Mostly just initial support for Turing TU104/TU106 chipsets.  Support
for TU102 is missing as I don't yet have HW, but it should be trivial
to add in later in the merge window (in theory).

It's a bit of a rough first pass that'll get improved in future
releases as a finish figuring out some of the other HW changes, but
it's good enough as it stands for modesetting and suspend/resume etc.

Acceleration bring-up is incomplete due to NVIDIA not yet having
provided FW images for me to use, though command submission and copy
engines are functional already.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7KmfcQqZcx+wh_1UKjTovp4PH_5UVMfeyxUu-M9WLZfw@mail.gmail.com

drm/tegra: Changes for v4.21-rc1

These changes contain a couple of minor fixes for host1x and the Falcon
library in Tegra DRM. There are also a couple of missing pieces that
finally enable support for host1x, VIC and display on Tegra194. I've
also added a patch that enables audio over HDMI using the SOR which has
been tested, and works, on both Tegra186 and Tegra194.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207134712.32683-1-thierry.reding@gmail.com

[airlied: make etnaviv build again]

amdgpu:
- DC trace support
- More DC documentation
- XGMI hive reset support
- Rework IH interaction with KFD
- Misc fixes and cleanups
- Powerplay updates for newer polaris variants
- Add cursor plane update fast path
- Enable gpu reset by default on CI parts
- Fix config with KFD/HSA not enabled

amdkfd:
- Limit vram overcommit
- dmabuf support
- Support for doorbell BOs

ttm:
- Support for simultaneous submissions to multiple engines

scheduler:
- Add helpers for hw with preemption support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207233119.16861-1-alexander.deucher@amd.com

[Why]
Legacy cursor plane updates from drm helpers go through the full
atomic codepath. A high volume of cursor updates through this slow
code path can cause subsequent page-flips to skip vblank intervals
since each individual update is slow.

This problem is particularly noticeable for the compton compositor.

[How]
A fast path for cursor plane updates is added by using DRM asynchronous
commit support provided by async_check and async_update. These don't do
a full state/flip_done dependency stall and they don't block other
commit work.

However, DC still expects itself to be single-threaded for anything
that can issue register writes. Screen corruption or hangs can occur
if write sequences overlap. Every call that potentially perform
register writes needs to be guarded for asynchronous updates to work.
The dc_lock mutex was added for this.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106175Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

I retested Bonaire (gfx7 dGPU) and it works fine.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
These properties aren't being carried over when the atomic state.
This tricks atomic check and commit tail into performing underscan
and scaling operations when they aren't needed.

With the patch that forced scaling/RMX_ASPECT on by default this
results in many unnecessary surface updates and hangs under certain
conditions.

[How]
Duplicate the properties.

Fixes: 91b66c47 ("drm/amd/display: Set RMX_ASPECT as default")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.

Banding occurs for these displays.

[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.

Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 91b66c47.

Forcing RMX_ASPECT as default uses the preferred/native mode's timings
for any mode the user selects and scales the image. This provides a
a consistently nicer result in the case where the selected mode's
refresh rate matches the native mode's refresh but this isn't always
the case.

For example, if the monitor is 1080p@144Hz and the preferred mode is
60Hz then even if the user selects 1080p@144Hz as their selected mode
they'll get 1080p@60Hz.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This function was renamed in a previous commit. Update the stub
function name for builds with CONFIG_HSA_AMD disabled.

Fixes: 611736d8 ("drm/amdgpu: Add KFD VRAM limit checking")
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GP100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GP102.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GP102.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with NV50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GK20A.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GF100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GM107.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GM200.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GK104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GM200.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GK104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

No real surprised here so far.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GP100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

RTX2070 appears to have 3 copies of the engine.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Various different bits and pieces vs GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Appears to be compatible with GP100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>