- 04 Jul, 2024 28 commits
-
-
Krzysztof Kozlowski authored
'type' is an enum, thus cast of pointer on 64-bit compile test with clang and W=1 causes: mxs-lradc.c:140:15: error: cast to smaller integer type 'enum mxs_lradc_id' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Year ago this was solved, although LKML discussion suggested warning is not suitable for kernel. Nothing changed in this regard for a year, so assume the warning will stay and we want to have warnings-free builds. Link: https://lore.kernel.org/all/20230814160457.GA2836@dev-arch.thelio-3990X/ Link: https://lore.kernel.org/all/20230810095849.123321-1-krzysztof.kozlowski@linaro.org/Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240606143648.152668-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
Lee Jones <lee@kernel.org>
-
Krzysztof Kozlowski authored
'type' is an enum, thus cast of pointer on 64-bit compile test with clang and W=1 causes: max14577.c:400:23: error: cast to smaller integer type 'enum maxim_device_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Year ago this was solved, although LKML discussion suggested warning is not suitable for kernel. Nothing changed in this regard for a year, so assume the warning will stay and we want to have warnings-free builds. Link: https://lore.kernel.org/all/20230814160457.GA2836@dev-arch.thelio-3990X/ Link: https://lore.kernel.org/all/20230810095849.123321-1-krzysztof.kozlowski@linaro.org/Signed-off-by:
-
Jeff Johnson authored
On x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/arizona.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/pcf50633-gpio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/timberdale.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/ssbi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/rt4831.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/intel_soc_pmic_bxtwc.o Add the missing invocation of the MODULE_DESCRIPTION() macro to all files which have a MODULE_LICENSE(). This includes mfd-core.c and vexpress-sysreg.c which, although they did not produce a warning with the x86 allmodconfig configuration, may cause this warning with other configurations. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Acked-by: Andy Shevchenko <andy@kernel.org> # for Intel Broxton PMIC Link: https://lore.kernel.org/r/20240609-md-drivers-mfd-v1-1-47cdd0b394e9@quicinc.comSigned-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/qcom-pm8008.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Rob Herring (Arm) authored
Add another batch of various "simple" syscon compatibles which were undocumented or still documented with old text bindings. Remove the old text binding docs for the ones which were documented. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Acked-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240603131230.136196-2-robh@kernel.orgSigned-off-by:
-
Ilpo Järvinen authored
The driver has intel_lpss_platform_info structs for I2C, SPI, and UART. The I2C and UART structs are named with "i2c" and "uart" in the variable name, whereas SPI ones do not mention "spi". Rename the SPI related info structs to include "spi" in their names for consistency and to make it obvious in the device ID list what kind of device the line relates to. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240531142505.1888-1-ilpo.jarvinen@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Use device_set_node() instead of assigning pdev->dev.of_node directly because it also sets the firmware node. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20240530115147.1112498-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Add the relevant AUXADC driver entries to the MFD cells of the MT6357, MT6358, MT6359 PMICs to support their Auxiliary ADCs. Signed-off-by:
-
Konrad Dybcio authored
These are just some more PMICs adjacent to X1 SoCs. Document them. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by:
-
Arnd Bergmann authored
Linking a file into two modules can have unintended side-effects and produces a W=1 warning: scripts/Makefile.build:236: drivers/mfd/Makefile: rsmu_core.o is added to multiple modules: rsmu-i2c rsmu-spi Make this one a separate module instead. Fixes: a1867f85 ("mfd: Add Renesas Synchronization Management Unit (SMU) support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240529094856.1869543-1-arnd@kernel.orgSigned-off-by:
-
Thomas Weißschuh authored
Add ChromeOS EC-based hardware monitoring as EC subdevice. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-3-5cdf0c5db50a@weissschuh.netSigned-off-by:
-
Thomas Weißschuh authored
Add ChromeOS EC-based charge control as EC subdevice. Signed-off-by:
-
Abel Vesa authored
Add bindings for SMB2360 PMIC. This PMIC is found in boards like X1 Elite CRD and QCP. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240527-smb2360-bindings-mfd-qcom-spmi-pmic-v1-1-31a2c051529c@linaro.orgSigned-off-by:
-
Hans de Goede authored
The primary use of the CRC PMIC's PWM is for LCD panel backlight control by the i915 driver. Due to its complexity the probe() function of the i915 driver does not support -EPROBE_DEFER handling. So far the pwm-crc driver must be built into the kernel to ensure that the pwm_get() done by the i915 driver succeeds at once (rather then returning -EPROBE_DEFER). But the PWM core can load the module from pwm_get() if a module-name is provided in the pwm_lookup associated with the consumer device. Switch to using PWM_LOOKUP_WITH_MODULE() for the lookup added for the Intel integrated GPU, so that the PWM core can load the module from pwm_get() as needed allowing the pwm-crc driver to be safely built as module. This has been successfully tested on an Asus T100TAM with pwm-crc build as a module. Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11081Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240527114950.326659-1-hdegoede@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Add a new mediatek,mt8365-scpsys compatible, for the SCPSYS syscon block having power controller. Previously the DTS was re-using SYSCFG compatible, but that does not seem right, because SYSCFG does not have children. Signed-off-by:
Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by:
-
AngeloGioacchino Del Regno authored
Add a compatible string for the scpsys block found in the MediaTek MT8188 SoC. Signed-off-by:
-
Aradhya Bhatia authored
Add TI DSS OLDI-IO control registers compatible for AM625 DSS. This is a region of 10 32bit registers found in the TI AM625 CTRL_MMR0 register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the OLDI TXes controller node. [0]: https://www.ti.com/lit/pdf/spruiv7Signed-off-by:
Aradhya Bhatia <a-bhatia1@ti.com> Acked-by:
-
Uwe Kleine-König authored
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240510211011.2273978-2-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Andy Shevchenko authored
linux/gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by:
-
Andy Shevchenko authored
linux/gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by:
-
Simon Horman authored
Several comments in idt8a340_reg.h start with '/**', which denotes the start of a Kernel doc, but are otherwise not Kernel docs. Resolve this conflict by starting these comments with '/*' instead. Flagged by ./scripts/kernel-doc -none Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240507-clockmatrix-kernel-doc-v2-1-3138d74192dd@kernel.orgSigned-off-by:
-
Lee Jones authored
-
Lee Jones authored
-
Lee Jones authored
-
Lee Jones authored
-
Lee Jones authored
-
Lee Jones authored
-
Lee Jones authored
-
- 28 Jun, 2024 10 commits
-
-
Karel Balej authored
Add an entry to MAINTAINERS for the Marvell 88PM886 PMIC MFD, onkey and regulator drivers. Signed-off-by:
Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240531175109.15599-6-balejk@matfyz.czSigned-off-by:
-
Karel Balej authored
Marvell 88PM886 PMIC provides onkey among other things. Add client driver to handle it. The driver currently only provides a basic support omitting additional functions found in the vendor version, such as long onkey and GPIO integration. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20240531175109.15599-5-balejk@matfyz.czSigned-off-by:
-
Karel Balej authored
Support the LDO and buck regulators of the Marvell 88PM886 PMIC. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240531175109.15599-4-balejk@matfyz.czSigned-off-by:
-
Karel Balej authored
Marvell 88PM886 is a PMIC which provides various functions such as onkey, battery, charger and regulators. It is found for instance in the samsung,coreprimevelte smartphone with which this was tested. Implement basic support to allow for the use of regulators and onkey. Signed-off-by:
-
Karel Balej authored
Marvell 88PM886 is a PMIC with several subdevices such as onkey, regulators or battery and charger. It comes in at least two revisions, A0 and A1 -- only A1 is described here at the moment. Signed-off-by:
-
James Ogletree authored
Introduce support for Cirrus Logic Device CS40L50: a haptic driver with waveform memory, integrated DSP, and closed-loop algorithms. The ASoC driver enables I2S streaming to the device. Reviewed-by:
David Rhodes <drhodes@opensource.cirrus.com> Signed-off-by:
James Ogletree <jogletre@opensource.cirrus.com> Reviewed-by:
Jeff LaBundy <jeff@labundy.com> Reviewed-by:
Ricardo Rivera-Matos <rriveram@opensource.cirrus.com> Reviewed-by:
-
James Ogletree authored
Introduce support for Cirrus Logic Device CS40L50: a haptic driver with waveform memory, integrated DSP, and closed-loop algorithms. The input driver provides the interface for control of haptic effects through the device. Signed-off-by:
-
James Ogletree authored
Introduce support for Cirrus Logic Device CS40L50: a haptic driver with waveform memory, integrated DSP, and closed-loop algorithms. The MFD component registers and initializes the device. Signed-off-by:
-
James Ogletree authored
CS40L50 is a haptic driver with waveform memory, integrated DSP, and closed-loop algorithms. Add a YAML DT binding document for this device. Reviewed-by:
-
James Ogletree authored
A write sequence is a sequence of register addresses and values executed by some Cirrus DSPs following certain power state transitions. Add support for Cirrus drivers to update or add to a write sequence present in firmware. Reviewed-by:
-
- 27 Jun, 2024 2 commits
-
-
Matti Vaittinen authored
Add maintainer entries for ROHM BD96801 a.k.a 'scalable PMIC' drivers to be reviewed by ROHM people. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/5ff9616567983611ea0b07a91403ea848451a339.1719473802.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
Introduce driver for WDG block on ROHM BD96801 scalable PMIC. This driver only supports watchdog with I2C feeding and delayed response detection. Whether the watchdog toggles PRSTB pin or just causes an interrupt can be configured via device-tree. The BD96801 PMIC HW supports also window watchdog (too early feeding detection) and Q&A mode. These are not supported by this driver. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/bb3a49d606e793a61b0c033170ff2a9f30f3c2a5.1719473802.git.mazziesaccount@gmail.comSigned-off-by:
-
