In case of error when adding a new rule that refers to an anonymous set,
deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE.
Thus, the lookup expression marks anonymous sets as inactive in the next
generation to ensure it is not reachable in this transaction anymore and
decrement the set refcount as introduced by c1592a89 ("netfilter:
nf_tables: deactivate anonymous set from preparation phase"). The abort
step takes care of undoing the anonymous set.

This is also consistent with rule deletion, where NFT_TRANS_PREPARE is
used. Note that this error path is exercised in the preparation step of
the commit protocol. This patch replaces nf_tables_rule_release() by the
deactivate and destroy calls, this time with NFT_TRANS_PREPARE.

Due to this incorrect error handling, it is possible to access a
dangling pointer to the anonymous set that remains in the transaction
list.

[1009.379054] BUG: KASAN: use-after-free in nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379106] Read of size 8 at addr ffff88816c4c8020 by task nft-rule-add/137110
[1009.379116] CPU: 7 PID: 137110 Comm: nft-rule-add Not tainted 6.4.0-rc4+ #256
[1009.379128] Call Trace:
[1009.379132]  <TASK>
[1009.379135]  dump_stack_lvl+0x33/0x50
[1009.379146]  ? nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379191]  print_address_description.constprop.0+0x27/0x300
[1009.379201]  kasan_report+0x107/0x120
[1009.379210]  ? nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379255]  nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379302]  nft_lookup_init+0xa5/0x270 [nf_tables]
[1009.379350]  nf_tables_newrule+0x698/0xe50 [nf_tables]
[1009.379397]  ? nf_tables_rule_release+0xe0/0xe0 [nf_tables]
[1009.379441]  ? kasan_unpoison+0x23/0x50
[1009.379450]  nfnetlink_rcv_batch+0x97c/0xd90 [nfnetlink]
[1009.379470]  ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
[1009.379485]  ? __alloc_skb+0xb8/0x1e0
[1009.379493]  ? __alloc_skb+0xb8/0x1e0
[1009.379502]  ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[1009.379509]  ? unwind_get_return_address+0x2a/0x40
[1009.379517]  ? write_profile+0xc0/0xc0
[1009.379524]  ? avc_lookup+0x8f/0xc0
[1009.379532]  ? __rcu_read_unlock+0x43/0x60

Fixes: 958bee14 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If caller reports ENOMEM, then stop iterating over the batch and send a
single netlink message to userspace to report OOM.

Fixes: cbb8125e ("netfilter: nfnetlink: deliver netlink errors on batch completion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The pipapo set backend follows copy-on-update approach, maintaining one
clone of the existing datastructure that is being updated. The clone
and current datastructures are swapped via rcu from the commit step.

The existing integration with the commit protocol is flawed because
there is no operation to clean up the clone if the transaction is
aborted. Moreover, the datastructure swap happens on set element
activation.

This patch adds two new operations for sets: commit and abort, these new
operations are invoked from the commit and abort steps, after the
transactions have been digested, and it updates the pipapo set backend
to use it.

This patch adds a new ->pending_update field to sets to maintain a list
of sets that require this new commit and abort operations.

Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fixes to debugfs registration
 - Fix use-after-free in hci_remove_ltk/hci_remove_irk
 - Fixes to ISO channel support
 - Fix missing checks for invalid L2CAP DCID
 - Fix l2cap_disconnect_req deadlock
 - Add lock to protect HCI_UNREGISTER

* tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: L2CAP: Add missing checks for invalid DCID
  Bluetooth: ISO: use correct CIS order in Set CIG Parameters event
  Bluetooth: ISO: don't try to remove CIG if there are bound CIS left
  Bluetooth: Fix l2cap_disconnect_req deadlock
  Bluetooth: hci_qca: fix debugfs registration
  Bluetooth: fix debugfs registration
  Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER
  Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk
  Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG
  Bluetooth: ISO: consider right CIS when removing CIG at cleanup
====================

Link: https://lore.kernel.org/r/20230606003454.2392552-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing nul-check in basechain hook netlink dump path, from Gavrilov Ilia.

2) Fix bitwise register tracking, from Jeremy Sowden.

