Skip to content

L
linux
Commit fd7090e3 authored by Martin K. Petersen's avatar Martin K. Petersen
Browse files
Options

Merge patch series "scsi: mpt3sas: Use flexible arrays and do a few cleanups" 

James Seo <james@equiv.tech> says:

Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") has
resulted in the only arrays that UBSAN_BOUNDS considers unbounded
being trailing arrays declared with [] as the last member of a
struct. Unbounded trailing arrays declared with [1] are common in
mpt3sas, which is causing spurious warnings to appear in some
situations, e.g. when more than one physical disk is connected:

  UBSAN: array-index-out-of-bounds in drivers/scsi/mpt3sas/mpt3sas_scsih.c:6810:36
  index 1 is out of range for type 'MPI2_SAS_IO_UNIT0_PHY_DATA [1]'

which relates to this unbounded array access:

  port_id = sas_iounit_pg0->PhyData[i].Port;

and is just one example of 10 similar warnings currently occurring for
me during boot.

This series converts most trailing arrays declared with [1] in mptsas
into proper C99 flexible array members. Those that are not unbounded
and really are fixed-length arrays of length 1 are left alone.

I didn't find any conversions that required further source edits
besides changing [1] to [], and everything seems to work with my
SAS2008-based add-in card, but please look things over in case I
missed something subtle.

Rounding out the series are some opportunistic cleanups.

The only dependency is that patch 7 ("Use struct_size() for struct
size calculations") depends on patches 3-5.

