In architecture like x86_64, arm64 and riscv, they have vast virtual
address space and usually have huge physical memory RAM.  Their
crashkernel reservation doesn't have to be limited under 4G RAM, but can
be extended to the whole physical memory via crashkernel=,high support.

Now add function reserve_crashkernel_generic() to reserve crashkernel
memory if users specify any case of kernel pamameters, like
crashkernel=xM[@offset] or crashkernel=,high|low.

This is preparation to simplify code of crashkernel=,high support in
architecutures.

Link: https://lkml.kernel.org/r/20230914033142.676708-5-bhe@redhat.comSigned-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Now parse_crashkernel() is a real entry point for all kinds of crahskernel
parsing on any architecture.

And wrap the crahskernel=,high|low handling inside
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION ifdeffery scope.

Link: https://lkml.kernel.org/r/20230914033142.676708-4-bhe@redhat.comSigned-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added.  Make adjustments in
all call sites of parse_crashkernel() in arch.

Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.comSigned-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "kdump: use generic functions to simplify crashkernel
reservation in arch", v3.

In the current arm64, crashkernel=,high support has been finished after
several rounds of posting and careful reviewing.  The code in arm64 which
parses crashkernel kernel parameters firstly, then reserve memory can be a
good example for other ARCH to refer to.

Whereas in x86_64, the code mixing crashkernel parameter parsing and
memory reserving is twisted, and looks messy.  Refactoring the code to
make it more readable maintainable is necessary.

Here, firstly abstract the crashkernel parameter parsing code into
parse_crashkernel() to make it be able to parse crashkernel=,high|low. 
Then abstract the crashkernel memory reserving code into a generic
function reserve_crashkernel_generic().  Finally, in ARCH which
crashkernel=,high support is needed, a simple arch_reserve_crashkernel()
can be added to call above two functions.  This can remove the duplicated
implmentation code in each ARCH, like arm64, x86_64 and riscv.

crashkernel=512M,high
crashkernel=512M,high crashkernel=256M,low
crashkernel=512M,high crashkernel=0M,low
crashkernel=0M,high crashkernel=256M,low
crashkernel=512M
crashkernel=512M@0x4f000000
crashkernel=1G-4G:256M,4G-64G:320M,64G-:576M
crashkernel=0M


This patch (of 9):

In all call sites of __parse_crashkernel(), the parameter 'name' is
hardcoded as "crashkernel=".  So remove the unnecessary parameter 'name',
add local varibale 'name' inside __parse_crashkernel() instead.

Link: https://lkml.kernel.org/r/20230914033142.676708-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20230914033142.676708-2-bhe@redhat.comSigned-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

strlcpy() reads the entire source buffer first.  This read may exceed the
destination size limit.  This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1].  In an effort
to remove strlcpy() completely [2], replace strlcpy() here with
sysfs_emit().

Direct replacement is safe here since its ok for `kernel_param_ops.get()`
to return -errno [3].

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
[3] https://elixir.bootlin.com/linux/v6.5/source/include/linux/moduleparam.h#L52

Link: https://lkml.kernel.org/r/20230831193827.1528867-1-azeemshaikh38@gmail.comSigned-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

BUILD_BUG_ON*() macros are defined in build_bug.h.  Include it.  Replace
compiler_types.h by compiler.h, which provides the former, to have a
definition of the __UNIQUE_ID().

Link: https://lkml.kernel.org/r/20230912092355.79280-1-andriy.shevchenko@linux.intel.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

commit 95846ecf("pid: replace pid bitmap implementation with IDR API")
removes 'last_pid' element, and use the idr_get_cursor-idr_set_cursor pair
to set the value of idr, so useless comments should be removed.

Link: https://lkml.kernel.org/r/tencent_157A2A1CAF19A3F5885F0687426159A19708@qq.comSigned-off-by: Rong Tao <rongtao@cestc.cn>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It appears that compiler_types.h already have an implementation of the
__unconst_integer_typeof() called __unqual_scalar_typeof().  Use it
instead of the copy.

