- 16 Mar, 2017 40 commits
-
-
Oliver Hartkopp authored
commit a06393ed upstream. When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by:
Michael Josenhans <michael.josenhans@web.de> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Helge Deller authored
commit 2ad5d52d upstream. In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin. Solve this problem by using __BITS_PER_LONG instead. Since we now #include asm/bitsperlong.h avoid further potential userspace pollution by moving the #define of SHIFT_PER_LONG to bitops.h which is not exported to userspace. This patch unbreaks compiling qemu on hppa/parisc. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Vineet Gupta authored
commit 9aed02fe upstream. After emulating an unaligned access in delay slot of a branch, we pretend as the delay slot never happened - so return back to actual branch target (or next PC if branch was not taken). Curently we did this by handling STATUS32.DE, we also need to clear the BTA.T bit, which is disregarded when returning from original misaligned exception, but could cause weirdness if it took the interrupt return path (in case interrupt was acive too) One ARC700 customer ran into this when enabling unaligned access fixup for kernel mode accesses as well Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Arnd Bergmann authored
commit 950eabbd upstream. With some gcc versions, we get a warning about the eicon driver, and that currently shows up as the only remaining warning in one of the build bots: In file included from ../drivers/isdn/hardware/eicon/message.c:30:0: eicon/message.c: In function 'mixer_notify_update': eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] The code is easily changed to open-code the unusual PUT_WORD() line causing this to avoid the warning. Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Chuck Lever authored
commit 406dab84 upstream. Lock sequence IDs are bumped in decode_lock by calling nfs_increment_seqid(). nfs_increment_sequid() does not use the seqid_mutating_err() function fixed in commit 059aa734 ("Don't increment lock sequence ID after NFS4ERR_MOVED"). Fixes: 059aa734 ("Don't increment lock sequence ID after ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Xuan Qi <xuan.qi@oracle.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Eric Dumazet authored
commit ff9f8a7c upstream. We perform the conversion between kernel jiffies and ms only when exporting kernel value to user space. We need to do the opposite operation when value is written by user. Only matters when HZ != 1000 Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ander Conselvan de Oliveira authored
commit c34f0786 upstream. In the path where intel_crt_detect_ddc() detects a CRT, if would return true without freeing the edid. Fixes: a2bd1f54 ("drm/i915: check whether we actually received an edid in detect_ddc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-1-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit c96b63a6) Signed-off-by:
-
Lukáš Lalinský authored
commit d9b2997e upstream. Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by:
Lukáš Lalinský <lukas@oxygene.sk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Keno Fischer authored
commit 8310d48b upstream. In commit 19be0eaf ("mm: remove gup_flags FOLL_WRITE games from __get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE after a COW was resolved to setting the (newly introduced) FOLL_COW instead. Simultaneously, the check in gup.c was updated to still allow writes with FOLL_FORCE set if FOLL_COW had also been set. However, a similar check in huge_memory.c was forgotten. As a result, remote memory writes to ro regions of memory backed by transparent huge pages cause an infinite loop in the kernel (handle_mm_fault sets FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is true. While in this state the process is stil SIGKILLable, but little else works (e.g. no ptrace attach, no other signals). This is easily reproduced with the following code (assuming thp are set to always): #include <assert.h> #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <string.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define TEST_SIZE 5 * 1024 * 1024 int main(void) { int status; pid_t child; int fd = open("/proc/self/mem", O_RDWR); void *addr = mmap(NULL, TEST_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr != MAP_FAILED); pid_t parent_pid = getpid(); if ((child = fork()) == 0) { void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr2 != MAP_FAILED); memset(addr2, 'a', TEST_SIZE); pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr); return 0; } assert(child == waitpid(child, &status, 0)); assert(WIFEXITED(status) && WEXITSTATUS(status) == 0); return 0; } Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously to the update in gup.c in the original commit. The same pattern exists in follow_devmap_pmd. However, we should not be able to reach that check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we ever do. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.comSigned-off-by:
