RLC-PMFW handshake happens periodically when GFXCLK DPM is enabled and
halting RLC may cause unexpected results. Avoid halting RLC from driver
side.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Access registers with the right xcc id. Also, remove the unused logic as
PG is not used in GFX v9.4.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Increase the maximum number of queues that can be created per process
to 255 on GFX 9.4.3. There is no HWS limitation restricting the number
queues that can be created.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It turns out STATUS_VALID_FLAG needs to be checked
ahead of any other fields. ADDRESS_VALID_FLAG and
ERR_INFO_VALID_FLAG only manages ADDRESS and ERR_INFO
field respectively. driver should continue poll
ERR CNT field even ERR_INFO_VALD_FLAG is not set.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize jpeg v4_0_3 ras function.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add reset_ras_error_count callback for jpeg v4_0_3.
It will be used to reset jpeg ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add query_ras_error_count callback for jpeg v4_0_3.
It will be used to query and log jpeg error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCN RAS enablement sequence needs to be added in
DPG HW init sequence.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize vcn v4_0_3 ras function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add reset_ras_error_count callback for vcn v4_0_3.
It will be used to reset vcn ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add query_ras_error_count callback for vcn v4_0_3.
It will be used to query and log vcn error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new ras error status registers introduced in
vcn v4_0_3 to log vcn and jpeg ras error.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV on some parts, the host driver does not post VBIOS. So the guest
cannot get bios information. Therefore, adev->virt.fw_reserve.p_pf2vf
and adev->mode_info.atom_context are NULL.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV, the memory partitions are set on host drover. Each VF only
has one memory partition. We need set the memory partitions to 1 on
guest driver for SRIOV.

V2: sqaush in fix ("drm/amdgpu: Fix memory range info of GC 9.4.3 VFs")
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Acked-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The MC_VM_FB_OFFSET is PF only register. It cannot be read on VF.
So, the driver should not use MC_VM_FB_OFFSET address to set the
address of dev->gmc.aper_base.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add PSP supporting PSP 13.0.6 SRIOV ucode init.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add PSP ring command interface for spatial partitioning.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Return error if an invalid compute partition mode is requested.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Keep a helper function to get description of compute partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When aperture size is zero, there is no mapping done.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On GFXIP 9.4.3, we dont need to rely on xGMI hive info to determine P2P
access.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For native mode, after amdgpu_bo is created on CPU domain, then call
amdgpu_ttm_tt_set_mem_pool to select the TTM pool using bo->mem_id.
ttm_bo_validate will allocate the memory to the correct memory partition
before mapping to GPUs.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For native mode only, create TTM pool for each memory partition to store
the NUMA node id, then the TTM pool will be selected using memory
partition id to allocate memory from the correct partition.
Acked-by: Christian König <christian.koenig@amd.com>
(rajneesh: changed need_swiotlb and need_dma32 to false for pool init)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ttm_pool_init is exported and used outside of ttm subsystem with
amdgpu_ttm interface, similarly export ttm_pool_fini for proper cleanup.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When auto mode is specified, driver will choose the right compute
partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check the memory ranges available to the device also for deciding a
valid partition mode. Only select combinations are valid for a
particular mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of start xcc id and number of xcc per node, use the xcc mask
which is the mask of logical ids of xccs belonging to a parition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fetch xcp information from xcp_mgr and also add xcc_mask to kfd node.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After partition switch, fill all relevant xcp information before kfd
starts initialization.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement callbacks to fill memory node information in aquavanjaram.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add callback in xcp interface to fill xcp memory id information. Memory
id is used to identify the range/partition of an XCP from the available
memory partitions in device. Also, fill the id information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GC 9.4.3 ASICS may have memory split into multiple partitions.Initialize
the memory partition information for each range. The information may be
in the form of a numa node id or a range of pages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some ASICs have the device memory divided into multiple partitions. The
parititions could be denoted by a numa node or by a range of pages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add interface to get numa information of ACPI XCC object. The interface
uses logical id to identify an XCC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use a struct to store additional numa node information including size
and base address. Add numa_info pointer to xcc object to point to the
relevant structure based on its proximity domain.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Expand the interface to get supported memory partition modes also along
with the current memory partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GMC block handles memory related information, it makes more sense to
keep memory partition functions in gmc block.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add utility functions to get details of xcp and iterate through
available xcps.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the generic term fw_reserved_memory for FW reserve region. This
region may also hold discovery TMR in addition to other reserve
regions. This region size could be larger than discovery tmr size, hence
don't change the discovery tmr size based on this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For IH ring buffer and read/write pointers, use GPU VA space rather than
Guest PA on APU configs. Access through Guest PA doesn't work when IOMMU
is enabled. It is also beneficial in NUMA configs as it allocates from
the closest numa pool in a numa enabled system.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>