- 11 Jun, 2009 20 commits
-
-
Alex Chiang authored
Convert uses of pci_find_slot to modern API. In the conversion sites, we end up calling pci_dev_put() right away. This may seem like it misses the entire point of doing something like pci_get_bus_and_slot(), since we drop the reference so soon, but it turns out we don't actually do much with the returned pci_dev. I plan on untangling cpqphp further, but clearly cpqphp never worried too much about a properly refcounted pci_dev anyway. For now, this conversion seems reasonable, as it gets rid of the last in-tree caller of pci_find_slot. Signed-off-by:
Alex Chiang <achiang@hp.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Alex Chiang authored
Eliminate this warning: warning: return discards qualifiers from pointer target type Signed-off-by:
-
Alex Chiang authored
I have no clue what the original intent here was, but the code as written is useless. The old dbg() statement above the old callsite might lead one to think that at one point, there was supposed to be some recursion, but any sense of sanity here has been lost to the ravages of time. Signed-off-by:
-
Alex Chiang authored
Instead of making multiple calls to pcibios_get_irq_routing_table, let's just do it once and save the answer. The reason we were making multiple calls is because we liked to calculate its length and perform some loop over it. Instead of open-coding the length calculation every time, provide it in an inline helper function. Finally, since pci_print_IRQ_route() is used only for debug, let's only do it when cpqhp_debug is set. Signed-off-by:
-
Alex Chiang authored
Handle an empty slot at the top of the loop, and continue early. This allows us to un-indent the rest of the function by one level. Signed-off-by:
-
Alex Chiang authored
Clean up style, whitespace in cpqphp_pci.c Signed-off-by:
-
Alex Chiang authored
Check for an empty slot, and return early if so. This allows us to un-indent the rest of the function by one level. Signed-off-by:
-
Alex Chiang authored
Style and whitespace cleanups, no functional change. Signed-off-by:
-
Alex Chiang authored
Apply DeMorgan's theorem: if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) turns into if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) Now we can bail out early from the function if the controller is not supported. This allows us to un-indent the remainder of the function quite a bit and make it much more readable. Fix up some extra braces, and un-indent the 'case' labels in the switch statement as per CodingStyle. No functional change. Signed-off-by:
-
Alex Chiang authored
Clean up style and eliminate superfluous braces and parens. No functional change. Signed-off-by:
-
Alex Chiang authored
Impact: refactor Refactor code to follow convention more closely and eliminate the need for some useless prototypes. No functional change. Signed-off-by:
-
Alex Chiang authored
Clean up cpqphp.h to follow 80 column convention. Signed-off-by:
-
Alex Chiang authored
Fix up comments from C++ to C-style, wrapping if necessary, etc. Signed-off-by:
-
Alex Chiang authored
Clean up all stray whitespace issues, such as trailing whitespace, spaces before tabs, etc. and whatever else vim's c_space_errors highlights in red. Signed-off-by:
-
Yinghai Lu authored
We could run out of space under under 4g, but devices under transparent bridges can use 64bit resources, so keep trying on the parent bus until we hit a non-transparent bridge. Impact: better support for assigning unassigned resources Reviewed-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Yinghai Lu authored
We should not assign 64bit ranges to PCI devices that only take 32bit prefetchable addresses. Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge and make the bus resource only have that bit set when all devices under it support 64bit prefetchable memory. Use that flag to allocate resources from that range. Reported-by:
Yannick <yannick.roehlly@free.fr> Reviewed-by:
-
Hidetoshi Seto authored
Impact: cleanup, improve readability Define PCI_MSI_MASK_32/64 for 32/64bit devices, instead of using implicit offset (-4), "PCI_MSI_MASK_BIT - 4" and "PCI_MSI_MASK_BIT". Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
akpm@linux-foundation.org authored
drivers/pci/hotplug/ibmphp_core.c:1414: warning: `ibmphp_exit' defined but not used Signed-off-by:
Zhenwen Xu <helight.xu@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Hidetoshi Seto authored
