set by Kconfig. Use 80x25 for 640x480 and 160x64 for 1280x1024 */
+#include <linux/config.h>
+#define DUMMY_COLUMNS	CONFIG_DUMMY_CONSOLE_COLUMNS
+#define DUMMY_ROWS	CONFIG_DUMMY_CONSOLE_ROWS
 #else
 #define DUMMY_COLUMNS	80
 #define DUMMY_ROWS	25

drivers/video/console/fbcon-sti.c

-/*
- * linux/drivers/video/fbcon-sti.c -- Low level frame buffer
- *  	operations for generic HP video boards using STI (standard
- *  	text interface) firmware
- *
- *  Based on linux/drivers/video/fbcon-artist.c
- *	Created 5 Apr 1997 by Geert Uytterhoeven
- *	Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.  */
-
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/string.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <asm/gsc.h>		/* for gsc_read/write */
-#include <asm/types.h>
-
-#include <video/fbcon.h>
-#include <video/fbcon-mfb.h>
-
-#include "../sticore.h"
-
-static inline u32
-ram2log(void * addr)
-{
-	return (unsigned long) addr;
-}
-
-/* All those functions need better names. */
-
-static void
-memcpy_fromhp_tohp(void *dest, void *src, int count)
-{
-	unsigned long d = ram2log(dest);
-	unsigned long s = ram2log(src);
-
-	count += 3;
-	count &= ~3; /* XXX */
-
-	while(count) {
-		count --;
-		gsc_writel(~gsc_readl(s), d);
-		d += 32*4;
-		s += 32*4;
-	}
-}
-
-
-static void
-memset_tohp(void *dest, u32 word, int count)
-{
-	unsigned long d = ram2log(dest);
-
-	count += 3;
-	count &= ~3;
-
-	while(count) {
-		count--;
-		gsc_writel(word, d);
-		d += 32;
-	}
-}
-
-static u8
-readb_hp(void *src)
-{
-	unsigned long s = ram2log(src);
-
-	return ~gsc_readb(s);
-}
-
-static void
-writeb_hp(u8 b, void *dst)
-{
-	unsigned long d = ram2log(dst);
-
-	if((d&0xf0000000) != 0xf0000000) {
-		printk("writeb_hp %02x %p (%08lx) (%p)\n",
-			b, dst, d, __builtin_return_address(0));
-		return;
-	}
-
-	gsc_writeb(b, d);
-}
-
-static void
-fbcon_sti_setup(struct display *p)
-{
-	/* in kernel 2.5 the value of sadly line_length disapeared */
-	if (p->var.xres_virtual /*line_length*/)
-		p->next_line = p->var.xres_virtual>>3;
-	else
-		p->next_line = 2048; /* default STI value */
-	p->next_plane = 0;
-}
-
-static void
-fbcon_sti_bmove(struct display *p, int sy, int sx,
-		int dy, int dx,
-		int height, int width)
-{
-#if 0 /* Unfortunately, still broken */
-	sti_bmove(default_sti /* FIXME */, sy, sx, dy, dx, height, width);
-#else
-	u8 *src, *dest;
-	u_int rows;
-
-	if (sx == 0 && dx == 0 && width == p->next_line) {
-		src = p->fb_info->screen_base+sy*fontheight(p)*width;
-		dest = p->fb_info->screen_base+dy*fontheight(p)*width;
-		memcpy_fromhp_tohp(dest, src, height*fontheight(p)*width);
-	} else if (dy <= sy) {
-		src = p->fb_info->screen_base+sy*fontheight(p)*p->next_line+sx;
-		dest = p->fb_info->screen_base+dy*fontheight(p)*p->next_line+dx;
-		for (rows = height*fontheight(p); rows--;) {
-			memcpy_fromhp_tohp(dest, src, width);
-			src += p->next_line;
-			dest += p->next_line;
-		}
-	} else {
-		src = p->fb_info->screen_base+((sy+height)*fontheight(p)-1)*p->next_line+sx;
-		dest = p->fb_info->screen_base+((dy+height)*fontheight(p)-1)*p->next_line+dx;
-		for (rows = height*fontheight(p); rows--;) {
-			memcpy_fromhp_tohp(dest, src, width);
-			src -= p->next_line;
-			dest -= p->next_line;
-		}
-	}
-#endif
-}
-
-static void
-fbcon_sti_clear(struct vc_data *conp,
-		struct display *p, int sy, int sx,
-		int height, int width)
-{
-	u8 *dest;
-	u_int rows;
-	int inverse = conp ? attr_reverse(p,conp->vc_video_erase_char) : 0;
-
-	dest = p->fb_info->screen_base+sy*fontheight(p)*p->next_line+sx;
