Merge ssh://mulgrave-w/BK/scsi-misc-2.5

into raven.il.steeleye.com:/home/jejb/BK/scsi-for-linus-2.5

drivers/acorn/scsi/acornscsi.c

@@ -2935,9 +2935,9 @@ int acornscsi_proc_info(char *buffer, char **start, off_t offset,
 	}
     }
 
-    p += sprintf(p, "\nAttached devices:%s\n", instance->host_queue ? "" : " none");
+    p += sprintf(p, "\nAttached devices:\n");
 
-    for (scd = instance->host_queue; scd; scd = scd->next) {
+    list_for_each_entry(scd, &instance->my_devices, siblings) {
 	int len;
 
 	proc_print_scsidevice(scd, p, &len, 0);

drivers/acorn/scsi/arxescsi.c

@@ -311,7 +311,7 @@ int arxescsi_proc_info(char *buffer, char **start, off_t offset,
 
 	pos += sprintf (buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		pos += fas216_print_device(&info->info, scd, buffer + pos);
 
 		if (pos + begin < offset) {

drivers/acorn/scsi/cumana_2.c

@@ -387,7 +387,7 @@ int cumanascsi_2_proc_info (char *buffer, char **start, off_t offset,
 
 	pos += sprintf(buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		int len;
 
 		proc_print_scsidevice(scd, buffer, &len, pos);

drivers/acorn/scsi/eesox.c

@@ -390,7 +390,7 @@ int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
 
 	pos += sprintf(buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		int len;
 
 		proc_print_scsidevice(scd, buffer, &len, pos);

drivers/acorn/scsi/fas216.c

@@ -2631,7 +2631,7 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt)
 	 * all command structures.  Leave the running
 	 * command in place.
 	 */
-	for (SDpnt = info->host->host_queue; SDpnt; SDpnt = SDpnt->next) {
+	list_for_each_entry(SDpnt, &info->host->my_devices, siblings) {
 		int i;
 
 		if (SDpnt->soft_reset)

drivers/acorn/scsi/powertec.c

@@ -269,7 +269,7 @@ int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
 
 	pos += sprintf(buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		pos += fas216_print_device(&info->info, scd, buffer + pos);
 
 		if (pos + begin < offset) {

drivers/char/tty_io.c

@@ -372,6 +372,8 @@ int tty_check_change(struct tty_struct * tty)
 	return -ERESTARTSYS;
 }
 
+EXPORT_SYMBOL(tty_check_change);
+
 static ssize_t hung_up_tty_read(struct file * file, char * buf,
 				size_t count, loff_t *ppos)
 {
@@ -540,6 +542,8 @@ void tty_hangup(struct tty_struct * tty)
 	schedule_work(&tty->hangup_work);
 }
 
+EXPORT_SYMBOL(tty_hangup);
+
 void tty_vhangup(struct tty_struct * tty)
 {
 #ifdef TTY_DEBUG_HANGUP
@@ -556,6 +560,8 @@ int tty_hung_up_p(struct file * filp)
 	return (filp->f_op == &hung_up_tty_fops);
 }
 
+EXPORT_SYMBOL(tty_hung_up_p);
+
 /*
  * This function is typically called only by the session leader, when
  * it wants to disassociate itself from its controlling tty.
@@ -1886,6 +1892,8 @@ void do_SAK(struct tty_struct *tty)
 	schedule_work(&tty->SAK_work);
 }
 
+EXPORT_SYMBOL(do_SAK);
+
 /*
  * This routine is called out of the software interrupt to flush data
  * from the flip buffer to the line discipline.
@@ -1946,34 +1954,44 @@ static int baud_table[] = {
 #endif
 };
 
-static int n_baud_table = sizeof(baud_table)/sizeof(int);
+static int n_baud_table = ARRAY_SIZE(baud_table);
 
-int tty_get_baud_rate(struct tty_struct *tty)
+int tty_termios_baud_rate(struct termios *termios)
 {
-	unsigned int cflag, i;
+	unsigned int cbaud = termios->c_cflag & CBAUD;
 