Impact: cleanup, spec compliance This patch does: - Remove unused msi/msix_enable/disable macros. User should use msi/msix_set_enable() functions instead. - Remove unused msix_mask/unmask/pending macros. These macros are useless because they are not based on any of the PCI Local Bus Specifications properly. It seems that they were written based on a draft of PCI spec, and that the draft was the MSI-X ECN that underwent membership review in September 2002. (* In the draft, the size of a entry in MSI-X table was 64bit, containing 32bit message data and DWORD aligned lower address plus a pending bit and a mask bit.(30+1+1bit) The higher address was placed in MSI-X capability structure and shared by all entries.) - Remove PCI_MSIX_FLAGS_BITMASK. This definition also come from the draft ECN. Signed-off-by:
-
- 10 Jun, 2009 2 commits
-
-
Linus Torvalds authored
-
Peter Botha authored
There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel. mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem. Cc: "Peter Botha" <peterb@goldcircle.co.za> Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Jun, 2009 16 commits
-
-
Jan Kara authored
In commit code, we scan buffers attached to a transaction. During this scan, we sometimes have to drop j_list_lock and then we recheck whether the journal buffer head didn't get freed by journal_try_to_free_buffers(). But checking for buffer_jbd(bh) isn't enough because a new journal head could get attached to our buffer head. So add a check whether the journal head remained the same and whether it's still at the same transaction and list. This is a nasty bug and can cause problems like memory corruption (use after free) or trigger various assertions in JBD code (observed). Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Ian Kent authored
The recent ->lookup() deadlock correction required the directory inode mutex to be dropped while waiting for expire completion. We were concerned about side effects from this change and one has been identified. I saw several error messages. They cause autofs to become quite confused and don't really point to the actual problem. Things like: handle_packet_missing_direct:1376: can't find map entry for (43,1827932) which is usually totally fatal (although in this case it wouldn't be except that I treat is as such because it normally is). do_mount_direct: direct trigger not valid or already mounted /test/nested/g3c/s1/ss1 which is recoverable, however if this problem is at play it can cause autofs to become quite confused as to the dependencies in the mount tree because mount triggers end up mounted multiple times. It's hard to accurately check for this over mounting case and automount shouldn't need to if the kernel module is doing its job. There was one other message, similar in consequence of this last one but I can't locate a log example just now. When checking if a mount has already completed prior to adding a new mount request to the wait queue we check if the dentry is hashed and, if so, if it is a mount point. But, if a mount successfully completed while we slept on the wait queue mutex the dentry must exist for the mount to have completed so the test is not really needed. Mounts can also be done on top of a global root dentry, so for the above case, where a mount request completes and the wait queue entry has already been removed, the hashed test returning false can cause an incorrect callback to the daemon. Also, d_mountpoint() is not sufficient to check if a mount has completed for the multi-mount case when we don't have a real mount at the base of the tree. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Mike Frysinger authored
The massive nommu update (8feae131) resulted in these warnings: ipc/shm.c: In function `sys_shmdt': ipc/shm.c:974: warning: unused variable `size' ipc/shm.c:972: warning: unused variable `next' Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: kvm: fix kvm reboot crash when MAXSMP is used cpumask: alloc zeroed cpumask for static cpumask_var_ts cpumask: introduce zalloc_cpumask_var
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: bsg: setting rq->bio to NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: cls_cgroup: Fix oops when user send improperly 'tc filter add' request r8169: fix crash when large packets are received
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md/raid5: fix bug in reshape code when chunk_size decreases. md/raid5 - avoid deadlocks in get_active_stripe during reshape md/raid5: use conf->raid_disks in preference to mddev->raid_disk