3) Null pointer dereference when accessing conntrack helper,
   from Tijs Van Buggenhout.

4) Add schedule point to ipset's call_ad, from Kuniyuki Iwashima.

5) Incorrect boundary check when building chain blob.

* tag 'nf-23-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: out-of-bound check in chain blob
  netfilter: ipset: Add schedule point in call_ad().
  netfilter: conntrack: fix NULL pointer dereference in nf_confirm_cthelper
  netfilter: nft_bitwise: fix register tracking
  netfilter: nf_tables: Add null check for nla_nest_start_noflag() in nft_dump_basechain_hook()
====================

Link: https://lore.kernel.org/r/20230606225851.67394-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.4

Both rtw88 and rtw89 have a 802.11 powersave fix for a regression
introduced in v6.0. mt76 fixes a race and a null pointer dereference.
iwlwifi fixes an issue where not enough memory was allocated for a
firmware event. And finally the stack has several smaller fixes all
over.

* tag 'wireless-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: fix locking in regulatory disconnect
  wifi: cfg80211: fix locking in sched scan stop work
  wifi: iwlwifi: mvm: Fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
  wifi: mac80211: fix switch count in EMA beacons
  wifi: mac80211: don't translate beacon/presp addrs
  wifi: mac80211: mlme: fix non-inheritence element
  wifi: cfg80211: reject bad AP MLD address
  wifi: mac80211: use correct iftype HE cap
  wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi()
  wifi: rtw89: remove redundant check of entering LPS
  wifi: rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
  wifi: rtw88: correct PS calculation for SUPPORTS_DYNAMIC_PS
  wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
====================

Link: https://lore.kernel.org/r/20230606150817.EC133C433D2@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 699b045a ("net: virtio_net: notifications coalescing
support") added coalescing command support for virtio_net. However,
the coalesce commands are using buffers on the stack, which is causing
the device to see DMA errors. There should also be a complaint from
check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
coalesce params from the control_buf struct, which aligns with other
commands.

Cc: stable@vger.kernel.org
Fixes: 699b045a ("net: virtio_net: notifications coalescing support")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20230605195925.51625-1-brett.creeley@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 523847df ("pds_core: add devcmd device interfaces") included
initial support for FW recovery detection. Unfortunately, the ordering
in pdsc_is_fw_good() was incorrect, which was causing FW recovery to be
undetected by the driver. Fix this by making sure to update the cached
fw_status by calling pdsc_is_fw_running() before setting the local FW
gen.

Fixes: 523847df ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605195116.49653-1-brett.creeley@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We missed that tcp_gso_segment() was assuming skb->len was smaller than 65535 :

oldlen = (u16)~skb->len;

This part came with commit 0718bcc0 ("[NET]: Fix CHECKSUM_HW GSO problems.")

This leads to wrong TCP checksum.

Adapt the code to accept arbitrary packet length.

v2:
  - use two csum_add() instead of csum_fold() (Alexander Duyck)
  - Change delta type to __wsum to reduce casts (Alexander Duyck)

Fixes: 09f3d1a3 ("ipv6/gso: remove temporary HBH/jumbo header")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605161647.3624428-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.

The Source Routing Header (SRH) has the following format:

  0                   1                   2                   3
  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  |  Next Header  |  Hdr Ext Len  | Routing Type  | Segments Left |
  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  | CmprI | CmprE |  Pad  |               Reserved                |
  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  |                                                               |
  .                                                               .
  .                        Addresses[1..n]                        .
  .                                                               .
  |                                                               |
  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

The originator of an SRH places the first hop's IPv6 address in the IPv6
header's IPv6 Destination Address and the second hop's IPv6 address as
the first address in Addresses[1..n].

The CmprI and CmprE fields indicate the number of prefix octets that are
shared with the IPv6 Destination Address.  When CmprI or CmprE is not 0,
Addresses[1..n] are compressed as follows:

  1..n-1 : (16 - CmprI) bytes
       n : (16 - CmprE) bytes

Segments Left indicates the number of route segments remaining.  When the
value is not zero, the SRH is forwarded to the next hop.  Its address
is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6
Destination Address.