Link: https://lkml.kernel.org/r/20230911154913.4176033-1-andriy.shevchenko@linux.intel.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add a kthread_stop_put() helper that stops a thread and puts its task
struct.  Use it to replace the various instances of kthread_stop()
followed by put_task_struct().

Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().

[agruenba@redhat.com: fix kerneldoc comment]
  Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.comSigned-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

do/while_each_thread should be avoided when possible.

Plus I _think_ this change allows to avoid lock_task_sighand() but I am
not sure, I forgot everything about taskstats.  In any case, this code
does not look right in that the same thread can be accounted twice:
taskstats_exit() can account the exiting thread in signal->stats and drop
->siglock but this thread is still on the thread-group list, so
lock_task_sighand() can't help.

Link: https://lkml.kernel.org/r/20230909214951.GA24274@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

do/while_each_thread should be avoided when possible.

Plus this change allows to avoid lock_task_sighand(), we can use rcu
and/or sig->stats_lock instead.

Link: https://lkml.kernel.org/r/20230909172629.GA20454@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

No functional changes, cleanup/preparation.

Link: https://lkml.kernel.org/r/20230909172554.GA20441@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

do/while_each_thread should be avoided when possible.

Link: https://lkml.kernel.org/r/20230909164537.GA11633@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

do/while_each_thread should be avoided when possible.

Link: https://lkml.kernel.org/r/20230909164501.GA11581@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for read-write file to reduce some
duplicated code.

Link: https://lkml.kernel.org/r/20230905024835.43219-4-yangxingui@huawei.comSigned-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Co-developed-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for read-write file to reduce some
duplicated code.

Link: https://lkml.kernel.org/r/20230905024835.43219-3-yangxingui@huawei.comSigned-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Co-developed-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Add helper macro DEFINE_SHOW_STORE_ATTRIBUTE() at
seq_file.c", v6.

We already own DEFINE_SHOW_ATTRIBUTE() helper macro for defining attribute
for read-only file, but we found many of drivers also want a helper macro
for read-write file too.

So we add this helper macro to reduce duplicated code.


This patch (of 3):

We already own DEFINE_SHOW_ATTRIBUTE() helper macro for defining attribute
for read-only file, but many of drivers want a helper macro for read-write
file too.

So we add DEFINE_SHOW_STORE_ATTRIBUTE() helper to reduce duplicated code.

Link: https://lkml.kernel.org/r/20230905024835.43219-1-yangxingui@huawei.com
Link: https://lkml.kernel.org/r/20230905024835.43219-2-yangxingui@huawei.comSigned-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Co-developed-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in panic() and nmi_panic().  x86 CMPXCHG instruction returns success in ZF
flag, so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).

Also, rename cpu variable to this_cpu in nmi_panic() and try to unify
logic flow between panic() and nmi_panic().

No functional change intended.

[ubizjak@gmail.com: clean up if/else block]
  Link: https://lkml.kernel.org/r/20230906191200.68707-1-ubizjak@gmail.com
Link: https://lkml.kernel.org/r/20230904152230.9227-1-ubizjak@gmail.comSigned-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

No need to calculate/check the "success" variable, we can kill it and update
retval in the main loop unless it is zero.

Link: https://lkml.kernel.org/r/20230823171455.GA12188@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The last user was removed by the previous patch.

Link: https://lkml.kernel.org/r/20230826111409.GA23243@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "kill task_struct->thread_group".


This patch (of 2):

It could use list_is_singular() but this way it is cheaper.  Plus the
thread_group_leader() check makes it clear that thread_group_empty() can
only return true if p is a group leader.  This was not immediately obvious
before this patch.

task_struct->thread_group no longer has users, it can die.

Link: https://lkml.kernel.org/r/20230826111200.GA22982@redhat.com
Link: https://lkml.kernel.org/r/20230826111406.GA23238@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This relies on fact that group leader is always the 1st entry in the
signal->thread_head list.

With or without this change, if the lockless next_thread(last_thread)
races with exec it can return the old or the new leader.

We are almost ready to kill task->thread_group, after this change its
only user is thread_group_empty().

Link: https://lkml.kernel.org/r/20230824143201.GB31222@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "introduce __next_thread(), change next_thread()".