-
-	if (sx == 0 && width == p->next_line) {
-		if (inverse)
-			memset_tohp(dest, ~0, height*fontheight(p)*width);
-		else
-			memset_tohp(dest,  0, height*fontheight(p)*width);
-	} else
-		for (rows = height*fontheight(p); rows--; dest += p->next_line)
-			if (inverse)
-				memset_tohp(dest, 0xffffffff, width);
-			else
-				memset_tohp(dest, 0x00000000, width);
-}
-
-static void fbcon_sti_putc(struct vc_data *conp,
-			   struct display *p, int c,
-			   int yy, int xx)
-{
-	u8 *dest, *cdat;
-	u_int rows, bold, revs, underl;
-	u8 d;
-
-	dest = p->fb_info->screen_base+yy*fontheight(p)*p->next_line+xx;
-	cdat = p->fontdata+(c&p->charmask)*fontheight(p);
-	bold = attr_bold(p,c);
-	revs = attr_reverse(p,c);
-	underl = attr_underline(p,c);
-
-	for (rows = fontheight(p); rows--; dest += p->next_line) {
-		d = *cdat++;
-		if (underl && !rows)
-			d = 0xff;
-		else if (bold)
-			d |= d>>1;
-		if (revs)
-			d = ~d;
-		writeb_hp (d, dest);
-	}
-}
-
-static void fbcon_sti_putcs(struct vc_data *conp,
-			    struct display *p, 
-			    const unsigned short *s,
-			    int count, int yy, int xx)
-{
-	u8 *dest, *dest0, *cdat;
-	u_int rows, bold, revs, underl;
-	u8 d;
-	u16 c;
-
-	if(((unsigned)xx > 200) || ((unsigned) yy > 200)) {
-		printk("refusing to putcs %p %p %p %d %d %d (%p)\n",
-			conp, p, s, count, yy, xx, __builtin_return_address(0));
-		return;
-	}	
-
-
-	dest0 = p->fb_info->screen_base+yy*fontheight(p)*p->next_line+xx;
-	if(((u32)dest0&0xf0000000)!=0xf0000000) {
-		printk("refusing to putcs %p %p %p %d %d %d (%p) %p = %p + %d * %d * %ld + %d\n",
-			conp, p, s, count, yy, xx, __builtin_return_address(0),
-			dest0, p->fb_info->screen_base, yy, fontheight(p), p->next_line,
-			xx);
-		return;
-	}	
-
-	c = scr_readw(s);
-	bold = attr_bold(p, c);
-	revs = attr_reverse(p, c);
-	underl = attr_underline(p, c);
-
-	while (count--) {
-		c = scr_readw(s++) & p->charmask;
-		dest = dest0++;
-		cdat = p->fontdata+c*fontheight(p);
-		for (rows = fontheight(p); rows--; dest += p->next_line) {
-			d = *cdat++;
-			if (0 && underl && !rows)
-				d = 0xff;
-			else if (0 && bold)
-				d |= d>>1;
-			if (revs)
-				d = ~d;
-			writeb_hp (d, dest);
-		}
-	}
-}
-
-static void fbcon_sti_revc(struct display *p,
-			   int xx, int yy)
-{
-	u8 *dest, d;
-	u_int rows;
-
-	dest = p->fb_info->screen_base+yy*fontheight(p)*p->next_line+xx;
-	for (rows = fontheight(p); rows--; dest += p->next_line) {
-		d = readb_hp(dest);
-		writeb_hp (~d, dest);
-	}
-}
-
-static void
-fbcon_sti_clear_margins(struct vc_data *conp,
-			struct display *p,
-			int bottom_only)
-{
-	u8 *dest;
-	int height, bottom;
-	int inverse = conp ? attr_reverse(p,conp->vc_video_erase_char) : 0;
-
-
-	/* XXX Need to handle right margin? */
-
-	height = p->var.yres - conp->vc_rows * fontheight(p);
-	if (!height)
-		return;
-	bottom = conp->vc_rows + p->yscroll;
-	if (bottom >= p->vrows)
-		bottom -= p->vrows;
-	dest = p->fb_info->screen_base + bottom * fontheight(p) * p->next_line;
-	if (inverse)
-		memset_tohp(dest, 0xffffffff, height * p->next_line);
-	else
-		memset_tohp(dest, 0x00000000, height * p->next_line);
-}
-
-
-    /*
-     *  `switch' for the low level operations
-     */
-
-struct display_switch fbcon_sti = {
-	.setup =	fbcon_sti_setup, 
-	.bmove =	fbcon_sti_bmove, 
-	.clear =	fbcon_sti_clear,
-	.putc =		fbcon_sti_putc, 
-	.putcs =	fbcon_sti_putcs, 
-	.revc =		fbcon_sti_revc,
-	.clear_margins =fbcon_sti_clear_margins,
-	.fontwidthmask =FONTWIDTH(8)
-};
-
-MODULE_LICENSE("GPL");

