- 07 Mar, 2022 2 commits
-
-
Jani Nikula authored
We have a helper for getting at the enclosing gmbus struct from the embedded i2c_adapter, use it. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220304101426.1891347-2-jani.nikula@intel.com
-
Jani Nikula authored
Limit the scope. Suggested-by:
-
- 04 Mar, 2022 19 commits
-
-
Ville Syrjälä authored
Replace the hardcoded 2 pipe assumptions when we're massaging pipe_mode and the pipe_src rect to be suitable for bigjoiner. Instead we can just count the number of pipes in the bitmask. v2: Introduce intel_bigjoiner_num_pipes() Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Ville Syrjälä authored
Since we now have the bigjoiner_pipes bitmask the boolean is redundant. Get rid of it. Also, populating bigjoiner_pipes already during encoder->compute_config() allows us to use it much earlier during the state calculation as well. The initial aim is to use it in intel_crtc_compute_config(). v2: Move the hweight(bigjoiner_pipes) stuff to a later patch Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> #v1 Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> #v1 Signed-off-by:
-
Ville Syrjälä authored
Instead of just having the pipe_src_{w,h} let's use a full drm_rect for it. This will be particularly useful to astract away some bigjoiner details. v2: No hweight() stuff yet Signed-off-by: -
Ville Syrjälä authored
Use designated initializers to make it clear what is what, and to decouple us from the specific ordering of the members. Signed-off-by:
-
Ville Syrjälä authored
Remove the pointless m2_frac_en from bxt_clk_div. Signed-off-by:
-
Ville Syrjälä authored
Use the simple '= {}' form to initialize empty arrays/structs. Also add some missing whitespace. Signed-off-by: -
Ville Syrjälä authored
Toss a bunch if constants into .rodata drom the stack. Also shrink the types of some of the arrays to reduce the size. bloat-o-meter -c intel_dpll_mgr.o: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-86 (-86) Function old new delta icl_get_dplls 3393 3372 -21 skl_get_dpll 2069 2004 -65 Total: Before=28029, After=27943, chg -0.31% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) Data old new delta Total: Before=17, After=17, chg +0.00% add/remove: 2/0 grow/shrink: 0/2 up/down: 28/-129 (-101) RO Data old new delta dco_central_freq - 24 +24 div1_vals - 4 +4 odd_dividers 28 7 -21 even_dividers 144 36 -108 Total: Before=3600, After=3499, chg -2.81% Signed-off-by:
-
Ville Syrjälä authored
We can trivially replace skl_wrpll_context_init() with a single designated initializer. Signed-off-by:
-
Ville Syrjälä authored
Move intel_crtc_pch_transcoder() and has_pch_trancoder() to a more appropritate place (intel_pch_display.c). Signed-off-by:
-
Ville Syrjälä authored
Move the ibx pch port sanitation code into intel_pch_display.c where it now belongs. Signed-off-by:
-
Ville Syrjälä authored
Now that we track framestart_delay in the crtc state with readout and state checker support we can remove the explicit framestart_delay sanitation code. Also I'm not convinced reprogramming this while the pipe is running is even valid. CHICKEN_TRANS (hsw+) and TRANS_CHICKEN2 (cpt+) docs at least make no mention of double buffering which seems to imply that live reprogramming is not supported. On older platforms PIPECONF and PCH_TRANSCONF (ibx) are double buffered though, so might be that we could do this on the older platforms. But doesn't really make sense to special case old platforms for this. So from now on if the BIOS has misprogrammed this we shall simply do a full modeset at boot to fix it up. Such systems will of course lose fastboot, but I think less code (and less uncertainty what reprogramming this on a running pipe will even do) outweighs that. Signed-off-by:
-
Ville Syrjälä authored
We need to make framestart_delay dynamic for DRRS on PCH ports. To that end move it into the crtc state. As a bonus we get state check+dump for it. Will also allow us to get rid of the somewhat questionable framestart_delay sanitation code. Signed-off-by:
-
Madhumitha Tolakanahalli Pradeep authored
Changes since v2.14: - Release Notes for v2.15 Fix for corruption issue when DC States are enabled. - Release Notes for v2.16 Fix for cases with flip queue and DC6v are enabled. Signed-off-by:
Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220223222801.397632-2-madhumitha.tolakanahalli.pradeep@intel.com
-
Jani Nikula authored
