- 02 Aug, 2010 40 commits
-
-
Jiaying Zhang authored
commit c8d46e41 upstream (as of v2.6.33-git11) fallocate() may potentially instantiate blocks past EOF, depending on the flags used when it is called. e2fsck currently has a test for blocks past i_size, and it sometimes trips up - noticeably on xfstests 013 which runs fsstress. This patch from Jiayang does fix it up - it (along with e2fsprogs updates and other patches recently from Aneesh) has survived many fsstress runs in a row. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Jiaying Zhang <jiayingz@google.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Curt Wohlgemuth authored
commit 73b50c1c upstream (as of v2.6.33-git11) Calls to ext4_handle_dirty_metadata should only pass in an inode pointer for inode-specific metadata, and not for shared metadata blocks such as inode table blocks, block group descriptors, the superblock, etc. The BUG_ON can get tripped when updating a special device (such as a block device) that is opened (so that i_mapping is set in fs/block_dev.c) and the file system is mounted in no journal mode. Addresses-Google-Bug: #2404870 Signed-off-by:
Curt Wohlgemuth <curtw@google.com> Signed-off-by:
-
Theodore Ts'o authored
commit 19f5fb7a upstream (as of v2.6.33-git11) At several places we modify EXT4_I(inode)->i_state without holding i_mutex (ext4_release_file, ext4_bmap, ext4_journalled_writepage, ext4_do_update_inode, ...). These modifications are racy and we can lose updates to i_state. So convert handling of i_state to use bitops which are atomic. Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 1296cc85 upstream (as of v2.6.33-rc6) We should update reserve space if it is delalloc buffer and that is indicated by EXT4_GET_BLOCKS_DELALLOC_RESERVE flag. So use EXT4_GET_BLOCKS_DELALLOC_RESERVE in place of EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE [ Stable note: This fixes a corruption cuased by the following reproduction case: rm -f $TEST_FN touch $TEST_FN fallocate -n -o 656712 -l 858907 $TEST_FN dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=1011020 count=36983 sync dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=332121 count=24005 dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=1040179 count=93319 If the filesystem is then unmounted and e2fsck run forced, the i_blocks field for the file $TEST_FN will be found to be incorrect. ] Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 5f634d06 upstream (as of v2.6.33-rc6) When we fallocate a region of the file which we had recently written, and which is still in the page cache marked as delayed allocated blocks we need to make sure we don't do the quota update on writepage path. This is because the needed quota updated would have already be done by fallocate. Signed-off-by:
-
Aneesh Kumar K.V authored
commit 1db91382 upstream (as of v2.6.33-rc6) We need to release the journal before we do a write_inode. Otherwise we could deadlock. Signed-off-by:
-
Theodore Ts'o authored
commit 9d0be502 upstream (as of v2.6.33-rc3) In the past, ext4_calc_metadata_amount(), and its sub-functions ext4_ext_calc_metadata_amount() and ext4_indirect_calc_metadata_amount() badly over-estimated the number of metadata blocks that might be required for delayed allocation blocks. This didn't matter as much when functions which managed the reserved metadata blocks were more aggressive about dropping reserved metadata blocks as delayed allocation blocks were written, but unfortunately they were too aggressive. This was fixed in commit 0637c6f4, but as a result the over-estimation by ext4_calc_metadata_amount() would lead to reserving 2-3 times the number of pending delayed allocation blocks as potentially required metadata blocks. So if there are 1 megabytes of blocks which have been not yet been allocation, up to 3 megabytes of space would get reserved out of the user's quota and from the file system free space pool until all of the inode's data blocks have been allocated. This commit addresses this problem by much more accurately estimating the number of metadata blocks that will be required. It will still somewhat over-estimate the number of blocks needed, since it must make a worst case estimate not knowing which physical blocks will be needed, but it is much more accurate than before. Signed-off-by:
-
Theodore Ts'o authored
commit ee5f4d9c upstream (as of v2.6.33-rc3) Commit 0637c6f4 had a typo which caused the reserved metadata blocks to not be released correctly. Fix this. Signed-off-by:
-
Theodore Ts'o authored
commit 0637c6f4 upstream (as of v2.6.33-rc3) As reported in Kernel Bugzilla #14936, commit d21cd8f1 triggered a BUG in the function ext4_da_update_reserve_space() found in fs/ext4/inode.c. The root cause of this BUG() was caused by the fact that ext4_calc_metadata_amount() can severely over-estimate how many metadata blocks will be needed, especially when using direct block-mapped files. In addition, it can also badly *under* estimate how much space is needed, since ext4_calc_metadata_amount() assumes that the blocks are contiguous, and this is not always true. If the application is writing blocks to a sparse file, the number of metadata blocks necessary can be severly underestimated by the functions ext4_da_reserve_space(), ext4_da_update_reserve_space() and ext4_da_release_space(). This was the cause of the dq_claim_space reports found on kerneloops.org. Unfortunately, doing this right means that we need to massively over-estimate the amount of free space needed. So in some cases we may need to force the inode to be written to disk asynchronously in to avoid spurious quota failures. http://bugzilla.kernel.org/show_bug.cgi?id=14936Signed-off-by:
-
Aneesh Kumar K.V authored
commit 515f41c3 upstream (as of v2.6.33-rc3) This fixes a bug (found by Curt Wohlgemuth) in which new blocks returned from an extent created with ext4_ext_zeroout() can have dirty metadata still associated with them. Signed-off-by:
-
Richard Kennedy authored
commit 2faf2e19 upstream (as of v2.6.33-rc3) When ext4_da_writepages increases the nr_to_write in writeback_control then it must always re-base the return value. Originally there was a (misguided) attempt prevent wbc.nr_to_write from going negative. In fact, it's necessary to allow nr_to_write to be negative so that wb_writeback() can correctly calculate how many pages were actually written. Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by:
-
Julia Lawall authored
commit d3533d72 upstream (as of v2.6.33-rc3) b_entry_name and buffer are initially NULL, are initialized within a loop to the result of calling kmalloc, and are freed at the bottom of this loop. The loop contains gotos to cleanup, which also frees b_entry_name and buffer. Some of these gotos are before the reinitializations of b_entry_name and buffer. To maintain the invariant that b_entry_name and buffer are NULL at the top of the loop, and thus acceptable arguments to kfree, these variables are now set to NULL after the kfrees. This seems to be the simplest solution. A more complicated solution would be to introduce more labels in the error handling code at the end of the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Theodore Ts'o authored
commit cc3e1bea upstream (as of v2.6.33-rc3) This is a bit complicated because we are trying to optimize when we send barriers to the fs data disk. We could just throw in an extra barrier to the data disk whenever we send a barrier to the journal disk, but that's not always strictly necessary. We only need to send a barrier during a commit when there are data blocks which are must be written out due to an inode written in ordered mode, or if fsync() depends on the commit to force data blocks to disk. Finally, before we drop transactions from the beginning of the journal during a checkpoint operation, we need to guarantee that any blocks that were flushed out to the data disk are firmly on the rust platter before we drop the transaction from the journal. Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4. Signed-off-by:
-
Surbhi Palande authored