drivers/video/console/fbcon.h

@@ -51,28 +51,11 @@ extern struct display fb_display[MAX_NR_CONSOLES];
 extern char con2fb_map[MAX_NR_CONSOLES];
 extern void set_con2fb_map(int unit, int newidx);
 
-#define fontheight(p) ((p)->_fontheight)
-
-#ifdef CONFIG_FONTWIDTH8_ONLY
-
-/* fontwidth w is supported by dispsw */
-#define FONTWIDTH(w)	(1 << ((8) - 1))
-/* fontwidths w1-w2 inclusive are supported by dispsw */
-#define FONTWIDTHRANGE(w1,w2)	FONTWIDTH(8)
-
-#define fontwidth(p) (8)
-
-#else
-
 /* fontwidth w is supported by dispsw */
 #define FONTWIDTH(w)	(1 << ((w) - 1))
 /* fontwidths w1-w2 inclusive are supported by dispsw */
 #define FONTWIDTHRANGE(w1,w2)	(FONTWIDTH(w2+1) - FONTWIDTH(w1))
 
-#define fontwidth(p) ((p)->_fontwidth)
-
-#endif
-
     /*
      *  Attribute Decoding
      */

drivers/video/console/mdacon.c

@@ -74,7 +74,7 @@ static char *mda_type_name;
 
 /* console information */
 
-static int	mda_first_vc = 13;
+static int	mda_first_vc = 1;
 static int	mda_last_vc  = 16;
 
 static struct vc_data	*mda_display_fg = NULL;
@@ -604,28 +604,22 @@ const struct consw mda_con = {
 	.con_invert_region =	mdacon_invert_region,
 };
 
-void __init mda_console_init(void)
+int __init mda_console_init(void)
 {
 	if (mda_first_vc > mda_last_vc)
-		return;
+		return 1;
 
 	take_over_console(&mda_con, mda_first_vc-1, mda_last_vc-1, 0);
-}
-
-#ifdef MODULE
-
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
-	mda_console_init();
-
 	return 0;
 }
 
