- 25 Jul, 2019 4 commits
-
-
David S. Miller authored
Leon Romanovsky says: ==================== DIM fixes for 5.3 Those two fixes for recently merged DIM patches, both exposed through RDMa DIM usage. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
DIM causes to the following warnings during kernel compilation which indicates that tx_profile and rx_profile are supposed to be declared in *.c and not in *.h files. In file included from ./include/rdma/ib_verbs.h:64, from ./include/linux/mlx5/device.h:37, from ./include/linux/mlx5/driver.h:51, from ./include/linux/mlx5/vport.h:36, from drivers/infiniband/hw/mlx5/ib_virt.c:34: ./include/linux/dim.h:326:1: warning: _tx_profile_ defined but not used [-Wunused-const-variable=] 326 | tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { | ^~~~~~~~~~ ./include/linux/dim.h:320:1: warning: _rx_profile_ defined but not used [-Wunused-const-variable=] 320 | rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { | ^~~~~~~~~~ Fixes: 4f75da36 ("linux/dim: Move implementation to .c files") Signed-off-by:Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Yamin Friedman authored
While using net_dim, a dim_sample was used without ever initializing the comps value. Added use of DIV_ROUND_DOWN_ULL() to prevent potential overflow, it should not be a problem to save the final result in an int because after the division by epms the value should not be larger than a few thousand. [ 1040.127124] UBSAN: Undefined behaviour in lib/dim/dim.c:78:23 [ 1040.130118] signed integer overflow: [ 1040.131643] 134718714 * 100 cannot be represented in type 'int' Fixes: 398c2b05 ("linux/dim: Add completions count to dim_sample") Signed-off-by:
Yamin Friedman <yaminf@mellanox.com> Signed-off-by:
-
Cong Wang authored
act_ife at least requires TCA_IFE_PARMS, so we have to bail out when there is no attribute passed in. Reported-by: syzbot+fbb5b288c9cb6a2eeac4@syzkaller.appspotmail.com Fixes: ef6980b6 ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 24 Jul, 2019 15 commits
-
-
Cong Wang authored
sock_efree() releases the sock refcnt, if we don't hold this refcnt when setting skb->destructor to it, the refcnt would not be balanced. This leads to several bug reports from syzbot. I have checked other users of sock_efree(), all of them hold the sock refcnt. Fixes: c8c8218e ("netrom: fix a memory leak in nr_rx_frame()") Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Arnd Bergmann authored
Some functions in the datapath code are factored out so that each one has a stack frame smaller than 1024 bytes with gcc. However, when compiling with clang, the functions are inlined more aggressively and combined again so we get net/openvswitch/datapath.c:1124:12: error: stack frame size of 1528 bytes in function 'ovs_flow_cmd_set' [-Werror,-Wframe-larger-than=] Marking both get_flow_actions() and ovs_nla_init_match_and_action() as 'noinline_for_stack' gives us the same behavior that we see with gcc, and no warning. Note that this does not mean we actually use less stack, as the functions call each other, and we still get three copies of the large 'struct sw_flow_key' type on the stack. The comment tells us that this was previously considered safe, presumably since the netlink parsing functions are called with a known backchain that does not also use a lot of stack space. Fixes: 9cc9a5cb ("datapath: Avoid using stack larger than 1024.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jakub Kicinski authored
I've been spending quite a bit of time fixing and preventing bit rot in the core TLS code. TLS seems to only be growing in importance, I'd like to help ensuring the quality of our implementation. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Andreas Schwab authored
The memory allocated for the stats array may contain arbitrary data. Fixes: e4f9ba64 ("net: phy: mscc: add support for VSC8514 PHY.") Fixes: 00d70d8e ("net: phy: mscc: add support for VSC8574 PHY") Fixes: a5afc167 ("net: phy: mscc: add support for VSC8584 PHY") Fixes: f76178dc ("net: phy: mscc: add ethtool statistics counters") Signed-off-by:
Andreas Schwab <schwab@suse.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Arseny Solokha authored