When Segment Left is greater than or equal to 2, the size of SRH is not
changed because Addresses[1..n-1] are decompressed and recompressed with
CmprI.

OTOH, when Segment Left changes from 1 to 0, the new SRH could have a
different size because Addresses[1..n-1] are decompressed with CmprI and
recompressed with CmprE.

Let's say CmprI is 15 and CmprE is 0.  When we receive SRH with Segment
Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has
16 bytes.  When Segment Left is 1, Addresses[1..n-1] is decompressed to
16 bytes and not recompressed.  Finally, the new SRH will need more room
in the header, and the size is (16 - 1) * (n - 1) bytes.

Here the max value of n is 255 as Segment Left is u8, so in the worst case,
we have to allocate 3825 bytes in the skb headroom.  However, now we only
allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7
bytes).  If the decompressed size overflows the room, skb_push() hits BUG()
below [0].

Instead of allocating the fixed buffer for every packet, let's allocate
enough headroom only when we receive SRH with Segment Left 1.

[0]:
skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo
kernel BUG at net/core/skbuff.c:200!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_panic (net/core/skbuff.c:200)
Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90000003da0 EFLAGS: 00000246
RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540
RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff
R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800
R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190
FS:  00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
 <IRQ>
 skb_push (net/core/skbuff.c:210)
 ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718)
 ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
 ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483)
 __netif_receive_skb_one_core (net/core/dev.c:5494)
 process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934)
 __napi_poll (net/core/dev.c:6496)
 net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696)
 __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
 do_softirq (kernel/softirq.c:472 kernel/softirq.c:459)
 </IRQ>
 <TASK>
 __local_bh_enable_ip (kernel/softirq.c:396)
 __dev_queue_xmit (net/core/dev.c:4272)
 ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134)
 rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
 sock_sendmsg (net/socket.c:724 net/socket.c:747)
 __sys_sendto (net/socket.c:2144)
 __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152)
 do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f453a138aea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea
RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003
RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b
 </TASK>
Modules linked in:

Fixes: 8610c7c6 ("net: ipv6: add support for rpl sr exthdr")
Reported-by: Max VA
Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-deathSigned-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Working on the code gen for C reveals typos in the ethtool spec
as the compiler tries to find the names in the existing uAPI
header. Fix the mistakes.

Fixes: a353318e ("tools: ynl: populate most of the ethtool spec")
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230605233257.843977-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add current size of rule expressions to the boundary check.

Fixes: 2c865a8a ("netfilter: nf_tables: add rule blob layout")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

syzkaller found a repro that causes Hung Task [0] with ipset.  The repro
first creates an ipset and then tries to delete a large number of IPs
from the ipset concurrently:

  IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187
  IPSET_ATTR_CIDR        : 2

The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET)
held, and other threads wait for it to be released.

Previously, the same issue existed in set->variant->uadt() that could run
so long under ip_set_lock(set).  Commit 5e29dc36 ("netfilter: ipset:
Rework long task execution when adding/deleting entries") tried to fix it,
but the issue still exists in the caller with another mutex.

While adding/deleting many IPs, we should release the CPU periodically to
prevent someone from abusing ipset to hang the system.

Note we need to increment the ipset's refcnt to prevent the ipset from
being destroyed while rescheduling.

[0]:
INFO: task syz-executor174:268 blocked for more than 143 seconds.
      Not tainted 6.4.0-rc1-00145-gba79e9a7 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor174 state:D stack:0     pid:268   ppid:260    flags:0x0000000d
Call trace:
 __switch_to+0x308/0x714 arch/arm64/kernel/process.c:556
 context_switch kernel/sched/core.c:5343 [inline]
 __schedule+0xd84/0x1648 kernel/sched/core.c:6669
 schedule+0xf0/0x214 kernel/sched/core.c:6745
 schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804
 __mutex_lock_common kernel/locking/mutex.c:679 [inline]
 __mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747
 __mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035
 mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286
 nfnl_lock net/netfilter/nfnetlink.c:98 [inline]
 nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295
 netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546
 nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658
 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
 netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365
 netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg net/socket.c:747 [inline]
 ____sys_sendmsg+0x4b8/0x810 net/socket.c:2503
 ___sys_sendmsg net/socket.c:2557 [inline]
 __sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586
 __do_sys_sendmsg net/socket.c:2595 [inline]
 __se_sys_sendmsg net/socket.c:2593 [inline]
 __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593
 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
 invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52
 el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142
 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637
 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: a7b4f989 ("netfilter: ipset: IP set core support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

An nf_conntrack_helper from nf_conn_help may become NULL after DNAT.

Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack
helper, is DNAT'ed to another destination port (e.g. 1730), while
nfqueue is being used for final acceptance (e.g. snort).

This happenned after transition from kernel 4.14 to 5.10.161.

Workarounds:
 * keep the same port (1720) in DNAT
 * disable nfqueue
 * disable/unload h323 NAT helper

$ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log
BUG: kernel NULL pointer dereference, address: 0000000000000084
[..]
RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack
[..]
nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue
nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue
nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink
[..]

Fixes: ee04805f ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Tijs Van Buggenhout <tijs.van.buggenhout@axsguard.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

At the end of `nft_bitwise_reduce`, there is a loop which is intended to
update the bitwise expression associated with each tracked destination
register.  However, currently, it just updates the first register
repeatedly.  Fix it.

Fixes: 34cc9e52 ("netfilter: nf_tables: cancel tracking for clobbered destination registers")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The nla_nest_start_noflag() function may fail and return NULL;
the return value needs to be checked.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: d54725cd ("netfilter: nf_tables: support for multiple devices per netdev hook")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This should use wiphy_lock() now instead of requiring the
RTNL, since __cfg80211_leave() via cfg80211_leave() is now
requiring that lock to be held.

Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This should use wiphy_lock() now instead of acquiring the
RTNL, since cfg80211_stop_sched_scan_req() now needs that.

Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Statistics read through bond interface via sysfs causes
below bug and traces as it triggers the bonding module to
collect the slave device statistics while holding the spinlock,
beneath that qede->qed driver statistics flow gets scheduled out
due to usleep_range() used in PTT acquire logic

[ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021
[ 3673.988878] Call Trace:
[ 3673.988891]  dump_stack_lvl+0x34/0x44
[ 3673.988908]  __schedule_bug.cold+0x47/0x53
[ 3673.988918]  __schedule+0x3fb/0x560
[ 3673.988929]  schedule+0x43/0xb0
[ 3673.988932]  schedule_hrtimeout_range_clock+0xbf/0x1b0
[ 3673.988937]  ? __hrtimer_init+0xc0/0xc0
[ 3673.988950]  usleep_range+0x5e/0x80
[ 3673.988955]  qed_ptt_acquire+0x2b/0xd0 [qed]
[ 3673.988981]  _qed_get_vport_stats+0x141/0x240 [qed]
[ 3673.989001]  qed_get_vport_stats+0x18/0x80 [qed]
[ 3673.989016]  qede_fill_by_demand_stats+0x37/0x400 [qede]
[ 3673.989028]  qede_get_stats64+0x19/0xe0 [qede]
[ 3673.989034]  dev_get_stats+0x5c/0xc0
[ 3673.989045]  netstat_show.constprop.0+0x52/0xb0
[ 3673.989055]  dev_attr_show+0x19/0x40
[ 3673.989065]  sysfs_kf_seq_show+0x9b/0xf0
[ 3673.989076]  seq_read_iter+0x120/0x4b0
[ 3673.989087]  new_sync_read+0x118/0x1a0
[ 3673.989095]  vfs_read+0xf3/0x180
[ 3673.989099]  ksys_read+0x5f/0xe0
[ 3673.989102]  do_syscall_64+0x3b/0x90
[ 3673.989109]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3673.989115] RIP: 0033:0x7f8467d0b082
[ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082
[ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003
[ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00
[ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0
[ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05
[ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G        W  OE

Fix this by collecting the statistics asynchronously from a periodic
delayed work scheduled at default stats coalescing interval and return
the recent copy of statisitcs from .ndo_get_stats64(), also add ability
to configure/retrieve stats coalescing interval using below commands -

ethtool -C ethx stats-block-usecs <val>
ethtool -c ethx

Fixes: 133fac0e ("qede: Add basic ethtool support")
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

kmemdup() at line 2735 is not duplicating enough memory for
notif->tid_tear_down and notif->station_id. As it only duplicates
612 bytes: up to offsetofend(struct iwl_wowlan_info_notif,
received_beacons), this is the range of [0, 612) bytes.