-void cleanup_module(void)
+void __exit mda_console_exit(void)
 {
 	give_up_console(&mda_con);
 }
 
-#endif
+module_init(mda_console_init);
+module_exit(mda_console_exit);
+
+MODULE_LICENSE("GPL");
+

drivers/video/console/sti.h

-#define STI_REGION_MAX 8
-#define STI_DEV_NAME_LENGTH 32
-
-struct sti_rom_font {
-	u16 first_char;
-	u16 last_char;
-	 u8 width;
-	 u8 height;
-	 u8 font_type;
-	 u8 bytes_per_char;
-	u32 next_font;
-	 u8 underline_height;
-	 u8 underline_pos;
-	 u8 res008[2];
-};
-
-struct sti_rom {
-	 u8 type[4];
-	 u8 res004;
-	 u8 num_mons;
-	 u8 revno[2];
-	 u8 graphics_id[8];
-
-	u32 font_start;
-	u32 statesize;
-	u32 last_addr;
-	u32 region_list;
-
-	u16 reentsize;
-	u16 maxtime;
-	u32 mon_tbl_addr;
-	u32 user_data_addr;
-	u32 sti_mem_req;
-
-	u32 user_data_size;
-	u16 power;
-	 u8 bus_support;
-	 u8 ext_bus_support;
-	 u8 alt_code_type;
-	 u8 ext_dd_struct[3];
-	u32 cfb_addr;
-	
-	u32 init_graph;
-	u32 state_mgmt;
-	u32 font_unpmv;
-	u32 block_move;
-	u32 self_test;
-	u32 excep_hdlr;
-	u32 inq_conf;
-	u32 set_cm_entry;
-	u32 dma_ctrl;
-	 u8 res040[7 * 4];
-	
-	u32 init_graph_m68k;
-	u32 flow_ctrl;
-	u32 user_timing;
-	u32 process_mgr;
-	u32 sti_util;
-	u32 end_addr;
-	u32 res0b8;
-	u32 res0bc;
-};
-	
-struct sti_cooked_font {
-	struct sti_rom_font *raw;
-	struct sti_cooked_font *next_font;
-};
-
-struct sti_cooked_rom {
-	struct sti_rom *raw;
-	struct sti_cooked_font *font_start;
-	u32 *region_list;
-};
-
-struct sti_glob_cfg_ext {
-	u8  curr_mon;
-	u8  friendly_boot;
-	s16 power;
-	s32 freq_ref;
-	s32 *sti_mem_addr;
-	s32 *future_ptr;
-};
-
-struct sti_glob_cfg {
-	s32 text_planes;
-	s16 onscreen_x;
-	s16 onscreen_y;
-	s16 offscreen_x;
-	s16 offscreen_y;
-	s16 total_x;
-	s16 total_y;
-	u32 region_ptrs[STI_REGION_MAX];
-	s32 reent_lvl;
-	s32 *save_addr;
-	struct sti_glob_cfg_ext *ext_ptr;
-};
-
-struct sti_init_flags {
-	u32 wait : 1;
-	u32 reset : 1;
-	u32 text : 1;
-	u32 nontext : 1;
-	u32 clear : 1;
-	u32 cmap_blk : 1;
-	u32 enable_be_timer : 1;
-	u32 enable_be_int : 1;
-	u32 no_chg_tx : 1;
-	u32 no_chg_ntx : 1;
-	u32 no_chg_bet : 1;
-	u32 no_chg_bei : 1;
-	u32 init_cmap_tx : 1;
-	u32 cmt_chg : 1;
-	u32 retain_ie : 1;
-	u32 pad : 17;
-
-	s32 *future_ptr;
-};
-
-struct sti_init_inptr_ext {
-	u8  config_mon_type;
-	u8  pad[1];
-	u16 inflight_data;
-	s32 *future_ptr;
-};
-
-struct sti_init_inptr {
-	s32 text_planes;
-	struct sti_init_inptr_ext *ext_ptr;
-};
-
-struct sti_init_outptr {
-	s32 errno;
-	s32 text_planes;
-	s32 *future_ptr;
-};
-
-struct sti_conf_flags {
-	u32 wait : 1;
-	u32 pad : 31;
-	s32 *future_ptr;
-};
-
-struct sti_conf_inptr {
-	s32 *future_ptr;
-};
-
-struct sti_conf_outptr_ext {
-	u32 crt_config[3];
-	u32 crt_hdw[3];
-	s32 *future_ptr;
-};
-
-struct sti_conf_outptr {
-	s32 errno;
-	s16 onscreen_x;
-	s16 onscreen_y;
-	s16 offscreen_x;
-	s16 offscreen_y;
-	s16 total_x;
-	s16 total_y;
-	s32 bits_per_pixel;
-	s32 bits_used;
-	s32 planes;
-	 u8 dev_name[STI_DEV_NAME_LENGTH];
-	u32 attributes;
-	struct sti_conf_outptr_ext *ext_ptr;
-};
-
-
-struct sti_font_inptr {
-	u32 font_start_addr;
-	s16 index;
-	u8 fg_color;
-	u8 bg_color;
-	s16 dest_x;
-	s16 dest_y;
