- 22 Nov, 2023 6 commits
-
-
Andy Shevchenko authored
Move existing condition to while(), so it will be clear on what circumstances the loop is successfully finishing. Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Jani Nikula authored
Drop the unused parameter. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jani Nikula authored
The lowest level functions are about setting GPIO values, not about executing any sequences anymore. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jani Nikula authored
With the various sequence versions and pointer increments interleaved, it's a bit hard to decipher what's going on. Add separate paths for different sequence versions. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jani Nikula authored
Follow the contemporary conventions. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jani Nikula authored
Purely a guess. Drop the nop function. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 21 Nov, 2023 11 commits
-
-
Imre Deak authored
Reuse intel_dp_max_data_rate() and intel_dp_effective_data_rate() in intel_link_compute_m_n(), instead of open-coding the equivalent. Note the kbit/sec -> kByte/sec unit change in the M/N values, but this not reducing the precision, as the link rate value is based anyway on a less precise 10 kbit/sec value. Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-12-imre.deak@intel.com
-
Imre Deak authored
Simplify intel_dp_max_data_rate() using drm_dp_bw_channel_coding_efficiency() to calculate the max data rate for both DP1.4 and UHBR link rates. This trades a redundant multiply/divide for readability. Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Callers of intel_dp_max_data_rate() use the return value as an upper bound for the BW a given mode requires. As such the rounding shouldn't result in a bigger value than the actual upper bound. Use round-down instead of -closest accordingly. Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Imre Deak authored
Atm the allocated MST PBN value is calculated from the TU size (number of allocated MTP slots) as PBN = TU * pbn_div pbn_div being the link BW for each MTP slot. For DP 1.4 link rates this worked, as pbn_div there is guraranteed to be an integer number, however on UHBR this isn't the case. To get a PBN, TU pair where TU is a properly rounded-up value covering all the BW corresponding to PBN, calculate first PBN and from PBN the TU value. Calculate PBN directly from the effective pixel data rate, instead of calculating it indirectly from the corresponding TU and pbn_div values (which are in turn derived from the pixel data rate and BW overhead). Add a helper function to calculate the effective data rate, also adding a note that callers of intel_dp_link_required() may also need to check the effective data rate (vs. the data rate w/o the BW overhead). While at it add a note to check if WA#14013163432 is applicable. v2: - Fix PBN calculation, deriving it from the effective data rate directly instead of using the indirect TU and pbn_div values for this. - Add a note about WA#14013163432. (Arun) v3: - Fix rounding up quotient while calculating remote_tu. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (v1) Signed-off-by:
-
Imre Deak authored
The next patch will calculate the PBN value directly from the pixel data rate and the BW allocation overhead, not requiring the data, link M/N and TU values for this. To prepare for that move the calculation of BW overheads from intel_dp_mst_compute_m_n() to intel_dp_mst_find_vcpi_slots_for_bpp(). While at it store link_bpp in a .4 fixed point format. Reviewed-by:
Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by:
-
Imre Deak authored
The link M/N ratio is the data rate / link symbol clock rate, fix things up accordingly. On DP 1.4 this ratio was correct as the link symbol clock rate in that case matched the link data rate (in bytes/sec units, the symbol size being 8 bits), however it wasn't correct for UHBR rates where the symbol size is 32 bits. Kudos to Arun noticing in Bspec the incorrect use of link data rate in the ratio's N value. Reviewed-by:
-
Imre Deak authored
Apply the correct BW allocation overhead and channel coding efficiency on UHBR link rates, similarly to DP1.4 link rates. Reviewed-by:
-
Imre Deak authored
Replace intel_dp_is_uhbr_rate() with the recently added drm_dp_is_uhbr_rate(). Reviewed-by:
-
Imre Deak authored
Add kunit test cases for drm_dp_get_vc_payload_bw() with all the DP1.4 and UHBR link configurations. v2: - List test cases in decreasing rate,lane count order matching the corresponding DP Standard tables. (Ville) - Add references to the DP Standard tables. v3: - Sort the testcases properly. v4: - Avoid 'stack frame size x exceeds limit y in drm_test_dp_mst_calc_pbn_div()' compiler warn. (LKP) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: kernel test robot <lkp@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3) Signed-off-by:
-
Imre Deak authored
The current way of calculating the pbn_div value, the link BW per each MTP slot, worked only for DP 1.4 link rates. Fix things up for UHBR rates calculating with the correct channel coding efficiency based on the link rate. v2: - Return the fractional pbn_div value from drm_dp_get_vc_payload_bw(). v3: - Fix rounding up quotient while calculating req_slots. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Imre Deak authored
On UHBR links the PBN divider is a fractional number, accordingly store it in fixed point format. For now drm_dp_get_vc_payload_bw() always returns a whole number and all callers will use only the integer part of it which should preserve the current behavior. The next patch will fix drm_dp_get_vc_payload_bw() for UHBR rates returning a fractional number for those (also accounting for the channel coding efficiency correctly). Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Wayne Lin <wayne.lin@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
- 20 Nov, 2023 4 commits
-
-
Ville Syrjälä authored
IVB Bspec says: "Frame Buffer Compression is only supported with memory surfaces of 4096 lines or less and pipe source sizes of 4096 pixels by 2048 lines or less. " so seems like we should be able to bump the offset+size limit to at least 4kx4k. Make it so. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
-
Ville Syrjälä authored
FBC on icl+ should supposedly be fine with surface sizes up to 8kx4k. Bump up the limit. Signed-off-by:
-
Ville Syrjälä authored
Do separate checks for the visible plane size vs. the surface size (which I take to mean offset+size). For now both use the same max w/h, but we can relax the surface size limits as a followup. Signed-off-by:
-
Ville Syrjälä authored
Unfortunately even the HPD based detection added in commit cfe5bdfb ("drm/i915: Check HPD live state during eDP probe") fails to detect that the VBT's eDP/DDI-A is a ghost on Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD asserted despite nothing being actually connected there :( The straps/fuses also indicate that the eDP port is present. So if one boots with a VGA monitor connected the eDP probe will mistake the DP->VGA converter hooked to DDI-E for an eDP panel on DDI-A. As a last resort check what kind of DP device we've detected, and if it looks like a DP->VGA converter then conclude that the eDP port should be ignored. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636 Fixes: cfe5bdfb ("drm/i915: Check HPD live state during eDP probe") Signed-off-by:
-
- 17 Nov, 2023 4 commits
-
-
Jani Nikula authored
vlv_dpio_read() and vlv_dpio_write() really operate on the phy, not pipe. Passing the pipe instead of the phy as parameter is supposed to be a convenience, but when the caller has the phy, it becomes an inconvenience. See e.g. chv_dpio_cmn_power_well_enable() and assert_chv_phy_powergate(). Figure out the phy in the callers, and pass phy to the dpio functions. v2: retract one overzealous pipe->phy change (Ville) Reviewed-by:
-
Jani Nikula authored
Add a helper with better typing and handing for bogus input, and better in line with vlv_dig_port_to_channel(), vlv_dig_port_to_phy(), and vlv_pipe_to_channel(). Reviewed-by:
-
Jani Nikula authored
Considering what the functions do, intel_dpll.c is a more suitable location, and lets us make some functions static while at it. This also means intel_display.c no longer does any DPIO access. Reviewed-by:
-
Jani Nikula authored
Like the comment says, /* Grouping using anonymous structs. Keep sorted. */ Stick to it. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114155528.96935-1-jani.nikula@intel.com
-
- 16 Nov, 2023 1 commit
-
-
Animesh Manna authored
Refactor DSB implementation to be compatible with Xe driver. v1: RFC version. v2: Make intel_dsb structure opaque from external usage. [Jani] v3: Rebased on latest. v4: - Add boundary check in dsb_buffer_memset(). [Luca] - Use size_t instead of u32. [Luca] v5: WARN_ON() added for out of boudary case with some optimization. [Luca] v6: Rebased on latest and fix a rebase-miss. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110032518.3564279-1-animesh.manna@intel.com
-
- 15 Nov, 2023 3 commits
-
-
Imre Deak authored
Convert crtc_state->pipe_bpp to U6.4 format as expected by the rest of the function. Fixes: 59a266f0 ("drm/i915/display: Store compressed bpp in U6.4 format") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Animesh Manna authored