Include linux/highmem.h and linux/swap.h explicitly where needed so we can drop the linux/i2c.h include from i915_drv.h where it pulled in the dependencies implicitly. Signed-off-by:
-
Jani Nikula authored
Allocate the individual intel_gmbus structs dynamically. This lets us hide struct intel_gmbus inside intel_gmbus.c completely. Also use the cleanup function on the error path to avoid duplication. Leave #include <linux/i2c.h> in i915_drv.h for now, as it pulls in a bunch of implicit dependencies. Signed-off-by:
-
Jani Nikula authored
Avoid the additional gmbus lookup on the pin. Signed-off-by:
-
Jani Nikula authored
Avoid separate pin lookups for validity and name. Signed-off-by:
-
Jani Nikula authored
Combine the platform specific if ladders for array lookup and size checks into one. This is cleaner and avoids duplication, but hopefully also helps any static analyzers that seem to have trouble with the bounds checks. Signed-off-by:
-
Tejas Upadhyay authored
Add ADL-N stepping-substepping info in accordance to BSpec. Bspec: 68397 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by:
-
- 03 Mar, 2022 9 commits
-
-
Ville Syrjälä authored
Print the offending plane/crtc id+name in the async flip debugs. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
The current implementation of the async flip wm0/ddb optimization does not work at all. The biggest problem is that we skip the whole intel_pipe_update_{start,end}() dance and thus never actually complete the commit that is trying to do the wm/ddb change. To fix this we need to move the do_async_flip flag to the crtc state since we handle commits per-pipe, not per-plane. Also since all planes can now be included in the first/last "async flip" (which gets converted to a sync flip to do the wm/ddb mangling) we need to be more careful when checking if the plane state is async flip comptatible. Only planes doing the async flip should be checked and other planes are perfectly fine not adhereing to any async flip related limitations. However for subsequent commits which are actually going do the async flip in hardware we want to make sure no other planes are in the state. That should never happen assuming we did our job correctly, so we'll toss in a WARN to make sure we catch any bugs here. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: c3639f3b ("drm/i915: Use wm0 only during async flips for DG2") Signed-off-by: -
Ville Syrjälä authored
Since the async flip state check is done very late and thus it can see potentially all the planes in the state (due to the wm/ddb optimization) we need to move the "can the requested plane do async flips at all?" check much earlier. For this purpose we introduce intel_async_flip_check_uapi() that gets called early during the atomic check. And for good measure we'll throw in a couple of basic checks: - is the crtc active? - was a modeset flagged? - is+was the plane enabled? Though atm all of those should be guaranteed by the fact that the async flip can only be requested through the legacy page flip ioctl. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: c3639f3b ("drm/i915: Use wm0 only during async flips for DG2") Signed-off-by:
-
Ville Syrjälä authored
data_rate==0 no longer means a plane is disabled, it could also mean we want to use the minimum ddb allocation for it. Hence we can't bail out early during ddb allocation or else we'll simply forget to allocate any ddb for such planes. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: 6a4d8cc6 ("drm/i915: Don't allocate extra ddb during async flip for DG2") Signed-off-by:
-
Stanislav Lisovskiy authored
Do mapping using CONTIGUOUS flag - otherwise i915_gem_object_is_contiguous warn is triggered. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211209141817.16038-1-stanislav.lisovskiy@intel.com
-
José Roberto de Souza authored
Some users are suffering with PSR2 issues that are under debug or issues that were root caused to panel firmware bugs, to make life of those users easier here adding a option to disable PSR2 with kernel parameters so they can still benefit from PSR1 power savings. Using the same enable_psr that is current used to turn the whole feature on or off and allowing user to select up to what PSR version it should enable. Right now users only set this parameter to 0 when they want to disable PSR1 and PSR2 or don't add it at all leaving it to per-chip behavior so it should not cause a bad impact on users. v2: - changing enable_psr values (Ville and Rodrigo) Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4951 Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220224202523.993560-1-jose.souza@intel.com