-	cflag = tty->termios->c_cflag;
+	if (cbaud & CBAUDEX) {
+		cbaud &= ~CBAUDEX;
 
-	i = cflag & CBAUD;
-	if (i & CBAUDEX) {
-		i &= ~CBAUDEX;
-		if (i < 1 || i+15 >= n_baud_table) 
-			tty->termios->c_cflag &= ~CBAUDEX;
+		if (cbaud < 1 || cbaud + 15 > n_baud_table)
+			termios->c_cflag &= ~CBAUDEX;
 		else
-			i += 15;
+			cbaud += 15;
 	}
-	if (i==15 && tty->alt_speed) {
+
+	return baud_table[cbaud];
+}
+
+EXPORT_SYMBOL(tty_termios_baud_rate);
+
+int tty_get_baud_rate(struct tty_struct *tty)
+{
+	int baud = tty_termios_baud_rate(tty->termios);
+
+	if (baud == 38400 && tty->alt_speed) {
 		if (!tty->warned) {
 			printk(KERN_WARNING "Use of setserial/setrocket to "
 					    "set SPD_* flags is deprecated\n");
 			tty->warned = 1;
 		}
-		return(tty->alt_speed);
+		baud = tty->alt_speed;
 	}
 	
-	return baud_table[i];
+	return baud;
 }
 
+EXPORT_SYMBOL(tty_get_baud_rate);
+
 void tty_flip_buffer_push(struct tty_struct *tty)
 {
 	if (tty->low_latency)

drivers/serial/8250.c

@@ -517,7 +517,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	unsigned char save_lcr, save_mcr;
 	unsigned long flags;
 
-	if (!up->port.iobase && !up->port.membase)
+	if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
 		return;
 
 	DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%08lx): ",
@@ -1031,7 +1031,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 
 		ret = request_irq(up->port.irq, serial8250_interrupt,
 				  irq_flags, "serial", i);
-		if (ret)
+		if (ret < 0)
 			serial_do_unlink(i, up);
 	}
 
@@ -1623,7 +1623,7 @@ static int serial8250_request_port(struct uart_port *port)
 	if (up->port.flags & UPF_RESOURCES) {
 		if (up->port.type == PORT_RSA) {
 			ret = serial8250_request_rsa_resource(up, &res_rsa);
-			if (ret)
+			if (ret < 0)
 				return ret;
 		}
 
@@ -1641,7 +1641,7 @@ static int serial8250_request_port(struct uart_port *port)
 			ret = -ENOMEM;
 	}
 
-	if (ret) {
+	if (ret < 0) {
 		if (res_rsa)
 			release_resource(res_rsa);
 		if (res)
@@ -1671,11 +1671,11 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	 */
 	if (up->port.flags & UPF_RESOURCES) {
 		ret = serial8250_request_std_resource(up, &res_std);
-		if (ret)
+		if (ret < 0)
 			return;
 
 		ret = serial8250_request_rsa_resource(up, &res_rsa);
-		if (ret)
+		if (ret < 0)
 			probeflags &= ~PROBE_RSA;
 	} else {
 		probeflags &= ~PROBE_RSA;
@@ -1950,6 +1950,7 @@ static int __register_serial(struct serial_struct *req, int line)
 	port.regshift = req->iomem_reg_shift;
 	port.iotype   = req->io_type;
 	port.flags    = req->flags | UPF_BOOT_AUTOCONF;
+	port.mapbase  = req->iomap_base;
 	port.line     = line;
 
 	if (share_irqs)
@@ -2029,11 +2030,10 @@ static int __init serial8250_init(void)
 		spin_lock_init(&irq_lists[i].lock);
 
 	ret = uart_register_driver(&serial8250_reg);
-	if (ret)
-		return ret;
-
+	if (ret >= 0)
 		serial8250_register_ports(&serial8250_reg);
-	return 0;
+
+	return ret;
 }
 
 static void __exit serial8250_exit(void)