Keno Fischer <keno@juliacomputing.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Liping Zhang authored
commit 5ce6b04c upstream. First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127, at nf_log_packet(), so the extra part is useless. Second, after adding a log rule with a very very long prefix, we will fail to dump the nft rules after this _special_ one, but acctually, they do exist. For example: # name_65000=$(printf "%0.sQ" {1..65000}) # nft add rule filter output log prefix "$name_65000" # nft add rule filter output counter # nft add rule filter output counter # nft list chain filter output table ip filter { chain output { type filter hook output priority 0; policy accept; } } So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by:
-
Kinglong Mee authored
commit c929ea0b upstream. After removing sunrpc module, I get many kmemleak information as, unreferenced object 0xffff88003316b1e0 (size 544): comm "gssproxy", pid 2148, jiffies 4294794465 (age 4200.081s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffb0cfb58a>] kmemleak_alloc+0x4a/0xa0 [<ffffffffb03507fe>] kmem_cache_alloc+0x15e/0x1f0 [<ffffffffb0639baa>] ida_pre_get+0xaa/0x150 [<ffffffffb0639cfd>] ida_simple_get+0xad/0x180 [<ffffffffc06054fb>] nlmsvc_lookup_host+0x4ab/0x7f0 [lockd] [<ffffffffc0605e1d>] lockd+0x4d/0x270 [lockd] [<ffffffffc06061e5>] param_set_timeout+0x55/0x100 [lockd] [<ffffffffc06cba24>] svc_defer+0x114/0x3f0 [sunrpc] [<ffffffffc06cbbe7>] svc_defer+0x2d7/0x3f0 [sunrpc] [<ffffffffc06c71da>] rpc_show_info+0x8a/0x110 [sunrpc] [<ffffffffb044a33f>] proc_reg_write+0x7f/0xc0 [<ffffffffb038e41f>] __vfs_write+0xdf/0x3c0 [<ffffffffb0390f1f>] vfs_write+0xef/0x240 [<ffffffffb0392fbd>] SyS_write+0xad/0x130 [<ffffffffb0d06c37>] entry_SYSCALL_64_fastpath+0x1a/0xa9 [<ffffffffffffffff>] 0xffffffffffffffff I found, the ida information (dynamic memory) isn't cleanup. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Fixes: 2f048db4 ("SUNRPC: Add an identifier for struct rpc_clnt") Signed-off-by:
-
Eric Dumazet authored
commit 21b995a9 upstream. Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull(), we must reload any pointer that was related to skb->head (or skb->data), or risk use after free. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
-
Chuck Lever authored
commit 059aa734 upstream. Xuan Qi reports that the Linux NFSv4 client failed to lock a file that was migrated. The steps he observed on the wire: 1. The client sent a LOCK request to the source server 2. The source server replied NFS4ERR_MOVED 3. The client switched to the destination server 4. The client sent the same LOCK request to the destination server with a bumped lock sequence ID 5. The destination server rejected the LOCK request with NFS4ERR_BAD_SEQID RFC 3530 section 8.1.5 provides a list of NFS errors which do not bump a lock sequence ID. However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section 9.1.7, this list has been updated by the addition of NFS4ERR_MOVED. Reported-by:
-
Bjørn Mork authored
commit 5d03a2fd upstream. Yet another laptop vendor rebranded Novatel E371. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Darren Stevens authored
commit af2b7fa1 upstream. prom_init.c calls 'instance-to-package' twice, but the return is not checked during prom_find_boot_cpu(). The result is then passed to prom_getprop(), which could be PROM_ERROR. Add a return check to prevent this. This was found on a pasemi system, where CFE doesn't have a working 'instance-to package' prom call. Before Commit 5c0484e2 ('powerpc: Endian safe trampoline') the area around addr 0 was mostly 0's and this doesn't cause a problem. Once the macro 'FIXUP_ENDIAN' has been added to head_64.S, the low memory area now has non-zero values, which cause the prom_getprop() call to hang. mpe: Also confirmed that under SLOF if 'instance-to-package' did fail with PROM_ERROR we would crash in SLOF. So the bug is not specific to CFE, it's just that other open firmwares don't trigger it because they have a working 'instance-to-package'. Fixes: 5c0484e2 ("powerpc: Endian safe trampoline") Signed-off-by:
Darren Stevens <darren@stevens-zone.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ard Biesheuvel authored
commit 11e3b725 upstream. Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Salvatore Benedetto authored
commit d6040764 upstream. Make sure CRYPTO_ALG_DEAD bit is cleared before proceeding with the algorithm registration. This fixes qat-dh registration when driver is restarted Signed-off-by:
Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by:
-
John Brooks authored