-	s32 *future_ptr;
-};
-
-struct sti_font_flags {
-	u32 wait : 1;
-	u32 non_text : 1;
-	u32 pad : 30;
-
-	s32 *future_ptr;
-};
-	
-struct sti_font_outptr {
-	s32 errno;
-	s32 *future_ptr;
-};
-
-struct sti_blkmv_flags {
-	u32 wait : 1;
-	u32 color : 1;
-	u32 clear : 1;
-	u32 non_text : 1;
-	u32 pad : 28;
-	s32 *future_ptr;
-};
-
-struct sti_blkmv_inptr {
-	u8 fg_color;
-	u8 bg_color;
-	s16 src_x;
-	s16 src_y;
-	s16 dest_x;
-	s16 dest_y;
-	s16 width;
-	s16 height;
-	s32 *future_ptr;
-};
-
-struct sti_blkmv_outptr {
-	s32 errno;
-	s32 *future_ptr;
-};
-
-struct sti_struct {
-	spinlock_t lock;
-
-	struct sti_cooked_rom *rom;
-
-	unsigned long font_unpmv;
-	unsigned long block_move;
-	unsigned long init_graph;
-	unsigned long inq_conf;
-
-	struct sti_glob_cfg *glob_cfg;
-	struct sti_rom_font *font;
-
-	s32 text_planes;
-
-	char **mon_strings;
-	u32 *regions;
-	 u8 *pci_regions;
-};
-
-#define STI_CALL(func, flags, inptr, outptr, glob_cfg) \
-	({							\
-		real32_call( func, (unsigned long)STI_PTR(flags), \
-				    STI_PTR(inptr), STI_PTR(outptr), \
-				    glob_cfg); \
-	})
-
-/* The latency of the STI functions cannot really be reduced by setting
- * this to 0;  STI doesn't seem to be designed to allow calling a different
- * function (or the same function with different arguments) after a
- * function exited with 1 as return value.
- *
- * As all of the functions below could be called from interrupt context,
- * we have to spin_lock_irqsave around the do { ret = bla(); } while(ret==1)
- * block.  Really bad latency there.
- *
- * Probably the best solution to all this is have the generic code manage
- * the screen buffer and a kernel thread to call STI occasionally.
- * 
- * Luckily, the frame buffer guys have the same problem so we can just wait
- * for them to fix it and steal their solution.   prumpf
- *
- * Actually, another long-term viable solution is to completely do STI
- * support in userspace - that way we avoid the potential license issues
- * of using proprietary fonts, too. */
- 
-#define STI_WAIT 1
-#define STI_PTR(p) ( (typeof(p)) virt_to_phys(p))
-#define PTR_STI(p) ( (typeof(p)) phys_to_virt((unsigned long)p) )
-
-#define sti_onscreen_x(sti) (PTR_STI(sti->glob_cfg)->onscreen_x)
-#define sti_onscreen_y(sti) (PTR_STI(sti->glob_cfg)->onscreen_y)
-#define sti_font_x(sti) (PTR_STI(sti->font)->width)
-#define sti_font_y(sti) (PTR_STI(sti->font)->height)
-
-extern struct sti_struct * sti_init_roms(void);
-
-void sti_init_graph(struct sti_struct *sti);
-void sti_inq_conf(struct sti_struct *sti);
-void sti_putc(struct sti_struct *sti, int c, int y, int x);
-void sti_set(struct sti_struct *sti, int src_y, int src_x,
-	     int height, int width, u8 color);
-void sti_clear(struct sti_struct *sti, int src_y, int src_x,
-	       int height, int width);
-void sti_bmove(struct sti_struct *sti, int src_y, int src_x,
-	       int dst_y, int dst_x, int height, int width);
-
-/* XXX: this probably should not be here, but we rely on STI being
-   initialized early and independently of stifb at the moment, so
-   there's no other way for stifb to find it. */
-extern struct sti_struct default_sti;