Add debugfs support which will print source and sink status per connector basis. Existing i915_psr_status and i915_psr_sink_status will be used to get the source and sink status of panel replay. v1: Initial version. [rb-ed by Arun] v2: Added check for DP 2.0 and connector type in connector_debugfs_add(). v3: Optimization and cosmetic changes. [Jouni] Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-7-animesh.manna@intel.com
-
Vinod Govindapillai authored
FIFO underruns are observed when FBC is enabled on plane 2 or plane 3. Recommended WA is to update the FBC enabling sequence. The plane binding register bits need to be updated separately before programming the FBC enable bit. Bspec: 74151 Reviewed-by: Mika Kahola <mika.kahola@intel.com> #v3 Signed-off-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
- 14 Nov, 2023 10 commits
-
-
Imre Deak authored
At least a Realtek DP branch device with the OUI 00-e0-4c dev-ID Dp1.4 HW-rev 1.0 SW-rev 131.1 device identification doesn't report detecting the FEC decoding start symbol. Tune down the corresponding error to a debug message. Reviewed-by:
-
Mika Kahola authored
At least one TGL had regression when using u8 types for entry setup frames calculation. So, let's switch to use ints instead. intel_psr_entry_setup_frames() function expects to return u8 but since in case of error the error code -ETIME is returned. This doesn't fit into u8 and hence the return value is not as expected. Fixes: 2b981d57 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier") Signed-off-by:
-
Swati Sharma authored
If force_dsc_fractional_bpp_en is set through debugfs allow DSC iff compressed bpp is fractional. Continue if the computed compressed bpp turns out to be a integer. v2: -Use helpers for fractional, integral bits of bits_per_pixel. (Suraj) -Fix comment (Suraj) Signed-off-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-9-ankit.k.nautiyal@intel.com
-
Swati Sharma authored
DSC_Sink_BPP_Precision entry is added to i915_dsc_fec_support_show to depict sink's precision. Also, new debugfs entry is created to enforce fractional bpp. If Force_DSC_Fractional_BPP_en is set then while iterating over output bpp with fractional step size we will continue if output_bpp is computed as integer. With this approach, we will be able to validate DSC with fractional bpp. v2: Add drm_modeset_unlock to new line(Suraj) Signed-off-by:
Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by:
-
Ankit Nautiyal authored
This patch adds support to iterate over compressed output bpp as per the fractional step, supported by DP sink. v2: -Avoid ending up with compressed bpp, same as pipe bpp. (Stan) Signed-off-by:
-
Vandita Kulkarni authored
Consider the fractional bpp while reading the qp values. v2: Use helpers for fractional, integral bits of bits_per_pixel. (Suraj) Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Ankit Nautiyal authored
MTL+ supports fractional compressed bits_per_pixel, with precision of 1/16. This compressed bpp is stored in U6.4 format. Accommodate the precision during calculation of transfer unit data for hblank_early calculation. v2: -Fix tu_data calculation while dealing with U6.4 format. (Stan) v3: -Use BPP_X16_FMT to print vdsc bpp. Signed-off-by:
-
Ankit Nautiyal authored
MTL+ supports fractional compressed bits_per_pixel, with precision of 1/16. This compressed bpp is stored in U6.4 format. Accommodate this precision while computing m_n values. v1: Replace the computation of 'data_clock' with 'data_clock = DIV_ROUND_UP(data_clock, 16).' (Sui Jingfeng). v2: Rebase and pass bits_per_pixel in U6.4 format. Signed-off-by:
-
Ankit Nautiyal authored
DSC parameter bits_per_pixel is stored in U6.4 format. The 4 bits represent the fractional part of the bpp. Currently we use compressed_bpp member of dsc structure to store only the integral part of the bits_per_pixel. To store the full bits_per_pixel along with the fractional part, compressed_bpp is changed to store bpp in U6.4 formats. Intergral part is retrieved by simply right shifting the member compressed_bpp by 4. v2: -Use to_bpp_int, to_bpp_frac_dec, to_bpp_x16 helpers while dealing with compressed bpp. (Suraj) -Fix comment styling. (Suraj) v3: -Add separate file for 6.4 fixed point helper(Jani, Nikula) -Add comment for magic values(Suraj) v4: -Fix checkpatch warnings caused by renaming(Suraj) v5: -Rebase. -Use existing helpers for conversion of bpp_int to bpp_x16 and vice versa. Signed-off-by:
-
Ankit Nautiyal authored
Add helper to get the DSC bits_per_pixel precision for the DP sink. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-2-ankit.k.nautiyal@intel.com
-
- 13 Nov, 2023 1 commit
-
-
Mika Kahola authored
Add state verification for C20 as we have one for C10. V2: Use abstractation of HW readout (Gustavo) Drop MPLLA/B from message for TX and CMN parameters (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> (v1,v2) Signed-off-by:
-