2735	notif = kmemdup(notif_v1,
2736			offsetofend(struct iwl_wowlan_info_notif,
2737				    received_beacons),
2738			GFP_ATOMIC);

which evidently does not cover bytes 612 and 613 for members
tid_tear_down and station_id in struct iwl_wowlan_info_notif.
See below:

$ pahole -C iwl_wowlan_info_notif drivers/net/wireless/intel/iwlwifi/mvm/d3.o
struct iwl_wowlan_info_notif {
	struct iwl_wowlan_gtk_status_v3 gtk[2];          /*     0   488 */
	/* --- cacheline 7 boundary (448 bytes) was 40 bytes ago --- */
	struct iwl_wowlan_igtk_status igtk[2];           /*   488    80 */
	/* --- cacheline 8 boundary (512 bytes) was 56 bytes ago --- */
	__le64                     replay_ctr;           /*   568     8 */
	/* --- cacheline 9 boundary (576 bytes) --- */
	__le16                     pattern_number;       /*   576     2 */
	__le16                     reserved1;            /*   578     2 */
	__le16                     qos_seq_ctr[8];       /*   580    16 */
	__le32                     wakeup_reasons;       /*   596     4 */
	__le32                     num_of_gtk_rekeys;    /*   600     4 */
	__le32                     transmitted_ndps;     /*   604     4 */
	__le32                     received_beacons;     /*   608     4 */
	u8                         tid_tear_down;        /*   612     1 */
	u8                         station_id;           /*   613     1 */
	u8                         reserved2[2];         /*   614     2 */

	/* size: 616, cachelines: 10, members: 13 */
	/* last cacheline: 40 bytes */
};

Therefore, when the following assignments take place, actually no memory
has been allocated for those objects:

2743	notif->tid_tear_down = notif_v1->tid_tear_down;
2744	notif->station_id = notif_v1->station_id;

Fix this by allocating space for the whole notif object and zero out the
remaining space in memory after member station_id.

This also fixes the following -Warray-bounds issues:
 CC      drivers/net/wireless/intel/iwlwifi/mvm/d3.o
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2743:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
 2743 |                         notif->tid_tear_down = notif_v1->tid_tear_down;
      |
                 from drivers/net/wireless/intel/iwlwifi/mvm/d3.c:7:
In function ‘kmemdup’,
    inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
  765 |         return __real_kmemdup(p, size, gfp);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2744:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
 2744 |                         notif->station_id = notif_v1->station_id;
      |                              ^~
In function ‘kmemdup’,
    inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
  765 |         return __real_kmemdup(p, size, gfp);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Link: https://github.com/KSPP/linux/issues/306
Fixes: 905d50dd ("wifi: iwlwifi: mvm: support wowlan info notification version 2")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/ZHpGN555FwAKGduH@workSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Currently, whenever an EMA beacon is formed, due to is_template
argument being false from the caller, the switch count is always
decremented once which is wrong.

Also if switch count is equal to profile periodicity, this makes
the switch count to reach till zero which triggers a WARN_ON_ONCE.

[  261.593915] CPU: 1 PID: 800 Comm: kworker/u8:3 Not tainted 5.4.213 #0
[  261.616143] Hardware name: Qualcomm Technologies, Inc. IPQ9574
[  261.622666] Workqueue: phy0 ath12k_get_link_bss_conf [ath12k]
[  261.629771] pstate: 60400005 (nZCv daif +PAN -UAO)
[  261.635595] pc : ieee80211_next_txq+0x1ac/0x1b8 [mac80211]
[  261.640282] lr : ieee80211_beacon_update_cntdwn+0x64/0xb4 [mac80211]
[...]
[  261.729683] Call trace:
[  261.734986]  ieee80211_next_txq+0x1ac/0x1b8 [mac80211]
[  261.737156]  ieee80211_beacon_cntdwn_is_complete+0xa28/0x1194 [mac80211]
[  261.742365]  ieee80211_beacon_cntdwn_is_complete+0xef4/0x1194 [mac80211]
[  261.749224]  ieee80211_beacon_get_template_ema_list+0x38/0x5c [mac80211]
[  261.755908]  ath12k_get_link_bss_conf+0xf8/0x33b4 [ath12k]
[  261.762590]  ath12k_get_link_bss_conf+0x390/0x33b4 [ath12k]
[  261.767881]  process_one_work+0x194/0x270
[  261.773346]  worker_thread+0x200/0x314
[  261.777514]  kthread+0x140/0x150
[  261.781158]  ret_from_fork+0x10/0x18