commit 5c113b5e upstream. The DHT22 (AM2302) datasheet specifies that the LOW start pulse should not exceed 20ms. However, observations with an oscilloscope of an RPi Model 2B (rev 1.1) communicating with a DHT22 sensor showed that the driver was consistently sending start pulses longer than 20ms: Kernel 4.7.10-v7+ (n=132): Minimum pulse length: 20.20ms Maximum: 29.84ms Mean: 24.96ms StDev: 2.82ms Sensor response rate: 100% Read success rate: 76% On kernel 4.8, the start pulse was so long that the sensor would not even respond 97% of the time: Kernel 4.8.16-v7+ (n=100): Minimum pulse length: 30.4ms Maximum: 74.4ms Mean: 39.3ms StDev: 10.2ms Sensor response rate: 3% Read success rate: 3% The driver would return ETIMEDOUT and write log messages like this: [ 51.430987] dht11 dht11@0: Only 1 signal edges detected [ 66.311019] dht11 dht11@0: Only 0 signal edges detected Replacing msleep(18) with usleep_range(18000, 20000) made the pulse length sane again and restored responsiveness: Kernel 4.8.16-v7+ with usleep_range (n=123): Minimum pulse length: 18.16ms Maximum: 20.20ms Mean: 19.85ms StDev: 0.51ms Sensor response rate: 100% Read success rate: 84% Signed-off-by:
John Brooks <john@fastquake.com> Reviewed-by:
Harald Geyer <harald@ccbib.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Andy Shevchenko authored
commit 5a00b6c2 upstream. The commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") starts refusing misconfigured interrupt handlers. This makes intel_mid_powerbtn not working anymore. Add a mandatory flag to a threaded IRQ request in the driver. Fixes: 1c6c6952 ("genirq: Reject bogus threaded irq requests") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Anton Blanchard authored
commit 178f3582 upstream. IBM bit 31 (for the rest of us - bit 0) is a reserved field in the instruction definition of mtspr and mfspr. Hardware is encouraged to (and does) ignore it. As a result, if userspace executes an mtspr DSCR with the reserved bit set, we get a DSCR facility unavailable exception. The kernel fails to match against the expected value/mask, and we silently return to userspace to try and re-execute the same mtspr DSCR instruction. We loop forever until the process is killed. We should do something here, and it seems mirroring what hardware does is the better option vs killing the process. While here, relax the matching of mfspr PVR too. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Dave Martin authored
commit 99dfe80a upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: c6e6771b ("powerpc: Introduce VSX thread_struct and CONFIG_VSX") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
-
Fabien Parent authored
commit 43849785 upstream. Read access to the SPI flash are broken on da850-evm, i.e. the data read is not what is actually programmed on the flash. According to the datasheet for the M25P64 part present on the da850-evm, if the SPI frequency is higher than 20MHz then the READ command is not usable anymore and only the FAST_READ command can be used to read data. This commit specifies in the DTS that we should use FAST_READ command instead of the READ command. Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Fabien Parent <fparent@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Josef Bacik authored
commit d61b7f97 upstream. A user noticed that write performance was horrible over loopback and we traced it to an inversion of when we need to set MSG_MORE. It should be set when we have more bvec's to send, not when we are on the last bvec. This patch made the test go from 20 iops to 78k iops. Signed-off-by:
Josef Bacik <jbacik@fb.com> Fixes: 429a787b ("nbd: fix use-after-free of rq/bio in the xmit path") Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Jens Axboe authored
commit 429a787b upstream. For writes, we can get a completion in while we're still iterating the request and bio chain. If that happens, we're reading freed memory and we can crash. Break out after the last segment and avoid having the iterator read freed memory. Reviewed-by:
-
Alexey Kodanev authored
commit 0dbd7ff3 upstream. Found that if we run LTP netstress test with large MSS (65K), the first attempt from server to send data comparable to this MSS on fastopen connection will be delayed by the probe timer. Here is an example: < S seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32 > S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0 < . ack 1 win 342 length 0 Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now', as well as in 'size_goal'. This results the segment not queued for transmition until all the data copied from user buffer. Then, inside __tcp_push_pending_frames(), it breaks on send window test and continues with the check probe timer. Fragmentation occurs in tcp_write_wakeup()... +0.2 > P. seq 1:43777 ack 1 win 342 length 43776 < . ack 43777, win 1365 length 0 > P. seq 43777:65001 ack 1 win 342 options [...] length 21224 ... This also contradicts with the fact that we should bound to the half of the window if it is large. Fix this flaw by correctly initializing max_window. Before that, it could have large values that affect further calculations of 'size_goal'. Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
-
Mark Rutland authored