drivers/video/controlfb.c

@@ -22,6 +22,10 @@
  *    control.c: Console support for PowerMac "control" display adaptor.
  *    Copyright (C) 1996 Paul Mackerras
  *
+ *  Updated to 2.5 framebuffer API by Ben Herrenschmidt
+ *  <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>,
+ *  and James Simmons <jsimmons@infradead.org>.
+ *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
  *  more details.
@@ -50,12 +54,7 @@
 #include <asm/pgtable.h>
 #include <asm/btext.h>
 
-#include <video/fbcon.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
-#include <video/fbcon-cfb32.h>
-#include <video/macmodes.h>
-
+#include "macmodes.h"
 #include "controlfb.h"
 
 struct fb_par_control {
@@ -97,7 +96,6 @@ static inline int VAR_MATCH(struct fb_var_screeninfo *x, struct fb_var_screeninf
 
 struct fb_info_control {
 	struct fb_info		info;
-	struct display		display; /* Will disappear */
 	struct fb_par_control	par;
 	u32			pseudo_palette[17];
 		
@@ -119,14 +117,14 @@ struct fb_info_control {
 };
 
 /* control register access macro */
-#define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs-> ## REG).r))
+#define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs->REG).r))
 
 
 /******************** Prototypes for exported functions ********************/
 /*
  * struct fb_ops
  */
-static int controlfb_pan_display(struct fb_var_screeninfo *var, int con,
+static int controlfb_pan_display(struct fb_var_screeninfo *var,
 	struct fb_info *info);
 static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	u_int transp, struct fb_info *info);
@@ -171,11 +169,8 @@ static int default_cmode __initdata = CMODE_NVRAM;
 
 static struct fb_ops controlfb_ops = {
 	.owner		= THIS_MODULE,
-	.fb_set_var	= gen_set_var,
 	.fb_check_var	= controlfb_check_var,
 	.fb_set_par	= controlfb_set_par,
-	.fb_get_cmap	= gen_get_cmap,
-	.fb_set_cmap	= gen_set_cmap,
 	.fb_setcolreg	= controlfb_setcolreg,
 	.fb_pan_display = controlfb_pan_display,
 	.fb_blank	= controlfb_blank,
@@ -265,7 +260,7 @@ static inline void set_screen_start(int xoffset, int yoffset,
 }
 
 
-static int controlfb_pan_display(struct fb_var_screeninfo *var, int con,
+static int controlfb_pan_display(struct fb_var_screeninfo *var,
 				 struct fb_info *info)
 {
 	unsigned int xoffset, hstep;
@@ -483,7 +478,7 @@ static int __init init_control(struct fb_info_control *p)
 	/* Apply default var */
 	p->info.var = var;
 	var.activate = FB_ACTIVATE_NOW;
-	rc = gen_set_var(&var, -1, &p->info);
+	rc = fb_set_var(&var, &p->info);
 	if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8))
 		goto try_again;
 