After commit dce8f8ed ("document while_each_thread(), change
first_tid() to use for_each_thread()") + this series

1. We have only one lockless user of next_thread(), task_group_seq_get_next().
   I think it should be changed too.

2. We have only one user of task_struct->thread_group, thread_group_empty().
   The next patches will change thread_group_empty() and kill ->thread_group.


This patch (of 2):

next_tid(start) does:

	rcu_read_lock();
	if (pid_alive(start)) {
		pos = next_thread(start);
		if (thread_group_leader(pos))
			pos = NULL;
		else
			get_task_struct(pos);

it should return pos = NULL when next_thread() wraps to the 1st thread
in the thread group, group leader, and the thread_group_leader() check
tries to detect this case.

But this can race with exec. To simplify, suppose we have a main thread
M and a single sub-thread T, next_tid(T) should return NULL.

Now suppose that T execs. If next_tid(T) is called after T changes the
leadership and before it does release_task() which removes the old leader
from list, then next_thread() returns M and thread_group_leader(M) = F.

Lockless use of next_thread() should be avoided. After this change only
task_group_seq_get_next() does this, and I believe it should be changed
as well.

Link: https://lkml.kernel.org/r/20230824143112.GA31208@redhat.com
Link: https://lkml.kernel.org/r/20230824143142.GA31222@redhat.comSigned-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

global bitmap is a cluster allocator,so after we traverse the global
bitmap and finished the fstrim,the trimmed range should be 'trimmed *
clustersize'.otherwise,the trimmed range printed by 'fstrim -v' is not as
expected.

Link: https://lkml.kernel.org/r/20230828051741.204577-1-yuanhengzhang1214@gmail.comSigned-off-by: Yuanheng Zhang <yuanhengzhang1214@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

commit 6f33d587 ("__UNIQUE_ID()")
added a fallback definition of __UNIQUE_ID because gcc 4.2 and older did
not support __COUNTER__.

Also, this commit is effectively a revert of
commit b41c29b0 ("Kbuild: provide a __UNIQUE_ID for clang")
which mentions clang 2.6+ supporting __COUNTER__.

Documentation/process/changes.rst currently lists the minimum supported
version of these compilers as:
- gcc: 5.1
- clang: 11.0.0
It should be safe to say that __COUNTER__ is well supported by this
point.

Link: https://lkml.kernel.org/r/20230831-unique_id-v1-1-28bacd18eb1d@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Michal rarek <mmarek@suse.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Paul Russel <rusty@rustcorp.com.au>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

After move of Documentation/s390 to Documentation/arch/s390

Link: https://lkml.kernel.org/r/20230825013102.1487979-1-costa.shul@redhat.comSigned-off-by: Costa Shulyupin <costa.shul@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric.devolder@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the module compression with xz so the in-kernel decompressor
   works

 - Document a kconfig idiom to express an optional dependency between
   modules

 - Make modpost, when W=1 is given, detect broken drivers that reference
   .exit.* sections

 - Remove unused code

* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove stale code for 'source' symlink in packaging scripts
  modpost: Don't let "driver"s reference .exit.*
  vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
  modpost: add missing else to the "of" check
  Documentation: kbuild: explain handling optional dependencies
  kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules

Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Fourteen hotfixes, eleven of which are cc:stable. The remainder
  pertain to issues which were introduced after 6.5"

* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  Crash: add lock to serialize crash hotplug handling
  selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
  mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
  mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
  mm, memcg: reconsider kmem.limit_in_bytes deprecation
  mm: zswap: fix potential memory corruption on duplicate store
  arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
  mm: hugetlb: add huge page size param to set_huge_pte_at()
  maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
  maple_tree: add mas_is_active() to detect in-tree walks
  nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
  mm: abstract moving to the next PFN
  mm: report success more often from filemap_map_folio_range()
  fs: binfmt_elf_efpic: fix personality for ELF-FDPIC

Pull misc driver fix from Greg KH:
 "Here is a single, much requested, fix for a set of misc drivers to
  resolve a much reported regression in the -rc series that has also
  propagated back to the stable releases. Sorry for the delay, lots of
  conference travel for a few weeks put me very far behind in patch
  wrangling.