drivers/serial/8250_pci.c

@@ -176,6 +176,7 @@ get_pci_port(struct pci_dev *dev, struct pci_board *board,
 		return 0;
 	}
 	req->io_type = SERIAL_IO_MEM;
+	req->iomap_base = port;
 	req->iomem_base = ioremap(port, board->uart_offset);
 	if (req->iomem_base == NULL)
 		return -ENOMEM;
@@ -262,12 +263,14 @@ static int __devinit pci_plx9050_fn(struct pci_dev *dev, int enable)
  * interface chip and different configuration methods:
  *     - 10x cards have control registers in IO and/or memory space;
  *     - 20x cards have control registers in standard PCI configuration space.
+ *
+ * Note: some SIIG cards are probed by the parport_serial object.
  */
 
 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
 
-static int __devinit pci_siig10x_fn(struct pci_dev *dev, int enable)
+int pci_siig10x_fn(struct pci_dev *dev, int enable)
 {
 	u16 data, *p;
 
@@ -295,10 +298,12 @@ static int __devinit pci_siig10x_fn(struct pci_dev *dev, int enable)
 	return 0;
 }
 
+EXPORT_SYMBOL(pci_siig10x_fn);
+
 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
 
-static int __devinit pci_siig20x_fn(struct pci_dev *dev, int enable)
+int pci_siig20x_fn(struct pci_dev *dev, int enable)
 {
 	u8 data;
 
@@ -318,6 +323,8 @@ static int __devinit pci_siig20x_fn(struct pci_dev *dev, int enable)
 	return 0;
 }
 
+EXPORT_SYMBOL(pci_siig20x_fn);
+
 /* Added for EKF Intel i960 serial boards */
 static int __devinit pci_inteli960ni_fn(struct pci_dev *dev, int enable)
 {

drivers/serial/Makefile

@@ -4,7 +4,7 @@
 #  $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
 #
 
-export-objs	:= core.o 8250.o suncore.o
+export-objs	:= core.o 8250.o 8250_pci.o suncore.o
 
 serial-8250-y :=
 serial-8250-$(CONFIG_GSC) += 8250_gsc.o

include/linux/serial.h

@@ -48,6 +48,7 @@ struct serial_struct {
 	unsigned char	*iomem_base;
 	unsigned short	iomem_reg_shift;
 	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
 	int	reserved[1];
 };
 

include/linux/serial_core.h

@@ -186,6 +186,7 @@ struct uart_port {
 	unsigned int		timeout;		/* character-based timeout */
 	unsigned int		type;			/* port type */
 	struct uart_ops		*ops;
+	unsigned int		custom_divisor;
 	unsigned int		line;			/* port index */
 	unsigned long		mapbase;		/* for ioremap */
 	unsigned char		hub6;			/* this should be in the 8250 driver */
@@ -204,8 +205,6 @@ struct uart_state {
 #define USF_CLOSING_WAIT_INF	(0)
 #define USF_CLOSING_WAIT_NONE	(65535)
 
-	unsigned int		custom_divisor;
-
 	int			count;
 	struct uart_info	*info;
 	struct uart_port	*port;

include/linux/tty.h

@@ -397,6 +397,7 @@ extern void do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
 extern void tty_flip_buffer_push(struct tty_struct *tty);
 extern int tty_get_baud_rate(struct tty_struct *tty);
+extern int tty_termios_baud_rate(struct termios *termios);
 
 /* n_tty.c */
 extern struct tty_ldisc tty_ldisc_N_TTY;

kernel/ksyms.c

@@ -353,13 +353,8 @@ EXPORT_SYMBOL(generic_file_writev);
 EXPORT_SYMBOL(iov_shorten);
 
 /* tty routines */
-EXPORT_SYMBOL(tty_hangup);
 EXPORT_SYMBOL(tty_wait_until_sent);
-EXPORT_SYMBOL(tty_check_change);
-EXPORT_SYMBOL(tty_hung_up_p);
 EXPORT_SYMBOL(tty_flip_buffer_push);
-EXPORT_SYMBOL(tty_get_baud_rate);
-EXPORT_SYMBOL(do_SAK);
 
 /* filesystem registration */
 EXPORT_SYMBOL(register_filesystem);