Fix this issue by making the is_template argument as true when fetching
the EMA beacons.

Fixes: bd54f3c2 ("wifi: mac80211: generate EMA beacons in AP mode")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://lore.kernel.org/r/20230531062012.4537-1-quic_adisi@quicinc.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Don't do link address translation for beacons and probe responses,
this leads to reporting multiple scan list entries for the same AP
(one with the MLD address) which just breaks things.

We might need to extend this in the future for some other (action)
frames that aren't MLD addressed.

Fixes: 42fb9148 ("wifi: mac80211: do link->MLD address translation on RX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.62adead1b43a.Ifc25eed26ebf3b269f60b1ec10060156d0e7ec0d@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

There were two bugs when creating the non-inheritence
element:
 1) 'at_extension' needs to be declared outside the loop,
    otherwise the value resets every iteration and we
    can never really switch properly
 2) 'added' never got set to true, so we always cut off
    the extension element again at the end of the function

This shows another issue that we might add a list but no
extension list, but we need to make the extension list a
zero-length one in that case.

Fix all these issues. While at it, add a comment explaining
the trim.

Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3addaa5c4782.If3a78f9305997ad7ef4ba7ffc17a8234c956f613@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When trying to authenticate, if the AP MLD address isn't
a valid address, mac80211 can throw a warning. Avoid that
by rejecting such addresses.

Fixes: d648c230 ("wifi: nl80211: support MLO in auth/assoc")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.89188912bd1d.I8dbc6c8ee0cb766138803eec59508ef4ce477709@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

We already check that the right iftype capa exists,
but then don't use it. Assign it to a variable so we
can actually use it, and then do that.

Fixes: bac2fd3d ("mac80211: remove use of ieee80211_get_he_sta_cap()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.0e908e5c5fdd.Iac142549a6144ac949ebd116b921a59ae5282735@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When receiving a connect response we should make sure that the DCID is
within the valid range and that we don't already have another channel
allocated for the same DCID.
Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION
Version 5.4 | Vol 3, Part A, Page 1046).

Fixes: 40624183 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The order of CIS handle array in Set CIG Parameters response shall match
the order of the CIS_ID array in the command (Core v5.3 Vol 4 Part E Sec
7.8.97).  We send CIS_IDs mainly in the order of increasing CIS_ID (but
with "last" CIS first if it has fixed CIG_ID).  In handling of the
reply, we currently assume this is also the same as the order of
hci_conn in hdev->conn_hash, but that is not true.

Match the correct hci_conn to the correct handle by matching them based
on the CIG+CIS combination.  The CIG+CIS combination shall be unique for
ISO_LINK hci_conn at state >= BT_BOUND, which we maintain in
hci_le_set_cig_params.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Consider existing BOUND & CONNECT state CIS to block CIG removal.
Otherwise, under suitable timing conditions we may attempt to remove CIG
while Create CIS is pending, which fails.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

L2CAP assumes that the locks conn->chan_lock and chan->lock are
acquired in the order conn->chan_lock, chan->lock to avoid
potential deadlock.
For example, l2sock_shutdown acquires these locks in the order:
  mutex_lock(&conn->chan_lock)
  l2cap_chan_lock(chan)

However, l2cap_disconnect_req acquires chan->lock in
l2cap_get_chan_by_scid first and then acquires conn->chan_lock
before calling l2cap_chan_del. This means that these locks are
acquired in unexpected order, which leads to potential deadlock:
  l2cap_chan_lock(c)
  mutex_lock(&conn->chan_lock)

This patch releases chan->lock before acquiring the conn_chan_lock
to avoid the potential deadlock.