commit 034fb4c9 upstream (as of v2.6.33-rc3) This patch fixes the Kernel BZ #14286. When the address of an extent corresponding to a valid block is corrupted, a -EIO should be reported instead of a BUG(). This situation should not normally not occur except in the case of a corrupted filesystem. If however it does, then the system should not panic directly but depending on the mount time options appropriate action should be taken. If the mount options so permit, the I/O should be gracefully aborted by returning a -EIO. http://bugzilla.kernel.org/show_bug.cgi?id=14286Signed-off-by:
Surbhi Palande <surbhi.palande@canonical.com> Signed-off-by:
-
Dmitry Monakhov authored
commit d21cd8f1 upstream (as of v2.6.33-rc2) We have to delay vfs_dq_claim_space() until allocation context destruction. Currently we have following call-trace: ext4_mb_new_blocks() /* task is already holding ac->alloc_semp */ ->ext4_mb_mark_diskspace_used ->vfs_dq_claim_space() /* acquire dqptr_sem here. Possible deadlock */ ->ext4_mb_release_context() /* drop ac->alloc_semp here */ Let's move quota claiming to ext4_da_update_reserve_space() ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc7 #18 ------------------------------------------------------- write-truncate-/3465 is trying to acquire lock: (&s->s_dquot.dqptr_sem){++++..}, at: [<c025e73b>] dquot_claim_space+0x3b/0x1b0 but task is already holding lock: (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&meta_group_info[i]->alloc_sem){++++..}: [<c017d04b>] __lock_acquire+0xd7b/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0527191>] down_read+0x51/0x90 [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370 [<c02d0c1c>] ext4_mb_free_blocks+0x46c/0x870 [<c029c9d3>] ext4_free_blocks+0x73/0x130 [<c02c8cfc>] ext4_ext_truncate+0x76c/0x8d0 [<c02a8087>] ext4_truncate+0x187/0x5e0 [<c01e0f7b>] vmtruncate+0x6b/0x70 [<c022ec02>] inode_setattr+0x62/0x190 [<c02a2d7a>] ext4_setattr+0x25a/0x370 [<c022ee81>] notify_change+0x151/0x340 [<c021349d>] do_truncate+0x6d/0xa0 [<c0221034>] may_open+0x1d4/0x200 [<c022412b>] do_filp_open+0x1eb/0x910 [<c021244d>] do_sys_open+0x6d/0x140 [<c021258e>] sys_open+0x2e/0x40 [<c0103100>] sysenter_do_call+0x12/0x32 -> #2 (&ei->i_data_sem){++++..}: [<c017d04b>] __lock_acquire+0xd7b/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0527191>] down_read+0x51/0x90 [<c02a5787>] ext4_get_blocks+0x47/0x450 [<c02a74c1>] ext4_getblk+0x61/0x1d0 [<c02a7a7f>] ext4_bread+0x1f/0xa0 [<c02bcddc>] ext4_quota_write+0x12c/0x310 [<c0262d23>] qtree_write_dquot+0x93/0x120 [<c0261708>] v2_write_dquot+0x28/0x30 [<c025d3fb>] dquot_commit+0xab/0xf0 [<c02be977>] ext4_write_dquot+0x77/0x90 [<c02be9bf>] ext4_mark_dquot_dirty+0x2f/0x50 [<c025e321>] dquot_alloc_inode+0x101/0x180 [<c029fec2>] ext4_new_inode+0x602/0xf00 [<c02ad789>] ext4_create+0x89/0x150 [<c0221ff2>] vfs_create+0xa2/0xc0 [<c02246e7>] do_filp_open+0x7a7/0x910 [<c021244d>] do_sys_open+0x6d/0x140 [<c021258e>] sys_open+0x2e/0x40 [<c0103100>] sysenter_do_call+0x12/0x32 -> #1 (&sb->s_type->i_mutex_key#7/4){+.+...}: [<c017d04b>] __lock_acquire+0xd7b/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0526505>] mutex_lock_nested+0x65/0x2d0 [<c0260c9d>] vfs_load_quota_inode+0x4bd/0x5a0 [<c02610af>] vfs_quota_on_path+0x5f/0x70 [<c02bc812>] ext4_quota_on+0x112/0x190 [<c026345a>] sys_quotactl+0x44a/0x8a0 [<c0103100>] sysenter_do_call+0x12/0x32 -> #0 (&s->s_dquot.dqptr_sem){++++..}: [<c017d361>] __lock_acquire+0x1091/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0527191>] down_read+0x51/0x90 [<c025e73b>] dquot_claim_space+0x3b/0x1b0 [<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380 [<c02d210a>] ext4_mb_new_blocks+0x34a/0x530 [<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0 [<c02a5966>] ext4_get_blocks+0x226/0x450 [<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0 [<c02a6ed6>] ext4_da_writepages+0x506/0x790 [<c01de272>] do_writepages+0x22/0x50 [<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80 [<c01d7b9b>] filemap_flush+0x2b/0x30 [<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60 [<c029e595>] ext4_release_file+0x75/0xb0 [<c0216b59>] __fput+0xf9/0x210 [<c0216c97>] fput+0x27/0x30 [<c02122dc>] filp_close+0x4c/0x80 [<c014510e>] put_files_struct+0x6e/0xd0 [<c01451b7>] exit_files+0x47/0x60 [<c0146a24>] do_exit+0x144/0x710 [<c0147028>] do_group_exit+0x38/0xa0 [<c0159abc>] get_signal_to_deliver+0x2ac/0x410 [<c0102849>] do_notify_resume+0xb9/0x890 [<c01032d2>] work_notifysig+0x13/0x21 other info that might help us debug this: 3 locks held by write-truncate-/3465: #0: (jbd2_handle){+.