  It has been reported by many to resolve the reported problem, and has
  been in linux-next with no reported issues"

* tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe

Pull tty / serial driver fixes from Greg KH:
 "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some
  reported regressions:

   - revert a n_gsm change that ended up causing problems

   - 8250_port fix for irq data

  both have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"
  serial: 8250_port: Check IRQ data before use

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for
  AMD-derived Hygon processors, and fix a SGX kernel crash in the page
  fault handler that can trigger when ksgxd races to reclaim the SECS
  special page, by making the SECS page unswappable"

* tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
  x86/srso: Add SRSO mitigation for Hygon processors
  x86/kgdb: Fix a kerneldoc warning when build with W=1

Pull timer fix from Ingo Molnar:
 "Fix a spurious kernel warning during CPU hotplug events that may
  trigger when timer/hrtimer softirqs are pending, which are otherwise
  hotplug-safe and don't merit a warning"

* tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Tag (hr)timer softirq as hotplug safe

Pull scheduler fix from Ingo Molnar:
 "Fix a RT tasks related lockup/live-lock during CPU offlining"

* tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix live lock between select_fallback_rq() and RT push

Pull perf event fixes from Ingo Molnar:
 "Misc fixes: work around an AMD microcode bug on certain models, and
  fix kexec kernel PMI handlers on AMD systems that get loaded on older
  kernels that have an unexpected register state"

* tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd: Do not WARN() on every IRQ
  perf/x86/amd/core: Fix overflow reset on hotplug

Since commit d8131c29 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.

Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.

There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.

The dual rule that drivers must not reference .init.* is implemented
since commit 0db25245 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.

Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the left-over of commit e24f6628 ("modpost: remove all
traces of cpuinit/cpuexit sections").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.

Tested with allmodconfig before/after patch; no changes to *.mod.c:

    git checkout v6.6-rc3
    make -j$(nproc) allmodconfig
    make -j$(nproc) olddefconfig

    make -j$(nproc)
    find . -name '*.mod.c' | cpio -pd /tmp/before

    # apply patch

    make -j$(nproc)
    find . -name '*.mod.c' | cpio -pd /tmp/after

    diff -r /tmp/before/ /tmp/after/
    # no difference

Fixes: acbef7b7 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the latest bug fixes that have come up in the soc tree. Most
  of these are fairly minor. Most notably, the majority of changes this
  time are not for dts files as usual.

   - Updates to the addresses of the broadcom and aspeed entries in the
     MAINTAINERS file.

   - Defconfig updates to address a regression on samsung and a build
     warning from an unknown Kconfig symbol

   - Build fixes for the StrongARM and Uniphier platforms

   - Code fixes for SCMI and FF-A firmware drivers, both of which had a
     simple bug that resulted in invalid data, and a lesser fix for the
     optee firmware driver

   - Multiple fixes for the recently added loongson/loongarch "guts" soc
     driver

   - Devicetree fixes for RISC-V on the startfive platform, addressing
     issues with NOR flash, usb and uart.

   - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
     clock, gpio, hdmi settings and the Makefile

   - Bug fixes for i.MX firmware code and the OCOTP soc driver

   - Multiple fixes for the TI sysc bus driver

   - Minor dts updates for TI omap dts files, to address boot time
     warnings and errors"

* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  MAINTAINERS: Fix Florian Fainelli's email address
  arm64: defconfig: enable syscon-poweroff driver
  ARM: locomo: fix locomolcd_power declaration
  soc: loongson: loongson2_guts: Remove unneeded semicolon
  soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
  soc: loongson: loongson_pm2: Populate children syscon nodes
  dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
  soc: loongson: loongson_pm2: Drop useless of_device_id compatible
  dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
  soc: loongson: loongson_pm2: Add dependency for INPUT
  arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
  ARM: uniphier: fix cache kernel-doc warnings
  MAINTAINERS: aspeed: Update Andrew's email address
  MAINTAINERS: aspeed: Update git tree URL
  firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
  arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
  arm64: dts: imx8mm-evk: Fix hdmi@3d node
  soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
  arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
  arm64: dts: imx8mp: Fix SDMA2/3 clocks
  ...