Fixes: a2a9339e ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Since commit 3e4be65e ("Bluetooth: hci_qca: Add poweroff support
during hci down for wcn3990"), the setup callback which registers the
debugfs interface can be called multiple times.

This specifically leads to the following error when powering on the
controller:

	debugfs: Directory 'ibs' with parent 'hci0' already present!

Add a driver flag to avoid trying to register the debugfs interface more
than once.

Fixes: 3e4be65e ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990")
Cc: stable@vger.kernel.org	# 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Since commit ec6cef9c ("Bluetooth: Fix SMP channel registration for
unconfigured controllers") the debugfs interface for unconfigured
controllers will be created when the controller is configured.

There is however currently nothing preventing a controller from being
configured multiple time (e.g. setting the device address using btmgmt)
which results in failed attempts to register the already registered
debugfs entries:

	debugfs: File 'features' in directory 'hci0' already present!
	debugfs: File 'manufacturer' in directory 'hci0' already present!
	debugfs: File 'hci_version' in directory 'hci0' already present!
	...
	debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present!

Add a controller flag to avoid trying to register the debugfs interface
more than once.

Fixes: ec6cef9c ("Bluetooth: Fix SMP channel registration for unconfigured controllers")
Cc: stable@vger.kernel.org      # 4.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix
potential race when HCI_UNREGISTER is set after the flag is tested in
hci_cmd_sync_queue.

Fixes: 0b94f265 ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Similar to commit 0f7d9b31 ("netfilter: nf_tables: fix use-after-free
in nft_set_catchall_destroy()"). We can not access k after kfree_rcu()
call.

Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Make CIG auto-allocation to select the first CIG_ID that is still
configurable. Also use correct CIG_ID range (see Core v5.3 Vol 4 Part E
Sec 7.8.97 p.2553).

Previously, it would always select CIG_ID 0 regardless of anything,
because cis_list with data.cis == 0xff (BT_ISO_QOS_CIS_UNSET) would not
count any CIS. Since we are not adding CIS here, use find_cis instead.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When looking for CIS blocking CIG removal, consider only the CIS with
the right CIG ID. Don't try to remove CIG with unset CIG ID.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Mat Martineau says:

====================
mptcp: Fixes for address advertisement

Patches 1 and 2 allow address advertisements to be removed without
affecting current connected subflows, and updates associated self tests.

Patches 3 and 4 correctly track (and allow removal of) addresses that
were implicitly announced as part of subflow creation. Also updates
associated self tests.

Patch 5 makes subflow and address announcement counters work consistently
between the userspace and in-kernel path managers.
====================
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Increase pm subflows counter on both server side and client side when
userspace pm creates a new subflow, and decrease the counter when it
closes a subflow.

Increase add_addr_signaled counter in mptcp_nl_cmd_announce() when the
address is announced by userspace PM.

This modification is similar to how the in-kernel PM is updating the
counter: when additional subflows are created/removed.

Fixes: 9ab4807c ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/329
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

To align with what is done by the in-kernel PM, update userspace pm
subflow selftests, by sending the a remove_addrs command together
before the remove_subflows command. This will get a RM_ADDR in
chk_rm_nr().

Fixes: d9a4594e ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Fixes: 5e986ec4 ("selftests: mptcp: userspace pm subflow tests")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the address into userspace_pm_local_addr_list when the subflow is
created. Make sure it can be found in mptcp_nl_cmd_remove(). And delete
it in the new helper mptcp_userspace_pm_delete_local_addr().

By doing this, the "REMOVE" command also works with subflows that have
been created via the "SUB_CREATE" command instead of restricting to
the addresses that have been announced via the "ANNOUNCE" command.

Fixes: d9a4594e ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is linked to the previous commit ("mptcp: only send RM_ADDR in
nl_cmd_remove").

To align with what is done by the in-kernel PM, update userspace pm addr
selftests, by sending a remove_subflows command together after the
remove_addrs command.

Fixes: d9a4594e ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Fixes: 97040cf9 ("selftests: mptcp: userspace pm address tests")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>