+...}, at: [<c02e1f8f>] start_this_handle+0x38f/0x5c0 #1: (&ei->i_data_sem){++++..}, at: [<c02a57f6>] ext4_get_blocks+0xb6/0x450 #2: (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370 stack backtrace: Pid: 3465, comm: write-truncate- Not tainted 2.6.32-rc7 #18 Call Trace: [<c0524cb3>] ? printk+0x1d/0x22 [<c017ac9a>] print_circular_bug+0xca/0xd0 [<c017d361>] __lock_acquire+0x1091/0x1260 [<c016bca2>] ? sched_clock_local+0xd2/0x170 [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c025e73b>] ? dquot_claim_space+0x3b/0x1b0 [<c0527191>] down_read+0x51/0x90 [<c025e73b>] ? dquot_claim_space+0x3b/0x1b0 [<c025e73b>] dquot_claim_space+0x3b/0x1b0 [<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380 [<c02d210a>] ext4_mb_new_blocks+0x34a/0x530 [<c02c601d>] ? ext4_ext_find_extent+0x25d/0x280 [<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0 [<c016bca2>] ? sched_clock_local+0xd2/0x170 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c016beef>] ? cpu_clock+0x4f/0x60 [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0 [<c052712c>] ? down_write+0x8c/0xa0 [<c02a5966>] ext4_get_blocks+0x226/0x450 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c016beef>] ? cpu_clock+0x4f/0x60 [<c017908b>] ? trace_hardirqs_off+0xb/0x10 [<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0 [<c01d69cc>] ? find_get_pages_tag+0x16c/0x180 [<c01d6860>] ? find_get_pages_tag+0x0/0x180 [<c02a73bd>] ? __mpage_da_writepage+0x16d/0x1a0 [<c01dfc4e>] ? pagevec_lookup_tag+0x2e/0x40 [<c01ddf1b>] ? write_cache_pages+0xdb/0x3d0 [<c02a7250>] ? __mpage_da_writepage+0x0/0x1a0 [<c02a6ed6>] ext4_da_writepages+0x506/0x790 [<c016beef>] ? cpu_clock+0x4f/0x60 [<c016bca2>] ? sched_clock_local+0xd2/0x170 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c02a69d0>] ? ext4_da_writepages+0x0/0x790 [<c01de272>] do_writepages+0x22/0x50 [<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80 [<c01d7b9b>] filemap_flush+0x2b/0x30 [<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60 [<c029e595>] ext4_release_file+0x75/0xb0 [<c0216b59>] __fput+0xf9/0x210 [<c0216c97>] fput+0x27/0x30 [<c02122dc>] filp_close+0x4c/0x80 [<c014510e>] put_files_struct+0x6e/0xd0 [<c01451b7>] exit_files+0x47/0x60 [<c0146a24>] do_exit+0x144/0x710 [<c017b163>] ? lock_release_holdtime+0x33/0x210 [<c0528137>] ? _spin_unlock_irq+0x27/0x30 [<c0147028>] do_group_exit+0x38/0xa0 [<c017babb>] ? trace_hardirqs_on+0xb/0x10 [<c0159abc>] get_signal_to_deliver+0x2ac/0x410 [<c0102849>] do_notify_resume+0xb9/0x890 [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0 [<c017b163>] ? lock_release_holdtime+0x33/0x210 [<c0165b50>] ? autoremove_wake_function+0x0/0x50 [<c017ba54>] ? trace_hardirqs_on_caller+0x134/0x190 [<c017babb>] ? trace_hardirqs_on+0xb/0x10 [<c0300ba4>] ? security_file_permission+0x14/0x20 [<c0215761>] ? vfs_write+0x131/0x190 [<c0214f50>] ? do_sync_write+0x0/0x120 [<c0103115>] ? sysenter_do_call+0x27/0x32 [<c01032d2>] work_notifysig+0x13/0x21 CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Ben Hutchings authored
commit bf988435 upstream. struct ethtool_rxnfc was originally defined in 2.6.27 for the ETHTOOL_{G,S}RXFH command with only the cmd, flow_type and data fields. It was then extended in 2.6.30 to support various additional commands. These commands should have been defined to use a new structure, but it is too late to change that now. Since user-space may still be using the old structure definition for the ETHTOOL_{G,S}RXFH commands, and since they do not need the additional fields, only copy the originally defined fields to and from user-space. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Corey Minyard authored