-
Jouni Högander authored
Currently we are observing occasional screen flickering when PSR2 selective fetch is enabled. More specifically glitch seems to happen on full frame update when cursor moves to coords x = -1 or y = -1. According to Bspec SF Single full frame should not be set if SF Partial Frame Enable is not set. This happened to be true for ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's actually "SF Partial Frame Enable" (Bit 31). Setting "SF Partial Frame Enable" bit also on full update seems to fix screen flickering. Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE only if not on ADL_P. Bit 31 has different meaning in ADL_P. Bspec: 49274 v2: Fix Mihai Harpau email address v3: Modify commit message and remove unnecessary comment Tested-by:
Lyude Paul <lyude@redhat.com> Fixes: 7f6002e5 ("drm/i915/display: Enable PSR2 selective fetch by default") Reported-by:
-
Lee Shawn C authored
VBT 249 update to support more TMDS clock rate 3.00G, 3.40G and 5.94G. Refer to this new definition to configure max TMDS clock rate for HDMI driver. BSpec: 20124 v2: new subject Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Swathi Dhanavanthri authored
This is not supported for ADLP and is not needed. Signed-off-by:
Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by:
-
- 02 Mar, 2022 6 commits
-
-
Tejas Upadhyay authored
The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before completing the translation enable command and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translati on(), waiting for the completion of TE transition. This adds RPLS to a quirk list for those devices and skips TE disabling if the qurik hits. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4898Tested-by:
Raviteja Goud Talla <ravitejax.goud.talla@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Remove the local onoff() implementation and adopt the str_on_off() from linux/string_helpers.h. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
Lucas De Marchi authored
Remove the local enableddisabled() implementation and adopt the str_enabled_disabled() from linux/string_helpers.h. Signed-off-by:
-
Lucas De Marchi authored
Remove the local enabledisable() implementation and adopt the str_enable_disable() from linux/string_helpers.h. Signed-off-by:
-
Lucas De Marchi authored
Remove the local yesno() implementation and adopt the str_yes_no() from linux/string_helpers.h. Signed-off-by:
-
Rodrigo Vivi authored
To catch up with recent rounds of pull requests and get some drm-misc dependencies so we can merge linux/string_helpers related changes. Signed-off-by:
-
- 01 Mar, 2022 2 commits
-
-
Colin Ian King authored
Don't populate the read-only arrays on the stack but instead make them static const and signed 8 bit ints. Also makes the object code a little smaller. Reformat the statements to clear up checkpatch warning. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.18-2022-02-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.18-2022-02-25: amdgpu: - Raven2 suspend/resume fix - SDMA 5.2.6 updates - VCN 3.1.2 updates - SMU 13.0.5 updates - DCN 3.1.5 updates - Virtual display fixes - SMU code cleanup - Harvest fixes - Expose benchmark tests via debugfs - Drop no longer relevant gart aperture tests - More RAS restructuring - W=1 fixes - PSR rework - DP/VGA adapter fixes - DP MST fixes - GPUVM eviction fix - GPU reset debugfs register dumping support - Misc display fixes - SR-IOV fix - Aldebaran mGPU fix - Add module parameter to disable XGMI for testing amdkfd: - IH ring overflow logging fixes - CRIU fixes - Misc fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225183535.5907-1-alexander.deucher@amd.com
-
- 28 Feb, 2022 2 commits
-
-
Imre Deak authored
Move intel_display_power_well_is_enabled() to intel_power_well.c, as a step towards making the low-level power well internals (i915_power_well_ops/desc structs) hidden. Eventually the call to this function and in general accessing power wells directly from elsewhere in the driver should be replaced by the use of power domains. No functional change. Suggested-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Add functions to get a power well's actual- and cached-enabled state, name, domain mask and refcount, as a step towards making the low-level power well internals (i915_power_well_ops/desc structs) hidden. No functional change. Suggested-by:
-