Link: https://lore.kernel.org/r/20230806170604.16143-1-james@equiv.techSigned-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parents b85ea95d e1882155
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 151 additions and 293 deletions
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
View file @ fd7090e3
This diff is collapsed.
drivers/scsi/mpt3sas/mpi/mpi2_image.h
View file @ fd7090e3
......@@ -295,20 +295,9 @@ typedef struct _MPI2_EXT_IMAGE_HEADER {
/*FLASH Layout Extended Image Data */
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check RegionsPerLayout at runtime.
*Host code (drivers, BIOS, utilities, etc.) should check NumberOfLayouts and
*RegionsPerLayout at runtime before using Layout[] and Region[].
*/
#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
#endif
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check NumberOfLayouts at runtime.
*/
#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
#endif
typedef struct _MPI2_FLASH_REGION {
U8 RegionType; /*0x00 */
......@@ -325,7 +314,7 @@ typedef struct _MPI2_FLASH_LAYOUT {
U32 Reserved1; /*0x04 */
U32 Reserved2; /*0x08 */
U32 Reserved3; /*0x0C */
MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
MPI2_FLASH_REGION Region[]; /*0x10 */
} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
......@@ -339,7 +328,7 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
U16 MinimumSectorAlignment; /*0x08 */
U16 Reserved3; /*0x0A */
U32 Reserved4; /*0x0C */
MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
MPI2_FLASH_LAYOUT Layout[]; /*0x10 */
} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
......@@ -373,12 +362,9 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
/*Supported Devices Extended Image Data */
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check NumberOfDevices at runtime.
*Host code (drivers, BIOS, utilities, etc.) should check NumberOfDevices at
*runtime before using SupportedDevice[].
*/
#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
#endif
typedef struct _MPI2_SUPPORTED_DEVICE {
U16 DeviceID; /*0x00 */
......@@ -399,7 +385,7 @@ typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
U8 Reserved2; /*0x03 */
U32 Reserved3; /*0x04 */
MPI2_SUPPORTED_DEVICE
SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
SupportedDevice[]; /*0x08 */
} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
......@@ -464,7 +450,7 @@ typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
U8 EncryptionAlgorithm; /*0x02 */
U8 Reserved1; /*0x03 */
U32 Reserved2; /*0x04 */
U32 EncryptedHash[1]; /*0x08 */ /* variable length */
U32 EncryptedHash[]; /*0x08 */
} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
......@@ -508,7 +494,7 @@ typedef struct _MPI25_ENCRYPTED_HASH_DATA {
U8 NumHash; /*0x01 */
U16 Reserved1; /*0x02 */
U32 Reserved2; /*0x04 */
MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /*0x08 */
MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[]; /*0x08 */
} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
......
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
View file @ fd7090e3
......@@ -808,12 +808,9 @@ typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
/*Integrated RAID Configuration Change List Event data */
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check NumElements at runtime.
*Host code (drivers, BIOS, utilities, etc.) should check NumElements at
*runtime before using ConfigElement[].
*/
#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
#endif
typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
U16 ElementFlags; /*0x00 */
......@@ -848,7 +845,7 @@ typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
U8 ConfigNum; /*0x03 */
U32 Flags; /*0x04 */
MPI2_EVENT_IR_CONFIG_ELEMENT
ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
ConfigElement[];/*0x08 */
} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
*PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
Mpi2EventDataIrConfigChangeList_t,
......@@ -969,12 +966,9 @@ typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
/*SAS Topology Change List Event data */
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check NumEntries at runtime.
*Host code (drivers, BIOS, utilities, etc.) should check NumEntries at
*runtime before using PHY[].
*/
#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
#endif
typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
U16 AttachedDevHandle; /*0x00 */
......@@ -994,7 +988,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
U8 ExpStatus; /*0x0A */
U8 PhysicalPort; /*0x0B */
MPI2_EVENT_SAS_TOPO_PHY_ENTRY
PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */
PHY[]; /*0x0C */
} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
*PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
Mpi2EventDataSasTopologyChangeList_t,
......@@ -1229,12 +1223,9 @@ typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
/*PCIe Topology Change List Event data (MPI v2.6 and later) */
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check NumEntries at runtime.
*Host code (drivers, BIOS, utilities, etc.) should check NumEntries at
*runtime before using PortEntry[].
*/
#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
#endif
typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
U16 AttachedDevHandle; /*0x00 */