commit fcc6cb78 upstream. RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Oliver Neukum authored
commit 63ab71de upstream. This device needs to be reset when resuming Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit 20a12f00 upstream. Super speed is also fast enough to let sisusbvga operate. Therefor expand the checks. Signed-off-by:
-
Paul Mortier authored
commit 47f19c0e upstream. When an attempt is made to read the interface strings of the Artisman Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written to the dmesg log (uhci_result_common: failed with status 440000) and the dongle resets itself, resulting in a disconnect/reconnect loop. Adding the dongle to the list of devices in quirks.c, with the same quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D joystick, stops the device from resetting and allows it to be used with no problems. Signed-off-by:
Paul Mortier <mortier@btinternet.com> Signed-off-by:
-
Dennis Jansen authored
commit 7595931c upstream. usbserial: Add AMOI Skypephone S2 support. This patch adds support for the AMOI Skypephone S2 to the usbserial module. Tested-by:
Dennis Jansen <Dennis.Jansen@web.de> Signed-off-by:
-
Colin Leitner authored
commit 77dbd74e upstream. ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by:
Colin Leitner <colin.leitner@googlemail.com> Signed-off-by:
-
august huber authored
commit 9d72c81d upstream. Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c Allows use of 3G radio only Signed-off-by:
August Huber <gus@pbx.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by:
-
Ömer Sezgin Ugurlu authored
commit 646d90e2 upstream. Signed-off-by:
Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com> Signed-off-by:
-
Jon Povey authored
commit b23097b7 upstream. Call put_tty_driver() in cleanup function, to fix Oops when trying to open gadget serial char device after module unload. Signed-off-by:
Jon Povey <jon.povey@racelogic.co.uk> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Jon Povey authored
commit 44a0c019 upstream. No longer set low_latency flag as it causes this warning backtrace: WARNING: at kernel/mutex.c:207 __mutex_lock_slowpath+0x6c/0x288() Fix associated locking and wakeups. Signed-off-by:
-
Alan Stern authored
commit 48826626 upstream. This patch (as1403) is a partial reversion of an earlier change (commit 5f677f1d "USB: fix remote wakeup settings during system sleep"). After hearing from a user, I realized that remote wakeup should be enabled during system sleep whenever userspace allows it, and not only if a driver requests it too. Indeed, there could be a device with no driver, that does nothing but generate a wakeup request when the user presses a button. Such a device should be allowed to do its job. The problem fixed by the earlier patch -- device generating a wakeup request for no reason, causing system suspend to abort -- was also addressed by a later patch ("USB: don't enable remote wakeup by default", accepted but not yet merged into mainline). The device won't be able to generate the bogus wakeup requests because it will be disabled for remote wakeup by default. Hence this reversion will not re-introduce any old problems. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Pavel Roskin authored
commit c0087580 upstream. Signed-off-by:
Pavel Roskin <proski@gnu.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Stephane Glondu authored
commit 488d3749 upstream. The Hercules Wireless N USB mini (HWNUm-300) uses the RTL8191S chipset and seems to work with this driver. Signed-off-by:
Stephane Glondu <steph@glondu.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Stefano Stabellini authored
commit ff487808 upstream. hpet_disable is called unconditionally on machine reboot if hpet support is compiled in the kernel. hpet_disable only checks if the machine is hpet capable but doesn't make sure that hpet has been initialized. [ tglx: Made it a one liner and removed the redundant hpet_address check ] Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by:
Venkatesh Pallipadi <venki@google.com> LKML-Reference: <alpine.DEB.2.00.1007211726240.22235@kaball-desktop> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Nicolas Pitre authored
commit 0ebe25f9 upstream. From: Bin Yang <bin.yang@marvell.com> Signed-off-by:
Bin Yang <bin.yang@marvell.com> Signed-off-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Catalin Marinas authored
commit 2503a5ec upstream. RealView boards with certain revisions of the L220 cache controller (ARM11* processors only) may have issues (hardware deadlock) with the recent changes to the mb() barrier implementation (DSB followed by an L2 cache sync). The patch redefines the RealView ARM11MPCore mandatory barriers without the outer_sync() call. Tested-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 3fea6026 upstream. The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Kamal Mostafa authored
commit 3e1bbc8d upstream. Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up i8042 and breaking the touchpad. Add this model to i8042_dmi_noloop_table[] to resolve. BugLink: https://bugs.launchpad.net/bugs/580664Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Or Gerlitz authored
commit 7a52b34b upstream. Sumeet Lahorani <sumeet.lahorani@oracle.com> reported that the IPoIB child entries are world-writable; however we don't want ordinary users to be able to create and destroy child interfaces, so fix them to be writable only by root. Signed-off-by:
Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Yinghai Lu authored
commit fd19dce7 upstream. Found one x2apic system kexec loop test failed when CONFIG_NMI_WATCHDOG=y (old) or CONFIG_LOCKUP_DETECTOR=y (current tip) first kernel can kexec second kernel, but second kernel can not kexec third one. it can be duplicated on another system with BIOS preenabled x2apic. First kernel can not kexec second kernel. It turns out, when kernel boot with pre-enabled x2apic, it will not execute disable_local_APIC on shutdown path. when init_apic_mappings() is called in setup_arch, it will skip setting of apic_phys when x2apic_mode is set. ( x2apic_mode is much early check_x2apic()) Then later, disable_local_APIC() will bail out early because !apic_phys. So check !x2apic_mode in x2apic_mode in disable_local_APIC with !apic_phys. another solution could be updating init_apic_mappings() to set apic_phys even for preenabled x2apic system. Actually even for x2apic system, that lapic address is mapped already in early stage. BTW: is there any x2apic preenabled system with apicid of boot cpu > 255? Signed-off-by:
Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4C3EB22B.3000701@kernel.org> Acked-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Mark Brown authored
commit 3c070939 upstream. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
-
Marek Szyprowski authored
commit 9d51a6b2 upstream. System will crash sooner or later once the memory with the code of the s3c-sdhci.ko module is reused for something else. I really have no idea how the lack of remove function went unnoticed into the mainline code. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ben Hutchings authored
commit db048b69 upstream. On a 32-bit machine, info.rule_cnt >= 0x40000000 leads to integer overflow and the buffer may be smaller than needed. Since ETHTOOL_GRXCLSRLALL is unprivileged, this can presumably be used for at least denial of service. Signed-off-by:
-
Joakim Tjernlund authored
commit 96fc3a45 upstream. The ds1307 driver misreads the ds1388 registers when checking for 12 or 24 hour mode. Instead of checking the hour register it reads the minute register. Therefore the driver thinks minutes >= 40 has the 12HR bit set and resets the minute register by zeroing the high bits. This results in minutes are reset to 0-9, jumping back in time 40 or 50 minutes. The time jump is also written back to the RTC. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by:
-