SFP modules connected using the SGMII interface have their own PHYs which are handled by the struct phylink's phydev field. On the other hand, for the modules connected using 1000Base-X interface that field is not set. Since commit ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages") phylink_start() ends up setting the phydev field using the sfp-bus infrastructure, which eventually calls phy_start() on it, and then calling phy_start() again on the same phydev from phylink_start() itself. Similar call sequence holds for phylink_stop(), only in the reverse order. This results in WARNs during network interface bringup and shutdown when a copper SFP module is connected, as phy_start() and phy_stop() are called twice in a row for the same phy_device: % ip link set up dev eth0 ------------[ cut here ]------------ called from state UP WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0 Modules linked in: CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1 NIP: c0227bf0 LR: c0227bf0 CTR: c004d224 REGS: df547720 TRAP: 0700 Not tainted (5.2.0+) MSR: 00029000 <CE,EE,ME> CR: 24002822 XER: 00000000 GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001 GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000 GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000 GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00 NIP [c0227bf0] phy_start+0x74/0xc0 LR [c0227bf0] phy_start+0x74/0xc0 Call Trace: [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable) [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4 [df547828] [c023cf08] gfar_enet_open+0x364/0x374 [df547898] [c029d870] __dev_open+0xe4/0x140 [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188 [df5478f8] [c029dc28] dev_change_flags+0x20/0x54 [df547918] [c02ae304] do_setlink+0x310/0x818 [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df547c28] [c02b222c] rtnl_newlink+0x48/0x68 [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38 --- interrupt: c01 at 0xfd4e030 LR = 0xfd4e010 Instruction dump: 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0 ---[ end trace d4c095aeaf6ea998 ]--- and % ip link set down dev eth0 ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88 <...> Call Trace: [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable) [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44 [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44 [df581858] [c0225608] phylink_stop+0x7c/0xe4 [df581868] [c023c57c] stop_gfar+0x7c/0x94 [df581888] [c023c5b8] gfar_close+0x24/0x94 [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8 [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188 [df5818f8] [c029dc28] dev_change_flags+0x20/0x54 [df581918] [c02ae304] do_setlink+0x310/0x818 [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df581c28] [c02b222c] rtnl_newlink+0x48/0x68 [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38 <...> ---[ end trace d4c095aeaf6ea999 ]--- SFP modules with the 1000Base-X interface are not affected. Place explicit calls to phy_start() and phy_stop() before enabling or after disabling an attached SFP module, where phydev is not yet set (or is already unset), so they will be made only from the inside of sfp-bus, if needed. Fixes: 21796261 ("net: phy: warn if phy_start is called from invalid state") Signed-off-by:
Arseny Solokha <asolokha@kb.kras.ru> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.3-20190724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-07-24 this is a pull reqeust of 7 patches for net/master. The first patch is by Rasmus Villemoes add a missing netif_carrier_off() to register_candev() so that generic netdev trigger based LEDs are initially off. Nikita Yushchenko's patch for the rcar_canfd driver fixes a possible IRQ storm on high load. The patch by Weitao Hou for the mcp251x driver add missing error checking to the work queue allocation. Both Wen Yang's and Joakim Zhang's patch for the flexcan driver fix a problem with the stop-mode. Stephane Grosjean contributes a patch for the peak_usb driver to fix a potential double kfree_skb(). The last patch is by YueHaibing and fixes the error path in can-gw's cgw_module_init() function. ==================== Signed-off-by:
-
Haishuang Yan authored
Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull() which may change skb->data, so we need to re-load ipv6h at the right place. Fixes: 898b2979 ("ip6_gre: Refactor ip6gre xmit codes") Cc: William Tu <u9012063@gmail.com> Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
Pavel Machek authored
Cleanup testing for error condition. Signed-off-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
YueHaibing authored
This patch add error path for cgw_module_init to avoid possible crash if some error occurs. Fixes: c1aabdf3 ("can-gw: add netlink based CAN routing") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Stephane Grosjean authored
When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb478555 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Joakim Zhang authored
To enter stop mode, the CPU should manually assert a global Stop Mode request and check the acknowledgment asserted by FlexCAN. The CPU must only consider the FlexCAN in stop mode when both request and acknowledgment conditions are satisfied. Fixes: de3578c1 ("can: flexcan: add self wakeup support") Reported-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by:
-
Wen Yang authored
The gpr_np variable is still being used in dev_dbg() after the of_node_put() call, which may result in use-after-free. Fixes: de3578c1 ("can: flexcan: add self wakeup support") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by:
-
Weitao Hou authored