......@@ -1286,7 +1277,7 @@ typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
U8 SwitchStatus; /*0x0A */
U8 PhysicalPort; /*0x0B */
MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
PortEntry[]; /*0x0C */
} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
*PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
Mpi26EventDataPCIeTopologyChangeList_t,
......
drivers/scsi/mpt3sas/mpt3sas_base.c
View file @ fd7090e3
......@@ -4893,8 +4893,7 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
if (!num_phys)
return;
sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
sizeof(Mpi2SasIOUnit1PhyData_t));
sz = struct_size(sas_iounit_pg1, PhyData, num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -5044,7 +5043,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
{
Mpi26DriverTriggerPage2_t trigger_pg2;
struct SL_WH_EVENT_TRIGGER_T *event_tg;
MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY *mpi_event_tg;
MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY *mpi_event_tg;
Mpi2ConfigReply_t mpi_reply;
int r = 0, i = 0;
u16 count = 0;
......@@ -5096,7 +5095,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
{
Mpi26DriverTriggerPage3_t trigger_pg3;
struct SL_WH_SCSI_TRIGGER_T *scsi_tg;
MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY *mpi_scsi_tg;
MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY *mpi_scsi_tg;
Mpi2ConfigReply_t mpi_reply;
int r = 0, i = 0;
u16 count = 0;
......@@ -5148,7 +5147,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
{
Mpi26DriverTriggerPage4_t trigger_pg4;
struct SL_WH_MPI_TRIGGER_T *status_tg;
MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY *mpi_status_tg;
MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY *mpi_status_tg;
Mpi2ConfigReply_t mpi_reply;
int r = 0, i = 0;
u16 count = 0;
......@@ -5379,10 +5378,9 @@ _base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc)
static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc)
{
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
Mpi2SasIOUnitPage1_t sas_iounit_pg1;
Mpi26PCIeIOUnitPage1_t pcie_iounit_pg1;
u16 depth;
int sz;
int rc = 0;
ioc->max_wideport_qd = MPT3SAS_SAS_QUEUE_DEPTH;
......@@ -5392,28 +5390,21 @@ static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc)
if (!ioc->is_gen35_ioc)
goto out;
/* sas iounit page 1 */
sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData);
sas_iounit_pg1 = kzalloc(sizeof(Mpi2SasIOUnitPage1_t), GFP_KERNEL);
if (!sas_iounit_pg1) {
pr_err("%s: failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return rc;
}
rc = mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
sas_iounit_pg1, sz);
&sas_iounit_pg1, sizeof(Mpi2SasIOUnitPage1_t));
if (rc) {
pr_err("%s: failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out;
}
depth = le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth);
depth = le16_to_cpu(sas_iounit_pg1.SASWideMaxQueueDepth);
ioc->max_wideport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH);
depth = le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth);
depth = le16_to_cpu(sas_iounit_pg1.SASNarrowMaxQueueDepth);
ioc->max_narrowport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH);
depth = sas_iounit_pg1->SATAMaxQDepth;
depth = sas_iounit_pg1.SATAMaxQDepth;
ioc->max_sata_qd = (depth ? depth : MPT3SAS_SATA_QUEUE_DEPTH);
/* pcie iounit page 1 */
......@@ -5432,7 +5423,6 @@ static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc)
"MaxWidePortQD: 0x%x MaxNarrowPortQD: 0x%x MaxSataQD: 0x%x MaxNvmeQD: 0x%x\n",
ioc->max_wideport_qd, ioc->max_narrowport_qd,
ioc->max_sata_qd, ioc->max_nvme_qd));
kfree(sas_iounit_pg1);
return rc;
}
......@@ -5588,6 +5578,7 @@ mpt3sas_atto_init(struct MPT3SAS_ADAPTER *ioc)
static int
_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
{
Mpi2IOUnitPage8_t iounit_pg8;
Mpi2ConfigReply_t mpi_reply;
u32 iounit_pg1_flags;
int tg_flags = 0;
......@@ -5684,7 +5675,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
rc = mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
if (rc)
return rc;
rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &iounit_pg8);
if (rc)
return rc;
_base_display_ioc_capabilities(ioc);
......@@ -5706,8 +5697,8 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
if (rc)
return rc;
if (ioc->iounit_pg8.NumSensors)
ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
if (iounit_pg8.NumSensors)
ioc->temp_sensors_count = iounit_pg8.NumSensors;
if (ioc->is_aero_ioc) {
rc = _base_update_ioc_page1_inlinewith_perf_mode(ioc);
if (rc)
......
drivers/scsi/mpt3sas/mpt3sas_base.h
View file @ fd7090e3
......@@ -1237,7 +1237,6 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @ioc_pg8: static ioc page 8
* @iounit_pg0: static iounit page 0
* @iounit_pg1: static iounit page 1
* @iounit_pg8: static iounit page 8
* @sas_hba: sas host object
* @sas_expander_list: expander object list
* @enclosure_list: enclosure object list
......@@ -1465,7 +1464,6 @@ struct MPT3SAS_ADAPTER {
Mpi2IOCPage8_t ioc_pg8;
Mpi2IOUnitPage0_t iounit_pg0;
Mpi2IOUnitPage1_t iounit_pg1;
Mpi2IOUnitPage8_t iounit_pg8;
Mpi2IOCPage1_t ioc_pg1_copy;
struct _boot_device req_boot_device;
......
drivers/scsi/mpt3sas/mpt3sas_config.c
View file @ fd7090e3
......@@ -2334,7 +2334,7 @@ mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
tg_pg2.NumMPIEventTrigger = 0;
memset(&tg_pg2.MPIEventTriggers[0], 0,
