- 05 Oct, 2011 40 commits
-
-
Jonathan Cameron authored
Scraps the pointless name define and adds an id table. It's not technically required in drivers with only one supported part but it does make the probe code more consistent. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jonathan Cameron authored
When the new allocation code was introduced a stray pointer to iio_dev structure was left in the chip state structure. This was never set but was then registered with the core. Signed-off-by:
-
Jonathan Cameron authored
No functional change, just a trivial tidy up so all drivers do the same thing. Signed-off-by:
-
Jonathan Cameron authored
Driver ported over to hwmon where it fits much better. Signed-off-by:
-
Franky Lin authored
Absorb related code into brcmf_add_if/brcmf_del_if. This is part of the net device interface clean up. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Franky Lin authored
Some elements in structure brcmf_if are unused at all or redundant. This patch cleans it up. Reviewed-by:
-
Arend van Spriel authored
Throughout the data structures within the driver several references to the driver variables were stored. As the storage and access functions are now consolidated into srom.c those references are no longer needed and have been removed. Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function is called once with parameter 'off' fixed to zero. This parameter has been removed. Reviewed-by:
-
Arend van Spriel authored
The storage of variables obtained from srom are now stored in a linked list and lookup is done based on the enumerated identifier. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Arend van Spriel authored
In the srom variable tables fields were identified using string identifiers. This has been replaced by enumeration identifiers. Reported-by:
-
Arend van Spriel authored
The driver variables from srom are stored in memory with string identifiers and the caller needed to use this string identifier to retrieve a driver variable. The commit changes the calling code replacing strings with enumerated identifiers. Reported-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
In the driver several driver variables were looked up that are not supported by the srom code. These have been removed. Reviewed-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function brcmf_sdbrcm_bus_stop() terminates the watchdog and dpc thread, but this function can be called from the dpc thread itself. Stopping the dpc thread is only done when it is not the 'current' thread. Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
The driver contained locking macros which map directly to the lock function provided by the kernel. It does not provide any additional value so these have been removed. Reported-by:
-
Arend van Spriel authored
The functions getvar() and getintvar() had to pass the buffer containing the driver variables. Now they pass the structure containing this buffer hiding what type of buffer/container is used for storing the driver variables. Reviewed-by:
-
Arend van Spriel authored
The phy code used its own driver variable lookup functions which were duplicates of those in the brcmsmac driver (in srom.c). The phy code now uses the functions in srom.c through the phy_shim interface. Reviewed-by:
-
Franky Lin authored
Remove some single line functions for bus register/unregister interface Reviewed-by:
-
Franky Lin authored
threads_only is always true as we never use the tasklet implementation. So related code is removed. Reviewed-by:
-
Arend van Spriel authored
The driver uses variables which are stored in string format. Using strings as variable identifiers is disliked by the community. The driver has been cleaned up and the only module providing these variables is srom.c. The variable retrieval functions have been moved to srom.c in preparation of a more likable way to store and lookup these driver variables. Reported-by:
-
Roland Vossen authored
A bug was introduced by the following commit (Sep 13): staging: brcm80211: use endian annotated structures in brcmsmac Result was that 64 bits systems will not be able to acquire an IP address. Also the rmmod crashed. This has been fixed and retested on a Sparc64. Reviewed-by: -
Roland Vossen authored
Dpc and timer events can now be traced. Combined with Mac80211 driver callback tracing, all entry points into the driver can now be traced. Reported-by:
-
Alwin Beukers authored
Removed the brcms_c_nmode_validate function as it only checks N-mode capability, which should always be true. Reviewed-by:
-
Alwin Beukers authored
Combined if statements in brcms_c_edcf_setparams and brcms_c_wme_setparams functions. Reviewed-by:
-
Alwin Beukers authored
- removed brcms_b_dotxstatus - changed 'fatal' argument of brcms_b_txstatus from INOUT to OUT. Reviewed-by:
-
Alwin Beukers authored
- removed copying field wlc->machwcap from brcms_hardware to brcms_c_info during module attach. - field wlc->machwcap was written but never read. Therefore it was removed. Reviewed-by:
-
Alwin Beukers authored
- removed call to brcms_b_tx_fifo_suspended on receipt of TX FIFO suspend/flush completion signal. - removed brcms_b_tx_fifo_suspended function as it is not being used elsewhere. Reviewed-by:
-
Alwin Beukers authored
- removed brcms_c_write_template_ram function. - removed brcms_c_mctrl function. - removed brcms_c_pllreq function. - removed brcms_c_mhf function. - removed brcms_c_rate_shm_offset function. - removed brcms_c_write_hw_bcntemplates function. Reported-by:
-
Alwin Beukers authored
Removed brcms_c_xmtfifo_sz_get function. Reported-by:
-
Alwin Beukers authored
- removed brcms_c_read_shm and brcms_c_write_shm functions. - removed redundant argument check from brcms_c_copyto_shm function. Reported-by:
-
Alwin Beukers authored
The comment says the rateset is being cleared when switching to GMODE_LEGACY_B, but the code that follows it does not do so. Besides, the rateset is already valid at this point. Reviewed-by:
-
Alwin Beukers authored
Reviewed-by:
-
Alwin Beukers authored
Empty functions are good candidates for removal. Reviewed-by:
-
Alwin Beukers authored
Reviewed-by:
-
Alwin Beukers authored
- removed unneeded return statements at end of functions. - changed return value of brcms_c_radio_monitor_start to void. Reviewed-by:
-
Alwin Beukers authored
Functions were trivial so not really adding value. Reviewed-by:
-
Alwin Beukers authored
Reviewed-by:
-
Franky Lin authored
Stop assigning priority to watchdog and dpc threads. Remove related code. Reviewed-by:
-
Franky Lin authored
Use constant for interrupt/polling mode configuration. Reviewed-by:
-
Franky Lin authored
rtnl lock is used improperly in fullmac. This patch intends to clean them up. Reported-by:
Sukesh Srikakula <sukeshs@broadcom.com> Reviewed-by:
-
Roland Vossen authored
Fix double include as detected by checkincludes script. Signed-off-by:
-