commit 7d9e8f71 upstream. Generally, taking an unexpected exception should be a fatal event, and bad_mode is intended to cater for this. However, it should be possible to contain unexpected synchronous exceptions from EL0 without bringing the kernel down, by sending a SIGILL to the task. We tried to apply this approach in commit 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0"), by sending a signal for any bad_mode call resulting from an EL0 exception. However, this also applies to other unexpected exceptions, such as SError and FIQ. The entry paths for these exceptions branch to bad_mode without configuring the link register, and have no kernel_exit. Thus, if we take one of these exceptions from EL0, bad_mode will eventually return to the original user link register value. This patch fixes this by introducing a new bad_el0_sync handler to cater for the recoverable case, and restoring bad_mode to its original state, whereby it calls panic() and never returns. The recoverable case branches to bad_el0_sync with a bl, and returns to userspace via the usual ret_to_user mechanism. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Fixes: 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0") Reported-by:
Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> [bwh: Backported to 3.16: - Leave type out of the log message as we don't have esr_get_class_string() - Adjust context] Signed-off-by:
-
Aleksander Morgado authored
commit 24d615a6 upstream. The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Eric Dumazet authored
commit 7be2c82c upstream. Ashizuka reported a highmem oddity and sent a patch for freescale fec driver. But the problem root cause is that core networking stack must ensure no skb with highmem fragment is ever sent through a device that does not assert NETIF_F_HIGHDMA in its features. We need to call illegal_highdma() from harmonize_features() regardless of CSUM checks. Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by:
"Ashizuka, Yuusuke" <ashiduka@jp.fujitsu.com> Signed-off-by:
-
Dave Martin authored
commit ad9e202a upstream. We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Fixes: 478fcb2c ("arm64: Debugging support") Signed-off-by:
Will Deacon <Will.Deacon@arm.com> Signed-off-by:
-
Dave Martin authored
commit aeb1f39d upstream. This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Fixes: 60ffc30d ("arm64: Exception handling") Signed-off-by:
-
Dave Martin authored
commit 9a17b876 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 478fcb2c ("arm64: Debugging support") Signed-off-by:
-
Jeff Layton authored
commit 6df8c9d8 upstream. sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Yegor Yefremov authored
commit befa6011 upstream. In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). Also add error checking for clk_prepare_enable(). Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
-
Einar Jón authored
commit c97c52be upstream. The priv->device pointer for c_can_pci is never set, but it is used without a NULL check in c_can_start(). Setting it in c_can_pci_probe() like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and without CONFIG_PM. This might also cause the pm_runtime_*() functions in c_can.c to actually be executed for c_can_pci devices - they are the only other place where priv->device is used, but they all contain a null check. Signed-off-by:
Einar Jón <tolvupostur@gmail.com> Signed-off-by:
-
Madhavan Srinivasan authored
commit df21d2fa upstream. Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453 ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Quinn Tran authored
commit fc1ffd6c upstream. During code inspection, while investigating following stack trace seen on one of the test setup, we found out there was possibility of memory leak becuase driver was not unwinding the stack properly. This issue has not been reproduced in a test environment or on a customer setup. Here's stack trace that was seen. [1469877.797315] Call Trace: [1469877.799940] [<ffffffffa03ab6e9>] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx] [1469877.806980] [<ffffffffa03ac50a>] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx] [1469877.814013] [<ffffffff813b6d01>] ? __pm_runtime_resume+0x51/0xa0 [1469877.820265] [<ffffffff8157c1f5>] ? _raw_spin_lock_irqsave+0x25/0x90 [1469877.826776] [<ffffffff8157cd2d>] ? _raw_spin_unlock_irqrestore+0x6d/0x80 [1469877.833720] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.839885] [<ffffffff8157cd0c>] ? _raw_spin_unlock_irqrestore+0x4c/0x80 [1469877.846830] [<ffffffff81319b9c>] local_pci_probe+0x4c/0xb0 [1469877.852562] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.858727] [<ffffffff81319c89>] pci_call_probe+0x89/0xb0 Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch description ] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Richard Weinberger authored
commit 1cb51a15 upstream. When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Rock Lee <rockdotlee@gmail.com> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Joonyoung Shim authored
commit bc7c36ee upstream. When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.16: add definition of the 'mevt' variable, added earlier upstream] Signed-off-by:
-
Jack Morgenstein authored
commit 9577b174 upstream. When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit 7c3945bc upstream. Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by:
-