-
FUJITA Tomonori authored
Due to commit 1cd96c24 ("block: WARN in __blk_put_request() for potential bio leak"), BSG SMP requests get the false warnings: WARNING: at block/blk-core.c:1068 __blk_put_request+0x52/0xc0() This sets rq->bio to NULL to avoid that false warnings. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
Avi Kivity authored
one system was found there is crash during reboot then kvm/MAXSMP Sending all processes the KILL signal... done Please stand by while rebooting the system... [ 1721.856538] md: stopping all md devices. [ 1722.852139] kvm: exiting hardware virtualization [ 1722.854601] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1722.872219] IP: [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4 [ 1722.877955] PGD 0 [ 1722.880042] Oops: 0000 [#1] SMP [ 1722.892548] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:2:0/0:2:0:0/vendor [ 1722.900977] CPU 9 [ 1722.912606] Modules linked in: [ 1722.914226] Pid: 0, comm: swapper Not tainted 2.6.30-rc7-tip-01843-g2305324-dirty #299 ... [ 1722.932589] RIP: 0010:[<ffffffff8102c6b6>] [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4 [ 1722.942709] RSP: 0018:ffffc900010b6ed8 EFLAGS: 00010046 [ 1722.956121] RAX: 0000000000000000 RBX: ffffc9000e253140 RCX: 0000000000000009 [ 1722.972202] RDX: 000000000000b020 RSI: ffffc900010c3220 RDI: ffffffffffffd790 [ 1722.977399] RBP: ffffc900010b6f08 R08: 0000000000000000 R09: 0000000000000000 [ 1722.995149] R10: 00000000000004b8 R11: 966912b6c78fddbd R12: 0000000000000009 [ 1723.011551] R13: 000000000000b020 R14: 0000000000000009 R15: 0000000000000000 [ 1723.019898] FS: 0000000000000000(0000) GS:ffffc900010b3000(0000) knlGS:0000000000000000 [ 1723.034389] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 1723.041164] CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006e0 [ 1723.056192] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1723.072546] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1723.080562] Process swapper (pid: 0, threadinfo ffff88107e464000, task ffff88047e5a2550) [ 1723.096144] Stack: [ 1723.099071] 0000000000000046 ffffc9000e253168 966912b6c78fddbd ffffc9000e253140 [ 1723.115471] ffff880c7d4304d0 ffffc9000e253168 ffffc900010b6f28 ffffffff81011022 [ 1723.132428] ffffc900010b6f48 966912b6c78fddbd ffffc900010b6f48 ffffffff8100b83b [ 1723.141973] Call Trace: [ 1723.142981] <IRQ> <0> [<ffffffff81011022>] kvm_arch_hardware_disable+0x26/0x3c [ 1723.158153] [<ffffffff8100b83b>] hardware_disable+0x3f/0x55 [ 1723.172168] [<ffffffff810b95f6>] generic_smp_call_function_interrupt+0x76/0x13c [ 1723.178836] [<ffffffff8104cbea>] smp_call_function_interrupt+0x3a/0x5e [ 1723.194689] [<ffffffff81035bf3>] call_function_interrupt+0x13/0x20 [ 1723.199750] <EOI> <0> [<ffffffff814ad3b4>] ? acpi_idle_enter_c1+0xd3/0xf4 [ 1723.217508] [<ffffffff814ad3ae>] ? acpi_idle_enter_c1+0xcd/0xf4 [ 1723.232172] [<ffffffff814ad4bc>] ? acpi_idle_enter_bm+0xe7/0x2ce [ 1723.235141] [<ffffffff81a8d93f>] ? __atomic_notifier_call_chain+0x0/0xac [ 1723.253381] [<ffffffff818c3dff>] ? menu_select+0x58/0xd2 [ 1723.258179] [<ffffffff818c2c9d>] ? cpuidle_idle_call+0xa4/0xf3 [ 1723.272828] [<ffffffff81034085>] ? cpu_idle+0xb8/0x101 [ 1723.277085] [<ffffffff81a80163>] ? start_secondary+0x1bc/0x1d7 [ 1723.293708] Code: b0 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 48 8b 04 cd 30 ee 27 82 49 89 cc 49 89 d5 48 8b 04 10 48 8d b8 90 d7 ff ff <48> 8b 87 70 28 00 00 48 8d 98 90 d7 ff ff eb 16 e8 e9 fe ff ff [ 1723.335524] RIP [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4 [ 1723.342076] RSP <ffffc900010b6ed8> [ 1723.352021] CR2: 0000000000000000 [ 1723.354348] ---[ end trace e2aec53dae150aa1 ]--- it turns out that we need clear cpus_hardware_enabled in that case. Reported-and-tested-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Yinghai Lu authored
These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by:
Yinghai Lu <yinghai.lu@kernel.org> Signed-off-by:
-
Yinghai Lu authored
So can get cpumask_var with cpumask_clear Signed-off-by:
-
Minoru Usui authored
I found a bug in cls_cgroup_change() in cls_cgroup.c. cls_cgroup_change() expected tca[TCA_OPTIONS] was set from user space properly, but tc in iproute2-2.6.29-1 (which I used) didn't set it. In the current source code of tc in git, it set tca[TCA_OPTIONS]. git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git If we always use a newest iproute2 in git when we use cls_cgroup, we don't face this oops probably. But I think, kernel shouldn't panic regardless of use program's behaviour. Signed-off-by:
Minoru Usui <usui@mxm.nes.nec.co.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Michael Tokarev reported receiving a large packet could crash a machine with RTL8169 NIC. ( original thread at http://lkml.org/lkml/2009/6/8/192 ) Problem is this driver tells that NIC frames up to 16383 bytes can be received but provides skb to rx ring allocated with smaller sizes (1536 bytes in case standard 1500 bytes MTU is used) When a frame larger than what was allocated by driver is received, dma transfert can occurs past the end of buffer and corrupt kernel memory. Fix is to tell to NIC what is the maximum size a frame can be. This bug is very old, (before git introduction, linux-2.6.10), and should be backported to stable versions. Reported-by:
Michael Tokarev <mjt@tls.msk.ru> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
-
NeilBrown authored
Now that we support changing the chunksize, we calculate "reshape_sectors" to be the max of number of sectors in old and new chunk size. However there is one please where we still use 'chunksize' rather than 'reshape_sectors'. This causes a reshape that reduces the size of chunks to freeze. Signed-off-by:NeilBrown <neilb@suse.de>
-
NeilBrown authored
md has functionality to 'quiesce' and array so that all pending IO completed and no new IO starts. This is used to achieve a stable state before making internal changes. Currently this quiescing applies equally to normal IO, resync IO, and reshape IO. However there is a problem with applying it to reshape IO. Reshape can have multiple 'stripe_heads' that must be active together. If the quiesce come between allocating the first and the last of such a collection, then we deadlock, as the last will not be allocated until the quiesce is lifted, the quiesce will not be lifted until the first (which has been allocated) gets used, and that first cannot be used until the last is allocated. It is not necessary to inhibit reshape IO when a quiesce is requested. Those places in the code that require a full quiesce will ensure the reshape thread is not running at all. So allow reshape requests to get access to new stripe_heads without being blocked by a 'quiesce'. This only affects in-place reshapes (i.e. where the array does not grow or shrink) and these are only newly supported. So this patch is not needed in earlier kernels. Signed-off-by: -
NeilBrown authored
mddev->raid_disks can be changed and any time by a request from user-space. It is a suggestion as to what number of raid_disks is desired. conf->raid_disks can only be changed by the raid5 module with suitable locks in place. It is a statement as to the current number of raid_disks. There are two places where the latter should be used, but the former is used. This can lead to a crash when reshaping an array. This patch changes to mddev-> to conf-> Signed-off-by:
-
- 08 Jun, 2009 2 commits
-
-
Linus Torvalds authored
Our async work synchronization was broken by "async: make sure independent async domains can't accidentally entangle" (commit d5a877e8), because it would report the wrong lowest active async ID when there was both running and pending async work. This caused things like no being able to read the root filesystem, resulting in missing console devices and inability to run 'init', causing a boot-time panic. This fixes it by properly returning the lowest pending async ID: if there is any running async work, that will have a lower ID than any pending work, and we should _not_ look at the pending work list. There were alternative patches from Jaswinder and James, but this one also cleans up the code by removing the pointless 'ret' variable and the unnecesary testing for an empty list around 'for_each_entry()' (if the list is empty, the for_each_entry() thing just won't execute). Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13474Reported-and-tested-by:
Chris Clayton <chris2553@googlemail.com> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Outline udelay and fix a few issues. MIPS: ioctl.h: Fix headers_check warnings MIPS: Cobalt: PCI bus is always required to obtain the board ID MIPS: Kconfig: Remove "Support for" from Cavium system type MIPS: Sibyte: Honor CONFIG_CMDLINE SSB: BCM47xx: Export ssb_watchdog_timer_set
-