NUM_VALID_ENTRIES * sizeof(
MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY));
MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY));
}
rc = _config_set_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2);
......@@ -2493,7 +2493,7 @@ mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
tg_pg3.NumSCSISenseTrigger = 0;
memset(&tg_pg3.SCSISenseTriggers[0], 0,
NUM_VALID_ENTRIES * sizeof(
MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY));
MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY));
}
rc = _config_set_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3);
......@@ -2649,7 +2649,7 @@ mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
tg_pg4.NumIOCStatusLogInfoTrigger = 0;
memset(&tg_pg4.IOCStatusLoginfoTriggers[0], 0,
NUM_VALID_ENTRIES * sizeof(
MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY));
MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY));
}
rc = _config_set_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4);
......
drivers/scsi/mpt3sas/mpt3sas_scsih.c
View file @ fd7090e3
......@@ -2431,8 +2431,7 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
}
raid_device->num_pds = num_pds;
sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
sizeof(Mpi2RaidVol0PhysDisk_t));
sz = struct_size(vol_pg0, PhysDisk, num_pds);
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
dfailprintk(ioc,
......@@ -5966,8 +5965,7 @@ _scsih_update_vphys_after_reset(struct MPT3SAS_ADAPTER *ioc)
/*
* Read SASIOUnitPage0 to get each HBA Phy's data.
*/
sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) +
(ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t));
sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -6145,8 +6143,7 @@ _scsih_get_port_table_after_reset(struct MPT3SAS_ADAPTER *ioc,
u64 attached_sas_addr;
u8 found = 0, port_count = 0, port_id;
sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
* sizeof(Mpi2SasIOUnit0PhyData_t));
sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -6579,8 +6576,7 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n",
(u64)ioc->sas_hba.sas_address));
sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
* sizeof(Mpi2SasIOUnit0PhyData_t));
sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -6731,8 +6727,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
ioc->sas_hba.num_phys = num_phys;
/* sas_iounit page 0 */
sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
sizeof(Mpi2SasIOUnit0PhyData_t));
sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -6754,8 +6749,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
}
/* sas_iounit page 1 */
sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
sizeof(Mpi2SasIOUnit1PhyData_t));
sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -10376,8 +10370,8 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
Mpi2ExpanderPage0_t expander_pg0;
Mpi2SasDevicePage0_t sas_device_pg0;
Mpi26PCIeDevicePage0_t pcie_device_pg0;
Mpi2RaidVolPage1_t *volume_pg1;
Mpi2RaidVolPage0_t *volume_pg0;
Mpi2RaidVolPage1_t volume_pg1;
Mpi2RaidVolPage0_t volume_pg0;
Mpi2RaidPhysDiskPage0_t pd_pg0;
Mpi2EventIrConfigElement_t element;
Mpi2ConfigReply_t mpi_reply;
......@@ -10392,16 +10386,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
u8 retry_count;
unsigned long flags;
volume_pg0 = kzalloc(sizeof(*volume_pg0), GFP_KERNEL);
if (!volume_pg0)
return;
volume_pg1 = kzalloc(sizeof(*volume_pg1), GFP_KERNEL);
if (!volume_pg1) {
kfree(volume_pg0);
return;
}
ioc_info(ioc, "scan devices: start\n");
_scsih_sas_host_refresh(ioc);
......@@ -10511,7 +10495,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
/* volumes */
handle = 0xFFFF;
while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
......@@ -10519,15 +10503,15 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
break;
}
handle = le16_to_cpu(volume_pg1->DevHandle);
handle = le16_to_cpu(volume_pg1.DevHandle);
spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_wwid(ioc,
le64_to_cpu(volume_pg1->WWID));
le64_to_cpu(volume_pg1.WWID));
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (raid_device)
continue;
if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
&volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
sizeof(Mpi2RaidVolPage0_t)))
continue;
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
......@@ -10537,17 +10521,17 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
break;
}
if (volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
element.VolDevHandle = volume_pg1->DevHandle;
element.VolDevHandle = volume_pg1.DevHandle;
ioc_info(ioc, "\tBEFORE adding volume: handle (0x%04x)\n",
volume_pg1->DevHandle);
volume_pg1.DevHandle);
_scsih_sas_volume_add(ioc, &element);
ioc_info(ioc, "\tAFTER adding volume: handle (0x%04x)\n",
volume_pg1->DevHandle);
volume_pg1.DevHandle);
}
}
......@@ -10636,9 +10620,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
handle, (u64)le64_to_cpu(pcie_device_pg0.WWID));
}
kfree(volume_pg0);
kfree(volume_pg1);
ioc_info(ioc, "\tpcie devices: pcie end devices complete\n");
ioc_info(ioc, "scan devices: complete\n");
}
......
drivers/scsi/mpt3sas/mpt3sas_transport.c
View file @ fd7090e3
......@@ -1792,8 +1792,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
/* handle hba phys */
/* read sas_iounit page 0 */
sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