@@ -491,7 +486,7 @@ static int __init init_control(struct fb_info_control *p)
 	if (register_framebuffer(&p->info) < 0)
 		return -ENXIO;
 	
-	printk(KERN_INFO "fb%d: control display adapter\n", GET_FB_IDX(p->info.node));	
+	printk(KERN_INFO "fb%d: control display adapter\n", minor(p->info.node));	
 
 	return 0;
 }
@@ -1015,22 +1010,12 @@ static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeni
 static void __init control_init_info(struct fb_info *info, struct fb_info_control *p)
 {
 	/* Fill fb_info */
-	strcpy(info->modename, "control");
-	info->currcon = -1;
 	info->par = &p->par;
 	info->node = NODEV;
 	info->fbops = &controlfb_ops;
-	info->disp = &p->display;
 	info->pseudo_palette = p->pseudo_palette;
         info->flags = FBINFO_FLAG_DEFAULT;
-        strncpy (info->fontname, fontname, sizeof (info->fontname));
-        info->fontname[sizeof (info->fontname) - 1] = 0;
-	info->changevar = NULL;
-        info->display_fg = NULL;
 	info->screen_base = (char *) p->frame_buffer + CTRLFB_OFF;
-	info->changevar  = NULL;
-	info->switch_con = gen_switch;
-	info->updatevar  = gen_update_var;
 
 	fb_alloc_cmap(&info->cmap, 256, 0);
 

drivers/video/i810/Makefile

+#
+# Makefile for the Intel 810/815 framebuffer driver
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+# Note 2! The CFLAGS definitions are now in the main makefile...
+
+
+obj-$(CONFIG_FB_I810)		+= i810fb.o
+
+
+i810fb-objs                     := i810_main.o i810_accel.o
+
+ifdef CONFIG_FB_I810_GTF
+i810fb-objs                     += i810_gtf.o
+else
+i810fb-objs                     += i810_dvt.o
+endif
+
+include $(TOPDIR)/Rules.make

drivers/video/offb.c

@@ -393,6 +393,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 	struct fb_fix_screeninfo *fix;
 	struct fb_var_screeninfo *var;
 	struct fb_info *info;
+	int size;
 
 	if (!request_mem_region(res_start, res_size, "offb"))
 		return;
@@ -421,7 +422,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 	var = &info->var;
 
 	strcpy(fix->id, "OFfb ");
-	strncat(fix->id, name, sizeof(fix->id));
+	strncat(fix->id, name, sizeof(fix->id) - sizeof("OFfb "));
 	fix->id[sizeof(fix->id) - 1] = '\0';
 
 	var->xres = var->xres_virtual = width;
@@ -522,8 +523,6 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 	var->sync = 0;
 	var->vmode = FB_VMODE_NONINTERLACED;
 
-	strcpy(fix->id, "OFfb ");
-	strncat(fix->id, full_name, sizeof(fix->id));
 	info->node = NODEV;
 	info->fbops = &offb_ops;
 	info->screen_base = ioremap(address, fix->smem_len);

drivers/video/riva/rivafb.h

@@ -41,9 +41,16 @@ struct riva_par {
 	u32 riva_palette[16];
 	u32 cursor_data[32 * 32/4];
 	int cursor_reset;
+	unsigned char *EDID;
+	unsigned int Chipset;
+	int forceCRTC;
+	Bool SecondCRTC;
+	int FlatPanel;
 #ifdef CONFIG_MTRR
 	struct { int vram; int vram_valid; } mtrr;
 #endif
 };
 
+void riva_common_setup(struct riva_par *);
+
 #endif /* __RIVAFB_H */