add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163 ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by:
Weitao Hou <houweitaoo@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Tested-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
-
Nikita Yushchenko authored
We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23e ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Rasmus Villemoes authored
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by:
-
- 23 Jul, 2019 14 commits
-
-
Andy Shevchenko authored
Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496Reported-and-tested-by:
Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== selftests: forwarding: GRE multipath fixes Patch #1 ensures IPv4 forwarding is enabled during the test. Patch #2 fixes the flower filters used to measure the distribution of the traffic between the two nexthops, so that the test will pass regardless if traffic is offloaded or not. ==================== Signed-off-by: -
Ido Schimmel authored
The TC filters used in the test do not work with veth devices because the outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw netdevs since the hardware always looks at "The first Ethertype that does not point to either: VLAN, CNTAG or configurable Ethertype". Fix this by matching on the VLAN ID instead, but on the ingress side. The reason why this is not performed at egress is explained in the commit cited below. Fixes: 541ad323 ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by:
-
Ido Schimmel authored
The test did not enable IPv4 forwarding during its setup phase, which causes the test to fail on machines where IPv4 forwarding is disabled. Fixes: 54818c4c ("selftests: forwarding: Test multipath tunneling") Signed-off-by:
-
David S. Miller authored
This reverts commit f4e5f775. Andrew Lunn says this should be handled another way. Signed-off-by:
-
Jose Abreu authored
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by:
Ondrej Jirman <megi@xff.cz> Tested-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Two fixes Two fixes targeting -net. ==================== Signed-off-by: -
Jose Abreu authored
We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by:
-
Jose Abreu authored
RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by:
-
Yonglong Liu authored
Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 07777246 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Reviewed-by:
linyunsheng <linyunsheng@huawei.com> Signed-off-by:
-
Maxime Chevallier authored
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb04326 ("net: mvpp2: phylink support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
- 22 Jul, 2019 7 commits
-
-
Thomas Falcon authored
The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set
-
Thomas Gleixner authored
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by:
Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For two regressions in media core: - v4l2-subdev: fix regression in check_pad() - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use" * tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use media: v4l2-subdev: fix regression in check_pad() -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several netfilter fixes including a nfnetlink deadlock fix from Florian Westphal and fix for dropping VRF packets from Miaohe Lin. 2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore proper block sharing. 3) Fix r8169 PHY init from Thomas Voegtle. 4) Fix memory leak in mac80211, from Lorenzo Bianconi. 5) Missing NULL check on object allocation in cxgb4, from Navid Emamdoost. 6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn. 7) Check that there is actually an ip header to access in skb->data in VRF, from Peter Kosyh. 8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang. 9) One more tweak the the TCP fragmentation memory limit changes, to be less harmful to applications setting small SO_SNDBUF values. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) tcp: be more careful in tcp_fragment() hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback() vrf: make sure skb->data contains ip header to make routing connector: remove redundant input callback from cn_dev qed: Prefer pcie_capability_read_word() igc: Prefer pcie_capability_read_word() cxgb4: Prefer pcie_capability_read_word() be2net: Synchronize be_update_queues with dev_watchdog bnx2x: Prevent load reordering in tx completion processing net: phy: sfp: hwmon: Fix scaling of RX power net: sched: verify that q!=NULL before setting q->flags chelsio: Fix a typo in a function name allocate_flower_entry: should check for null deref net: hns3: typo in the name of a constant kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist. tipc: Fix a typo mac80211: don't warn about CW params when not using them mac80211: fix possible memory leak in ieee80211_assign_beacon nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN nl80211: fix VENDOR_CMD_RAW_DATA ...
-