sizeof(Mpi2SasIOUnit0PhyData_t));
sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -1833,8 +1832,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
}
/* read sas_iounit page 1 */
sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
sizeof(Mpi2SasIOUnit1PhyData_t));
sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......@@ -1944,8 +1942,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
/* handle hba phys */
/* sas_iounit page 1 */
sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
sizeof(Mpi2SasIOUnit1PhyData_t));
sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
......
drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h
View file @ fd7090e3
......@@ -20,12 +20,12 @@
#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER (0xE0)
#define MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION (0x01)
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 {
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_0 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 TriggerFlags; /* 0x08 */
U16 Reserved0xA; /* 0x0A */
U32 Reserved0xC[61]; /* 0x0C */
} _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0, Mpi26DriverTriggerPage0_t;
} _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_0, Mpi26DriverTriggerPage0_t;
/* Trigger Flags */
#define MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID (0x0001)
......@@ -34,61 +34,61 @@ typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 {
#define MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID (0x0008)
#define MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION (0x01)
typedef struct _MPI26_DRIVER_MASTER_TIGGER_ENTRY {
typedef struct _MPI26_DRIVER_MASTER_TRIGGER_ENTRY {
U32 MasterTriggerFlags;
} MPI26_DRIVER_MASTER_TIGGER_ENTRY;
} MPI26_DRIVER_MASTER_TRIGGER_ENTRY;
#define MPI26_MAX_MASTER_TRIGGERS (1)
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_1 {
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_1 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 NumMasterTrigger; /* 0x08 */
U16 Reserved0xA; /* 0x0A */
MPI26_DRIVER_MASTER_TIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TIGGER_1, Mpi26DriverTriggerPage1_t;
MPI26_DRIVER_MASTER_TRIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_1, Mpi26DriverTriggerPage1_t;
#define MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION (0x01)
typedef struct _MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY {
typedef struct _MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY {
U16 MPIEventCode; /* 0x00 */
U16 MPIEventCodeSpecific; /* 0x02 */
} MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY;
} MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY;
#define MPI26_MAX_MPI_EVENT_TRIGGERS (20)
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_2 {
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_2 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 NumMPIEventTrigger; /* 0x08 */
U16 Reserved0xA; /* 0x0A */
MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TIGGER_2, Mpi26DriverTriggerPage2_t;
MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_2, Mpi26DriverTriggerPage2_t;
#define MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION (0x01)
typedef struct _MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY {
typedef struct _MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY {
U8 ASCQ; /* 0x00 */
U8 ASC; /* 0x01 */
U8 SenseKey; /* 0x02 */
U8 Reserved; /* 0x03 */
} MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY;
} MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY;
#define MPI26_MAX_SCSI_SENSE_TRIGGERS (20)
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_3 {
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_3 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 NumSCSISenseTrigger; /* 0x08 */
U16 Reserved0xA; /* 0x0A */
MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TIGGER_3, Mpi26DriverTriggerPage3_t;
MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_3, Mpi26DriverTriggerPage3_t;
#define MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION (0x01)
typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY {
typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY {
U16 IOCStatus; /* 0x00 */
U16 Reserved; /* 0x02 */
U32 LogInfo; /* 0x04 */
} MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY;
} MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY;
#define MPI26_MAX_LOGINFO_TRIGGERS (20)
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_4 {
typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_4 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 NumIOCStatusLogInfoTrigger; /* 0x08 */
U16 Reserved0xA; /* 0x0A */
MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TIGGER_4, Mpi26DriverTriggerPage4_t;
MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS]; /* 0x0C */
} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_4, Mpi26DriverTriggerPage4_t;
#endif
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
View file @ fd7090e3
......@@ -141,8 +141,7 @@ mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
return;
}
sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
sizeof(Mpi2RaidVol0PhysDisk_t));
sz = struct_size(vol_pg0, PhysDisk, num_pds);
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7